Blue Shapes Occuring Randomly(Not Line Problem)

Blue Shapes Occuring Randomly(Not Line Problem)
I have just purchased my powerbook 1.67 1440*960. I started to see blue shapes around the windows that I move and around many things that move on the sceen after the first week of my purchase. At first I thought this was a configuration problem but it seems more like an hardware problem although the hardware test found all the devices successfull.
In addition, when I installed call of duty, the blue shapes occur very fast and randomly everywhere on the screen making it impossible to play the game.
You could have a look at the picture to see how disturbing they are.
http://homepage.mac.com/altan.sursal/FileSharing1.html
Does anybody have an idea why such blue shapes occur?
Thanks All

Most likely one of the reasons your not getting any answers is that you need to post a link to the page.  Sifting through all that code without the ability to see the actual page makes the going slow.
Post a link to the page and I'm sure help will be on the way.
Gary

Similar Messages

  • How can i fix this problem?? "The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )"

    The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )
    how can i fix this problem?

    how can i fix this problem?
    Go to the right forum.
    This forum is for mobile iMovie.
    you may need the iMovie Mac forum:
    https://discussions.apple.com/community/ilife/imovie

  • If I buy Microsoft office for MacBook pro will I be able to use diacritical marks for Welsh input? Welsh requires a circumflex sometimes on a,e,i,o,w and y, in addition to a diaeresis. An acute accents are not a problem as they occur in other languages.

    If I buy Microsoft office for MacBook pro will I be able to use diacritical marks for Welsh input? Welsh requires a circumflex sometimes on a,e,i,o,w and y, in addition to a diaeresis. An acute accents are not a problem as they occur in other languages.

    You can add in System Preferences, Language & Text, Input Sources, Welsh keyboard

  • Illustrator CS5 random thin lines in shape of a circle with an off-centred middle

    Hi there!
    I need to create random thin lines in shape of a circle (similar to a dandelion), but with an off-centred middle.
    I hope this makes sense...
    Here is a quick scribble of what I need:
    I just can't figure it out, does anybody have any ideas?
    Cheers,
    Maria

    wouldn't be a bad idea to use the flare tool:
    you can only have 50 lines though. needs some expanding/ungrouping, and delete the extra circles.

  • Invisible windows appears when trying to open a new window. These windows are listed in the Window list, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.

    I cannot open a new window for FireFox.
    Invisible windows appears when trying to open a new window. These windows are listed in the Window list on the menu, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.
    The Downloads Window cannot be accessed either.
    This is very annoying. Is this a bug? Or is there a fix.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Can I fix the alignment problems my Color LaserJet CP1518ni is having? The red does not line up.

    Can I fix the alignment problems my Color LaserJet CP1518ni is having?  The red does not line up.  I have installed the latest updates, etc.  Calibrating does not help.  The printer is only a few years old.  What gives?
    This question was solved.
    View Solution.

    Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support.
    I have a similar issue with a Laserjet cp1525nw, it was mostly corrected by removing and reseating the toner cartridges.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hello I recently downloaded an app on my iphone 4s - Remote mouse- so i can control my laptop that is connected to my tv, it used to work fine and now the connection fails, I downloaded another app and the same problem occurs, its not the firewall

    Hello I recently downloaded an app on my iphone 4s - Remote mouse- so i can control my laptop that is connected to my tv, it used to work fine and now the connection fails, I downloaded another app and the same problem occurs, its not the firewall and both phone and laptop are conected to the same wifi, i also tried to connect it manually with the ip address and still no connection, can you help??

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Then reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss) Try it again.

  • Hello guys.i have  an iphone5 16gb which shuts  out of  the  blue  randomly.not too often.any ideas ?os 7.0.3

    hello guys.i have  an iphone5 16gb which shuts  out of  the  blue  randomly.not too often.any ideas ?

    Follow the directions here, to restore the iOS software. If the issue continues after doing so, make an appointment at any Apple store:
    http://support.apple.com/kb/ht1414

  • HT201407 i Perform this , but stil problem occur, could not activate, what can i do. it say server is temporary unavialable. Actually i update my iphone 3gs from 4.1 to 6.1.3 ...   What can i do, reply iam waiting for answer.

    i Perform this , but stil problem occur, could not activate, what can i do. it say server is temporary unavialable. Actually i update my iphone 3gs from 4.1 to 6.1.3 ...   What can i do, reply iam waiting for answer.

    Is your phone jailbroken by any chance?

  • My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

    My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

    AmishCake wrote:
    Have you tried restoring your softwareyes
    yes I have

  • My iphone4 is stuck on a blue screen and will not shut off for restart, I have never dropped or had a problem  before....help

    My iphone4 is stuck on a blue screen and will not shut off or restart, I have never dropped or had a problem  before....help?

    Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

  • HT3805 Sudden problem: Adjustment panel blank (metadata and library OK). Thumbnail shown as file loads but then  image has dark blue cast and is not adjustable.  Have current version of Aperture running.  Help please

    Aperture Help needed: Adjustment panel is blank, although metadata and library panels normal.  Thumbnails appear normal but when RAW (CR2) file is loaded, it appears with a dark blue cast, and does not load into the adjustment panel, and is not adjustable. Suggestions please

    You may need to register your camera with the the launch service database again, see this post by Alan Roseman: Re: Aperture 3 preview of raw file greenish
    There is a "typo" in the command given in the link above, so read also the following posts on how to correctly enter the command and how the fix is supposed to work
    Good luck.
    Post back, if this does not help.
    Regards
    Léonie

  • HTTP 404 error occurs randomly when navigating to HTMLDB pages

    Oracle support have asked me to raise this issue here (ref TAR 4248522.999).
    Environment:
    Windows 2003 server
    Oracle DB version 10.1.0.2.0
    Oracle HTMLDB v 1.6.0.00.87
    Problem:
    When navigating to an HTMLDB page using a list item, an HTTP 404 error occurs randomly. There is no error in the database alert log BUT the following error is reported in the Apache log file which is recorded whenever the HTTP 404 error occurs:
    [Thu Jan 20 09:58:48 2005] [error] [client 10.25.22.163] [ecid: 1106215128:10.25.22.53:3576:3352:23759,0] mod_plsql: /pls/htmldb/f HTTP-404 ORA-00001: unique constraint (FLOWS_010600.WWV_FLOW_DATA_IDX1) violated
    ORA-06512: at "FLOWS_010600.WWV_FLOW_DISP_PAGE_PLUGS", line 180
    ORA-06512: at "FLOWS_010600.WWV_FLOW_DISP_PAGE_PLUGS", line 1298
    ORA-06512: at "FLOWS_010600.WWV_FLOW_DISP_PAGE_PLUGS", line 345
    ORA-06512: at "FLOWS_010600.WWV_FLOW", line 8779
    ORA-06512: at "FLOWS_010600.F", line 218
    ORA-06512: at line 10
    A list item is being used for navigation. It has been setup with a target type of 'Page in this Application' and a Page number of a page in the application. The checkbox 'reset pagination for this page' has been
    checked. The problem occurs when launching the application directly in a new browser or
    when running the application using the Application Builder's run application.
    The error occurs intermittently.

    I'm from support , The customer has open an SR
    TAR:4248522.999 to this issue.
    He updated the SR with following.
    I have not been able to re-produce this problem with the sample application.

  • P67A-C45 (B3) randomly not booting

    Hi, the problem is:
    When booting (both cold start and restart) my mobo randomly decides to boot properly or not to boot. I do not change any settings/hardware and it still occurs randomly.
    There are 4 scenarios that happen when I try to boot or reboot:
    1. Correct boot
    2. B4 at the right bottom of the screen, boots successfully after several seconds.
    3. 98 at the right bottom of the screen, lasts forever.
    4. Nothing on the screen
    Sometimes it takes 3 or 4 reboots to get to OS successfully.
    What I tried: restoring default settings, updating BIOS, removing all USB devices.
    The system is perfectly stable (stress tested) when it manages to boot so I doubt it's PSU fault.
    My hardware:
    P67A-C45 (B3)
    i5-2500K
    ASUS 6950 1GB DirectCu
    2x4 GB Corsair XMS3 1600MHz
    OCZ StealthXStream 600W.
    Help me guys, because I feel like playing a roulette when trying to turn my computer on.

    If not done so yet, disable EuP 2013. Try NovJoe's suggestion of using the one RAM stick in the primary blue dimm slot for testing. It may be good to test the 'each' stick individually in the primary slot. The latest beta BIOS can be found in Jack's thread, Reply #22; https://forum-en.msi.com/index.php?topic=145403.0
    Quote
    The system is perfectly stable (stress tested) when it manages to boot so I doubt it's PSU fault.
    The PSU is an inexpensive quad rail +12V, which can be part of the problem. A Corsair, like a TX650, single rail +12V (or other quality single rail) would be a much better choice to power the system. Please provide a screenshot of the CPUID's CPU-Z Memory & SPD tab. A hosting service like Photobucket is a good one.
    In regards to Reply #2, the first step is to get the system running stable in a stock/auto/default manner before venturing off into OC'ing & enabling OC Genie, etc.
    Quote
    cranked my 1.5 Snipers to 1.7 (again way to high, especially for stock 1866 sticks)....
    1866 is far from stock, 'rated' maybe, but not stock for the OP's platform. Doubtful they have true 1866 chips on them. RAM should be run at the Intel specifications for the Sandy Bridge CPU IMC of DDR3 1333, anything over that is out of specifications & is overclocking. There is a special section of the forum for those wanting to operate components outside of the stock/auto/default specifications.  
     

  • My OSX10.6.8 only connects to the internet for 5 second intervals??  Modem works fine (husband is not having problem on other computer), restarting doesn't work.  Can browse web just fine for 5 seconds until it disconnects.  Help??

    I am running Mac OSX 10.6.8, but this problem has occurred also while I was running OSX 10.5.  This problem happens about once every two or three months, but seems to occur randomly.  When I try to connect to a wifi network on this computer, it will only connect for approx. 5 seconds before disconnecting, either telling me the password is wrong (which it is not) or a "connection timeout" message.  During this 5 second window, I can access the internet just fine until it disconnects me.  I don't understand why it is doing this.  My router/modem is working fine, my husband is using our other computer without problem.  In the past, restarting my computer a few times seems to do the trick.  But at the time of my typing this, it has not made any difference.  I am currently connected via an ethernet cable, but I would like to go back to being wireless.  Any advice for me?

    Welcome to Apple Discussions!
    I probably can't help much, but I have occasionally had the same problem. You might try going to System Preferences>Network and look at your Airport connection. See if the diagnostics can help.
    Good luck!

Maybe you are looking for