Blue waves not appearing in Precision Editor

When I click the blue audio icon in Precision Editor, the blue waves do not appear
above and below the clip filmstrip. What do I do? Why are they not appearing?
debcoo
thx

The precision editor includes video and its associated audio, additional audio tracks such as from itunes are treated as extras and therefore don't display their waveform, which can otherwise be seen by selecting the audio track and using clip trimmer. Sorry i didn't fully understand your question to begin with.

Similar Messages

  • Labview vi controls not appearing during Teststand Editor run time

    Hi,
    I'm running established sequences (TS3.5) and vi's (LV8.2) in Teststand 4.2 and Labview 2009.
    During sequence execution in the Editor environment, vi's are called which display simple yes/no
    user controls. 
    I am finding that when the Labview step is called the controls are only appearing briefly, if at all.
    The execution appears to have entered Labview waiting for a control to be operated, but
    the only way forward seems to be termination of the sequence.
    On termination, the controls immediately appear allowing selection, but on doing so the sequence
    does terminate normally.
    There are 2 vi's, the 1st is called early and has only shown this problem rarely,
    but the 2nd called later in the sequence always displays this problem. 
    Another vi which displays a progress bar, executes in a separate thread without problems. 
    We also notice that the additional task on the task bar does not appear as normal when
    the vi's are called.
    Any ideas why the controls are not displayed until sequence termination, please ?
    thanks,
    Gary. 

    Make sure you are checking the "Show Front Panel" checkbox on the Module specification panel. Not having that checked is the most likely explanation.
    Hope this helps,
    -Doug

  • Motion 3: Animated parameter does not appear in Keyframe editor

    Hello World
    I buyed the FCS2 update a few monts ago and now want to make a very simple animation in Motion 3 - but it seems to be not possible!
    - I create a new text
    - I place the playhead at frame 0
    - I set the tracking parameter (I don't know if it's the right word in english, I mean the space between the characters) to 0, where it already has been
    - I go to the information window and add a keyframe to the tracking
    - Now I place the playhead at frame 26
    - Now I set the tracking to 10
    - I add a keyframe as I did before
    When I now play the sequence, the text becomes wider and wider - as I want! BUT: The animated Parameter (in german Motion calles 'Stil.Laufweite', maybe 'Style.Tracking' in English) will not show up in the keyframe editor. If I go to 'All' in the keyframe editor, I can see the animated Style.Tracking. But if I go to 'Animated', It will not show up.
    If I proceed the same way with the transpacency or something like that, the parameter will be shown up in the keyframe editor.
    I hope someone can help me but I think it's a bug!
    Best regards
    Remo

    Welcome to the discussions - have you upgraded to 3.0.1? That fixed a lot of little bugs.
    Patrick

  • Cross Reference Sources appearing in Story Editor view but not appearing in the Cross Ref pane

    I have imported a Word document containing working cross references into an InDesign document. The vast majority of these cross references import correctly and link to their destinations within the document, however there are some that are not working. If I view the text frame in the story editor view, I can see these "broken" cross reference sources that came in from the Word doc but on selecting them I can see that there isnt a corresponding entry for it in the cross reference pane. As said, there are only a few that are behaving like this.
    What could be causing these not to appear in the cross reference pane?
    Obviously as they are not appearing in the list of cross references I can't update them, and also, as they are technically broken cross references, because a source exists for them but there is no corresponding entry in the pane, then on export to epub, InDesign crashes (If there is one broken cross reference in a document, export to Epub will crash indesign).
    Also, to clarify, in the Word doc if I navigate to a cross reference that is failing once in InDesign, I can update it properly, and also navigate to its destination in the Word doc, so it's not as though these cross references are broken before coming into InDesign. Also I believe the destinations for these "broken" cross references are coming across properly to indesign too as I can see them in the story editor view.
    Supposed Cross Reference source selected in Story Editor view on left, but no corresponding cross reference highlighted in pane on right:
    Technical Details:
    InDesign CS5.5 - Version 7.5.3
    Microsoft Word 2010, File type .docx

    I have found the possible cause of this problem!
    If a table is used within the Word document somewhere between where the cross reference source is and its destination then that particular cross reference will be broken as described above in my initial post.
    So the "fix" is to remove any occurances of a table in the Word document and the cross references come into InDesign perfectly. This is actually not a fix at all. I need to use tables in the Word document for layout purposes so if they break cross references if they stand between them and their destinations then I have to compromise, i.e. use tables but with no cross references in the document or vice versa.
    I found a similar issue recently with index markers in Word causing a shift on the cross reference tags when bought into InDesign. The "fix" again for that was to remove all index markers from the Word document. See post about this here: http://forums.adobe.com/thread/1043981
    InDesign really needs to sort out the issues with importing of Word documents with cross references in them. If I can't use index markers and tables in a Word document without breaking its cross references then they can't claim to have the ability to import a Word document while maintaining its cross references into an InDesign document. It just doesnt work as ive painstakingly proven.

