Blue squares over moving images and videos, Blue squares over moving images and videos

https://www.youtube.com/watch?v=t9NmqnaHuWo&feature=youtu.be
This issue is going on for a while and I have tried the usual means to fix it, like restarting, updating drivers, uninstalling gfxCardStatus completely...
As you can see on the video, anytime I have an image in motion - be it a video or even when scrolling down a website - a blue rectangle appears over the image or video. When I pause it returns to normal.
This is absolutelly unacceptable. I work with video editing and this has neutralized my ability to color grade anything, unless of course if I want to really hate myself on the process.
I'd be trully grateful if anyone could help me out.
My system is a Macbook Pro Retina 15" - Mid 2012
Graphics Card is a GTX 650M (discrete)
Thanks in advance.

I have the same issue.i need help to rid off this..i have ipad2

Similar Messages

Faint blue speckles and lines appear all over printed documents, Laser Jet CP3525dn

Dear Toner Problem Community,
Every time I print, faint blue speckles appear all over my document. When I print in mass, blue lines also begin to appear at around page 34, and double blue lines begin to appear around page 62. I performed "Process Cleaning" three times with no difference. Someone suggested vacuuming out excess toner, but I pulled out the cartridge and don't see any excess toner. Please help. Thank you!

PrepressPro1 wrote:
<snipped>... so if your looking for this forum to play detective and tell you who in your workflow set the elements to overprint, I don't think this can be done. I don't think I have ever seen Illustrator set any elements to overprint all by its self. <snipped>
Hi PrepressPro...
Many thanks for your earlier inputs, but not quite sure where you got the idea that i want someone or anyone to play detective... i've understood the Overprint problem... and moved on. If anything, maybe i was just musing and wondering if any particular action turns on "Overprint Fill"...
Or maybe, i was referring to the second question which has not been resolved yet... Quoting it below for easy reference:
++++
The other issue...
Same black background(s)... placed Photoshop file/s with a transparent background... Prints fine at the printers (various machines and media) ... But on the laserprinter an HP Color Laser Jet CP1510 series, there's a dark patch around the image (the actual file area).
++++
To elaborate, the pix above are product shots which have been cut out and placed on a transparent background... The PS file is then placed in AI CS4 with the object option selected to maintain transparency. The transparent area is printing darker on the printer above. But is fine when sent to commerciqal printers...
Attached is a scan of the problem...

Skype video crashes my GPU driver and causes blue screen.

Hello,
Installed a new copy of windows and got the latest version of skype for my PC (on wich skype worked just fine, video calls, voice calls, but it was an older version. No hardware changes)
With the new skype, I , for the least, get driver crashes, and for the most, a blue screen, when I just go to options to set up my webcam.As soon as I see the square "loading" my webcam in the options, everything freezes and I get a driver crash or a blue screen.
Current specs:
i5 4440, stock clocks
2x8gb 1333 ddr3 1.5v ram, stock
R7 260x, stock
500w PSU, not the best quality, But I also tried a 1000w platinum PSU, and same resaults.
last error code I remeber from the blue screen was: 0x00000116
I know it is related to the GPU, but it doesn't have power deficiency, since I manage to run heavy games just fine.By the way, my webcam works just fine on different web sites, so it's not the webcam.
What I tried:
-Degrading to the oldest supported version by skype
-Degrading video drivers
-Using different webcams
-Installed all windows 7 64 bit updates
edit:
skype 6.14 works, but newer versions crash my GPU drivers and cause blue screen

I would suggest uninstalling Droidcam as it could be the source of some delays assisting in causing the problem. TDR problems occur when your videocard is unable to respond in 2 seconds for a variety of reasons (heat, tweaks), forcefully resetting the card. Some people increase this delay in their registry from 2 to up to 10 seconds to give the card time to catch up so that a reset doesn't occur. You can try this MS fix it which increases this delay. https://support.microsoft.com/en-us/kb/2665946

HT4623 I upgraded to the iOS 7 and now I have a moving blue box jumping around my screen that I can't get rid of. How do I make it go away?

I upgraded to iOS 7 and now I have a moving blue box jumping all over my screen. How do I make it go away?

Settings>General>Accessibility>Switches>Switch Source
Turn it off!

