Blue tooth not recognizing my car phone

I restored my phone from iTunes and now my blue tooth is not recognizing my car phone. Any ideas?

You need to pair it again.

Similar Messages

  • Blue tooth not recognized by I phone

    need ifno to connect blue tooth not recognised by Iphone

    Hello masterguide,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Best of luck,
    Mario

  • My older iPod is not recognized by cars with a newer iPod interface

    And my new iPod Classic is not recognized by cars with the older interface. 
    I purchased a new iPod when I realized my new car wouldn't wouldn't recognize my older iPod.  Now I find my two older cars won't recognize the new device.  Is there an interface cable adapter out there anywhere?

    The Jaguar there is nothing you can do, and the new interface from the dealer are not compatible
    For the BMW, you have to find out what brand interface was installed in the vehicle
    can be dension or original BMW  in the x5, if dension you can get something call
    Scosche passPORT if  BMW brand you can get a new cable from Bmw with the usb and dual power supply,
    In the Mini if DIce brand you will need a new cable or new iPod interface, now they have a usb plug to do updates in case iPhone 5 is release in the future or any other updates from iTunes
    http://www.oemautosound.com/pc-457-164-dice-i-bmw-t5v-mini-cooper-2002-2008-to-i pod-text-ready.aspx

  • Blue tooth not available message

    message notes "blue tooth not available"  how do i fix this error message

    This will help you:
    http://support.apple.com/kb/ht1153

  • What is the Best Blue Tooth headset for the i-phone 3 G? And why?

    Could anyone please tell me what the best Blue Tooth headset for the I-Phone 3 G is, quality and comfort wise, I have tiny ears and don't like the headset that they give with the i-phone it hurts in my ears! If there is a headset that is super comfortable, can you please post and also tell me the pros and cons. Thanks

    just opinions now.
    I drive a truck so I use a Blueparrot BT150. Crystal clear reception, and no one, and I have asked, can tell that I am on a headset. Best noise cancelling mic on the market in my opinion. BUT, it is bigger than most headsets and some people don't like that.
    On the smaller side...finally found what my wife and I think is the best bang for the buck for hers. The Jabra BT 530 Blackmagic. Its small, lightweight, and from my experience talking to her, an extremely good noise cancelling mic.

  • Blue tooth not available

    blue tooth not available

    Hi Sally:
    SMC=system management controller.  Type SMC into the search box for a description.  I did not mean you should do anything else!
    Barry

  • HT1438 purchased a new iPhone 5 to replace a 3 - iTunes is not recognizing the new phone - what do I need to do

    Purchased a iPhone 5 to replace a 3, itunes is not recognizing the new phone.  All of my email accounts and calendars have switched, what do I need to do to be able to access apps?

    iOS: Device not recognized in iTunes for Mac OS X
    iPhone:
    Apple - Support - iPhone - iTunes Troubleshooting Assistant
    If  the issue persists after following the troubleshooting assistant,  continue with the steps below, testing to see if the issue is resolved  after each section.
    Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch. iTunes 10 and later requires Mac OS X v10.5.8 or later.
    Update to the latest version of iTunes and Install software updates on your Mac.
    Check  USB connections. iOS devices require USB 2.0 to function properly. If  you are not sure if your Mac has USB 2.0 ports, refer to the computer's specifications. Disconnect other USB devices, and connect your device directly to a USB port on your Mac.
    Restart your Mac.

  • Hands free blue tooth not connecting and sound quality poor

    I recently upgraded from a iphone 3g to the iphone 4. The 4 does not automatically connect to the hands free blue tooth in my Hyundai. I have to turn the phone off and then back on for the hands free in the car to connect to phone. On my 3g I turned on the car and it automatically went to the hands free speakers. Also people tell me they are having trouble hearing me, saying I sound very far away. I never had these problems on the 3g.
    Does anyone have any suggestions? This is frustrating because I am constantly in and out of my car and getting many calls from clients and staff while on the road.

    I installed IOS4.1 and the bluetooth handsfree connects about 20% of the time without having to power off the phone and turning it back on. I deleted the phone on the handsfree and re-pared the phone.
    Something is still not right with the iphone4 and bluetooth connection.

