Blue White Screen Appeared While Switching Account
I was trying to go to another account then all of a sudden the whole screen went bright and blue. Does anyone know how to fix that?
I've checked the Display option in Universal Access; it's on Black on White and Enhance Contrast is set to Normal.
Thanks in advance.
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
Cheers! DALE
Similar Messages
-
White screen appears while downloadaing data
Hi,
Whenever I try to download the data a white screen appears before the pop up of download data. My users dont want to see the white screen before downloading any thing. Please help meInteresting question. In my environment, I can replicate the blank popup window in IE, but not FF. But it closes automatically as soon as you hit Open or Save. I'd be curious as to what the business need is for trying to eliminate this behavior.
-
White box appears while switching between two desktops
Hello all,
Since few weeks I have a problem when I switch between two Desktops. Everytime I switch between them a white box appears in the left corner of my screen (see screenshot).Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Blank White screen appears while returning from server page to website page.
I am trying to run my website as hosted webapp on Intext Cloud FX. The scenario I am facing is this
1. I submit to payment page calling server servlet https://abc.com/payment.
2. Server responds with an intermediate page (form with hidden fields), with a form in it submitting parameters to my website url
(http://a.com/checkout/paySuccess.mobile).
My app is struck in second step when server responds with intermediate page and it shows blank white screen.
Any help in this regard will be helpful.
RegardsGot the solution. Problem was that I was trying to submit form from encrypted (https) page to unencrypted page(http). On firefox browser we get an alert message regarding this but on hosted app, no such message is appearing and only white screen is coming. When sumbitted to encrypted (https) page all worked fine.
-
White screen appears while watching videos on full screen
Hi,
I was wondering if you could help me. Last few days, while I'm watching videos on Safari (youtube for example) every couple of minutes a white screen pops up instead of the video.
This happens on full screen only. when I minimize the window, everything seems to be normal.
are you familiar with this phenomenon?
THX.I don't really know if this falls under this category but...
I usually watch movies/shows on full screen on my mac book pro 13" buuut in the past few days when I set it to full screen it'll get most of the screen but it won't cover the toolbar.. it really is bugging me and I dont know how I can fix it? -
While trying to opening Video link in IE6 browser a white screen appears and the screen hangs.
Added a video as an internal link to a news article.
The flash player version we are using is 7.0.0.0. This video opens fine in all the browsers except for IE6 browser.
While trying to opening this link in IE6 browser a white screen appears and the screen hangs.
Please find the link below :
http://www.abnamroprivatebanking.com/global#global/au-news/global/14241
When we try to open any videos in the above link using IE6 browser white screen appears.
Could you please provide a solution as what can be done to resolve this issue.if you're using an flvplayback component, you need to use fp 8 or better. or, use the netstream class with fp 7.
-
White screen appears when using AS3 wrapper file with Captivate 7
We had no problems with this in the past but now a white screen appears instead of the captivate running. The file is used when we use Captivate, streaming video, or HTML assessment. It triggers a complete signal to our LMS at the end. Is there anything that we are missing? The file is:
package {
import flash.display.MovieClip;
import flash.display.Sprite;
import flash.display.Loader;
import flash.events.MouseEvent;
import flash.events.Event;
import flash.events.ProgressEvent;
import flash.net.URLRequest;
import flash.net.URLLoader;
import flash.system.Security;
import BrightcovePlayer;
import flash.media.SoundMixer;
