Blue tooth not recognized by I phone
need ifno to connect blue tooth not recognised by Iphone
Hello masterguide,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Best of luck,
Mario
Similar Messages
-
Blue tooth not recognizing my car phone
I restored my phone from iTunes and now my blue tooth is not recognizing my car phone. Any ideas?
You need to pair it again.
-
Blue tooth not available message
message notes "blue tooth not available" how do i fix this error message
This will help you:
http://support.apple.com/kb/ht1153 -
What is the Best Blue Tooth headset for the i-phone 3 G? And why?
Could anyone please tell me what the best Blue Tooth headset for the I-Phone 3 G is, quality and comfort wise, I have tiny ears and don't like the headset that they give with the i-phone it hurts in my ears! If there is a headset that is super comfortable, can you please post and also tell me the pros and cons. Thanks
just opinions now.
I drive a truck so I use a Blueparrot BT150. Crystal clear reception, and no one, and I have asked, can tell that I am on a headset. Best noise cancelling mic on the market in my opinion. BUT, it is bigger than most headsets and some people don't like that.
On the smaller side...finally found what my wife and I think is the best bang for the buck for hers. The Jabra BT 530 Blackmagic. Its small, lightweight, and from my experience talking to her, an extremely good noise cancelling mic. -
blue tooth not available
Hi Sally:
SMC=system management controller. Type SMC into the search box for a description. I did not mean you should do anything else!
Barry -
Purchased a iPhone 5 to replace a 3, itunes is not recognizing the new phone. All of my email accounts and calendars have switched, what do I need to do to be able to access apps?
iOS: Device not recognized in iTunes for Mac OS X
iPhone:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
If the issue persists after following the troubleshooting assistant, continue with the steps below, testing to see if the issue is resolved after each section.
Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch. iTunes 10 and later requires Mac OS X v10.5.8 or later.
Update to the latest version of iTunes and Install software updates on your Mac.
Check USB connections. iOS devices require USB 2.0 to function properly. If you are not sure if your Mac has USB 2.0 ports, refer to the computer's specifications. Disconnect other USB devices, and connect your device directly to a USB port on your Mac.
Restart your Mac. -
Hands free blue tooth not connecting and sound quality poor
I recently upgraded from a iphone 3g to the iphone 4. The 4 does not automatically connect to the hands free blue tooth in my Hyundai. I have to turn the phone off and then back on for the hands free in the car to connect to phone. On my 3g I turned on the car and it automatically went to the hands free speakers. Also people tell me they are having trouble hearing me, saying I sound very far away. I never had these problems on the 3g.
Does anyone have any suggestions? This is frustrating because I am constantly in and out of my car and getting many calls from clients and staff while on the road.I installed IOS4.1 and the bluetooth handsfree connects about 20% of the time without having to power off the phone and turning it back on. I deleted the phone on the handsfree and re-pared the phone.
Something is still not right with the iphone4 and bluetooth connection. -
RAZR not recognized as "Mobile Phone"
I have been trying to get my PBook to recognize my RAZR as a Mobile phone. First the basics - my PBook (15" Aluminum 1.25 GHz / FW 800) has built-in BT and that is working fine. I can see the device and can xfer files using the BT File Transfer util. I am setting the phone as discoverable, and the little Bluetooth icon flashes on the phone. I'm running Tiger with all updates installed - all that are available via Software Update as of today's date.
If I use the "Any Device" option in the BT setup wizard, my phone shows up in the list and I can successfully pair with it. If instead I choose "Mobile Phone" I can't see the phone. I've tried deleting the Bluetooth preference .plist files, removing the device pairings and then re-running the wizard, but the only thing I can get to work is the "Any Device" option. After being paired, the following shows up in the BT "Device" tab in System Preferences:
Device Name: troy's RAZR
Device Address: 00-14-9a-dc-15-8a
Device Type: Computer
Device Services: , Voice Gateway, Hands-Free voice gateway, OBEX Object Push, OBEX File Transfer, Dial-up networking Gateway
Paired: Yes
Configured: Yes
Favorite: Yes
Connected: Yes
I'm having problems getting the PBook to actually 'see' the phone as a modem (have also followed a bunch of other instructions here, including d/l-ing some of the modem scripts for the Moto phones). I can't iSync with BT, either. The RAZR is not seen by iSync.
I'm missing some key parts of the setup that are done via the Mobile Phone setup screen, and I think that is the root of my problem. Any ideas on how to fix this? Why is the RAZR not recognized as a Mobile phone?