Embedded images replaced with blue square/question mark

Guys,
Am new to Macs so it's probably user error however, I regularly receive mails with embedding images in them. On my PC I had they came in fine however on my new Mac all the images get stripped out of the e-mail and saved as attachments. This means all the image place holders in the mail show as small blue squares with a white question mark in them and doing quick look on the attachments shows the correct images!
Is there a config setting that stops mail stripping the images off as attachments when they're "in" an e-mail??
Hope someone can help as this is bugging me now!!
Thanks,
Mark

Don't know if this suggestion will help but..........
I experienced problems with attaching images to outgoing mail. When I did this with my new iMac (OSX 10.4.11) the attached files were replaced with a blue square containing a question mark.
I browsed various forums and found quite a few references to the same problem and I tried all the various 'fixes' to no avail.
Earlier today I called Apple's tech support and spoke with Mujahid. He went through the problem, established that it was 'system wide' on my iMac and then he suggested that I trash Mail (v2.1.2) and re-install Mail (only Mail) from the disks that came with my Mac. I followed his instructions and after a shut down/restart cycle, Mail now functions correctly. When I attach an image file to an outgoing email, the file no longer appears as a blue square with ? mark but as the original image.
I wonder if the same sort of fix might resolve the problems with Safari?
Thanks to Mujahid.
Regards.
Niall

Any idea why Encore keeps telling me to insert Blu-ray media, and click OK. - over and over?

Hi Everyone,
I'm really new to Adobe Premiere and Encore. I finally learned about Cineform Neoscene and was able to turn my Canon 5 D MK II files into something usable. I've just made my first documentary (Fiji Floods - 2009) - somewhat amateurish but not bad for a first effort.
So here's my problem. I successfully made a Blu-ray disk which had chapters and then cut a second version in which I deleted a few scenes - this was minus the chapter links - but burned okay. I then tried to burn a third Blu-ray of version 2 with the Menu and Chapter links. No go. I keep getting the message "Please insert Blu-ray media, close the tray, and click OK." - over and over.
So I thought I'd side-step Encore by burning an image file and using my Cyberlink software to copy that onto Blu-ray. Cyberlink detected something on my supposedly clean disks (which I had tried to write to using Encore) but copied the image anyway. It copied "okay" but gave me the message "failed to close". I can play this version on my computer using Cyberlink but not on my Samsunbg Blu-ray connected to my widescreen TV.
Does anyone have any ideas as to what might be going on? Should I go buy fresh Blu-ray and hope for better success?
Cheers,
Paddy Ryan

>Encore 4.0.1.048
Have you updated Roxio?
As well as the below, right click the Encore icon and select Run as Administrator... which is NOT the same thing as running the computer with the Administrator account... and which fixes several "odd" problems
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS

When i take photos or videos on my ipod touch with the camera, then i plug it into the computer to sync, the computer shuts down and this blue screen comes up saying "an error has occured" and a heap of other stuff.

When i take a photo or a video using the camera on my ipod touch, the computer (windows xp) shuts down and a blue screen comes up saying "an error has occured" and a heap of oth stuff in white. It doesn't wipe the memory or anything off the ipod. Whenever i sync my ipod without photos or videos it works fine. It also doesn't mind me taking photos off itunes to put on the ipod. I have had a look around and a couple of people say reinstall itunes, but i don't know if i will lose all my songs and apps. Any suggestions of help?

Removing all Apple related software and reinstalling iTunes should bring all needed drivers back: Removing iTunes, QuickTime, and other software components for Windows XP
Also check for new driver updates for Windows, especially if you have a webcam installed.
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
copied from the article about reinstalling iTunes

Images showing red blue spot and they are not crisp at all - Canon EOS 600 D

Hello,
About a month ago i bougth Canon EOS 600 D with 18-55 mm and 55-250mm lens and everything goes fine i capture moon images and wildlife pictures as well.
But, now i'm facing some problem with it.
Recently i was trying to capture images with my Canon EOS 600 D and suddenly i noticed that the images are not sharp at all and the images show red and blue spot. I don't know what to do i'm just an ammature in this.
Please any one can help me with this problem.
Canon EOS 600D & EOS 5d Mark iii
Best DSLR's to make Images Real !
Apple News
Solved!
Go to Solution.

If you're taking shots of just the moon then the exposure value won't change all that much day to day. I recommend shooting in full manual, use the same settings that you used that gave you images you liked as a baseline. Low iso, nice middle aperture, and adjust shutter speed to fine tune the exposure. The next day you start at the same settings and adjust the shutter speed slightly if needed to account for a change in brightness. Good luck, have fun.

My ipad mini 2 gets blue screen and then keep restarting over and over again problem

My ipad mini 2 gets blue screen and then keep restarting over and over again problem. I tried to restore to the factory setting but it was not successful to fix the problem. Sometimes I could not even restore. How can I do with this kind of problem?
I'm very frustrated now. Please help me!