import caurina.transitions.Tweener;
import caurina.transitions.properties.ColorShortcuts;
import pipwerks.SCORM;
import flash.external.ExternalInterface;
public class MainWrapper extends MovieClip {
public var loadedSwf:URLRequest;
public var contentLoader:Loader = new Loader ;
public var contentContainer:Sprite;
public var xmlLoader:URLLoader;
public var videoList:XML;
public var currentLoadedSection:Number;
public var nextEnabled:Boolean = false;
public var currentModule:Number = 0;
public var currentContent:Number = 0;
public var currentContentType:String;
public var advanceBehavior:String;
public var prevBehavior:String;
public var previousPage:String;
public var moveAdv:Boolean;
public var timesAdvanced:Number = 1;
public var numPages:Number = 1;
public var furthestPage:Number = 0;
public var scorm:SCORM;
public var lmsConnected:Boolean;
public var lessonStatus:String;
public var success:Boolean;
public var suspend_str:String;
public var suspend_data:String;
public var arrayToParse:Array;
public var videoChoice:Number = 0;
public var vidChoice:Number = 0; // Picks up button selections from loaded swf...default is 0 if only one ID supplied
public var vidID:Array = new Array(); // Recieves XML supplied video IDs
public var MC:MovieClip;
public var swfURLChoice:Number = 0; // Picks up button selections from loaded swf...default is 0 if only one ID supplied
public var swfURL:Array = new Array(); // Recieves XML supplied swf URLs
public function MainWrapper() {
// constructor code
addEventListener(Event.ADDED_TO_STAGE,init);
public function init(e:Event):void {
initializeTracking();
contentContainer = new Sprite ;
addChild(contentContainer);
exit_btn.visible = false;
main_HUD.home_btn.visible = false;
addNavListeners();
mainMenuVisibility(false);
textPanel_mc.mask = panelMask_mc;
ColorShortcuts.init();
Security.allowDomain("http://admin.brightcove.com");
Security.allowDomain("http://c.brightcove.com");
Security.allowDomain("http://brightcove.com");
BrightcovePlayer.initialize(this,onBrightcoveVideoComplete,onBrightcoveInitComplete,onBri ghtcoveVideoPlay);
public function loadXML():void {
xmlLoader = new URLLoader ;
xmlLoader.addEventListener(Event.COMPLETE,showXML);
xmlLoader.load(new URLRequest("playlist.xml"));
public function showXML(e:Event):void {
trace("Line 95: Loaded XML");
xmlLoader.removeEventListener(Event.COMPLETE,showXML);
XML.ignoreWhitespace = true;
videoList = new XML(e.target.data);
numPages = videoList.module[currentModule].listedContent.length();
trace("Line 100: numPages="+numPages);
loadContent();
public function mainMenuVisibility(setVis:Boolean):void {
main_HUD.visible = textPanel_mc.visible = setVis;
private function onBrightcoveVideoComplete() {
trace("Line 107: video has stopped");
endPageNav();
private function onBrightcoveVideoPlay() {
trace("Line 111: player is playing");
Tweener.addTween(BrightcovePlayer.instance,{alpha:1,time:3});
updateNav(currentContentType);
loadMsg_mc.visible = false;
checkForBeginning();
private function onBrightcoveInitComplete() {
trace("Line 118: init is complete");
loadXML();
public function loadContent():void {
if (currentContent > furthestPage) {
furthestPage = currentContent;
trace("Line 125: The furthest page so far: "+furthestPage);
saveCoursePos() //SCORM Bookmark
var loadedContentType:String = String(videoList.module[currentModule].listedContent[currentContent]. @ type);
currentContentType = loadedContentType;
switch (loadedContentType) {
case "cap" :
trace("Line 133: loading a Captivate swf");
advanceBehavior = "next";
prevBehavior = "prev";
loadMsg_mc.visible = true;
BrightcovePlayer.stopAndHide();
mainMenuVisibility(false);
swfURL = videoList.module[currentModule].listedContent[currentContent].pathToContent.split(",");
loadedSwf = new URLRequest(String(swfURL[swfURLChoice]));
contentLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,loadProgress);
contentLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,loadComplete);
contentLoader.load(loadedSwf);
break;
case "swf" :
trace("Line 146: loading an interactive swf");
advanceBehavior = "next";
prevBehavior = "prev";
loadMsg_mc.visible = true;
BrightcovePlayer.stopAndHide();
