Blue Snowflake Mic won't recognize on Snow Leopard

I just purchased a Brand New Blue USB Snowflake Mic, and when I plug it into my 2006 Mac Pro running OS X 10.6.5, it won't show up in the Sound System Preferences. I do not know what to do. It says it works with OS X, but I can't get my Mac to see it. Any ideas or help?

I can tell you my wife and I have had this happen on both of our BLUE snowflake mics. After some phone calls to BLUE, they replaced them both under warranty.
Both of the replacement Snowflakes work on our macs, but they were obviously refurbs.
It's worth noting that my wife has another BLUE mic, a Snowball that she uses for voicework. It has never exhibited any issues. Only the snowflakes. I get the impression, though it's purely anecdotal, that there is a high failure/return rate on the snowflake mics.
love,
shmoo

Similar Messages

Blue Snowflake Mic won't recognize on 2006 Mac Pro.

I just purchased a Brand New Blue USB Snowflake Mic, and when I plug it into my 2006 Mac Pro running OS X 10.6.5, it won't show up in the Sound System Preferences. I do not know what to do. It says it works with OS X, but I can't get my Mac to see it. Any ideas or help?

I can tell you my wife and I have had this happen on both of our BLUE snowflake mics. After some phone calls to BLUE, they replaced them both under warranty.
Both of the replacement Snowflakes work on our macs, but they were obviously refurbs.
It's worth noting that my wife has another BLUE mic, a Snowball that she uses for voicework. It has never exhibited any issues. Only the snowflakes. I get the impression, though it's purely anecdotal, that there is a high failure/return rate on the snowflake mics.
love,
shmoo

Migration Assistant won't recognize computers-Snow Leopard to Lion

Hello everyone-
I just bought a new Quad Core MacBook Pro that came with Lion installed. I am trying to use Migration Assistant to transfer data from my older Core 2 Duo MacBook Pro that has Snow Leopard installed. When I run Migration Assistant with the computers connected, it doesn't recognize either computer... It just sits there indefinitely acting as if it is searching but never sees either of the machines. I have tried with both computers connected via Firewire (using several different cables just to be sure the cables were good) and also with an Ethernet cable. I experience the same problem, regardless. Also, I have downloaded the Migration Assistant update for Snow Leopard, and it hasn't helped. Am I missing something obvious? Thanks in advance-

make sure that both computers are up to date
http://support.apple.com/kb/DL1420
and for your lion, it should be at least 10.7.1

Blue Snowflake Mic WONT WORK!!!

I have a MAC OS X 10.5.4 and I just got it last week. I bought Logic Express to do some recording. I know the computer comes with a built in mic but I wanted a semi good mic. So Logic Express 8 doesn't read the Blue Snowflake mics. I have read one blog about fixing this problem its just that the person that posted it was not very thorough. Can someone help me with a step by step solution so I can use this microphone to record and be able to change back to the built-in microphone when I am on Skype. My built-in microphone works as a charm. Just the microphone I paid money for doesn't and no one seems to have a concise was of explaining how to fix it. Thank you!

Make sure you plug the microphone into the mic jack on your sound card.
Depending on what audio card you have, you will need to set the recording source to microphone in the audio settings. (Start, Programs, Accessories, Entertainment, Volume Control, Options, Properties, Select Recording Source.) You might also selecting Mic Boost if there is an option.
Once the Mic is selected as the recording source, change back to playback (Volume Control, Options, Properties, Playback Control) and for now, make sure the microphone setting is not muted. Once that is done, try talking into the microphone to see if you can hear yourself over your speakers. If you can, then it's all set. If not, contact the company who makes your Sound card and verify the settings for enabling your microphone and specifically, what types of microphone and what range will work best (ex 600 ohmz)

Garageband 4.1.2 won't work in Snow Leopard. Why? Please help.

Garageband 4.1.2 won't work in Snow Leopard. Why? Please help.

It might be a PPC application. You may need the optional Rosetta install.

Epson C88 Won't Print with Snow Leopard

C88 won't print using Snow Leopard. Downloaded driver from Epson doesn't help.????

Like you, I'm working with an Epson C-88+. Happy with this situation, would not be exactly accurate. I have tried some different approaches, including the ones from John and Kappy. They would work just fine for about 3 days, then fail. I even went back to the Snow Leopard Install DVD/ Optional Installs/ Options.MPKG/ Printer Support and made a choice. I then went to Disk First Aid and everything was fine. Today, I went to print 1 envelope, total dismal failure. I then downloaded the EPSON Printer Drivers 2.1, I proceeded to install the drivers. Did anybody notice, this was an Apple License, not an EPSON License? Therefore, there are no assurances, that these print drivers are in fact, EPSON. Therefore, AppleCare should be required to support these Print Drivers as Apple Licensed Products. But equally so, we as 'dumb endusers' must try to work with AppleCare to solve this issue. To "pete.purvis" John and Kappy, sorry, you guys have proven yourselves to be out of the "dumb endusers group, I just want to say, THANK YOU!

