Blue Tooth connectivity no longer working in Mazda 3 on ios8 with iPhone 6

I'm imagine I'm not the only person having these issue's and I'm hoping that Apple will release a fix soon but wanted to know if anyone has had any luck with a work around that doesn't involved completely wiping your phone, which I've done with zero success.

Hi YAC08,
Thanks for visiting Apple Support Communities.
The steps in this article have helped some users who were pairing their iPhones with a car stereo prior to iOS 8:
If you can’t use a Bluetooth accessory or car kit
Additionally, here are some other troubleshooting tips to keep in mind:
Verify compatibilityContact the manufacturer or refer to your car stereo's user guide to see if your device is compatible.
Note: Some accessories may have limited compatibility.
Update software and firmware if necessaryVerify that both your car stereo and your device have the latest software versions. Contact the manufacturer to see if any updates are available. If your device does not have the latest version of the iOS, update to the latest software version.
Bluetooth
Car stereos with Bluetooth may allow you to pair a device that can play calls or music through the car speakers. Ensure that your car stereo supports the A2DP Bluetooth profile before attempting to pair an iPod with it.
Note: iPhone can also connect using the HFP Bluetooth profile because it uses HFP to make phone calls through your stereo speakers. iPod devices do not have this protocol (because iPod devices aren't phones).
You can check for the A2DP Bluetooth profile by attempting to play music from your iPhone through your stereo speakers using Bluetooth. If calls route to the stereo speakers but music doesn't, it might not support A2DP. Contact the manufacturer or refer to your car stereo's user guide to see if your device is compatible.
Disconnect and restart
If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
Isolate the issue
Try to reproduce the issue with an identical or similar accessory, if one is available, or test with a second device.
From:
iOS: Troubleshooting car stereo connections
Best Regards,
Jeremy

Similar Messages

MacBook to tv connection no longer working. OS 10.8

I have a mid-2010 MacBook, running OS10.8. I was able to use my Panasonic TV as a monitor but the connection no longer works. I tried the "Safe Mode" solution and that worked for awhile. After trying to connect (unsuccessfully), when I turn the tv off (still connected to lap top) the lap top screen flashes blue for a nano second.
Any suggestions for getting around this problem?

Your version of Mail didn't upgrade properly because you've moved it from its expected location location (to a sub folder you've named "APPLE apps").
Move it back into the HD/Applications folder and apply the 10.6.8 "Combo" update to fix things.

Can you use earphone jack and continue to use blue tooth connection to speakers like bose

Can you use earphone jack and continue to use blue tooth connection to speakers like bose

Hi,
I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
Hope it helped!

Blue tooth mouse doesn't work

A logitech m305 blue tooth mouse does not work on 15" Macbook Pro - works on the 12" however. Any suggestions for trouble shooting?

Michael Thompson6 wrote:
Right, the receiver was plugged into the USB port of the computer that I was trying to use the mouse with. And it worked on the 12" mbp and a mac desktop, but not the 15" mbp. So, I am not sure about anything. BTW, thanks for the Amazon picture showing the rf receiver. I will try to download a driver for the M305 onto the 15" some day.
Ok, it sounds like you have a handle on the situation. It's still strange that the mouse won't work at all on the 15" with the correct receiver installed. Usually the basic click and tracking functions will work even without special drivers. But, as you said, you do want to install the proper software for that mouse. Also make sure you try the reset button/process on the mouse. Once in awhile one of mine likes to be a bit finicky after I move from Mac to Mac, and I have to reset it (it "pairs" or establishes the connection between the mouse and receiver).

I keep loosing blue tooth connection resulting in mac mini freezing.

I keep loosing blue tooth connection resulting in mac mini freezing. I am using an apple wireless keyboard and mouse. This did not happen until i upgraded to mountain lion. your thoughts
I leave the system on with Itunes loaded so I can use it for my media center with my Apple TV's
I use Super Duper every night at 2am for back as well as time machine.
I have the newest mac mini
2.3 Ghz Intel i5
8 gb of ram
i have 3 WD 2TB Hard drive connected (2) USB (1) Firewire
Also a Plextor blueray drive
Hooked to a Apple HD Monitor
Please Help.
I have been in tech support many times. I also brought it into my local Apple store.
Frustrated .
I spent a lot of $$ to make this set up happen
Please help.
Scott Southard
[email protected]

Did you ever find a resolutution to your issue? I have a similar issue after installing Mavericks where the Arris modem goes to sleep when my iMac does, even though other devices on the network are actively requesting data. For the time being, as long as the iMac doesn't sleep the network is fine.