swfURL = videoList.module[currentModule].listedContent[currentContent].pathToContent.split(",");
loadedSwf = new URLRequest(String(swfURL[swfURLChoice]));
trace("XXXXXXXXXXXXX "+(String(swfURL[swfURLChoice]))+" XXXXXXXXXXXXXXXXX");
contentLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,loadProgress);
contentLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,loadComplete);
contentLoader.load(loadedSwf);
break;
case "quiz" :
trace("Line 158: loading a quiz");
advanceBehavior = "next";
prevBehavior = "prev";
BrightcovePlayer.stopAndHide();
loadMsg_mc.visible = true;
swfURL = videoList.module[currentModule].listedContent[currentContent].pathToContent.split(",");
loadedSwf = new URLRequest(String(swfURL[swfURLChoice]));
contentLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,loadComplete);
contentLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,loadProgress);
contentLoader.load(loadedSwf);
break;
case "bcVid" :
checkForBeginning();
advanceBehavior = "next";
trace("Line 172: loading a Brightcove video");
//vidFrame_mc.visible = true;
//videoBG.visible = true;
//setChildIndex(vidFrame_mc,numChildren - 1);
vidID = videoList.module[currentModule].listedContent[currentContent].videoID.split(",");
trace(vidID);
BrightcovePlayer.instance.alpha = 0;
BrightcovePlayer.playVideo(this,0,vidID[videoChoice],140,112.5,"");
break;
default :
trace("Line 183: unrecognized type. check the node's 'type' attribute");
break;
public function contentFadeOut():void {
if (currentContentType == "bcVidBranch" || currentContentType == "bcVid") {
trace("Line 190: fading BC vid");
Tweener.addTween(BrightcovePlayer.instance,{alpha:0,time:.5,onComplete:doLoadNext});
} else {
trace("Line 193: fading something else");
Tweener.addTween(contentLoader.content,{alpha:0,time:.5,onComplete:doLoadNext});
public function movePanel(moveDir:String):void {
switch (moveDir) {
case "up" :
if (textPanel_mc.y != 145) {
Tweener.addTween(textPanel_mc,{y:145,time:.5,transition:"easeOutSin"});
break;
case "down" :
if (textPanel_mc.y != 645) {
Tweener.addTween(textPanel_mc,{y:645,time:.5,transition:"easeOutSin"});
break;
default :
trace("Line 211: WAT. That is not a valid direction");
break;
public function getSWFChoice(e:Event):void {
MC = MovieClip(contentLoader.content);
swfURLChoice = MC.swfURLChoice;
contentLoader.content.removeEventListener( "getSWFChoice" , getSWFChoice );
trace("YYYYYYYYYYYYYYYYY swfURLChoice="+swfURLChoice+" YYYYYYYYYYYYYYYYYYYY");
playOn();
public function getVidChoice(e:Event):void {
MC = MovieClip(contentLoader.content);
videoChoice = MC.vidChoice;
contentLoader.content.removeEventListener( "getVidChoice" , getVidChoice );
playOn();
public function playOn() {
timesAdvanced++;
moveAdv = true;
contentFadeOut();
hideNavControls();
public function loadComplete(e:Event):void {
loadMsg_mc.visible = false;
contentLoader.contentLoaderInfo.removeEventListener(Event.COMPLETE,loadComplete);
contentLoader.contentLoaderInfo.removeEventListener(ProgressEvent.PROGRESS,loadProgress);
contentLoader.content.addEventListener("endOfContent",endContentHandler);
contentLoader.content.addEventListener("getSWFChoice",getSWFChoice);
contentLoader.content.addEventListener("getVidChoice",getVidChoice);
Tweener.addTween(main_HUD.progBar_mc.progFill_mc,{scaleX:(currentContent) / int(numPages - 1),time:.4,transition:"easeOutSin"});
if (currentContent == 0){
main_HUD.pgNum_txt.text = "Welcome";
} else{
main_HUD.pgNum_txt.text = "Page " + currentContent + " of " + int(numPages - 1);
switch (currentContentType) {
case "cap" :
contentLoader.content.addEventListener("quizAdvancePage",quizNext);
break;
case "swf" :
contentLoader.content.addEventListener("quizAdvancePage",quizNext);
break;
case "quiz" :
contentLoader.content.addEventListener("quizAdvancePage",quizNext);
var loadedContent = MovieClip(contentLoader.content);
var xmlQuizContent = videoList.module[currentModule].listedContent[currentContent].question;
var numQuestions = int(xmlQuizContent.length());
var questionArray:Array = new Array ;
var choiceArray:Array = new Array ;
var correctChoiceArray:Array = new Array ;
var responsesArray:Array = new Array ;
