Blue screens with Boot Camp Drivers?

Recently my Bootcamp Windows 7 install started getting random blue screens. I enabled the Windows Driver Verifier and the blue screens show up as BAD_POOL_CALLER at wdf01000.sys. If I inspect the blue screen dumps, it points me to the error being in MacHALdriver.sys
I reinstalled Windows 7, and ran it with the Verifier to ensure the install was clean. It was. The Verifier triggered the same blue screen during the installation of the Boot Camp drivers. Please point me in the right direction with this issue. Thanks!
The Bootcamp drivers were downloaded today from Apple. Version 5.0 build 5033.

Actually it is a problem specific to later model Macs.
If your Mac was manufactured after the release of Leopard (or whatever is the current MacOS), then there's a **** good chance that the Windows drivers on the MacOS disk won't drive your specific hardware. This happened on my late model iMac ... with the MacOsX 10.5 DVD crashing like crazy when installing drivers as part of the Bootcamp install. Never even got around to installing the BC Control panel, most of the drivers were improperly installed or not at all, and the Windows New Hardware Wizard never registered any installs.
Crash City.
It would be nice if Apple kept updated versions of the Windows Setup program available at Apple.com ... with all the current Windows drivers for the current Mac hardware in them. Hey, I could copy that onto a USB drive or DOS formatted CD, boot Windows, copy the file onto the Windows partition, run it ... and then Bootcamp would operate well.
Just my 2 cents worth ...
Regards,

Similar Messages

Black/Blank Screen with Boot Camp Win 7 Install on new 27" iMac

I'm having a problem getting Windows 7 on a new 27" iMac and am familiar with the Boot Camp Windows installation process. Here's what I've done...
1. Run Boot Camp from OSX, partition the drive.
2. Insert Win 7 cd, proceed with installation.
3. Computer restarts and the 'preparing for initial setup' message displays with the Win 7 splash screen. When it switches to where it should be displaying the Win 7 desktop, the screen is black.
I can hear the Mac still running, but there's no display. It's like it's waiting for some type of user input for the intial Windows setup (haven't yet entered the key).
I've done a hard shutdown and restarted Windows with the exact same result. After reboot, I get the 'Windows was not shut down properly' message with the 3 safe mode options, where choosing either gets me the 'Windows cannot complete setup in safe mode'. And any key reboots it.
The Mac side still runs fine and holding the option key at start up gives the Mac/Win boot options.
I'm inclined to think that it's a video driver issue since the 27" is brand new. Maybe Apple used a new video card for the larger screen and haven't updated the Boot Camp drivers. I checked on ATI's site for an updated driver for the Radeon HD 4670 they say is in the new 27" model that's currently available. (not the quad core)
Is there any workaround for this? I was thinking of installing Vista instead, and upgrading to Win7 once installed, but if it's a driver thing, it would just be a long way to the same result and could have the same problem with Vista as well.
Any ideas?

I think I figured out what is happening here with the video drivers on the new iMac's and Win7. I believe it's re-directing the video to the mini display-port output when you see the screen go blank. I installed my Win7 x64 with no issues but I had an external monitor hooked up at the time and while it was installing the O/S my iMac went black but everything moved over to my external screen. Once it finished installing then everything went back to normal after a reboot.
Not sure if that helps anyone but pretty sure that's what is going on. So if you have another monitor handy, get the mini display-port adaptor from Apple and connect your external screen before you install Win7. Cheers!
P.S. If you have one of the new iMac's and want to install the latest Radeon drivers (after you have installed Win7 on your iMac), try the following. Download and install the drivers from ATI/AMD directly. They'll try to install and fail (no worries) but now the driver/install files will be unzipped into an ATI folder on your main Windows hard drive.
Now go to this site: http://www.driverheaven.net/modtool.php and download the tool and use the Vista instructions listed on the main page of the URL above. You shouldn't need to download the MSXML 6.0 and I don't think you need to disable the UAC stuff like they suggest for Vista (I didn't) and it works fine. UAC is not nearly as intrusive on Win7 as it is in Vista so I think that's why it worked for me and pretty sure the MSXML 6.0 is already in Win7. Once the program has modified the mobile Radeon drivers then you can run "setup" from your ATI directory and the new drivers will finally install correctly including the Catalyst Control Center. Voila! I now have 9.10 drivers up and running on my new 27" iMac and working perfectly so far.
James
Message was edited by: joudbren

Help with Boot Camp Drivers

Sorry if this is in the wrong section, but I need to know. I have been trying unsuccessfully for about a month now, and I cannot get Boot Camp drivers to work. I have consulted many guides from the internet, gone to a Mac Store for support, no help from either.
I am running on a new Macbook 13 inch with OS X 10.5.6. I have installed Windows XP with SP2 built in, and I have tried installing the drivers with the Leopard CD, with a downloaded drivers CD from a website, but it still doesn't work. I have no idea what I am doing wrong, but none of the drivers work. I see the Boot Camp Control Panel, but the only tabs it has is Power, Brightness, Restart in ..., and Remote. If anybody could help me with installing these drivers, it would be greatly appreciated.