  • RAZR not recognized as "Mobile Phone"

    I have been trying to get my PBook to recognize my RAZR as a Mobile phone. First the basics - my PBook (15" Aluminum 1.25 GHz / FW 800) has built-in BT and that is working fine. I can see the device and can xfer files using the BT File Transfer util. I am setting the phone as discoverable, and the little Bluetooth icon flashes on the phone. I'm running Tiger with all updates installed - all that are available via Software Update as of today's date.
    If I use the "Any Device" option in the BT setup wizard, my phone shows up in the list and I can successfully pair with it. If instead I choose "Mobile Phone" I can't see the phone. I've tried deleting the Bluetooth preference .plist files, removing the device pairings and then re-running the wizard, but the only thing I can get to work is the "Any Device" option. After being paired, the following shows up in the BT "Device" tab in System Preferences:
    Device Name: troy's RAZR
    Device Address: 00-14-9a-dc-15-8a
    Device Type: Computer
    Device Services: , Voice Gateway, Hands-Free voice gateway, OBEX Object Push, OBEX File Transfer, Dial-up networking Gateway
    Paired: Yes
    Configured: Yes
    Favorite: Yes
    Connected: Yes
    I'm having problems getting the PBook to actually 'see' the phone as a modem (have also followed a bunch of other instructions here, including d/l-ing some of the modem scripts for the Moto phones). I can't iSync with BT, either. The RAZR is not seen by iSync.
    I'm missing some key parts of the setup that are done via the Mobile Phone setup screen, and I think that is the root of my problem. Any ideas on how to fix this? Why is the RAZR not recognized as a Mobile phone?
    Thanks!!

    I can't get my PowerBook to recognize my V3 at all. I have had complete success with my V600, but today I got a new V3, and I'd like to get my numbers from the V600 to the V3. There are too many to copy them to the SIM card (I hate the way it's all or nothing!), so I'm trying to do it with iSynch. I have managed to synch the V600 with no difficulty, but I can't even pair the V3. Is there some optimum position you need to hold the phone in relation to the PowerBook, some secret incantation or what? I tried selecting Mobile phone and Any device, but neither one works, and I've tried it on two different user accounts, so I don't think it's a preferences issue either.

  • IPhone not recognized by car HDMI cable

    I have an HDMI cable that plays my iphone in my car as well as charges it.  Ever since the upgrade to iOS 5.1  I get the message that "iPhone does not recognize this." 
    Please help I paid a lot of money and it worked fine until the upgrade.  What can I do??

    Rather than create another "iPhone not recognized by iTunes" thread, I'll add to this one. I have an iPhone 3G 8GB.
    After going through those steps you listed, my Windows XP installation always reverts back to the old Windows Apple iPhone drivers which only sees it as a camera. I've had it set to only pull from the iTunes drivers by specifying "Don't search, I will choose the driver to install" in the Hardware Update Wizard. Windows still doesn't like the iTunes drivers stating "the specified location does not contain information about your hardware". This location is the same as you noted: "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers" which contains:
    usbaapl.cat
    usbaapl.inf
    usbaapl.sys
    All dated 7/22/2008.
    My current drivers for the iPhone in my setup are still the MS drivers, version 5.1.2600.0.
    usbscan.sys
    ptpusb.dll
    ptpusd.dll
    Any help would be appreciated! Thanks!
    -Alex
    Message was edited by: Cassiux
    Message was edited by: Cassiux

  • Blue tooth  not found

    Hi
    I have looked and looked for the answer on here but can't so if I am
    Repeating sorry
    I tried to use my blue tooth but it seems  that recently it has stopped
    Working and when I go to finder it shows up but when I try to
    Connect it I am told can not connect I have  been trying to use magic mouse
    Which also stopped working Bluetooth can't find it
    Any ideas
    Thanks

    hi VIVKGP,
    Thanks for Posting!
    Please check under Control Panel and uninstall Lenovo energy Management and uninstall it,
     Now Download and install this, now Download and Install this.
    Lenovo Energy Management -WIndows 7
    caez29ww.exe
    13.6MB
    Restart after Installation
    After Installation:
    Press Fn+F5 and make sure Wifi and bluetooth are on "ON" status.
    You can also Try installing Drivers for both.
    Broadcom Bluetooth Driver
    IN3BTH50WW5.exe
    58.8 MB
    Intel Wireless WiFi Link Driver
    IN1WLN101WW5.exe
    138 MB
    and check the status again.
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My iphone shows the itunes plug in but is not recognized; cannot get phone to do anything now!