I have the same issue and have not found a way to fix it yet. I cant even down grade back to 8.2 because it wont stay on long enough.

Safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

Hi Apple,
iphone 5s latest updates , safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

Hi,
If you are absolutely sure that neither the sound output of the Macbook nor the sound output of VoiceOver are muted then try to reset VoiceOver.
1. Open VoiceOver Preferences.
2. From the File menu choose "Reset All VoiceOver Preferences …".
3. Click "Reset.
4. Turn VoiceOver Off and On again. (hold command and press F5 twice).
If you still don't hear anything then it could be that the main sound output of the Macbook got muted somehow. I find that I often hit the mute button on my Apple wireless keyboard without noticing. So just make sure that its not muted and also hit the "Volume Up" a few times. Its so terribly obvious I know but its also very easy to miss. Lots of people do that.

My ipad is having something wrong in the screen pixels the screen is having an error it is giving a red and baby blue lights all over the screen (invert colours is turned off)

My ipad is having something wrong in the screen pixels the screen is having an error it is giving a red and baby blue lights all over the screen (invert colours is turned off)

Try Recovery Mode.
Read this: http://support.apple.com/kb/ht1808
Follow the instructions very carefully.

MacBook Pro Repeatedly Loads Purple & Teal Stripe, Gray, Light Blue, Bright Blue and Bright Blue Stripe Screens Instead of OS after Optical Drive Replacement by Apple (PICTURES INCLUDED)