Run Bootcamp assistant and choose to download the (correct) Win drivers for your machine on a USB drive. Then stop the Bootcamp install and go to install the drivers in Win.
Cheers
Simon

Rthdaud.sys blue screens in boot camp

Hi all, have been playing around in boot camp (gaming for the most part) and twice now have, after a few hours of perfectly fine system running, been presented with a blue screen naming rthdaud.sys as the cause. As this is the realtek audio high-def driver, I assume it's part of the boot camp driver package and should be okay.
What would be the first thing to try? Should I reinstall the apple boot camp driver for this? Perhaps get the driver (updated version?) from realtek's website directly? Thanks in advance for any help.

Apple today introduced Boot Camp, new public-beta software for Mac OS X that lets users of Intel Macs boot directly into Microsoft Windows XP. While the move may contradict previous statements by Apple, the company said they still have no intention of fully supporting Windows on the Mac.
People who read this also read:
People Who Like This Also Like
Windows on Mac: What you need to know 21024159
WWDC: Microsoft kills Virtual PC for Mac 21015245
First Look: From the Lab: XP-on-Mac benchmarks 21024413
World Tech Update 21490391
TaskPaper 2.1 21486845
Will Apple's App Store change the desktop app market? 21484083
Recommendations by Loomia
After we released the Intel-based Macs we had a lot of customer requests asking if it’s possible to run Windows on those machines,” Brian Croll, Apple’s senior director of Software Product Marketing, told Macworld. “We decided we would help it along by creating Boot Camp.
The software, available today as a public preview version of a feature from the forthcoming Mac OS X Leopard, includes an assistant application to aid with drive partitioning and the installation of Windows drivers for Mac hardware.
mukesh
Camping-Camping

New MBP Blue Screen on Boot Camp Install

I just installed XP SR2 on my new MBP, when I try to install the drivers from the DVD, it gets about half-way through and then goes to the blue screen of death (BSOD), then restarts...I have tried individually installing the drivers, but I tried to install the wireless "BroadcomInstaller" and it went to a blue screen of death again. The problem is two fold. (1) I have no idea I have having a problem via the DVD install, I know I selected the format correclty (NFTS), and I have tried to install with nothing externally attached. (2) I have no idea what individual drivers I am suppose to install. I have installed BC and XP on another MBP without a hitch. Any suggestions.

Never mind, I just figured out, I own both a MacBook and now my MBP, I was trying to use my MB disc's...I am an idoit! DRC

Can install Windows 7 Pro, but not Boot Camp drivers

I have used Boot Camp assistant to install Windows 7 Pro (64 bit), and built the USB drive with Boot Camp drivers.
Installed on a separate drive on my Mac Pro.
When I install the drivers and reboot, I get an error. Basically Windows says there is an error and it needs to run System Restore in order to roll back to the previous status (ie. remove Boot Camp drivers).
I am using the latest Boot Camp drivers for a Mac Pro (4,1) and 64 bit Windows.
I tried downloading the drivers from Apple's website in Windows, unzipped and installed - same issue.
Windows is not yet registered.... (might that be an issue?)
Grateful for some ideas. I have previously had Win7 running on this machine, and even Win 8 (which crashed - necessitating a roll back to Win 7 whcih is nicer).
TIA

the drivers have a root setup.exe if people have problems with that they can manually navigate to the sub dirs and run the driver installs for the various hardware manually
the various driver exe install will only install if they detect the hardware is there so it's safe to run installers for say a video card ones computer does not have
and if one of the driver don't work of the hardware related to it is defect in some way you can identify which one as the restore would happen right over that driver install
that windows is not registered should not play apart as far as I know

Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

Hi!
I've got a new 27" iMac (late 2013), and I was going to install Windows 8.1 (64-bit) to be able to play a few games.
Everything went smoothly (installed normally via Boot Camp Assistant), and after the Windows setup, the Boot Camp drivers needed to be installed. After this, the computer rebooted, but crashed at a blue screen with the error called "kernel_security_check_failure".
It rebooted a few times on its own, but after a few times, I got some options, and I chose to "refresh" the Windows 8 install, meaning it would reset the install while keeping my files (even though I didn't have any, as I never got to use it). This took some time, but it worked, and it booted into W8.
The Boot Camp drivers had been removed though, so I had to reinstall them. After they had reinstalled, the computer rebooted and the same blue screen with the same error hit me.
Something tells me that some of the BC drivers are messing things up. I can't find any information on this elsewhere.
Would it be possible to install only selected drivers, to eventually find out which driver is causing the problem?
All help is greatly appreciated!