var passedImageArray:Array = new Array();
for (var i = 0; i < numQuestions; i++) {
questionArray.push(String(xmlQuizContent[i].questionText));
var tempString:String = "";
for (var j = 0; j < xmlQuizContent[i].answerChoice.length(); j++) {
tempString += xmlQuizContent[i].answerChoice[j] + "%";
choiceArray.push(tempString);
tempString = "";
correctChoiceArray.push(xmlQuizContent[i]. @ correctChoice);
passedImageArray.push(xmlQuizContent[i]. @ dispImage);
responsesArray.push(xmlQuizContent[i].responseText);
loadedContent.populateQuiz(questionArray,choiceArray,correctChoiceArray,responsesArray,pa ssedImageArray);
break;
default :
break;
addContent();
checkForBeginning();
public function endContentHandler(e:Event):void {
//here, we will enable navigation again
trace("Line 295: END OF CONTENT");
mainMenuVisibility(true);
loadMsg_mc.visible = false;
endPageNav();
updateNav(currentContentType);
Tweener.addTween(main_HUD.next_btn.bg,{_color:0xffffff,time:.4,transition:"easeOutSin"});
nextEnabled = true;
//checkFurthestPage(e.target.currentFrame);
checkFurthestPage(currentContent);
if (currentContent == int(numPages - 1)) {
setCourseToComplete();
public function checkFurthestPage(evalNum:Number):void {
if (isNaN(furthestPage[currentLoadedSection])) { trace("Line 312: furthestPage[currentLoadedSection] is NaN"); }
if (evalNum > furthestPage[currentLoadedSection]) {
trace("Line313: currentLoadedSection is a Number");
furthestPage[currentLoadedSection] = evalNum;
trace("Line315: furthestPage[currentLoadedSection] = "+furthestPage[currentLoadedSection]);
saveCoursePos();
public function endPageNav():void {
trace("Line 321: On page " + currentContent + " of " + int(numPages - 1));
setChildIndex(main_HUD,numChildren - 1);
if (currentContent < int(numPages - 1)) {
main_HUD.next_btn.visible = true;
} else {
exit_btn.visible = true;
public function hideNavControls():void {
main_HUD.next_btn.visible = false;
main_HUD.prev_btn.visible = false;
exit_btn.visible = false;
public function loadNext(me:MouseEvent):void {
timesAdvanced++;
moveAdv = true;
contentFadeOut();
hideNavControls();
public function quizNext(e:Event):void {
timesAdvanced++;
moveAdv = true;
contentFadeOut();
public function loadPrev(me:MouseEvent):void {
timesAdvanced--;
trace("Line 350: loading prev");
moveAdv = false;
doLoadPrev();
hideNavControls();
public function doLoadNext():void {
switch (advanceBehavior) {
case "next" :
currentContent++;
break;
case "noAdvance" :
break;
default :
for (var i in videoList.module[currentModule].listedContent) {
if (advanceBehavior == videoList.module[currentModule].listedContent[i].contentTitle) {
currentContent = i;
break;
trace("Line 372: loading next");
contentLoader.unloadAndStop();
if (contentContainer.numChildren > 0) {
contentContainer.removeChild(contentLoader);
loadContent();
public function doLoadPrev():void {
switch (prevBehavior) {
case "prev" :
currentContent--;
if (currentContent < 0) {
currentModule = 0;
currentContent = 1;
timesAdvanced = 2;
numPages = 2;
break;
default :
for (var i in videoList.module[currentModule].listedContent) {
if (prevBehavior == videoList.module[currentModule].listedContent[i].contentTitle) {
currentContent = i;
break;
trace("Line 400: loading prev");
contentLoader.unloadAndStop();
if (contentContainer.numChildren > 0) {
contentContainer.removeChild(contentLoader);
loadContent();
public function addContent():void {
contentContainer.addChild(contentLoader);
navToTop();
textPanelListener();
public function loadProgress(pe:ProgressEvent):void {
var percentageLoaded:int = (pe.bytesLoaded / pe.bytesTotal) * 100;
trace("Line 415: Loading..." + pe.bytesLoaded + " out of " + pe.bytesTotal);
loadMsg_mc.loadText_txt.text = String(percentageLoaded) + "%";
public function updateNav(contentTypeCondition):void {
trace("Line 420: Checking nav. On Page " + currentContent);
if (currentContent == 0) {
main_HUD.prev_btn.visible = false;
navToTop();
public function checkForBeginning():void {
trace("Line 427: Check for beginning");
if (currentContent != 0) {
trace("Line 429: Is not beginning");
main_HUD.prev_btn.visible = true;
} else {
mainMenuVisibility(false);
if (currentContent < furthestPage) {