HP Laserjet 4mp won't print with Snow Leopard

My great Laserjet 4mp prints just fine with OS 10.5.8 but not with Snow Leopard (10.6.2) on my new iMac. Have spent three plus hours with senior level Mac Techs to no avail. The printer screen shows the correct printer and driver and indicating valid connection, but when attempting to print I get the message "Unable to print, try again in 30 secs". Since 10.6 doesn't have Appletalk, am unable to use it; techs have tried to use the 4mp driver supplied with Snow Leopard and also downloaded it separately from the web site. We (they) have also tried using all methods (IP, Daemon, and HP Jet Direct using Ethernet and Serial to USB connections). Techs have talked with HP techs and have no other solutions. The security system is off. Any suggestions are welcome! Thanks!

I've read the threads and don't understand some, but I think we (the Apple support techs and I) have tried the ones I recognize. One new idea--in a reply to a similar post someone mentioned being sure to use additional data when using the IP address-- submask address or some such, I
haven't been told to do this--should I? (I can get it from the printer readout if told what to get.) Also, in another post someone suggested deleting the OS 10.5.8 driver that was transferred when all the data from my old iMac G5 was moved over, saying that it would interfere. If true, how do I do that?
What I really need is a stepwise instruction on which connection to use (Ethernet, Serial to USB, or parallel port are the only options); which protocol to use (IPP, Line Printer Daemon, or HP Jet Direct socket, whatever they are); what to put in the Address line (the IP address is the one used by Apple techs); what to put in the Queue line (techs said to leave it blank); what to put in Name and Location blocks, if anything; and what to put in the Print Using line (techs have unsuccessfully tried Autoselect, Generic, and the HP4mp driver selected both from the Select Printer Driver option and from the driver downloaded directly from the HP web site).
I'd be grateful for this help or even advice on where I can get it! (With this new computer I still have free telelphonic Apple tech support but they've given up.) Thanks!

HP Officejet Pro 8500 Wireless Won't Scan Under Snow Leopard

After installing Snow Leopard, my new HP Officejet Pro Wireless 8500 all-in-one printer won't scan. It delivers the following error message: "No Scan Options - refer to device documentation".
Also, when I attempted to check and adjust scan settings using HP's Scan Destinations program, that program hangs and cannot save any setting changes. Then I have to use "Force Quit" to stop the program from hanging up while saving.
HP's software update reports the printer software is up to date.
It appears there are a ton of printer problems appearing for people after installing Snow Leopard, but I sure would appreciate any help on solutions if someone also has this problem.
Thanks much.

I also just tried connecting my 8500 wireless printer directly via usb and then downloading the HP printer drivers from Apple downloads and reinstalling.
The install hangs nearly forever on the final step, but eventually says the driver install was successful. However, then when connected via usb, I am unable to print. Printing works when you reconnect via the wireless on the 8500.
So connecting via usb and reinstalling HP printer drivers does not solve the issue. And it's puzzling, because the list of supported printers under Snow Leopard lists the Officejet Pro8500 Wireless as supporting both printing and scanning.
Somebody has it wrong.
If this scanning problem continues very long, I may be forced to uninstall Snow Leopard, because my printer is brand new.

HP Printer Won't Work With Snow Leopard

Hi, I hope you can help. I have just upgraded to Snow Leopard and my HP printer won't print. It is a Laserjet 1015 and new drivers are meant to be on the list with SN. My iMac recognises the printer is there but cannot make a connection. I am networking it using an Airport which is working fine. I have even reset the printer system and deleted the printer and added it again but after starting to process a document to print it just stops.
The other thing is that Pages v 1.0.2 also won't work now. I can open the software, but it can't open any existing documents nor will it open a new blank template. This is my work software (I'm a journalist) so this is a real worry. Any suggestions??
Thanks so much
Jo

Hi JoJoh,
I can't be of much help with the printer but I just checked my "Pages" and my version number is 4.0.2. I'm using iWork 09. Perhaps you need to update? I just checked the "Snow Leopard Compatible" site and found "Apple Pages 4.0.2" is compatible. It didn't mention 1.0.2. I'm so sorry. That's pretty rough when it's how you make your living.
As for the printer, I have an HP Photosmart C4580 which wouldn't print. I finally just deleted all the printers on my MacBook and used my Snow Leopard install disk and selected the "Optional Install" which allowed me to just reinstall the printers. My HP is now working fine. I do feel like this is just a work-around until HP gets things sorted out. I say that because even though my HP now works, the only place it shows up is in my users folder. It's not in my Applications folder, but as long as it works for now, I don't care.
Hope I was of some help to you. Best of luck!

