Blue Tooth with Sony Ericcson and iMac

I'm trying to send pictures from my Sony Ericcson to my iMac but my phone keeps saying check the other blue tooth device (iMac).
My phone is showing up on my iMac's list of blue tooth devices found and my iMac is showing up on my phone as being found as well.
However that's as far as it goes. Here is the error message that my phone keeps giving:
CHECK BLUE TOOTH SETTINGS ON OTHER DEVICE: BLUE TOOTH VISIBLE, DEVICE VISIBLE, DEVICE IN RANGE.
I'm thing the answer to each of these questions here is yes, so why won't my phone pair with my iMac?
Thanks to all,
Trey Vollmer

Hey, Elmac.
Thanks again for helping but the instructions from this here web page don't track with my mac osx system.
I wasn't able to follow along because the steps from the web page you suggested did not match my osx.
I don't know if that makes sense to you, but I hope it does.
Trey

Similar Messages

  • Pairing apple blue tooth with 2 phones.

    Pairing apple blue tooth with 2 phones? Can it be done? I have an older plantronics that works no prob. but i prefer my new apple one.

    No. By Default, the BT will be active on the Pearl instead of the iPhone. you have to deactivate the Pearl in order to use with iPhone. I own the Cingular 8125 and if I activate BT with the 8125, it will deactivate the iPhone. I don't know why, but that's what it does. Best thing is to own two bluetooth earpieces. Like, say, the Jawbone and the Apple BT. Costly, but you'll have the two best earpieces ever made and can use each on all devices.

  • HT4061 good morning! I just did a software update on my phone (finally) last night and now my phone will not come on.  All it keeps showing is the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYone please expl

    Good Morning,
    I just did a software update on my phone (finally) last night and now my phone will not come on.  It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYONE help me please???

    The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.

  • Help!  blue circle with itunes logo and picture of plug???  what is that? won't start

    just intstalled new update 8.1.3 system shut down and now will not restart.  Only give image of blue circle with music note and iTunes logo underneath with a plug leading to it?  what does that mean?

    It means something didn't go right during the update and your iPad is in Recovery mode. The same thing happened to me during the IOS 8.1 update. You need to connect it to iTunes on your computer, update it, and restore it from your iTunes or iCloud backup.  If like me you don't have a computer take your iPad to the Apple Store and they will help you with the Restore process.

  • Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands

    Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands - as I have multiple numbers for people (ie: iPhone, Work, Home), is it the BlueAnt that is having the issues or the iPhone? Tried to eliminate info on my partner's contact in with only 2 contact numbers (iPhone, Home) and one or the other is totally screwing up. Seems, from BlueAnt website, that it would be the iPhone contacts...and the guessing begins?!! Anyone else have similar issues when BlueAnt S4 was paired and giving 'Phone Commands'?? Any suggestions would be beneficial as I've spent way too much time on the web looking for a good fix/answer. Thanks.

    On your new phone: Settings>General>Reset>Erase All Content & Settings. Start over, this time using your new ID.

  • Blue screen with flashing folder and question mark on startup

    Hello.
    I need help with my Macbook Pro.  I get a blue screen with a flashing folder and a question mark at start up.  To date I have tried the following:
    Apple Hardware (Extensive) Test (Results:  "No Trouble Found")
    Safe Boot
    Reset NVRAM
    Reinstall OS X via the internet (I received no discs when I purchased it).  I select the StartUp Disk to reinstall. When reinstalling via the internet I get to a point of reinstalling Mountain Lion but it asks me to choose a drive - yet there are no drive options to choose from. Then a window comes up asking me to "Select the system you want to use to start up your computer" but no options appear.  When I choose "Restart" a note pops up saying "You can't change the startup disk to the selected disk.  Startup Disk could not gather enough information on the selected disk."
    The only option is "Restart" from the Apple menu.  When I choose that it goes back to the original "Blue screen with flashing folder and question mark on startup."
    I have no Time Machine
    I can't access the disc utility.
    Are there any ideas as to what might be the problem?

    Your hard drive has likely failed and needs replaced. That would explain why the system does not display it when you attempt to reinstall the OS via Internet Recovery.

