Blue Yeti Microphone Issues

Recently purchased a Blue Yeti microphone from Apple and I've had an issue after only using it for one day.
In Garageband > Preferences > Audio/MIDI, the microphone used to be recognised as "Yeti Microphone" however it is now recognised as "USB Advanced Audio Device". This has lowered the quality and increased the sensitivity of the mic by 10 fold. I'm not sure what would have caused this since it occurred after I simply unplugged the mic one day and plugged it back in the next and boom it happened.
Does anyone know how to resolve this? I tried with a new chord as well and that didn't fix the issue...

I'm not sure if this will help but open the Audio Midi setup utility click the on the Yeti or Advance USB device whatever it shows up as. See if you can change the settings to 44100 and 24 bit.

Similar Messages

Blue Yeti microphone problem with iPad 2!

I have a Blue Yeti microphone which I connect to a powered hub (Logik LP4HUB10) and an Apple camera connection kit which I then have used through GarageBand on my iPad 2. Due to various reasons I did not use the Yeti for about 9 months or so. Anyway, when I returned to use it today, when I plug in (through recommended connection sequence) and turn on GarageBand, the microphone does not work. The light is on constantly (doesn't even blink when I press the mute button) and GarageBand does not seem to acknowledge the microphones existence (not even an error message of any sort). I have tried the microphone on my PC and it works fine. The Yeti previously worked fine through GarageBand on my iPad 2. Therefore, can anyone provide any help at all? Any help would be greatly appreciated.
Many thanks,
C

It's really hard to say why it's not working since it should not work to begin with.
That's a completely unsupported configuration and could very well damage your iPad.

Why doesn't my MacBook Pro recognize Blue Yeti microphone?

I have a Blue Yeti microphone and when I plug it though USB to my MacBook Pro I can't find it. I have my internal sound input only.
I use Yosemite OS X.

You're looking at the Sound input in System Settings? Should simply work. If you plug headphones direction into the Yeti, do you hear anything?
http://www.bluemic.com/yeti/support/

Blue Yeti Microphone (3 months later... no answer ...

I'm not going to bother to say "Good Evening" because I'm very angry! I bought a Blue Yeti from Chat and Vision, a Skype-Certified store, 3 months ago and it came faulty. 3 xxxxxxx MONTHS! I sent you e-mails and tickets through your Returns ticket system. I even sent you an e-mail which I quote:
"Good evening, According to the received e-mail about my complaint, I'll attach two photos about my item's fault. According to my father's explanation - he's a mechanical engineer - the problem is from the side hoop from the mic's stand, it has a big gap, creating a big tension on the screw zone, damaging the screw's fillets. As I described, the mic's screws don't tight making the microphone loose/unstable. With this fault, I can't use it. On the photos you can see the side hoop and screw's fillets. I don't want to return this item. I want to repair it. Can it be repaired here, in Portugal? How much is going to cost? (The microphone is one month old!!)"
This was sent 2 MONTHS AGO (23/10/2014). If I won't get an imediat answer I will actuate the legal methods and I will spread through the World Wide Web your kind of behavior. I need help from Skype.

SuperMicroondas wrote:
1. I sent you e-mails and tickets through your Returns ticket system. I even sent you an e-mail
2. Can it be repaired here, in Portugal? How much is going to cost?
Hello
1. Are you addressing Skype or Chat&Vision?
2. As you are located in Portugal you would be best placed to answer those questions.
We can contact Chat&Vision on your behalf if you wish.
Please clarify the above points.
Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Blue Yeti microphone being activated by OS - won't stay muted!

I upgraded to Yosemite last night and I love it but for one very annoying bug: I use a Blue Yeti USB microphone as my input device, but since it has such an active diaphragm I keep it muted using the front mute button (turning the input to zero doesn't quite do it) to prevent feedback. Since upgrading, there are a huge number of applications that "un-mute" the mic without my input. Anything, it seems, that might potentially use a microphone activates it. As a result, if I have music playing I will suddenly have the mic feeding back without my consent - very annoying! Is there a fix to this? Any ideas?