main_HUD.next_btn.visible = true;
public function textPanelListener():void {
if (videoList.module[currentModule].listedContent[currentContent].panelText != "_noText") {
trace("Line 443: should move up");
movePanel("up");
textPanel_mc.panelText_mc.gotoAndStop(videoList.module[currentModule].listedContent[curre ntContent].panelText);
} else {
movePanel("down");
public function addNavListeners():void {
main_HUD.prev_btn.mouseChildren = false;
main_HUD.prev_btn.addEventListener(MouseEvent.MOUSE_OVER,beginGlow);
main_HUD.prev_btn.addEventListener(MouseEvent.MOUSE_OUT,fadeGlow);
main_HUD.prev_btn.addEventListener(MouseEvent.CLICK,loadPrev);
main_HUD.next_btn.mouseChildren = false;
main_HUD.next_btn.addEventListener(MouseEvent.MOUSE_OVER,beginGlow);
main_HUD.next_btn.addEventListener(MouseEvent.MOUSE_OUT,fadeGlow);
main_HUD.next_btn.addEventListener(MouseEvent.MOUSE_UP,loadNext);
exit_btn.addEventListener(MouseEvent.MOUSE_UP,navHandler);
public function beginGlow(me:MouseEvent):void
switch (me.target.name)
case "next_btn" :
if (nextEnabled == true)
Tweener.addTween(me.target.bg,{_color:0xffffff,time:.4,transition:"easeOutSin"});
break;
default :
Tweener.addTween(me.target.bg,{_color:0xffffff,time:.4,transition:"easeOutSin"});
break;
public function fadeGlow(me:MouseEvent):void {
Tweener.addTween(me.target.bg,{_color:0x666666,time:.4,transition:"easeOutSin"});
public function determineSkip():void {
if (contentLoader.numChildren) {
var thisContent:MovieClip = MovieClip(contentLoader.getChildAt(0));
trace(currentLoadedSection+ "Current content: "+thisContent.currentFrame);
trace("Line 486 - Furthest page is "+furthestPage[currentLoadedSection]+" and the current page is "+thisContent.currentFrame);
if (furthestPage[currentLoadedSection] >= thisContent.currentFrame) {
trace("can skip this page");
Tweener.addTween(main_HUD.next_btn.bg,{_color:0xffffff,time:.4,transition:"easeOutSin"});
nextEnabled = true;
} else {
nextEnabled = false;
trace("can't skip");
public function navHandler(me:MouseEvent):void {
switch (me.target.name) {
case "next_btn" :
if (nextEnabled == true) {
nextEnabled = false;
main_HUD.next_btn.addEventListener(MouseEvent.MOUSE_UP,loadNext);
Tweener.addTween(main_HUD.next_btn.bg,{_color:0x666666,time:.2,transition:"easeOutSin"});
determineSkip();
} else {
trace("can't proceed yet");
break;
case "prev_btn" :
exit_btn.visible = false;
main_HUD.prev_btn.addEventListener(MouseEvent.MOUSE_UP,loadPrev);
determineSkip();
break;
case "exit_btn" :
contentLoader.unloadAndStop();
ExternalInterface.call("closeCourseWindow");
break;
//HERE THERE BE SCORM CODE
public function exitCourse(me:MouseEvent):void {
ExternalInterface.call("closeCourseWindow");
public function initializeTracking():void {
scorm = new SCORM ;
lmsConnected = scorm.connect();
if (lmsConnected) {
lessonStatus = scorm.get("cmi.core.lesson_status");
if (lessonStatus == "completed" || lessonStatus == "passed") {
scorm.disconnect();
} else {
success = scorm.set("cmi.core.lesson_status","incomplete");
scorm.save();
suspend_data = scorm.get("cmi.suspend_data");
if (suspend_data.length > 0) {
arrayToParse = suspend_data.split(",");
currentContent = parseInt(arrayToParse[0],10);
furthestPage = parseInt(arrayToParse[1],10);
} else {
//connectionStatus_txt.text = "Could not connect to LMS.";
public function saveCoursePos():void {
trace("Line 554: Saving position at " + currentContent);
var suspend_str:String = String(currentContent)+","+String(furthestPage);
scorm.set("cmi.suspend_data",suspend_str);
scorm.save();
public function setCourseToComplete():void {
trace("Line 561: Saving complteted course");
success = scorm.set("cmi.core.lesson_status", "completed");
scorm.disconnect();
lmsConnected = false;
public function navToTop():void {
setChildIndex(main_HUD,numChildren-1);You'll have to do two things.. Elaborate on exactly what you mean by a white screen appears. What is turning white? Are you generating a SWF from captivate of a screen capture session, then trying to load that SWF with a wrapper and when you do so it turns white? (In that scenario, if Captivate was looking for external assets it can't find, that'd be why). Please include more details on that.