  • Using HD 1080i60 shot with sony z1 and 24p shot with canon in a sequence.

    is it possible to use two different kind of footage( one is HD 1080i60 shot with sony z1 and the other one is HD 24p shot with canon) in a sequence? if not what should I do?

    Yes, it's possible. Make your sequence with the settings of the material you shot more of, and the other one will be rendered to those settings when you bring it in.
    For a more consistent look between the two, you may want to look into this:
    http://www.nattress.com/Products/standardsconversion/standardsconversion.htm

  • HT201205 no sound after using blue tooth with iphone 5

    I have just purchased a 2014 Durango and the Blue Tooth works fine with my Iphone 5.  However, after i leave the vehicle, i have no sound on my phone.  Have tried to restart, turned the blue tooth off, tried playing both a song and a movie to no avail.  Any suggestions?

    It sounds like it is still connected.
    Try disconnecting it here:
    Settings > Bluetooth > Select the Durango and disconnect.
    If that does not work:
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

  • Is N95 compatiable with Sony Ericcson Car-Kit HCB-...

    Please could anybody confirm whether they have any experience of using the new N95 hand-set with the sony ericcson in-car handsfree HCB -30 bluetooth kit. I have just purchased the N95 and have mixed results with the SE kit and have had conflicting views from Nokia, SE and installers
    Thank you

    I have no idea about the Sony car kit, but would warn you that it is not properly compatible with the recommended Nokia kit which is the CK-20W....so you should think hard before using this as a solution if the Sony kit does not work. My problems are mainly around voice dialling with the car kit - it didn't work at all with FW 10 or 11, worked after a fashion with 12, have just installed 20 and now it does not work at all again. CarphoneWarehouse are currently trying to downgrade the firmware back to 12, but I have no confidence that they'll do it. The really annoying thing is that there seems to be no documentation about what each new FW version introduces, and no way of getting a human being at either Nokia or CarphoneWarehouse to really take responsibility and give me the confidence that Nokia are even trying to fix the problem.

  • Charging my blue tooth with the car charger?

    I have a blue tooth that I keep in the car and I also bought a car charger.
    Unfortunately, I can't recharge my bluetooth in the car.
    Does anyone know of an attachment that will make it possible for me charge it.
    Thanks
    Maggie

    Since the BT headset comes with the dual charge cable, try this:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=4FC F984E&fnode=home/shopiphone/iphoneaccessories&nplm=TN787LL/A
    Its a USB cigarette lighter adapter. Just plug your dual cable into it and you're go to go.
    BTW, it is compatible with the iPhone so it meets the correct power standards.

  • Problems with Sony NX3 AND Sony Z5 avi files

    Very, very strange problem. I will try to give as much detail as possible so bear with me.
    I currently edit with two different computers. One uses Premier 3 the other uses Premiere 6. I shoot with several different cameras, but for purposes of this discussion I will talk only about the Sony Z5 and the Sony NX3. I capture my footage on a CF card (Z5) or SD card (NX3)
    All HD footage shoot with the Z5 and/or the NX 3 works fine on either system. However any SD footage that is over a certain length will not import into premiere 6 (if it's from the Z5) or the length of the footage will only be 2:37 (on footage from the NX3). However the SD footage from either camera will play perfectly on the system with Premiere 3.
    Any ideas on what my problem with premiere 6 is?

    I caputured footage from my ZU1 yesterday that encountered time code breaks. They should not have been there. My only thought is that the breaks occured when I shut the camera down and started recording later.
    Maybe... I assumed it was user error... I was wondering if perhaps a setting in the camera was causing the breaks when the camera powers down.

  • Ideal network to share 2TB iTunes library with mac mini and iMacs by wifi?