17 inch March 26-29 (order date – shipping date) 2011 MacBook Pro, 256GB Solid State Drive, 2.3 GHz Quad-core Intel Core i7, 1 processer, 4 Cores, 256 KB L2 Cache per core, 8 MB L3 Cache, 8 GB Memory (8GB 1333MHZ DDR3 SDRAM - 2X4GB), AMD Radeon HD 6750M Video Card, Intel HD Graphics 3000 with 512 MB total of VRAM. 110 GBs of free/unused disk space remaining.
Full Specs are in subsequent post.
The issues described in the title continue even after I’ve reinstalled the operating system twice (Snow Leopard) and installed Mavericks (which is working fine and even faster). I’ve tried many commands to repair this.
If anyone has experienced any of the symptoms above or below, your advice and response will be much appreciated as well as marked. These are the details:
My Early 2011 MacBook Pro has had the typical blue screens, screen freezes and graphics issues since I bought it about three years ago but nothing like this and NEVER any load issues until about a month ago. That was when my superdrive replacement was put in.
Since then my MacBook Pro will go into hard freezes or kernel panics. Then I’ll have to power it down manually and power it up manually. It’ll then refuse to load the OS until after multiple tries. It started out just 2 or 3, then 4 or 5, then 6-12, then 20. Now it takes over 30 boots to load the OS. These boot issues also occur even if it doesn’t freeze, i.e.: when I shut it down or restart it naturally (via the Apple menu, etc.).
95% of the time it’ll load to a gray screen instead of the OS. 4% of the time it’ll load to a light blue screen. Then there are the others: the first time this happened it loaded to the striped purple and teal screen shown in the picture. This happened the next four times then intermittently for about 5 or so more times.
It also loaded gray flickering screens. Flickering screens also occurred right before it froze and had to be manually powered down and up. Then it began to load regular gray and light blue screens and all flickering screens stopped. And then bright blue screens a couple times intermittently for a few days, sometimes with lines. Sometimes it’ll load to a blank/black screen as well. I’d reset the NVRAM and SMC but it still continued, happening multiple times a day, each time taking more and more hard shut downs and hard power ons to finally load the OS.
Until I installed Mavericks, every time it finally loaded the OS Finder began indexing. After Mavericks this has occurred 95% of the time.
After talking to Apple Support they had me do a NVRAM and SMC reset again over the phone. The MacBook Pro refused to load the entire time we were on the phone. After the call it got worse. It froze over 6 times that day and at worse took over 30 boots to load the OS.
I finally had time to deal with it the next day when it froze again. After over 25 boots it loaded and I put in the Snow Leopard OS dvd and ran Disk Utility. I verified the hard drive and it said it was fine. Repaired the disk anyway and it gave this message at the end:
“Updating boot support partitions for volume required”.
Next I tried to start in safe mode and it just hung up for hours. Then started up in single mode and it loaded the OS. It then loaded normally for three times in a row. I reinstalled Snow Leopard. Everything loaded normally. I waited an hour or so and then I downloaded Mavericks. 5 or so hours later Mavericks was installed. Everything hardware wise was fine for a day and all software issues were easily fixable incompatibilities. My Mac was even faster with Mavericks. However, Photoshop did give a perhaps relevant message:
“Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer’s website for the latest software.
GPU enhancements can be enabled in the Performance panel of Preferences.”
(I have OpenGL enabled in Photoshop and it was already checked when this error occurred).
Two days ago I went to Disk Utility to repair permissions while logged in to a non-admin account. Verified and repaired the disk, then verified permissions. Everything fine. After repairing permissions however, it gave a weird error box:
"Unapproved caller, SecurityAgent may only be invoked by Apple software".
The box stayed “stuck” in the Disk Utility window. My MacBook Pro then failed to do anything. I manually powered it down and up. It loaded to a gray screen with the error message box again: "Unapproved caller, SecurityAgent may only be invoked by Apple software".
It then refused to load anything else but this message box on a gray screen even after rebooting it multiple times in safe, verbose and single modes and after resetting the NVRAM and SMC. I went online with an iPad and entered in the error and got some advice. I tried to run fsck and erase the /var/folders/ via single user mode but it still loaded to a gray screen with the error message. I just decided to skip to the end and Cmd-R loaded into recovery mode and reinstalled Mavericks again. That worked: the message has not appeared since.
Some people have said this error is related to a hard drive cable failure. I know that this cable was tampered with during the optical drive replacement procedures because I watched them do it.
Everything was fine for a day. Then yesterday my MacBook Pro froze while trying to open a VLC file. It took 12 boots to load the OS. I tried single mode once and verbose mode once. 10 times it loaded to gray screens, even in those mode. A Safe boot lead to a bright blue screen. Finally reset the SMC and it loaded on the 12th time.
Just five hours ago the same thing happened except it took over 30 boots to load the OS. Single, verbose and normal boots, NVRAM and SMC resets lead to gray screens. Safe boots lead to bright blue screens with and without lines (see pictures). Finally loaded on a normal boot.
I know I should have tried safe booting, verbose, single and recovery modes, disk utility, fsck and other command methods earlier this month but in the end, these methods have not solved the problem anymore than resetting the NVRAM or SMC.
There seems to be conclusive evidence that it’s a hardware problem, stemming from last month, the FIRST AND ONLY time my MacBook Pro was opened up. Maybe it’s the hard drive cable, but it could also be the graphics card and/or logic board (something that’s always been defective on this MacBook Pro, in my opinion). Many early 2011 MacBook Pro owners have given evidence to the latter possibility online.
The first time it started it seemed to stem from me using iPhoto and Photoshop a lot. I had both running continuously for about two weeks. This is another reason for suspecting the graphics card/logic board is at fault (in addition to three years of screen/graphics glitches). And since the card is soldered to the board and the board connected to the cable...I also have serious battery draining issues, something else that got bad after the Apple Superdrive repair. And the battery is connected to the board...
Also, since downloading Mavericks, windows from every app get blurry/fuzzy when I scroll or zoom in. I have read that this is happening to a lot of folks though for various reasons.
I guess it could always be the hard drive. I just don’t know. I’m taking it in to Apple, but can't right away because it’s not local. I know they’ll be able to run a test on the hard drive. I wanted to see if anyone else has had this problem (especially the purple and teal striped screen) before they start poking around, possibly creating another problem that goes beyond my Apple Care Plan allotment.