  • When an image is inserted here using clipboard, it appears in the editor, but it does not appear in

    when an image is inserted here in forum po editor using clipboard, it appears in the editor, but it does not appear in the post. When the image is inserted from a file, it works

    Im not completely sure, why you are pointing out the very same thing I'm pointing out too. If you re-read my original post thoroughly, you will find - at its very end - the sentence "When the image is inserted from a file, it works". Since I'm not aware of the way how to insert the image from a file in a procedure other, then clicking the "camera" icon, I hold such a sentence for more then enough to point out, that the camera icon works fine for me (if you re-read my post thoroughly and pay detailed attention of my expression "using clipboard", then you shall definitely evaluate this expression as covering both ways an image can reach the cliboard, eg. Copying from a graphical editor/processor or dragging&dropping a graphical file).
    However more then this, your post does in fact NOT reply to the fact, why the WYSIWYG editor box allows the insertion of an image from clipboard, but then fails to upload it and thus it is not displayed in the post.
    For the sake of completness, I must also point out, that your last sentence of your post "And that's what it is there for" does not bring much clarity about that thing - while I fully understand, as one can observe from my "When the image...it works" sentence, the functionality, purpose and propper handling of the "camera" icon, I cannot agree with such a behaviour of the editor, that allows an operation to be done (What You See) that does not affect the outcoming result (Is What You Get).
    From the theory of designing (G)UIs one may learn, that in such a case the operation should either fulfill completly (eg. display the clipboard-inserted image in the resulting post) or fail completly in the beginning (when Pasting the image into the text), either silently (just not displaying the image in the editor field) or with an error warning such as "Insertion of images/bitmaps from clipboard is not permitted". For Windows-like environments (such as, but not limited to, Microsoft Explorer, KDE, Gnome, IceWm....) the change of the dragging cursor to display a kind of "No way" or "no entry" pictogram, is also advisable.
    For the sake of completness of my reaction I also might percieve your last sentence as a kind of irony or sarcasm, which however I definitely do not find appropriate behaviour, more over I might call it an "arogant rudeness" in case of such a "VIP" member with more then 9000 posts in the time when this post is being written, with a hint of overworking, malicous intends, inattention, ego-centricism or any other personal failure(s) or a combination of them, that you should - in case they are present - definitely pay attention to in your private life.
    Moreover, let me please point out, that Im not much pleased about the way this forum works with its users, since I find the bug I have discovered, only a small one (a category B one might say in the A-B-C scheme, eg. a category, that does not directly influence or prohibit the execution of the main business cases, however it may result in discomfort, data loss or operation repetition, such a category would be most possibly a category C in the A-B-C-D scheme). Therefore I must explicitly express my annoyance that you have the guts to handle the post I did like this, when - in my opinion - the post has been written in such a manner that it was merly a polite point out of a small bug, thus it was kept as brief as possible, but fully covering the description of the scenario, alternate scenarios and their outcomes. Moreover, I'm definitely displeased, that you allow yourself to post such a post, that - instead of exploring the matter - throws the whole matter on the head and inside-out, or, one may say, kicks the bucket, and forces the original author, in this case me, for re-accounting for himself, moreover the ambivalency of your post opens such many possibilities to account for, that the time and resources the self-accounting autor has to spent, heavily overweighting the importance, significance and impact of the bug itslef.
    So let me please advise you for the next time:
    - to explore posts with more thoroughness, evaluating their expressions and sentences much more deeply, rather then just glance through on their surface
    - think twice before answering and try to figure out how such answer might be percieved
    - try to do less posts, but with higher quality
    - try to employ more politeness and correct behaviour
    - approach the matter with more humble and curious attitude rather then with a "I-know-everyting-better" standpoint
    With regards
    Lukas Plachy
    Misstypes corrected by rheingold.

  • How get rid of blue bar in precision editor?