    Greetings,
    Just made the move from pc to apple world. First time poster. Please feel free to suggest if this topic is better suited in another area.
    I am looking for an ideal means of sharing my music library (+/- 1.5TB size) from my mac mini with my 2 kids iMacs.
    The mac mini has an internal 80GB SSD and 4 GB RAM. It connects via ethernet to my Netgear WNDR 3700 wifi a/b/n router which connects to a Docsis 3 modem. Speed and signal strength is great.
    My music library is currently backed up on a Seagate USB desktop HDD. My interim plan is to use USB to connect it to the mini. Long term plan is to migrate to a NAS system.
    The kids iMacs (1x 2006 model with core duo and 1 x 20008 with core 2 duo) both run snow leopard 10.6.3 and access wifi signals for internet. Wifi signals ~16-20 Mbps strength.
    Is there prefered method to share the music library with the kids by wifi? Only one way? do I need to add airport devices, or? It would be extremely difficult to provide ethernet to their rooms.
    Thanks
    Kenreau

    kenreau wrote:
    It would be extremely difficult to provide ethernet to their rooms.
    have you consider *powerline adapters* _*such as these*_
    here's an interesting read on the subject.
    JGG

  • Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

    I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP:  c000021a {Fatal System Error}.
                                                                The verification of a KnownDLL failed.  system process terminated unexpectedly with
                                                                 a status of 0x0000221  (0x007fb9c0  0x00000000).
                                                                 The system has been shut down.
    I do not have recovery disks for this computer.  I tried to order them but them seem to not be available.  This is my daughter's computer.  She says she started to have trouble after downloading Frost Wire (music share) and then she removed it.  We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
    This question was solved.
    View Solution.

    Hi,
    Assuming your in the US, recovery discs are available to order for that model here.  That may be the best option.
    You should also be able to do a recovery without the discs as well.  Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible.  This should allow you to recover the PC.
    R
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • HP Pavilion dv9218tx Notebook PC and HDMI audio problem with Sony TV and Windows 7

    Sound does not come through with the HDMI connection and, on investigation, there is no HDMI audio driver/option.
    Noting that there seemed to be an issue with windows 7 and HDMI audio which is addressed by updating the BIOS and the connexant sound driver I have done so to no effect.
    The Sony TV is recognised as a standard monitor in the devices for graphics but not for audio
    Suggestions as to why HDMI does not appear - including as a disabled service - and what to do t get is available?

    Hello everyone,
    Thanks for posting on the HP Forums!
    I will definitely assist you with lack of sound issues. Before anything else is done, please make sure you try every step in this thread: Troublesho​oting Guide: Audio does not Work after a Certain Period of Time
    If every step does not help, please provide the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    5. What steps have been attempted from my first post on this thread, and what were the results?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Either way, let me know what happens. Thanks!
    Mario
    I worked on behalf of HP.

  • Can't Delete to Trash with LR5.6 and iMac 10.9.5

    I have used LR since version 1.  My main catalog is still LR 4.4 but I have downloaded the 5.6 CC trial with a view to updating but have run into a problem.   If I try to delete a photo from within a LR 5.6 catalog by pressing the delete key and clicking on "move to trash" an error message comes up saying that the volume does not support Trash.  It does offer the option to permanently delete the photo which works OK.
    Alll photos and the catalog are stored on an external disk connected to the iMac via Firewire 800.  That disk is not networked and not shared with any other computer.  It is formatted as Mac Extended Journaled.  The permissions for that disk are all Read/Write (the problem persists whether or not the "ignore ownership" checkbox is checked or unchecked).  I have repaired the disk using Disk Utility and repaired Disk Permissions on the startup disk, I have also experimented with moving the LR catalog to the startup disk.  None of this helps - I still cannot move a photo from my catalog to the Trash but I can permanently delete it.
    I have had no problems with this disk and can move photos to the trash from my LR 4.4 catalog and every other program and from the OS.
    Can anyone shed any light on this?

    Hello
    I've tried this, along with numerous other fixes on the forums and nothing seems to help. Running the latest version of LR (5.7) and Yosemite.  It was not an issue before I upgraded to Yosemite though. I deleted files regularly using the typical tools/commands in LR with no problem at all.  Most of the fixes have focused on problems with external hard drives but the files I am trying to delete are all on my hard drive. I also checked to be sure permissions were Read & Write on the main Adobe folder as well as the Lightroom folder in the finder.

Maybe you are looking for