It seems that any time a system sound of any kind is played it trips the mute switch. Very annoying.

Using blue yeti microphone with skype question

Hi,
I just bought a blue yeti mic to use with skype. The other person can hear me fine
but I cant hear him. All tests checked out fine on both ends. Then I saw the headphone jack on the bottom of the yeti mic. Question: do I have to have headphones on and plugged into the yeti headphone jack in order to hear someone, or is there a way to use the yeti and hear the other party without using headphones?
Thanks for any replies!

I briefly googled your issue and came up with this: http://the-gadgeteer.com/2010/08/11/blue_yeti_mic/
It may be worth a read, as it sounds like you may need headphones unless you're willing to mess around with your computer's audio functions.

My Mac Mini isn't recognizing my Blue Yeti (USB) microphone.

I've had both Mac mini & Blue Yeti for about a year. They both individually work perfectly fine, but it wasn't until recently I decided to use the mic on my mini.
When I plug my Blue Yeti microphone into the USB port on the back of the Mac Mini, the light on the microphone turns on. In which indicating that the microphone is on. Yet, when in applications such as audacity, garage band, and reaper it will not recognize the microphone. Disabling me from recording at all. (I also tried Mac preferences via audio, to see if it appears there. Unsuccessful.)

Yes, when i go to System Preferences>Sounds>input the only thing that appears is
And also all the ports work, ive tested it out with my iphone charger.
How do i look up the system report ?

Connecting 2 USB Devices for recording in GarageBand blue yeti and M-Audio Mobil pre. will they both work together one track each?

I Have set my Audio Midi Setup under Audio Devices to Aggregate Devices and selected M-Audio MobilPre USB and Blue Yeti Microphone.
I plugged my MobilPre into one USB port on my MacBook and the Blue Yeti Mic into the other USB on my MacBook. So I have two inputs
and I set each device for OUTPUT as the HeadPhones from the Blue Yeti Mic. I still cannot record the vocals on the blue yeti and the Guitar on the MobilPre
At the same time even though both show the rec button is active on both. What do I need to do to get these to both work recording at the same time?

I'm not sure what you mean by "mixed with audio in Alsamixer". Can you clarify?
With that said, my problem did mysteriously fix itself after some update (presumably to alsa). Unfortunately, I noticed it in passing one day while I was changing the volume of something in pavucontrol, so I don't remember the exact update that caused it to work. But yes, my current setup does work now: I can listen to audio through my DAC and use the Yeti for recording. However, I have found that use of the Yeti crashes Google Hangouts, although it works perfectly in every other program I've tried.
As documentation, here is my current working setup (it is very similar to the above): in PulseAudio, the DAC is set to be a Digital Stereo (IEC958) output. The Yeti (called an 'Integrated Rate Matching Hub' in pavucontrol) is set to be an Analog Stereo Input. In the input devices section, I have the Yeti's volume set to around 58% (-14.31 dB), which is past the base volume a fair ways but produces decent levels for recording. The DAC's volume is set to 100% (0dB gain, the DAC takes care of the level). In alsamixer, I have the mic level for the Yeti set to 40.
Edit: This is a long-time-later edit, but let me say that when you have multiple USB audio devices, what USB hub and in what order they are connected seems to matter a great deal. If you can't get your Blue Yeti to work, try moving it to a different set of USB ports (controlled by a different controller) on your motherboard. This magically fixes the issue for me.
Last edited by rwiggins (2014-12-14 00:26:39)

Premiere Pro CC won't recognise a Blue Yeti Mic-.but only on an iMac?