Phone turns off blue tooth connection after 30 seconds into the call (when screen goes to sleep)

Installed 2.2, paired my fascinate with my plantronics explore 240 headset, accessed voice dial (which worked), connected my call, after thirty (30) seconds the blue tooth connection dropped, picked up the phone and continued the conversation. Just turning on bluetooth and leaving the phone sit for 5+ minutes keeping the screen active the blue tooth does not turn off, let the screen go to sleep and the blue tooth turns off.
I can not maintain a blue tooth connection when the screen goes to sleep, not even during a call. Is there a setting I am missing to keep this from happening or ... An alternative?
Any help would be appreciated

Hi.
The Bluetooth should not disconnect when your screen goes to sleep. Have you tried re-pairing the Bluetooth since the upgrade? Below I have provided you with the steps to pair the Bluetooth again. (Please make sure both devices are fully charged when doing so.)
Step 1 - Enable Bluetooth functionality on the Samsung Fascinate.
Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
From the main screen, tap Menu.
Tap Settings
Tap Wireless & Networks
Tap Bluetooth to turn on Bluetooth
Step 2 - Put your fully charged Bluetooth headset into pairing mode.
Start with your Bluetooth accessory powered off.
Press and hold the Call Control Button until the light indicator flashes blue and red.
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset.
Step 3 - Pair the Samsung Fascinate with a Bluetooth Accessory.
Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
From the main screen, tap Menu
Tap Settings
Tap Wireless & Networks
Tap Bluetooth Settings
Place accessory in pairing mode, see accessory pairing instructions.
Tap Scan for Devices, device starts Searching.
Tap [Plantronics Bluetooth] to pair
Pairing Complete, touch home to exit.
If you still need assistance, please send me a Private Message and I will be happy to help you.
Thanks,

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

Remote Desktop Connection no longer works.

After verifying that all Remote Desktop Connection settings and firewall settings match the requirements, I cannot connect to the host computer running Windows 8.1 Pro with Media Center from a client computer running Windows 7 Home Premium SP1 over my
home (private) network. I was previously able to connect these same two computers when the host computer was running Windows XP Pro, but now that I have upgraded its operating system to Win 8.1 Pro the connection no longer works. The Windows Troubleshooter
cannot find the problem. What is wrong?

If you turn off a firewall in a router it is still using NAT which will also act like a firewall. In my experience its better to let your router be the firewall.
On most routers that have an SPI firewall you have to setup 2 rules to allow remote connections. One would be the firewall rule and other would be the port forwarding(NAT) rule.
Are you forwarding the correct ports to your mac from the router? Does your Mac have a fixed IP address?

Remote Desktop Connection no longer working

Hi, I really hope someone can please help me. I just switched from Comcast to FIOS and I can no longer remote desktop to work - so I'm not getting paid until I can get it fixed.
The way that I was doing it before was to connect with a regular Microsoft VPN (I have Windows XP Professional), and then I would use Remote Desktop Connection to log into the work PC. Since I switched to FIOS it no longer works on either my laptop with wireless or my desktop which is connected to the router.
The VPN seems to be connecting OK; it says it is and it is sending/receiving a small bit of data. But when I open the the RDC and try to connect using the PC name it says that the computer cannot be found. I tried to connect to the IP address of it (after connecting through the VPN) and then it says it's found but cannot connect.
There is another location to which I log in using a Cisco VPN and then Remote Desktop - that still works just fine. Nothing at work has changed; everyone else can log in with no problems, including everyone else with FIOS.
I honestly have no ideas at all; this is not my area of expertise to say the least. If anyone could help I would REALLY appreciate it!
Thanks much!
Solved!
Go to Solution.

It is a new Actiontec router.
I finally got it resolved; one of my coworkers suggested checking to make sure that the IP addresses were not in conflict, and they were. So, if anyone else has this problem, what happened was that the new router was assigning IP addresses to my PC's at home in the 192.168.1.x range, which was also the server at work's IP address.
So the really dumbed down version (for people like me!) is to open a command prompt on your desktop, run ipconfig /all, and then it will tell you your internal IP address. (I was getting thrown off because the ROUTER'S IP address, which is the one you can look up online, was different). If the PC's IP is almost the same as the server IP address, then you have to change the IP range on your router to something like 192.168.114.x. There's directions if you google the router specs; I had to change it in three places on the router software; the router IP, the begin range and the end range.
Thank you, jumpin68ny, for starting to help me. Hopefully now this may help someone else!

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the cameras WIFI. Since I installed IOS7 the connection no longer works. Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the camera's WIFI. It was all working well until I installed IOS7. The connection no longer works. The camera still keeps the iPad in its connection history. The camera's wifi network still appears when I select a WiFi network from the iPad but the Wifi status icon never appears on the iPad. So the connection is never made.
Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

TC 2 TB A1409 Wan internet connection no longer working but light is still green?