    Hi, I'm trying to do an edit in the precision editor between two audio clips, but there's a portion of each which has a blue bar on the bottom, and that part is silent. What does the blue bar mean and how can I get rid of it so I can use those portions of my audio clips? Here's what it looks like:
    Thanks,
    Tony

    Image didn't come through on original post, here it is:

  • Premier elements 11 (trial) tries to run but video editor does not appear

    I've installed trial version of Premier elements 11 OK and Icon appears on desktop. When I try to run it, I can see from my screen that it tries to load and initialise but the video editor does not appear. Any ideas? I'm running Windows 7 Home Premium. I can see the .exe appear in the task manager process list and then disappears after 10 or so seconds.

    Provide exact system info and crash details:
    Working with your Operating System’s Tools
    On a hunch I would say you face the good old "I need to update my graphics driver/ get a better graphics card" thing...
    Mylenium

  • My back button does not work because the prior screen does not appear in the history.  I therefore must go back to the blue screen and reload safari.  Apple tech support could not help.  Can anyone else help?

    After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History.  Apple tech support was not able to fix the problem.  Does anyone have any suggestions?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • Precision editor's main rolling edit bar not responding

    I've been using FCP X for a few days without hiccups.  Earlier today, the precision editor's central rolling edit bar (button w/ 3 vertical hashmarks) just...stopped working.  It's like it's disabled.  Everything else in the precision editor works as it did before.  I've restarted program, computer (2010 macbook pro 15in i5), and no response from the edit bar.  As if some preference has been turned off. Any help with this? I can't imagine it's simply broken.

    Do both of the shots have media available beyond the edit points to allow you to roll the edit? Could you post a screenshot of the precision editor and perhaps tell us a bit of what you're doing?

  • Precision Editor

    I'm having a baffling time trying to simply accomplish what I thought would be no problem.
    I want to scrub out some audio from a clip. I am trying to do this with the precision editor set to audio.
    I realize that you need to have two clips to work with. So I split one clip into two pieces. I click on the second clip and open up the precision editor and toggle on the audio icon.
    That drops down the two clips with the blue audio tracks one over the other.
    Now I am at a loss as to which area I drag in which direction in order to remove some audio from my clip. I do not want to 'join' any audio I just want there to be a dead zone on the track with no audio and then have the audio resume.
    Maybe I should not be using the precision editor to do this but I know it can be done this way....I just can't figure it out.
    Actually I did accomplish this once but forgot how I did it. However the area of audio that was scrubbed just inserted itself and the original track was still there and the playhead just went back and included the part scrubbed out.
    Now that I have throughly confused you I realize that it may not be easy to explain this to me without actually sitting with me and walking me through it.
    I would love some input.
    Dan

    SillTry'n wrote:
    .. Could you explain to a newbie just what you mean by this ..
    no, no, that is a yet-non-existing feature!
    just an idea from my weird mind..
    iM allows to set markers .. chapter markers and 'commentary'..
    in a future version of iM, why not using such a marker to mark a part of a clip, to lower volume, for example.. ?
    not yet existing..
    I wrote Apple a mail..
    feature of iMovie12 ..

  • BPM Application Link does not appear in BPM Workspace (11.1.1.7)

    I spent huge amount of time to reveal why does that happens.
    All that follows further is valid for BPM Suite 11.1.1.7.
    The scenario.
    You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
    But the application link did not appear in BPM Workspace.
    Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
    At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
    The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
    Else the Appication Link will not appear.
    One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
    The second find is a bug (is think so).
    If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
    If you look to organization.xml you will see something like this:
            <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
                <ns5:name>StartTask.InitRole1</ns5:name>
                <ns1:processRole id="InitRole" name="InitRole1"/>
            </ns1:applicationRole>
    The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
    When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
    After that "applicationRole id" != "applicationRole name" and the Link does not appear.
    How to fix?
    Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
    That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
    Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
    In that case the associated swimlane will have the same name as the "applicationRole id".
    Hope this helps somebody
    Oleg

    Flash Player is a browser add-on, not an executable program.
    If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you will need to make the file association manually.

  • Tab Strips are not appearing correctly

    Hi all,
    We are using SAP Portal 7.3 and we are using Custom theme. The tabstrips are not appearing properly (half broken).
    I have tried changing the properties "Background color of selected tab" , "Background color of non-selected tab" and others in theme editor but this is not solving my issue.
    Any help would be highly appreciated.
    Thanks
    Harshmeet

    Hey,
    Thanks for the reply. PFA the screen shot
    This is how it is appearing, somewhat broken and some space below the tabs.
    Thanks
    Harshmeet

  • Why do my 3rd party loops not appear in the "Loop" tab?