    My iphone 4 shows the itunes plug-in but is not recognized in itunes.  Now it appears locked and I can't get it to work at all. Help!

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    After the successful Restore... Sync everything back from  the computer you have regularly been Syncing and Backing up to...

  • Blue tooth not working with u connect using lastest update

    Any help ? I have a 3GS and its lastest with software. Blue tooth was working fine unlit update. No solutions with crysler as of yet for this problem.

    software is 6.1.3

  • Hard drive not recognized​, Lenovo Care button not responding

    I have a Lenovo 3000 N100 laptop.   Type 0768
    When powered up, it will not boot to the operating system.  I just have a white screen with "lenovo" and "To interrupt normal startup, press Lenovo Care button.  It will not respond to the Lenovo Care button.  Pushing F12 changes the message to "Press [F1] for SETUP, Entering boot device selection menu..." but nothing else happens.  Pressing F1 changes the message to "Please Wait...", but again, nothing ever happens. 
    I followed the troubleshooting guide which said to try reseating the hard drive, but nothing changed.
    Is it dead?

    I had the same exact problem as b4blackhad
    "I have a Lenovo 3000 N100 laptop.   Type 0768
     When powered up, it will not boot to the operating system.  I just have a white screen with "lenovo" and "To interrupt normal startup, press Lenovo Care button.  It will not respond to the Lenovo Care button.  Pushing F12 changes the message to "Press [F1] for SETUP, Entering boot device selection menu..." but nothing else happens.  Pressing F1 changes the message to "Please Wait...", but again, nothing  happens. 
    Word for Word same problem I faced.
    I turned on my laptop while continuously pressing the  "PrtSc" button upper right corner and it started up as normal!
    I am not all that PC. Smart, very average. I saw solutions saying to press F1 TO F12 tried them all and nothing worked.
     I saw "Remove hard drive" or "Replace Memory" OMG what am I gonna do now!!! Took a chance with "PrtSc" now I'm sooooooooooooo relieved, thanks Lenovo Community for all the tips that put me in the right direction : )

  • Ipad 2 blue tooth not pairing with plantronics voyager legend

    Ipad 2 is not pairing with plantronics Voyager Legend (blue thooh)  but this device (blue thooh) is pairing working good with my iphone 4s

    http://www.plantronics.com/us/support/kb/detail.jsp?vfurl=/articles/en_US/Troubl eshooting/Compatibility-statement-in-regards-to-the-Apple-iphone-5-and-the-Voyag er-Legend&retURL=%2Fapex%2FknowledgeSearch&region=us&p=&c=All&k=Voyager%2BLegend &t=All&lang=en_US&popup=false&c=All

Maybe you are looking for

  • Adobe Creative Suite 6 Master Collection English on Japanese version

    I am planning to buy Adobe Creative Suite 6 Master Collection Student/Teachers Edition off Amazon Japan. I am currently a Malaysian student studying in a college in Japan and I have tried purchasing the product off Amazon USA etc but it does not ship

  • Output Device Missing in Final Cut Pro while burning

    Our Output device in dropdown box is now missing all of a sudden. I wanted to know how to manually resolve this issue, if anyone could assist? We were burning a DVD from Final Cut Pro 10.0.09. and we got an error message: Not sure what happened durin

  • In 4.6C dump  CALL_FUNCTION_NO_RECEIVER

    Dear Experts, In SAP4.6C version CALL_FUNCTION_NO_RECEIVER ABAP runtime error.

  • Zen Micro switches itself back on - any solutions plea

    Morning All... Another question from a newbie.........please don't shout if this is on the board somewhere as I couldn't find this problem........ My Zen Micro has been perfectly well behaved for most of its life but has recently begun to switch itse

  • Default Firewall settings?

    I was fiddling around in the firewall area and I now want things back to normal. The problem is I can't remember what that is. System Preferences > Sharing > Firewall > Advanced What are the following supposed to be, checked or unchecked? Block UDP T