Second, code of this size pasted into the forum really doesn't help. You'll need to do the work to isolate exactly what part of the code you're seeing this white box appear. Run it in a debugger line by line until you witnesss it turn white and only share that small portion of code. And if you do choose to share a ton of code, please use a site like pastebin.com which will retain formatting and color coding, making it much easier to read, and then share that pastebin link. -
Hello!
I have a MacBook Air. I have got a software update notification couple of days ago. I've clicked on it today, and it started installing updates.
But, I have got a notification telling that not all updates were installed successfully, then I have clicked on "Restart" from the notification box. Then my Mac restarted and the white screen with Apple logo and the update progress appeared (like what always happens during updates).
The problem that while the update progress reached around half the way, my Mac shutdown. I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down.
Please Help me!
MacBook Air (11-inch Mid 2009)Welcome to Apple Discussions
You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
Also remove any attached peripherals.
Reboot in Repair mode (command-R at start) and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
You must have more than enough (not just enough) empty (free) disk space for the update. -
White screen appears when I play a downloaded movie
When I play a movie after I have downloaded it a white screen appears. Has this happened to anyone else? Does anyone have any suggestions on how fix this? I don't think it is a connection issue as I can play movie previews and trailers perfectly fine.
Smithy1783 wrote:
Through trial and error I can only glean that the problem is with the way in which the devices handshake at the point when they switch off - either explicitly or shut down suddenly when the lid is shut on my laptop or the battery goes flat.
I think that the issue does indeed lie with individual network components but my network is entirely Apple excepting the USB ext HDD that is attached to my AEBS. My house is quite small and signal strength is not an issue. I even use 802.11n on 5GHz to minimise the risk of interference... so I think that I should reasonably expect Apple to resolve such issues.
i don't know which particular problem you are talking about (possible the white screen issue), but i would assume your TV is not an apple product? an HDMI handshake is usually what causes the white screen issue, and apple have no control over how a TV manufacturer implements their own unique way for HDMI handling.
HDMI although a standard, still is quite shaky amongst lots of devices. -
While playing a video in apple ipod nano 7th generation,suddenly white screen appears and i can't able to do anything. i stuck..
Can anyone able to give me a answer for this..??Hi ..
Follow the troubleshooting steps here > Apple - Support - iPod - iPod nano Troubleshooting -
Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?
File icon with ? mark on it means it can't read from the hard drive. The hard drive is now wiped or bad. If just wiped then you will need to reinstall your operating system, OS X. If bad you will need to replace the drive.
Start with booting the computer from the OS X install DVD that came with your system. If the Mac came with Lion Pre-Installed then you use the Lion internet recovery system to reinstall (Hold down Command+r keys or Command+Option+r keys to boot the computer from over the internet to the Lion recovery HD system).
Good Luck. -
A white screen appears on my phone when I enter gallery ,settings....
A white screen appears on my phone when I enter gallery ,settings....
Hi your phone may need the software re-installing
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
this link will show you whay needs to be done.
http://uk.blackberry.com/support/downloads/download_sites.jsp
if you do need to re-install your software start here, this will take you to where your can download the software to your PC or Laptop, Please read the Crackberry instruction as they will help, if you can't do it. take it back to the shop as you have a 12 month warranty, aslong as you've not had the phone 12 months, they have to send it off to blackberry -
Why does the apple icon come on then off then a white screen appears?