TC 2 TB A1409 Wan internet connection no longer working but light is still green?
My TC and modem have been up and running for at least the last 2 years without any issues.
It recently started acting up and I would have restart it as I had no internet access. All of a sudden My TC stopped connecting to internet regardless of restart. Utility shows i have no internet connection. I had all the correct green lights on my modem. I figured it might be the modem and connected directly to single ethernet port in modem to my mac book and it worked. When I reconnect modem to TC and restart Modem, TC still shows no internet connection in utility even though I'm getting green sync light on TC.
Help Please.
I'm out of warranty, I have not reset to default yet, Im not sure if I will loose my TC back up data.
please advice
Remy

The Gen4 has some nasty faults.. mostly unrepairable...
If the WAN is gone it becomes pretty well useless at least in its current role as router.
You might still be able to plug it in by ethernet to a LAN port in bridge.
Do try a full factory reset.. always worth a go.
No files will be lost on the hard disk.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Check the ethernet LED is going on.. both on the modem and the TC WAN port.
Do you have any applecare on a computer? If so it might cover the TC.. the rules are complicated but if the TC was bought within 2years before or after the computer it is covered up to max of 3years. You can still get coverage therefore if the TC is over 1 year but less than 2 years by buying applecare now on a computer or an Apple TV which is not too expensive. You can sell off the Apple TV without even opening it.. but use the applecare on it to get your TC replaced.
Only the very first Gen4 will be up to 3years.
Did you have a lightning storm or something btw?? Sometimes the modem can survive and pass the parcel to the TC which seems rather fragile.
There is also a trick to test..
You must have v5 airport utility.. any older Macs, or windows computer you can load on 5.6 utility .. even dual boot/parallels mac.
Go to the WAN setup.. and set the ethernet port to 10mbit half duplex.
Sometimes a damaged port can still manage the slowest speed.. by magic.

Blue tooth Device is not working in Iphone 4s why?

Recently i purchased a New iphone 4s,
I previously used to use 3gs i know for 3gs blue tooth will not be working.
But everyone told me that blue tooth works for iphone 4s, Really getting annoyed by Iphone 4s for the first time.
Pls help me in resolving the issue.
and i was using version 5.1.1

tpride8 wrote:
Should i call Apple directly to alert them?
Why?
tpride8 wrote:
After some research i have found that this is happening in MANY other cars (vokswagen, acura, etc.) and Mercedes told me they have only received these concerns with Apple products.
Sorry, but that does not mean it is an Apple issue.
Try deleting the pairing then pairing the devices again. Does the problem continue?
If it does, try basic troubleshooting from the User's Guide which is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue is still occurring at that point, take the device to Apple for evaluation and possible replacement.
Nothing you've stated indicates and Apple issue. If it were, all users with similar cars and head units would be having the problem and that simply is not the case.

Safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

Hi Apple,
iphone 5s latest updates , safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

Hi,
If you are absolutely sure that neither the sound output of the Macbook nor the sound output of VoiceOver are muted then try to reset VoiceOver.
1. Open VoiceOver Preferences.
2. From the File menu choose "Reset All VoiceOver Preferences …".
3. Click "Reset.
4. Turn VoiceOver Off and On again. (hold command and press F5 twice).
If you still don't hear anything then it could be that the main sound output of the Macbook got muted somehow. I find that I often hit the mute button on my Apple wireless keyboard without noticing. So just make sure that its not muted and also hit the "Volume Up" a few times. Its so terribly obvious I know but its also very easy to miss. Lots of people do that.

What is the dial number for blue tooth connection ...

Hi,
I can't seem to find out what the dial up number is for my blue tooth connection. I assumed it was my mobile mnumber but when i try this it says (on the mobile) that there is an error with connection.
I have tried calling the suport line but don't get though to any so end up hanging up.
Thanks,
Bar

have no idea on that but try 0000
Nokia N95
V 20.0.015
0546553

No Services and Touch ID no longer working anymore after i upgraded my Iphone 6 from IOS 8.00 to 8.02 today!!!!

OMG! No Services and Touch ID no longer working anymore after i upgraded my Iphone 6 from IOS 8.00 to 8.02 today!!!! Any Idea how to fix this?

Go to settings do a reset after that tou will need to enter you Router wireless key Then wait for iPhone to come on. This worked for me on iPhone & ipad. Bsydd uk

Blue Tooth connectivity no longer working in Mazda 3 on ios8 with iPhone 6

Similar Messages

Maybe you are looking for