Thanks!!I can't get my PowerBook to recognize my V3 at all. I have had complete success with my V600, but today I got a new V3, and I'd like to get my numbers from the V600 to the V3. There are too many to copy them to the SIM card (I hate the way it's all or nothing!), so I'm trying to do it with iSynch. I have managed to synch the V600 with no difficulty, but I can't even pair the V3. Is there some optimum position you need to hold the phone in relation to the PowerBook, some secret incantation or what? I tried selecting Mobile phone and Any device, but neither one works, and I've tried it on two different user accounts, so I don't think it's a preferences issue either.
-
Hi
I have looked and looked for the answer on here but can't so if I am
Repeating sorry
I tried to use my blue tooth but it seems that recently it has stopped
Working and when I go to finder it shows up but when I try to
Connect it I am told can not connect I have been trying to use magic mouse
Which also stopped working Bluetooth can't find it
Any ideas
Thankshi VIVKGP,
Thanks for Posting!
Please check under Control Panel and uninstall Lenovo energy Management and uninstall it,
Now Download and install this, now Download and Install this.
Lenovo Energy Management -WIndows 7
caez29ww.exe
13.6MB
Restart after Installation
After Installation:
Press Fn+F5 and make sure Wifi and bluetooth are on "ON" status.
You can also Try installing Drivers for both.
Broadcom Bluetooth Driver
IN3BTH50WW5.exe
58.8 MB
Intel Wireless WiFi Link Driver
IN1WLN101WW5.exe
138 MB
and check the status again.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
My iphone 4 shows the itunes plug-in but is not recognized in itunes. Now it appears locked and I can't get it to work at all. Help!
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
After the successful Restore... Sync everything back from the computer you have regularly been Syncing and Backing up to... -
Blue tooth not working with u connect using lastest update
Any help ? I have a 3GS and its lastest with software. Blue tooth was working fine unlit update. No solutions with crysler as of yet for this problem.
software is 6.1.3
-
Ipad 2 blue tooth not pairing with plantronics voyager legend
Ipad 2 is not pairing with plantronics Voyager Legend (blue thooh) but this device (blue thooh) is pairing working good with my iphone 4s
http://www.plantronics.com/us/support/kb/detail.jsp?vfurl=/articles/en_US/Troubl eshooting/Compatibility-statement-in-regards-to-the-Apple-iphone-5-and-the-Voyag er-Legend&retURL=%2Fapex%2FknowledgeSearch®ion=us&p=&c=All&k=Voyager%2BLegend &t=All&lang=en_US&popup=false&c=All
-
Had to restore 4s blue tooth not working now
Had to restore my phone after disabling it. Now my Bluetooth will not connect with my vehicle help!!
Had to restore my phone after disabling it. Now my Bluetooth will not connect with my vehicle help!!
-
I'm completely confused over this...
I just installed Logic and was playing around with it this morning. Singing into a blue snowball mic worked fine until out of nowhere, it started recording from the built-in mic. So I make sure in system preferences the blue mic is selected... But in Logic I only have the option of the built in audio.
I figure maybe the mic is faulty but it works fine in Garageband.. also tried to make it an aggregate device with no luck--no sound!
I'm totally confused, please help?Check out the following thread and do a Google search for others with your same problem.
-
Purchased app not recognized on new phone
i upgraded my iphone 4 to a 5s today and one of my apps isn't showing up on the new phone after i synced everything.
apparently i hadn't backed up to the cloud after i purchased the app but i thought i did. oops!
i paid 1.99 for it and i'm trying to avoid paying again. any ideas?Hello zoography,
The article below details how to download items you've purchased from the iTunes and App Stores.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen
Maybe you are looking for
-
How to go for Unicode conversion?
Hi All, Presently i'm upgrading my SAP 4.7 system (6.2 WAS) in to ERP 2004 (6.40 WAS), which is an non-unicode upgrade. Now should i first complete Unicode conversion or apply the latest SP stack. Also please tell me how this Support pack will affect
-
I have the Boxwave Keyboard Buddy Case and when I am in the Messages app, it seems to think the virtual keyboard is there, but really isn't.......I can't see the vKB....its just a blank space...this happens up to 5.1.1, but didn't happen before iOS 5
-
Menu Bar goes missing when I close a page/program?
I am using a 13 MBA 2013 and whenever I close the browser of app store, iPhoto etc, the top menu bar dissapears until I click on the wallpaper at the desktop. Any ideas?
-
Hyperion analyzer installation issue
Hi, I am installing Hyp analyzer 7.2.5. Can any one tell me ..why the below warnings are arising The InstallShield Wizard has successfully installed Hyperion Analyzer 7.2.5. Choose Finish to exit the wizard. However, the following warnings were gener
-
VD02 Additional Data not editable
Hi Experts, I am wondering if it is possible to make any of the additional data fields(kna1-katr1 - 5 and knvv-kvgr1 - 5) in the customer master non editable? I see in configuration where we can choose to suppress, make optional, etc some of the cust