Blue screen with flashing folder and question mark on startup

Hello.
I need help with my Macbook Pro. I get a blue screen with a flashing folder and a question mark at start up. To date I have tried the following:
Apple Hardware (Extensive) Test (Results: "No Trouble Found")
Safe Boot
Reset NVRAM
Reinstall OS X via the internet (I received no discs when I purchased it). I select the StartUp Disk to reinstall. When reinstalling via the internet I get to a point of reinstalling Mountain Lion but it asks me to choose a drive - yet there are no drive options to choose from. Then a window comes up asking me to "Select the system you want to use to start up your computer" but no options appear. When I choose "Restart" a note pops up saying "You can't change the startup disk to the selected disk. Startup Disk could not gather enough information on the selected disk."
The only option is "Restart" from the Apple menu. When I choose that it goes back to the original "Blue screen with flashing folder and question mark on startup."
I have no Time Machine
I can't access the disc utility.
Are there any ideas as to what might be the problem?

Your hard drive has likely failed and needs replaced. That would explain why the system does not display it when you attempt to reinstall the OS via Internet Recovery.

Similar Messages

My 2011 iMac wont boot up and stuck on white screen with flashing folder and question mark ???

Im running Lion OS and I made update after it asks me to restart the iMac when i pressed restart it never boots again :S please help and how i can get my data back

Try starting the it by holding down the shift key (safe mode) if it starts then check your hard drive with disk utility. Also repair your disk permissions. If you are unable to start the computer try Lion recovery mode.

HT1379 I have lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

I have lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

Welcome to the Apple Support Communities
Lion uses Recovery to reinstall OS X. Press Command and R keys when your Mac starts, open Disk Utility, erase the drive and reinstall Lion. The other Mac has probably got its hard disk damaged, so take the Mac to an Apple Store

HT1941 grey screen with a folder and question mark

On start up i get a grey screen with a folder and question mark- how do i get out of this?

10.8 Mountain Lion
http://support.apple.com/kb/PH11046
Use Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH4405

Can't log in white screen with flashing file and Question mark

I've been have trouble with getting on line and screen freezing up. Now I have a solid white screen with a icon of a file and question mark on it flashing. Iv tried unplugging and resetting with no luck.

Have a look at > A flashing question mark appears when you start your Mac
Dennis

Getting white screen with file folder and question mark on it...help

My MacBook Pro starts up and only shows a white screen with a file folder with question mark on it. I have not had problems prior to this. Help!,

That means that no valid system could be found to boot from. What might have caused that is hard to say, but try referring to this document:
http://support.apple.com/kb/ts1440
Note that if you are using Mac OS X 10.7 (Lion), you don't start up from your install disk. Hold down command-R at startup instead.

Flashing Folder and Question Mark, no installation disc

Yesterday, Safari froze up while I was it which I have never had happen before. So, I manually shut my Macbook off and tried to restart. When I did so, I received a gray screen with a flashing folder and question mark. From my research, I have found that usually this means that my laptop can't find the operating system and this issue can usually be resolved by inserting the installation disc. Problem is, I bought my Macbook secondhand and never got an installation disc. Does anyone know of a way around this issue? Or if buying the Snow Leopard upgrade for $30 instead of buying a whole new package for about a hundred dollars more might resolve this issue?
Thanks so much,
Kristin

Yes, quite a quandary. You have some options:
1. Call AppleCare and ask for customer support. You can order replacement discs for the model you have.
2. Purchase an OS X retail installer suitable for your model, like Snow Leopard, that you can use to determine if you can repair the hard drive or will nee to reinstall OS X. If the latter and you are using Snow Leopard, then you just install it. The installer will determine whether to upgrade or not automatically. As long as your drive is OK Snow Leopard will not erase the drive so all your files are safe. If you use an earlier version of OS X then you want to choose the Archive and Install option. See the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Mac won't boot up..get gray screen with a folder and ? mark what do i do?

my mac pro won't boot up..get gray screen with a folder and ? mark on the folder..help

Hi,
Rather than write up what I did, here is a link to an Apple support document with the instructions to follow.
I hope this is helpful. Good luck.
http://support.apple.com/kb/ts1440

My iMac wont go past the grey screen with Apple Logo and question mark a caution mark

My iMac wont go past the grey screen with Apple Logo and question mark a caution mark

You may find this support article helpful:
http://support.apple.com/kb/TS2570
Ciao.