Hi There
I have a Blue Yeti Microphone that works perfectly with Premiere Pro CC on my Macbook Pro, but on my new iMac it isn't listed in the dropdown menu in the Audio Hardware settings.
The iMac is recognising the Microphone in system Prefs and Audio Midi setup. It also recognises it in Final Cut Pro and in Adobe Audition so it's definately something to do with Premiere Pro.
Any help would be really appreciated.
Many thanks

M3PBoss wrote:
Sorry to dig this back up. but the .pdf link is broken. I have a Blue Eye Ball that I'm using for audio,
and am having the same problem. I've checked it out using other programs, and it's not the mic, so...?
Run the "MIDI Setup" tool on the Mac (comes w/OS X) and create a new Aggregate device. In that agg device, add the Blue mic and whatever sound output you're using (Line Out, Headphones, etc). Close the MIDI Setup App. In Pr, select that new Agg device as your sound device. In order to record from it, you'll need to create a new mono audio track. Once done, you should be free to record from it.

Logic 9 & The Blue Yeti

Hi There. I'am very new at this so any help is much appreciated
I have recently started using Logic 9 and am attempting to record vocal tracks using a Blue Yeti Microphone.
When i record, i get a lot of static on the track
Weather this is due to improper setup with logic of input levels, im not sure
Is anyone able to offer assistance??
Thanks

I would suggest you start with a Garageband session, see if this makes any difference. it will also be a lot easier to figure out problems.
Have a nice day!

Blue Yeti not working on Mavericks

Is there any help to get the blue yeti microphone working?
Mavericks doesn't recognize the microphone.
Help.

Hey ther Tim,
It sounds like after having updated to Mac OS X 10.9, you are no longer able to use your USB microphone.
I found this article for you to help troubleshoot what may be happening, named:
OS X Mavericks: Check your device’s USB connection
http://support.apple.com/kb/PH14144
If a USB device isn’t working properly, it might not be properly connected to your computer.
If your computer has more than one USB port, switch the device’s cable to another port. If you still can’t use the device, contact the manufacturer for more information.If you can use the device after switching ports, connect another device to the first port. If you can’t use this device, shut down the computer and unplug it from the power outlet. Wait about a minute, then plug it into the power outlet and start up your computer. If you still can’t use a device with the port, your computer may need to be serviced.Find out how to service or repair your Mac
If the device is connected to a USB hub, make sure the device and the hub are the same speed. For example, connect a USB 2.0 Hi-Speed device to a USB 2.0 Hi-Speed hub.
If more than one device is connected to the USB port, disconnect all other devices. Connect a keyboard and mouse to another USB port. Do not use USB hubs or extension cords.If you can use your device now, there may be a problem with one of the other devices. Try reconnecting the other devices, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Thank you for using Apple Support Communities.
Regards,
Sterling