Why does the apple icon come on then off then a white screen appears?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Differ in Exch appears while clearing account 1212 where no forecurren used
Hi All,
Please help me on this issue,
Difference in Exchange appears while clearing account 1212000 where no foreign currency is used.
Problem description: as one of my activities is clearing of account 1212000. On this account loan interests and its payment are recorded. All amounts are posted in EUR. No DIE should be recognized and while clearing this account there should be no impact on P&L:
However while clearing (doc no 20000503801 Difference in exchange in amount of 13.567,40 EUR (equal to 18.336,73 USD) were posted automatically on account 5432100.
As I have noticed while August closing this Diference in exchange will be automatically reversed late evening while valuation report is running:
I have two questions regarding this issue:
What is the reason that Difference in exchange appears for transactions performed in one currency. Is it designed on purpose or is it a spin-off effect of performed upgrade? Before upgrade there was not such an issue.
1.In case if these Difference in exchange remains will it be always reversed automatically while valuation?
Thanks in advance
Nandha
Edited by: nandhasapfi on Sep 28, 2011 7:11 AMHi Raghavendra,
Yes, the SAP note is very helpful and it is indeed due to the one of the tax condition being processed and therefore its tax code flow down to the other non tax items.
I have tried to shift up the conditon type before the tax condition in the procedure, but i realised that it generate billing errors.
Initially, the sequence in my PP is
270 0 ZGX1 GST Pseudo 1
280 0 ZGSX GST Exclusive
290 0 ZGXA GST Absorb
300 0 ZGX2 GST Pseudo 2
310 0 ZGX3 GST Pseudo Diff.
The tax code comes from ZGSX, which is created as a tax condition type using ZGST as reference.
I tried to shift ZGX2 to step 275 below ZGX1 so that it will not inherit the tax code from ZGSX, but it gives billing error.
I tried moving ZGX1 down to step 295, but it also give billing errors.
When I removed the reference to ZGST for ZGX1, and change the calculation type to formula, it removes the billing errors. But I got zero values for both ZGX1 and ZGX2, even if i read table with key KSCHL = 'ZGSX'. I tried 'ZGST' with no success also. Good news is, the tax code in ZGX2 is gone.
Strangely, if i change the condition type of ZGX2 to reference to ZGST, and use the same formula as ZGX1, it does not gives billing error. But ZGX1 continue to be empty.
Can someone help me on this?
Thank you!
Albert Lee -
my macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?
Try this.
Erase and Reinstall OS X
Note: This will delete all data on the disk. Back up important files before continuing.
Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
Press the Power Button to turn on the computer.
Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads.
Select Disk Utility and then choose Continue.
Select your startup disk (Macintosh HD by default) from the left.
Select the Erase tab.
Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X and then choose Continue.
Follow the instructions.
I hope I solved your question.
Austin
Maybe you are looking for
-
Error 1311 Source file not found? Plus another error. I need help bad!
Error 1311. Source file not found. S:\Documents and Settings\Owner\Local Settings\Temparary Internet Files\content.IE5\45UJKXYZ\ja150000[ 1 ].cab. Verify that the file exists and that you can access it. That appears when trying to install Java 5 upda
-
How do I open a pdf in Outlook 2010?
I have Acrobat 7.0 Standard and cannot open pdf documents from Outlook 2010 e-mails. The error message reads that no valid Acrobat serial number found. Acrobat quits (after clicking OK). Please advise how to fix this problem.
-
What to check when comparing query performance in 2 envs
I have a query that executes in 1 sec in env A. Env A was initially was 9.2.0.5 and later upgraded to 9.2.0.6. The same query executes in 1 min 30 secs in Env B. Env A has always been on 9.2.0.6. The query plans and stats are same in both the environ
-
How and were 2 use module processor..........
hi, in adapter v have 3 tabs.first one is parameters,second one idetifiers and third one module.........so i want to no how this module is used.........in which situvation we use it and how?
-
Hello, Can anyone help me with the following question. How using the SIM card memory instead of the phone memory for incoming and outgoing SMS messages. Device: Nokia C1-01 Solved! Go to Solution.