Blue vertical streak on papers hp color laserjet cm1015 mfp

Recently my printer has printed 2 blue vertical streaks on documents I print. I checked the supply levels and there is still about 45% of the ink left for all the toner colors. I tried using the cleaning mode, but it didn't help the problem. If somebody could help me with my problem it would be greatly appreciated. Thank you!

Nobody has experianced this?

Similar Messages

HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine.

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine. I have tried several calibrations with no change. I have reset printer to factory default with no success.

Hi AFace; hope you are doing well and sorry to hear that you are having this issue.
Your HP Color Laserjet CM1015 MFP is a commercial product. I will suggest posting and looking in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Color LaserJet CM1015 mfp photo printing problem

I am running a Color LaserJet CM1015 mfp utilizing only HP print cartridges and HP Color Laser Photo Paper, glossy, yet I cannot seem to get a decent photo to print. There is always a black smear or two on the front of the printed page. It prints black and white and color just fine on plain paper but I cannot get a decent print on glossy. This has happened since day one so I don't think it's a dirty print roller,,etc. issue.
Thanks for any ideas!
Michael

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Insanity when printing on HP Color Laserjet CM1015 MFP

I've bought the Hewlett-Packard Laserjet 1015 a couple of days ago. When printed from the Acrobat Reader 8.1.2, some documents are printed with some criptical fonts instead of letters( totally unreadable ). "Print As Image" from Advanced Settings works, but is not a real option for me. The same files were printed without any problems on my old HP ColorJet 815. Has anybody encountered this problem already?

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Color LaserJet CM1015 MFP Working?

Does anyone have the cm1015 mfp working with leopard?? Does scanning work correctly with HP Director? I wonder why none of these new printers work with 10.3 but not 10.5. Thanks

Hi there
I found a new version of the HP printer software package for cm1015/1017 printers on the HP website. Installing at this moment.
I'm looking forward that this will work on leopard ("system requirements: osX 10.5")!
Happy testing.
link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=1846081&prodTypeId=18972&prodSeriesId=1846080&swLang=18&taskId=135&s wEnvOID=219
scroll down and choose the bundle released at 14 january.

Vertical streaks and bad skin color

The print is not very clear....it has vertical streaks and the skin color is mostly red.
Thanks for your help!

Hello Plumita
could you please check the printer imaging drum.
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...

Can't install HP Color LaserJet CM1312nfi MFP at notebook HP Pavilion

I bought new notebook HP Pavilion 13-a051sr with Windows 8.1 (x64) onboard.
I'm trying to install HP Scan.
While installing all-in-one HP Color LaserJet CM1312nfi MFP using "CM1312series-win7-full-solution-AM-EMEA1-v5.1.exe" can not get after the dialog window "Locating the printer". Printer could not be found even if I write down printer' IP-address. The latest printer firmware is already installed. Firewall is disabled, antivirus is closed.
I installed printer without any problems using it IP-address. What can I do in order to install scanner module?

HP Print Drivers

Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

I recently upgraded to Mountain Lion, and found that I could no longer print to my HP CM1312nfi.
This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
When I try to download the driver by bonjour or IP, I get the following error message:
Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
Is this truly a Software Update server error, and if so, any clue when it will be resolved?
I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog lists no devices.
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
Thanks for your time and attention.

Of course, once I posted this, I tried again and downloaded the driver without issue.
My second question still stands, however:
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP Color LaserJet Pro MFP M177fw - PostScript support?

Hi,
I'm looking to purchase a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I'm deciding between the following models:
HP LaserJet Pro 100 color MFP M175nw
HP Color LaserJet Pro MFP M177fw
PostScript support is important for me, and I know that the 175 has this. However, I'm not sure about the 177, even after digging through several web pages and documents. Here's what I found:
- The main specs page for the 177 says that it supports "PCLm". I'm not familiar with this PCL variant, so I don't know how it compares to PCL5 or PCL6, etc. I was unable to find more information on "PCLm".
- The "Software Included" section of Page 2 of the PDF datasheet for the 177 mentions "HP PostScript" driver. This is the only place where I've seen any potential indication that the 177 supports PostScript. This section also mentions a "PCLmS" driver. I could not find any further information on "PCLmS".
- The for User Guide the 177 only mentions PostScript in a section that refers to ePrint. However, it does not imply that the 177 itself supports PostScript.
- The Product Specifications page (in the Support section of the HP site) for the 177 has a "Printing Specifications" section which lists only "PCL3 GUI" next to "Device languages".
I'm guessing that the 177 does not support PostScript, but does anyone have any more definitive information? Also, is there a description of PCLm / PCLmS somewhere?
Thanks!
This question was solved.
View Solution.