SPECS OF MY MACBOOK PRO:
Model Name: March 26-29 2011 MacBook Pro (order date – shipping date)
Model Identifier: MacBookPro8,3
Processor Name: Quad-core Intel Core i7
Processor Speed:    2.3 GHz
Number of Processors:    1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB Memory (8GB 1333MHZ DDR3 SDRAM - 2X4GB)
HARD DRIVE: 256GB Solid State Drive
DISPLAY: MBP 17" HR Antiglare WS Display
AMD Radeon HD 6750M:
Chipset Model: AMD Radeon HD 6750M
Type:    GPU
Bus: PCIe
PCIe Lane Width:    x8
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6741
Revision ID: 0x0000
ROM Revision: 113-C0170L-573
gMux Version: 1.9.24
EFI Driver Version: 01.00.573
Intel HD Graphics 3000:
Chipset Model: Intel HD Graphics 3000
Type:    GPU
Bus: Built-In
VRAM (Total): 512 MB
Vendor: Intel (0x8086)
Device ID: 0x0126
Revision ID: 0x0009
gMux Version: 1.9.24
Displays
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Battery Information:
Model Information:
Serial Number:    C01111403GLDGKMAE
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code:    0000
PCB Lot Code: 0000
Firmware Version: 0406
Hardware Revision: 0001
Cell Revision:    1102
Charge Information:
Charge Remaining (mAh): 4583
Fully Charged:    No
Charging: Yes
Full Charge Capacity (mAh): 7765
Health Information:
Cycle Count: 276
Condition: Normal
Battery Installed: Yes
Amperage (mA):    -4487
Voltage (mV): 11306
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes):    15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: No
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes):    15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes):    5
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: No
GPUSwitch: 2
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected: Yes
ID:    0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x0085
Serial Number:    0x007ad8c5
Charging: Yes
Current operating system: 10.9.3 (Mavericks) ; Installed on 6/21/14
Previous operating system: 10.6.8 (Snow Leopard); Installed 4/4/11
        Reinstalled multiple times. Last reinstall: 6/21/14

Is there a way to prevent an image from turning blue when selecting it?

I'm exported a pdf from InDesign that will be used as a brochure for one of the exhibitions at our museum. I'm wondering if there's any way to prevent an image from turning blue when a reader clicks on it. Since all of the images are works of art, I'd rather that they not change color when people click on them.
I changed the security settings so the images couldn't be copies, hoping that would prevent the blue square, but it didn't help.
thanks for any suggestions.
Chris

There are several ways to do that and here are but two of them.
1. If you want to make a new image you can right click on the channel, click on Duplicate Channel and under Destination>Document, select New
2. If you want to add a new layer to your document, click on the channel in the channels panel, go to Select>All, then Edit>Copy, click on RGB in the channels panel and then Edit>Paste

HP MediaSmart DVD software and major Blu-ray issues

In September 2010, I bought an HP Pavilion Elite HPE 250-f desktop computer (running Windows 7). This computer was advertised as having a Blu-ray DVD player, as well as players for regular DVDs and CDs. From September 2010 to October 2014, I successfully played regular DVDs and CDs. But in October 2014, for the first time, I needed to view a Blu-ray DVD. Specifically, I needed to view the "Divergent" Blu-ray.
When I tried to play the "Divergent" Blu-ray (which was made in 2014), the HP MediaSmart DVD software (version 3.1.1.3317) and the Windows Media Player detected the Blu-ray but were not able to play the Blu-ray.
Next, I downloaded the Media Player Codec Pack, http://download.cnet.com/Media-Player-Codec-Pack/3000-13632_4-10749065.html. This Codec Pack was supposed to help Windows Media Player play the Blu-ray. That did not work.
I then downloaded Cyberlink PowerDVD 14, which played the Blu-ray for only about 7 seconds before crashing.
I downloaded TotalMedia Theatre version 6.0.1.123. However, this software did not even detect the Blu-ray.
Recently, I decided to revisit this issue. I installed the most advanced version of HP MediaSmart DVD. I installed HP TouchSmart DVD, version 4.1.2.5122.
TouchSmart flawlessly played disk 1 of the 2-disk "Star Trek" Blu-ray set (made in 2009). However, TouchSmart was not able to play the "Divergent" Blu-ray at all. After failing to play the "Divergent" Blu-ray, TouchSmart attempted to play disk 2 of the "Star Trek" Blu-ray set. TouchSmart played disk 2 with poor video.
Next, for some strange reason, TouchSmart became totally inaccessible. I could not start TouchSmart. I rebooted the computer. TouchSmart was then able to play the "Divergent" regular DVD, but was unable to play the "Star Trek" Blu-rays at all.
I did a system restore to the point just after the installation of TouchSmart. TouchSmart played regular DVDs well, but still could not play the "Star Trek" Blu-rays at all.
Next, I got rid of TouchSmart and installed HP MediaSmart DVD, version 4.1.4229 (sp49489.exe). MediaSmart 4.1.4229 flawlessly played the "Speed" Blu-ray (made in 2006). However, MediaSmart 4.1.4229 failed to play either of the "Star Trek" Blu-rays. And after failing to play the "Star Trek" Blu-rays, MediaSmart 4.1.4229 played "Speed" with poor video.
So, it appears that any specific version of HP MediaSmart DVD software will play old Blu-rays successfully, and will then subsequently fail to play more advanced, more recent Blu-rays. After that version fails to play the more advanced Blu-rays, that version will play the old Blu-rays, not as flawlessly as before, but rather with poor video quality or not at all.
I have read many threads on the HP forums and on other forums about people having trouble playing Blu-ray DVDs on a wide variety of HP computers. I went back to the specifications of my HP computer, and I found the following disclaimer about that computer's Blu-ray capabilities:
As Blu-Ray is a new format containing new technologies, certain disc, digital connection, compatibility and/or performance issues may arise, and do not constitute defects in the product. Flawless playback on all systems is not guaranteed. In order for some Blu-ray titles to play, they may require a DVI or HDMI digital connection and your display may require HDCP support. HD-DVD movies cannot be played on this Desktop PC. Some HD DVD and Blu-ray advanced features may not be supported. CPU power is dedicated to support HD DVD and Blu-ray playback functions. It is recommended that you close all other applications before and during HD DVD and Blu-ray playback. HD DVD and Blu-ray movies will only play through the HD DVD and Blu-ray player software. Advanced Access Content System (AACS) keys are integrated into your PC for copy protection purposes. Occasional renewal of the AACS key is required, and easily done by connecting to the internet.
I believe that I have gone way above and beyond ordinary diligence, to try to get my computer to play Blu-ray DVDs. The disclaimer states that certain issues may arise and that flawless Blu-ray playback is not guaranteed for all systems. But certainly my frustrating experiences, and the frustrating experiences of others, go way beyond the leeway given by HP's disclaimer, do they not? Has anyone thought about the possibility of a class-action lawsuit against HP?

