Blue tooth not available message

message notes "blue tooth not available"  how do i fix this error message

This will help you:
http://support.apple.com/kb/ht1153

Similar Messages

  • Blue tooth not available

    blue tooth not available

    Hi Sally:
    SMC=system management controller.  Type SMC into the search box for a description.  I did not mean you should do anything else!
    Barry

  • I am getting a Mobile Network Not Available message when trying to make phone calls

    I am getting a Mobile Network Not Available message after phone was drained for a few days. Texting works, internet works, I just cannot make calls.

    Statosphere II
    I've reset most everything, taken out battery/replaced, also set up roaming (all)
    Can't check voicemail either
    Thank you!

  • EDI: Partner profile inbound not available Message no. E0337

    Hi Friends,
    I am facing very wiered issue for incoming vendor frieght invoice. When the IDOC is sent to SAP from the edi subsystem, it gets posted with status 56 and error message
    EDI: Partner profile inbound not available
    Message no. E0337
    Diagnosis
    An inbound partner profile could not be found with the following key:
    /0040000010/LI/VN/INVOIC/MM///
    This involves the key fields of table EDP21:
    -SNDPRN  partner number of sender
    -SNDPRT  partner type of sender
    -SNDPFC  partner function of sender
    -MESTYP  logical message type
    -MESCOD  logical message code
    -MESFCT  logical message function
    -TEST    test flag
    I have created the partner profile in WE20 for Partner type LI, partner role VN and process code INVL, message type INVOIC, message code MM. I have also checked the entry in TABLE EDP21 and the entry exists.
    When I open the IDOC in WE19, and click on standard inbound TAB it says partner profile not maintianed, however when i click on the control record it opens a dialog box, where we have all the entries for partner profile and when I just click on any field in the dialog box and click continue and when again click on standard inbound it say partner profile maintained.
    None of the data is changed in the IDOC control record, I just click on any field and it finds the partner profile.
    Please let me know your thoughts, what could be possible reason and a solution.
    Thanks
    Deepak

    Hi Deepak,
    I am facing the same problem with a different message type.
    But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
    Have you found the reason for this?
    Thanks,
    Florian

  • CIMC on C210 server throws Error 2001: Service not available message

    I am trying to configure vmware on a brand new C210 server for the first time and the directions say to access the CIMC and load the vmware media. Sounds easy enough except every time I go to the CIMC webpage I recieve an " error 2001: Service not available"  message on every page I go to and none of the server info fields are populated. If I try to make any changes and save my settings the same message pops up and no changes are saved. Almost like the CIMC doesn't recognize the server or hardware. I ran the host update utility just now and upgraded the firmware for everything to the latest version but still no progress. Anyone have this happen or know how I can fix this?
    Thanks in advance!
    Jess

    I got it working on one of the servers, and havent tried the same solutions on any other server.
    What i did was manually adding an IP adress to the management IP, then save the config before rebooting. After rebooting i put it back to get IP from DHCP, and saved the config. After a secound reboot i was able to use the mangement interface without the 2001 error.
    I'm not sure if it will work on the rest of the servers, but it's worth a try
    Regards
    Alex

  • In App Purchase showing "Service Not available" Message box with error code 805a01f4

    Hi all ,
            I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
    in a bit . This error code may be helpful : 805a01f4 ." 
    Please tell me how to resolve .
    Thank you

    Thanks for your response .
    I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After  few seconds got a message on my number that "Dear customer,
    thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ? 

  • I have reset my email password &now when I sign on I receive "yahoo server is not available" message.

    I have reset my email password &now when I sign on I receive "yahoo server is not available" message.

    Welcome to the Apple Community Michael.
    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account. You may have already done this.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • Why do people using other brands of smart phones get a "not available" message when they try to view vids that I made on my iPhone 4s?

    I made a video on my iPhone 4S and e-mailed to another party to view. The other party told me he could not view it. He said he got a "not available" message when trying to view it. Next I sent the video to him in a text message. He had the same problem again.

    I have the same exact problem. let me know if you figured anything out

  • "NOT AVAILABLE" Message keeps popping up on tv

    Hello!
    I have had my television for about two years not, and the past year, the "NOT  AVAILABLE" message has been popping up.  At first not so much, but now more often than not.  The message become quite annoying as it stays displayed on the screen while watching tv.  It also disables the remote control.  How can this be fixed?
    Thanks
    Liss

    I found how to fix it myself.
    In my case, something was wrong with the signal comes from the button control on the left side of the TV.
    ========================
    What I did
    ========================
    unplug the power cord.
    Remove back cover.
    Look into the motherboard ( biggest green at the center).
    First, I disconnect a connector on the motherboard come from the IR board that receive the wireless signal control ( meaning the remote is disable).
    I turn on the TV, press on Menu button on the TV side. Menu is still scrolling.
    I turn off TV, disconnect power cord and connect the IR connector back to the motherboard.
    I then disconnect the nearby connector that comes from the side control buttons.
    Turn on the TV by remote, press menu button on the remote to check. The menu stays.
    DONE.
    I use electric tape to seal off the connector and let it hanging there.
    Close the TV back panel
    I have been watching TV for 3 nights without menus/channels scrolling.
    NOT AVAILABLE red message when watching DVD is no longer existed.
    Hope this help someone else.