I finally gave up, reloaded everything, this time, using WIn 8.1 Pro, not Enterprise. After I did the updates, patches, Norton 360, shut computer down and connected the external drives, and booted up...and got the BSOD. This time, I went to Microsoft and downloaded the Windows Debugger, and think I may have found the problem...NORTON!
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Am conrtacting them, but, here's the Debugger output:
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
*                        Bugcheck Analysis                                    *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29            int     29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2            xor     edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner

285 GTX Mac and Windows XP booting with Boot Camp - Black Screen

I decided to update my 8800GT to the newer 285 GTX. Loaded the drivers, a must first, then installed the card. Booted the Mac and wow what an inprovement.
Here's where the problems start. I used Boot Camp to boot to my Windows XP 32 install in Bay 2. Got the Windows Start Up screen then nothing but black.
I reinstalled my 8800 GT and restarted the computer. I installed the latest nVidia drivers (190.38) in XP.
I reinstalled the 285 GTX and tries again. Mac worked fine when I restarted in XP got the Windows startup screen then nothing but black.
I could use some answers to solve this problem. I believe the 285 is supposed to work booting Windows from Boot Camp but I can't figure out how to make it work.
Thanks in Advance

I know I saw, and tried to help, someone else with the same questions. At that time I think tried to get them to use Driver Sweeper 2.0 and really uninstall drivers and any leftovers.
So there should be another thread here, but maybe also on eVGA forum.
And it doesn't make sense, unless XP or even Apple's leftover Boot Camp drivers. So look for Driver Sweeper 2.0, works better; and there is a thread on evga for removing graphic driver and upgrade.

Mid-2010 Mac Mini - black screen after installing boot camp drivers

I successfully installed Windows XP Service Pack 2 on my new Mac Mini. The display worked without issue in XP at this point.
After doing this, I proceeded to install the boot camp drivers. They installed and automatically rebooted the machine.
After reboot, Windows XP no longer has a functioning display. The display is a black screen and eventually the monitor shuts off.
Things I've tried:
- Reset PRAM
- Reset SMC
- Tried both Mini DisplayPort and HDMI connections to connect to the HDMI port on the monitor
- Booting into Safe Mode. Holding down F8 successfully brought up the Safe Mode options, but again the display was blank after choosing the Safe Mode option and attempting to load Windows.
Message was edited by: mullingitover

Update: Other stuff I've now tried--
- Swapping out RAM modules. I've tried it with the stock 2GB sticks in place, also with a single 4GB stick. Same result.
Other interesting/troubling problems:
- Unable to boot into Safe Mode with command line. The text-only interface with safe mode options that is reached by pressing F8 during windows startup is displayed. However, no matter which option I choose, the result is a dead display.
- Unable to boot with Windows XP install CD (?!). After choosing the CD at the boot selection screen, the display blanks and never wakes up.

Installed Boot Camp drivers for Windows 7, now black screen!

I have a question--I have a late 2009 iMac with the ATI card, followed Apple's procedure for avoiding the black screen while installing Windows 7 on the partitioned HD, and found I could not update to Boot Camp 3.1 without already having Boot Camp 3.0 from the 10.6 install disc. I inserted the disc, had to perform a workaround because it said I couldn't run 64-bit, and installed the drivers (I assume?) from Boot Camp on the 10.6 disc. When my iMac restarted the screen soon goes black. I guessed I was at the login screen, typed in my name and password, and could hear it logging into Windows--my sound works, Magic Mouse works (no scrolling), etc but no screen after booting up in Windows. Did the Boot Camp drivers from the install disc over-write something that was working? How do I fix this so I can proceed to install the 3.1 and 3.2 Boot Camp updates? Just the ATI* trick? Please help!!!