Mac book pro 13 inch flashing folder and question mark

when i restarted my computer last night a white screen appeared with a flashing folder and a question mark. I'm just trying to determine what the issue is, is the hard drive shot? I've inserted my installation disc to re download the software but it will not recognize anywhere to download the software to...

Check the Disk Utility. If the drive shows up there, repair or erase it. If not, it's either become unplugged or is dead.
(66650)

My Macbookpro will not start up. At first it was showing a gray screen with a flashing folder and question mark. I went through the steps to repair with disc utility and this did not work. How do I back up my data, without time machine activated?

I need to back up my files and date before erasing my drive, but my time machine backup is not coming up. How do I access my hard drive to back up my files?

A erase of the drive or boot partition is not always necessary.
Flashing question mark at boot could be a easy fix, sometimes it's the firmware that simply forgot what bootable volume to boot from.
Try holding the Option key down while booting the machine, a choice of bootable options appears, select your OS X and boot up.
When you get in, head to System Preferences > Startup disk and set it again new. This will tell the firmware what to boot from. Test it to see.
Now if you don't have a selection of bootable options, it could be that the drive is dead, or OS X is erased or corrupted so it can't boot.
You'll have to run through this list of fixes to see what's going on, if you need a hardware fix or what, I've also included links if you can't fix it and need to recover your data etc.
(If it's not remmebering your boot selection then also run through the list to reset things.)
Step by Step to fix your Mac

Mac book is starting up funny. I have a flashing folder and question mark or just a grey screen. IT at university is backed up all week and said it's the hard drive! Ugh need help in class now will be calling ASAP! Help please.

I get either a grey screen or a flashing folder question mark. IT at my university said it wouldn't be till after the weekend and than still a few days to get it fixed so she told me to try to back it up myself because that's the only sure fire way to ensure I get all my Info. So any hints or help? They did a hardware test and they think it's my hard drive. I did a r+command restart
And it won't let me verify the disk.... Or download mountain lion.. Okay I know I sound clueless but can anyone help me?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

MacBook Pro starts up with blinking folder and question mark in it. Is there a fix to this issue or has the HDD crashed for good?

I startup my mac and I see a white screen background with a folder icon in the center and a question mark blinking in the center. Called Apple and the rep says this is probably a HDD crash. Only solution is to take it into a Apple store and get a replacement HDD which would cost $300 and upwards. This mac book is about 15 months old and cost $1300. Needless to say I'm highly upset. Does anyone have a fix to this?

Flashing folder with question mark?
Go step by step and test.
http://support.apple.com/kb/ts1440
Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH4405
Reinstall OS X
http://support.apple.com/kb/PH10763?viewlocale=en_US

Grey screen with file folder blinking question mark in middle of folder

My Macbook suddenly turned off leaving me with a grey screen. In the middle of the screen there is a file folder blinking with a question mark in the middle of the folder. It will not turn back on even if I attempt to restart it. What does this mean and can I fix it myself or must it be sent to apple.

This may help: A flashing question mark appears when you start your Mac.
If none of the solutions work then you will need to do an Archive and Install:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Why does my computer keep showing a flashing folder and question mark and sometimes a prohibit sign?

Lately whenever I bootup my 13in Macbook Pro (Late2011) it starts off as usualy but than the apple logo turns into a blinking folder thats has a question mark on it or a blinking prohibit sign. So confused on what to do. Please help!!

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
Mac OS X- Gray screen or prohibitory sign appears during startup
In most cases the problems may be caused by one or more of these:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Blue screen with flashing folder and question mark on startup

Similar Messages

Maybe you are looking for