Safari and Mail won't open in Snow Leopard

Any else having this VERY frustrating problem of Safari and Mail not opening. I've installed Snow Leopard and downloaded and installed the 10.6.1 update. Then when I try to open Safari, it says, "You can't use this version of the application Safari with this version of Mac OS X. You have Safari 4.0.3." When I try to open Mail, it says the same thing. I downloaded Safari again, and it won't even install it saying, "Safari can't be installed on this disk. This update requires Mac OS X 10.5.8 or newer." But I have 10.6.1.
Help. Anyone? Please?
Thanks

HI,
Try launching Safari and Mail from the Applications folder. If it works, drag the Safari and Mail icons off the Dock. Just drag straight up. They'll go poof.
With Safari or Mail open, select the icon in the Dock/Keep in Dock.
If that doesn't help, locate these files.
com.apple.Mail.plist
com.appple.Safari/plist
Drag those files to the Trash, empty the Trash and restart your Mac.
Carolyn

MacBook Pro Won't Sleep after Snow Leopard Install

Neither closing the computer, or selecting Sleep from the menu will allow my computer to enter slumber. Shorty after closing its eyes, my computer will make that unsettling grinding noise and wake up.
I've reset the PRAM, the PMU, turned off bluetooth, airport, all running applications. This only started happening after installing 10.6.
I found a thread on MacRumors discussing this problem, but there was no fix yet. So I bring it here. Can anybody guess what's up, or should I just take it in to the Apple store?

Don't bother taking it to the Apple Store. They won't be able to help. This is a bug in Snow Leopard. I don't know of any workaround or any way to make it stop. It doesn't happen all the time. Usually shutting down the machine will fix it. Sometimes, it will fix itself after a while.
It is important that you never assume a machine is going to go to sleep successfully. Always wait for the pulsating light. If it does go to sleep, chances are it will stay that way. I used iLid Preference Pane to make sure that my machine doesn't accidentally wake up while it is in a bag or something.
I've already filed a couple of bug reports about it. You can help you sending your feedback to Apple.

IPhoto won't open since Snow Leopard upgrade

Hi,
Since upgrading to snow leopard iPhoto won't open, it just crashes instantly. I ahve tried reinstalling with no luck.
Can anybody help with this?
Thanks in advance,
Dan.

i just bought a new MBP 13'' 2.53 Ghz 4Gb Ram 250GB HD... i tried moving my iPhoto library from my powerbook g4 1.67 machine that was running 10.4.11 (via a Lacie external)
once i moved this and opened iPhoto (on my new MBp running 10.6.1 - SNOW LEOPARD) it instantly asks me to upgrade the library (saying that the old library needs upgrading for this version), so i click upgrade, and then 2 seconds later it says that the library is corrupt and damaged and i must install from a back up...
I deleted iPhoto then emptied trash after clearing up some space on the external, meaning i lost iPhoto applicaton - IDIOT I KNOW - so i download iPhoto 8.1 and the library upgrade and error / damaged library message appeared again...
I have now, (as i type this right now) re-installed snow leopard from the snow leopard disk that came in the MBP box (i have had it like 2 weeks, thats it, it shipped with leopard and i am having to install SNOW LEOPARD, for the 2nd time) to get iPhoto back)... will this give me iPhoto back, or do i have to re-install from the LEOPARD OS disks that were sent in the MBP box, the OS that it shipped with?
i am very annoyed that it seems that my iPhoto library from a 3.75year old machine cant be on my new machine unless i re-add each PBG4Tiger10.4.11 individual library folder thru the interface of iPhoto on my new machine... (if indeed it will ever open)...
PLEASE HELP !

IPhoto videos won't play with Snow Leopard

Snow Leopard is hostile to my fonts, my trackpad, and now my iPhoto videos. When I double-click on the videos, they no longer open in QuickTime or do anything, they won't play. Any suggestions? (Uninstall Snow Leopard?)
Thanks in advance.

I deleted that post 5 times b/c it was a mistake, I do not have iPhoto 5, I have iPhoto 08. If iPhoto 08 is glitchey with Snow Lion, what am I supposed to do, buy iLife? It's not inexpensive.

Mavericks won't log onto Snow Leopard server share points

I have 3 imacs, running mavericks which won't successfully log onto Snow Leopard server share points.
The server appears on the list on the left and i get to a login screen when i select the server.
I enter the username and password and the box just shakes.
However if I tick the "access as administrator" in the user prefs on the server, it can connect, however i don't want certain users to have admin rights.
The strange thing is, is that if i choose to login with a user name and password for one of the older macs (10.6), i can log in. But that defeats the object.
This is obviously an authentication issue between mavericks and SL.
Any one else had this?
Thanks in advance.

Try using sort format of user name

Magic mouse won't scroll on snow leopard

I bought an imac two weeks ago (snow leopard)- and my magic mouse won't scroll! I do not seem to have the USB overdrive installed, I have all the latest software! Help!

The ball is dirty, they have a history of accumulating dirt and grime on them so that's my best guess. When I used one what worked well was rolling the ball very very vigorously on a white sheet of paper on a hard flat surface. Do this for about 60 seconds then see if that took care of it.
NOTE: My error I misread and thought you wrote Mighty Mouse. Please disregard.

Blue Snowflake Mic won't recognize on Snow Leopard

Similar Messages

Maybe you are looking for