Hi Clent
Here is some information on both printers.
Here is a url for the printer specifications for the Color LaserJet Pro MFP M177fw
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03901180&tmp_task=prodinfoCategory&cc=us&dlc=en...
Data Sheet also.
http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
Fonts and typefaces Depend on Operating System fonts and typefaces.
Print languages
PCLm
Laserjet Pro 100 color MFP M175nw
http://www.shopping.hp.com/shopping/pdf/ce866a.pdf
Print languages
HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), AirPrint™ compatible
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw fax to pc

I have just bought this printer and want to msend faxes to my pc. I was told by PC world that it had this function. So far I cant find it can anyone help. Many thanks

Hi ,  I would be happy to help shed some light on the issue your are having with trying to setup this Color LaserJet Pro MFP M177fw to receive your faxes on your PC.  I have looked into this further for you, and I'm pretty sure this model doesn't support receiving faxes on your PC. You can double check to make sure I haven't missed it in the COLOR LASERJET PRO MFP M177 User Guide.
I did however locate a different model, where in the manual does provide instructions on how to set this feature up but it is a black only printer. Its the LaserJet Pro MFP M225dw (again black only, no colour.)
Step 5 (Optional): Configure settings for receiving digital faxes (Windows) The product can save incoming digital faxes to a computer folder. Use the HP Digital Fax Setup Wizard to configure the settings. This feature is available only for Windows. 1. Click Start, and then click Programs. 2. Click HP, click the name of the product, and then click Digital Fax Setup Wizard. 3. Follow the on-screen instructions to configure the settings.  HP also has this feature available on it's HP Officejet Pro 8610/8620/8630 e-All-in-One Printers, which are Colour Inkjets. Some of the commerical products also support this feature but I'm unsure of which ones. I would really suggest contacting HP Shopping for more information on these models.  Hopefully this has answered your questions, and please let me know if there is anything else I can do to help.   Thanks,

Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

Hi there,
I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up? Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
Any ideas? Any help would be greatly appreciated
thanks!
Simon

Hello @Simonjayh,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
Step 1: Uninstall Drivers:
First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Color LaserJet Pro MFP M177fw don't go to sleep mode

Hi and sorry for my english In settings of HP Color LaserJet Pro MFP M177fw I tryed 15 and 5 minutes before sleep mode. After 15 or 5 minutes printer going to sleep, but if I'm used printer even only one time, after that he don't sleep ( printer's screen not dim), not after 5 and 15 minutes. Printer is connected through wi-fi, Windows 8.1 x64. Any ideas?)

Hi Denis88,
I see by your post that the printer isn't going into sleep mode.
I can help you with this issue.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
I would update the printer's firmware if the printer won't go into sleep mode.
HP Color LaserJet Pro MFP M177fw Drivers.
Select your operating system, click next, click the link for firmware.
I have provided some information from the manual for the sleep mode that you can check out.
COLOR LASERJET PRO MFP.
EcoSMART Console: Change the default times for entering Sleep mode or Auto Power
Down mode. Configure which events cause the product to wake.
Printer Settings Auto-off Configure the product to automatically turn off after a period of
inactivity. You can adjust the number of minutes after which the product turns off.
Touchscreen control panel:
1. From the Home screen on the product control panel, touch the Setup button.
2. Open the following menus:
System Setup
Energy Settings
Sleep/Auto Off After
3. Select the time for the Sleep/Auto Off delay.
NOTE: The default value is 15 Minutes.
4. The product automatically wakes when it receives jobs or when you touch the screen on the product
control panel.
You can change which events cause the product to wake. Open the following menus:
System Setup
Energy Settings
Wake/Auto On Events
To turn off a wake event, select the event, and then select the No option.
Hope this helps resolve your issue.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw How to Scan

I just bout the HP Color LaserJet Pro MFP M177fw printer today and don't know how to use the scanner. I use Windows 8 operating system. Please advise how to use th scanner function. Thanks.

Hi, From page #38 of the manual: Scan by using the HP Scan software (Windows)
Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned image as a file or send it to another software application.
1. Load the document on the scanner glass according to the indicators on the product.
NOTE: For best results, load small-size paper (Letter, A4, or smaller) with the long edge of the paper along the left side of the scanner glass.
2. Click Start, and then click Programs (or All Programs in Windows XP).
3. Click HP, and then select your product.
4. Click HP Scan, select a scanning shortcut, and then adjust the settings if necessary.
5. Click Scan.
NOTE: Click Advanced Settings to gain access to more options.
Click Create New Shortcut to create a customized set of settings and save it in the list of shortcuts. Regards.

Blue vertical streak on papers hp color laserjet cm1015 mfp

Similar Messages

Maybe you are looking for