  • Blue tooth not recognized by I phone

    need ifno to connect blue tooth not recognised by Iphone

    Hello masterguide,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Best of luck,
    Mario

  • EDI: Partner profile inbound not available - message variant

    Hi Friends,
    I am gettin error "EDI: Partner profile inbound not available" when sending message from XI to R/3 on R/3 side.
    I checked to partner profile and it is correctly maintaind .
    One thing I noticed is in the control record of that idoc,under typeinfo tab, message type is orders and message variant is ALW. I dont knw what this message vaeiant means,n where it came from, but when i process idoc in we19 by removing this message variant, its working properly..
    give ur suggestions.
    Thanks........

    Hi Kiran,
         Check your Partner Profile Message Settings in we20.
         [Error: "EDI: Partner profile inbound not available";
    Regards,
    RajeshKumar.D

  • "connection not available" message on E71

    My Nokia E71 stopped connecting to the internet on 5th of this month and talks have been on with my operator. My phone is able to connect to the internet using another service. I just thought of resetting the phone with a hope that everything can work fine. After I restored the phone, I am getting a message “connection not available”. I have the settings from the operator and I saved them. But still when I try to connect to the internet it’s giving the same message “connection not available”. What could be the fault and what can I do to it? Thank you.

    Frankly to say, i do not have much knowledge on the stuff relating to the phone. But, will provide the information what all i can basing on your questions.
    My phone is approximately 6 months old.
    I am on the firmware 500.21.009
    Whenever i open my browser it asks me how i want to connect to the internet. There are three access points. So, may be there is no default access point set.
    My carrier is vodafone.
    I have never used wi-fi on my mobile.
    Data plan is activated on my mobile.
    Thank you.

  • Hands free blue tooth not connecting and sound quality poor

    I recently upgraded from a iphone 3g to the iphone 4. The 4 does not automatically connect to the hands free blue tooth in my Hyundai. I have to turn the phone off and then back on for the hands free in the car to connect to phone. On my 3g I turned on the car and it automatically went to the hands free speakers. Also people tell me they are having trouble hearing me, saying I sound very far away. I never had these problems on the 3g.
    Does anyone have any suggestions? This is frustrating because I am constantly in and out of my car and getting many calls from clients and staff while on the road.

    I installed IOS4.1 and the bluetooth handsfree connects about 20% of the time without having to power off the phone and turning it back on. I deleted the phone on the handsfree and re-pared the phone.
    Something is still not right with the iphone4 and bluetooth connection.

  • CONSTANT "Supported Disc Not Available" message when trying to play DVDs

    Does anyone have any idea what the **** is going on with Leopard!? Specifically, whenever I insert a DVD to play it in DVD Player 5.0, i almost always encounter the message "Supported Disc Not Available". At first I thought perhaps it was that I was trying to use some DVD encoded or burned with really new technology or something but then thought that that wouldn't be the problem since Leopard was just released and well after the most recent video DVD formats. Furthermore, the DVDs in question were released years ago. That said, what the **** is going on. I've verified and repaired disk permissions millions of times. I've tried restarting, shutting down and waiting then restarting...nothing seems to help. Can anyone advise?

    Hi everybody, I have experienced that frustration also. I don't clearly know why the message appears, however I know that it happens with discs burnt form a computer (just like ronanocallaghan said). I haven't found a way to solve the precise moment, however THERE IS a way around it. When you open DVD Player instead of clicking on "Play" go to File > Open DVD Media. Once the dialog box appears select the DVD, select the folder inside the DVD most likely called "VIDEO_TS" and click open. This way the DVD Player will successfully find the movie or whatever you are trying to see. I don't know the reason but hey, it works. Another weird thing is that this just happens in the computer because if you try to play it in a DVD it doesn't give not error! Hope it helps and i'll keep finding the reason of why it doesn't work!

  • HT204135 Downloaded Epson drivers V 2.15 for my Epson RX620 and "scanner not available" message appears

    After downloading Epson drivers V 2.15  the message "scanner not available" still appears on my Epson RX620. Help?

    Hello, Carolyn,
    Thank you for your suggestion. Image Capture does not recognize the scanner.
    I have tried reset and that did not work either.
    Interestingly enough, I have Windows XP partitioned and the scanner functions perfectly. Just  would be nice it I did not have to switch to XP every time I need to scan.
    Thank you again for responding.
    Richard Loomis

Maybe you are looking for