Blue Yeti USB microphone not working in ALSA/PulseAudio

Hi all,
I recently bought a Blue Yeti USB microphone. It is supposed to require no drivers for Windows and OS X, and so far, it works well under Windows, but I cannot seem to get it to function on Arch Linux. As fair warning, although I am relatively experienced with Linux, I don't know much about the internals of ALSA/PA --- up until now, it has just "always worked", so this is my first real foray into the area. I've tried for many days, with no success, to get this thing working.
So, let's start off first with my configuration.
I have a few audio devices:
An on-board audio solution that I don't typically use. For testing, I have connected an old, crappy pair of headphones, but normally I keep this disabled. It has one capture device. (Analog stereo [or 5.1/7.1/etc] duplex)
An external DAC that is connected via USB and is output-only. So, no capture devices on that. (Digital/IEC958 output)
The Blue Yeti itself, which is connected via USB and supports output (it has an internal DAC) as well as input. So, one capture device here. (Digital stereo output and analog stereo input???)
The HDMI-out stuff for nvidia, which I never use
Here is the output of "arecord -l":
**** List of CAPTURE Hardware Devices ****
card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 2: ALC892 Alt Analog [ALC892 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Here is the the output of "arecord -L":
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Microphone
Yeti Stereo Microphone, USB Audio
Default Audio Device
front:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
Front speakers
surround40:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
IEC958 (S/PDIF) Digital Audio Output
sysdefault:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
Here is the output of "aplay -l" (for completeness):
**** List of PLAYBACK Hardware Devices ****
card 0: Audio [USB2.0 High-Speed True HD Audio], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
If the output of "aplay -L" is needed, let me know, but it's not all that different from arecord -L.
Here is my /etc/asound.conf:
defaults.pcm.rate_converter "samplerate_best"
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
I don't remember where the bulk of that came from; maybe it was installed like that or maybe I put it in there. Here is another useful command showing non-commented-out/non-blank lines in the pulseaudio conf:
$ egrep -v '^;|^#|^$' /etc/pulse/*.conf
/etc/pulse/client.conf:autospawn=no
/etc/pulse/daemon.conf:exit-idle-time=0
/etc/pulse/daemon.conf:default-sample-rate = 192000
So, there's not much I've done there. Here's the contents of /proc/asound/cards:
0 [Audio ]: USB-Audio - USB2.0 High-Speed True HD Audio
CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed
1 [Microphone ]: USB-Audio - Yeti Stereo Microphone
Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed
2 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7530000 irq 52
3 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf7080000 irq 17
And here's the contents of /proc/asound/modules:
0 snd_usb_audio
1 snd_usb_audio
2 snd_hda_intel
3 snd_hda_intel
Now, here is the output of "pactl list sources" (the Blue Yeti is last in the list):
Source #3
State: RUNNING
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: yes
Volume: front-left: 17972 / 27% / -33.71 dB, front-right: 17972 / 27% / -33.71 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 610 usec, configured 100000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:2"
device.buffering.buffer_size = "76800"
device.buffering.fragment_size = "19200"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC892"
alsa.components = "HDA:10ec0892,10438436,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-front-mic: Front Microphone (priority: 8500, not available)
analog-input-rear-mic: Rear Microphone (priority: 8200, available)
analog-input-linein: Line In (priority: 8100, not available)
Active Port: analog-input-rear-mic
Formats:
pcm
Source #11
State: RUNNING
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #15
State: RUNNING
Name: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo.monitor
Description: Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "USB2.0 High-Speed True HD Audio"
alsa.long_card_name = "CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.7:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.7/6-1.7:1.0/sound/card0"
udev.id = "usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0319"
device.product.name = "USB2.0 High-Speed True HD Audio"
device.serial = "CMEDIA_USB2.0_High-Speed_True_HD_Audio"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Formats:
pcm
Source #19
State: RUNNING
Name: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo.monitor
Description: Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Intel Corp."
device.product.id = "9e84"
device.product.name = "Integrated Rate Matching Hub"
device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
device.form_factor = "microphone"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Formats:
pcm
Source #23
State: RUNNING
Name: alsa_input.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.analog-stereo
Description: Integrated Rate Matching Hub Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 17775 / 27% / -34.00 dB
Monitor of Sink: n/a
Latency: 949811526 usec, configured 100000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Intel Corp."
device.product.id = "9e84"
device.product.name = "Integrated Rate Matching Hub"
device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
device.form_factor = "microphone"
device.string = "front:1"
device.buffering.buffer_size = "19200"
device.buffering.fragment_size = "4800"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Integrated Rate Matching Hub Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USBb58e:9e84"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Honestly, I think that's about all of the configuration info I can give. Here are some screenshots of pavucontrol, though, in case you are not yet sated: http://imgur.com/a/ngyLl
Now, on to the debugging stuff. First: everything except Blue Yeti recording works. The external DAC works, the on-board audio (both input and output) work, using the DAC in the Blue Yeti to play music/monitor the microphone works (so it works as an output). The only thing that doesn't work is actual recording from the Blue Yeti itself.
When I try to record from the Blue Yeti with parecord -v, I get very strange behavior. Essentially, the "latency" of the microphone measured is exactly the same as the time it has been recording. That is, if it has been recording for 5 sec, then the latency is 5000000 usec. Also, if I try to record something in Audacity, I get no result except for a message box that says "Latency Correction has caused the recorded audio to be hidden before zero. Audacity has brought it back to start at zero." Also, pavucontrol doesn't show an input volume bar for the Blue Yeti, as in the above screenshots, whereas it normally will for microphones that are getting input. The Yeti is not muted, either, so it should be picking up ambient fan noise and such.
Does anyone have any ideas? Is there some configuration error I've made? Typically, this sort of stuff simply works out of the box for me, so I am somewhat stuck on what to do. Could it be a driver-level bug?