In "Device Manager", under "DVD/CD-ROM drives", I see the following:
hp BDDVDRW CH20L
I click on "hp BDDVDRW CH20L", and I see several tabs.
In the tab marked "Driver", we have the following:
Driver Provider:   Microsoft
Driver Date:           6/21/2006
Driver Version:     6.1.7601.17514
Digital Signer:      Microsoft Windows
In that same tab, clicking on "Driver Details" gives us the following:
Driver files:      C:\Windows\system32\DRIVERS\cdrom.sys
Provider:           Microsoft Corporation
File version:    6.1.7600.16385 (win7_rtm.090713-1255)
Copyright:       Microsoft Corporation. All Rights Reserved.
Digital Signer:   Microsoft Windows
I think that, back in October 2014, when this Blu-ray issue first came up, I updated the driver. That may be why you see the following different versions :
6.1.7601.17514
6.1.7600.16385 (win7_rtm.090713-1255)
So, how would I update the firmware? To what version should I update the firmware?

Premiere Elements 11 .iso Image für Blu Ray erstellen

Hallo,
Kann man mit Premiere Elements 11 ein iso Image für blu rays erstellen?
Habe es mit dieser anleitung versucht, aber mir wirt der isoauswahlbereich nicht angezeigt (nur Ordner oder Disk)
Adobe Premiere Elements – Hilfe | Freigeben auf DVD oder Blu-ray-Disc
Kann mir jemand sagen ob das mit Premiere Elements 11 funktioniert oder ob das erst ab Version 12 /13 funktioniert?
Danke
And now i trie it in english
Hello,
Is it possible with Premiere Elements 11 Create an iso image for blu rays?
Tried it with this manual, but my host does not appear isoauswahlbereich (only folder or disk)
Adobe Premiere Elements – Hilfe | Freigeben auf DVD oder Blu-ray-Disc
Can anyone tell me if this works with Premiere Elements 11 or whether the only works from version 12/13 me?
Thank You

JGeneratorH
Thanks for the follow up and glad to learn that the Phantom Burner worked for you.
Thanks also for the information on the link to Phantom Burner in the blog post. I will update that link in a few moments.
Please let us know if any questions or need clarification on your Premiere Elements workflows. Glad for the opportunity to be of
assistance.
Best wishes
ATR
Add On...Just updated the Phantom Burner 2.0 link in the blog post and added this footnote.
**UPDATE January 8, 2015. The original link to the Phantom Burner 2.0 used when this blog was written is no longer working to obtain the Phantom Burner 2.0 and has been replaced this day with a link that is working to obtain the Phantom Burner 2.0 tryout download (phantomburner_setup.exe). This new link seems to be working to obtain the "Phantom Burner 2.0", but the Learn More and Purchase buttons for this choice do not work. Interestingly, the old and new links are from the same web site, just different pages of the web site. At this time, it is not known if this reflects problem with the PHANTOMbility.com web site or something else.

Blue squares over moving images and videos, Blue squares over moving images and videos

Similar Messages

Maybe you are looking for