I'm sorry to take up your time guys - as I wrote earlier I'm not that technical and new to all of this - I was promised that I could do everything the mac way in the windows environment if I bought Parallels Desktop 7 - I only did this as my company is installing af new CRM system that is only supported in Windows - now I have installed everything and find out that the MAC keyboard shortcuts and layout is not working at all in i.e. Outlook etc. and I've totally forgotten how the Windows shortcuts etc. is working - Parallels asked me to go to Apple for help and here I am
You write that "if you believe it's correct do it" - but I don't believe anything else than what I'm told - I'm not going to install anything if I don't know how to do and whether it's correct - I wont have the nerve to do that.
If at least could get a list or someting on how to use my Magic Trackpad in the windows environment I would be happy - then I would just have to switch between how to use it on both sides.
Hope you understand and sorry again for taking up your valuable time

K7N420 Blue screen with audio drivers

Hi guys. I sold my K7N420 to my brother (I went to the dark side :D ) and he got a problems with Windows 2000 server and the latest nVidia 2.03 drivers. The system shows a Blue screen when is booting and the only workaround is booting in safe mode and then deleting the nvidia sound drivers.
It is a clean install of W2K server plus SP3. The machine has no extra hardware installed (I mean, no PCI cards), it has BIOS version 2.7 with the default setting and with the APIC option enabled.
I am thinking it could be DirectX version that comes with the original W2K, but if anyone have a better idea of what is happening, it would be nice.
Thanks,

Quote
Got no other cards in it and bios is resetted to default values so the Duron is running at 900Mhz (100/200/66).
set the fsb to 133 and ram fsb/dram to 1.1
Quote
The problem is: after installing sound drivers PC wont boot, it shows the loading windows logo with the scrollbar and past half the lights on my keyboard blink and then it hangs. Sometimes it shows a blue screen with a message that starts with IRQL_something. If I disable audio in bios, computer starts without problems... any ideas?
either ram, resources, or the irq assignment.
Go to device managers page....view by connection tab, and see if the sound is sharing resources with another major component.
list what you see there.

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

My touchsmart will not boot allI get is a blue screen with f key to do different things

My Touch smart desk top will not boot when I turn it on all I get is a blue screen with HP in the center and f key functions

Hello charleshobby:
Your computers start up has been corrupted. No big deal. Turn on your computer hold down on F-8 key as you turn it on. This should put you in safe mode. If f-8 key fails then just disconnect the power cord at the power adapter and plug it back in and turn on your computer (This is called a fource start up) automatically puts your computer into safe mode. Use your arrow kek select safe mode with net work. Top one I belive. In safe mode close out Help and Support window displayed. Open up Recovery Manger and select Microsoft System Restore. Click next then click next again now a list of dates will appair choose a date before this event occured. Click next and let your computer complete the sytem restore. My guess Microsft up dates caused this issue. After this is finished now go back and change all your update setting to down load up dates but let me choose witch ones to install. Only install three at a time. To a void future occurances and black screen or blue screen issues. Follow these steps for blue screen or black screen. Please click on Kudos if this has resolved your issue. Thank you frrw.

Blue screen with cursor at boot. And everything after that.

Dear Forums,
(Please note, I'll refer to the machine as a Server, but it is only using 10.4 client; I am merely using the Sharing capabilities of such).
I have a MDD G4 that I'm using as a server. When I start it up, I get the Blue Screen with Cursor (BSwC) at boot - and it never goes past that. (Can't move the cursor either).
I have read the articles
http://docs.info.apple.com/article.html?artnum=106464
And Dr. Smoke's
http://www.thexlab.com/faqs/startupitems.html
http://www.thexlab.com/faqs/repairprocess.html
I've also tried AppleJack and clearing out caches, zapping PRAM, etc. All the standard fare.
It will boot into safe mode just fine, and it is still acting as a server just fine.
I have also tried Multiple Users (to no avail).
I tried a reinstall of Tiger, which, interestingly enough, didn't give me the option for Archive and Install and Preserve, but instead only gave me the option to Upgrade (hm, from Tiger to Tiger). While this fixed nothing, the server continued to work after this.
Then I had the bright idea to install the OS to the 2nd drive I had within. 'Surely this would work,' I thought. But alas. It did not. In fact, clean installation, new disk, (and yes, I booted from this 2nd disk), the same BSwC problem.
So, please, Dear Apple Support Discussions, let there be someone out there smarter than I (I'm really not that smart, but I do follow instructions well).
-Ty

How long did you wait for the blue screen to go away? I also have a iMac G5 2GHz ALS.
My computer has been having a problem where on the first boot of the day, it it would hang in the gray screen for about 1.5 minutes and the blue screen for about 4 minutes. I thought it was permanently hung but discovered that it would eventually present the login screen. I could then login normally but none of my firewire external drives would mount. I could restart over and over and the same situation would be present.
Resetting the SMU seems to cure the problem and rebooting would be quick and all firewire drives mounted correctly. I could then reboot as many times after and normal behavior of the iMac would be repeatable.
However after having the system down for several hours and restarting it, the problem would be back.
I have now moved all my firewire drives to a powered hub and will watch over the next day or so to see if that changed anything.
Robert

Blue screens with Boot Camp Drivers?

Similar Messages

Maybe you are looking for