    I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing.
    Does anybody know the cure for this?

    If you drag your .wav loops into the arrange area do they function properly?  If not, you may need to convert them using Apple Loops Utility.  After doing that you can drag the folder with the .aiff conversions onto your loops tab to import them.
    You might find this old thread useful:
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=37200

  • HT201240 This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I

    This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I created.  I am logged in as myself and it states that I am an "Admin".  The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users. 
    Can someone help me?  I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on?  What if this were my child?  This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
    Any help would be appreciated.  (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
    Thanks.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • Spry menu bar does not appear over flash elements in I.E. 8

    Hi, My spry menu bar does not appear over any flash elements in I.E. 8. Every other browser it workd fine. Can anyone please help? Thanks
    A link to one of the pages is http://www.innervisionfilms.tv/pages/showreel.html
    My spry code is
    @charset "UTF-8";
    /* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
    /* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
    LAYOUT INFORMATION: describes box model, positioning, z-order
    /* The outermost container of the Menu Bar, an auto width box with no margin or padding */
    ul.MenuBarHorizontal
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: 100%;
        cursor: default;
        width: auto;
        font-family: Verdana;
        color: #000033;
        font-weight: bold;
    /* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
    ul.MenuBarActive
        z-index: 1000;
    /* Menu item containers, position children relative to this container and are a fixed width */
    ul.MenuBarHorizontal li
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: 100%;
        position: relative;
        text-align: left;
        cursor: pointer;
        width: 130px;
        float: left;
    /* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
    ul.MenuBarHorizontal ul
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: 100%;
        z-index: 1020;
        cursor: default;
        width: 8.2em;
        position: absolute;
        left: -1000em;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
        left: auto;
    /* Menu item containers are same fixed width as parent */
    ul.MenuBarHorizontal ul li
        width: 8.2em;
    ul.MenuBarHorizontal ul li a
        width: 10.2em;
        background-color: #4E81B4;
        left: auto;
        background-image: none;
    /* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
    ul.MenuBarHorizontal ul ul
        position: absolute;
        margin: -5% 0 0 95%;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
        left: auto;
        top: 0;
    DESIGN INFORMATION: describes color scheme, borders, fonts
    /* Submenu containers have borders on all sides */
    ul.MenuBarHorizontal ul
        border-top-width: 0px;
        border-right-width: 0px;
        border-bottom-width: 0px;
        border-left-width: 0px;
        border-top-style: solid;
        border-right-style: none;
        border-bottom-style: none;
        border-left-style: none;
        border-top-color: #FFFFFF;
        border-right-color: #FFFFFF;
        border-bottom-color: #FFFFFF;
        border-left-color: #FFFFFF;
    /* Menu items are a light gray block with padding and no text decoration */
    ul.MenuBarHorizontal a
        display: block;
        cursor: pointer;
        background-color: #EEE;
        padding: 0.5em 0.75em;
        color: #000033;
        text-decoration: none;
        font-family: Verdana;
        font-size: 11px;
        background-image: url(../pagelayout/menubg.jpg);
        font-weight: bold;
        border: 1px solid #003366;
    /* Menu items that have mouse over or focus have a blue background and white text */
    ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
        background-color: #003366;
        color: #FFFFFF;
    /* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
    ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
        background-color: #003366;
        color: #FFFFFF;
    SUBMENU INDICATION: styles if there is a submenu under a given menu item
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenu
        background-image: url(../pagelayout/menubg.jpg);
        background-repeat: repeat;
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
        background-image: url(../homepagelayout/greenbarbg.jpg);
        background-position: 95% 50%;
        background-repeat: repeat;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
        background-image: url(SpryMenuBarDownHover.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
        background-image: url(SpryMenuBarRightHover.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
        position: absolute;
        z-index: 1010;
        filter:alpha(opacity:0.1);
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
        ul.MenuBarHorizontal li.MenuBarItemIE
            display: inline;
            f\loat: left;
            background: #FFF;

    I still can't find a solution. Changing the parameter wmode:transparent works for .swf files but .flv files do not have the option to add this parameter. If you add it in the script manually it doesn't do anything. Any help would be greatly appreciated. I cn't find any solution online.
    Thanks,
    Adam

Maybe you are looking for