I'm not sure what you mean by "mixed with audio in Alsamixer". Can you clarify?
With that said, my problem did mysteriously fix itself after some update (presumably to alsa). Unfortunately, I noticed it in passing one day while I was changing the volume of something in pavucontrol, so I don't remember the exact update that caused it to work. But yes, my current setup does work now: I can listen to audio through my DAC and use the Yeti for recording. However, I have found that use of the Yeti crashes Google Hangouts, although it works perfectly in every other program I've tried.
As documentation, here is my current working setup (it is very similar to the above): in PulseAudio, the DAC is set to be a Digital Stereo (IEC958) output. The Yeti (called an 'Integrated Rate Matching Hub' in pavucontrol) is set to be an Analog Stereo Input. In the input devices section, I have the Yeti's volume set to around 58% (-14.31 dB), which is past the base volume a fair ways but produces decent levels for recording. The DAC's volume is set to 100% (0dB gain, the DAC takes care of the level). In alsamixer, I have the mic level for the Yeti set to 40.
Edit: This is a long-time-later edit, but let me say that when you have multiple USB audio devices, what USB hub and in what order they are connected seems to matter a great deal. If you can't get your Blue Yeti to work, try moving it to a different set of USB ports (controlled by a different controller) on your motherboard. This magically fixes the issue for me.
Last edited by rwiggins (2014-12-14 00:26:39)

Blu Yetti Pro Microphone Questions

Hey Guys
i just want t pick your brains for a bit i have Blu Yetti Pro USB microphone it works totally fine i can record in logic and garageband fine but my questions are
1. if i go to Launchpad>Other>Audio MIDI Setup sometimes the microphone is stuck on mute even though the actual microphone is not muted the only way i can resolve this is by unplugging the usb out of the microphone then replugging it back in and also the microphone won't pickup any sound sometimes unless i go to the input tab and move the input volume slider left to right.
2. also in Audio MIDI Setup the settings are the standard which is 44100.0 Hz at 2ch-24bit integer i notice in Logic Pro X if i change that to say 96000.0 Hz when i live record in logic Pro X my voice comes out real deep or Extreme Latency(Delay).
anyways i know these aren't real important questions i just thought if a fellow Helper could shed some light on these questions lol
if you need any more info let me know ill respond fairly quickly
thank you for your time guys and girls

After doing some research, found that it is possible to get rid of original SuperDrive with no issues. And usually all Blu-Ray drives are plug and play and require no driver.
The Blu-Ray is set region code by software just like with a DVD drive and with limited number of times you can change between regions.
Best Blu-Ray players are LG as they have the least problems of compatibility with the Mac Pro (unlike the Pioneers).
Thanks

I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. I need all three for a podcast, any solutions?

I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. At first I thought maybe the third microphone was just defected or something but I tested the mic individually and it works fine. It'll let me use two Blue Yeti's and another microphone but not three Yeti's at once.

David Boroditsky wrote:
The problem is that the mac chokes on having 2 identical mics attached at the same time.
Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

Microphone issues (blue snowball)

So I have a Blue SnowBall microphone which I use for Skype, but the problem I am having is that it seems to turn itself up without me doing anything and my friends complain its too loud. I have turned off auto adjust in Skype and also turned off allow applications to take exclusive control of this device but still I have this issue. Any help would be much appreciated thank you.

You only need to set it to 99%, but if it does not work, try to diasble any effects found in either the soundcard/or the snowball manufacturers own application in controlpanel or in control panel > sound (just breeze through all devices marked as default).
Be adviced:
Snowballs manufactured after July, 2007 (with serial numbers higher than 76-065000) are Windows 8, Windows 7 and Vista compatible. Snowballs with numbers lower than this are not Windows 8, Windows 7 or Vista compatible.
http://www.bluemic.com/snowball/#/support/

Blue Yeti Microphone Issues

Similar Messages

Maybe you are looking for