Blue Yeti (only) mike drops out, but not other mik...

Hi All:
Skype 7.5, Windows 8.1
Skype works fine for hours at a time when I use it with a Logitech webcam mike. But when I use my Blue Yeti it stops recording (and audio meter on Options > Audio Settings shows nothing) after a few minutes. I've tested having Audacity running simultaneously to see what its audio meter simultaneously shows, and it too stops recording at the same time. (Note that the Yeti will happily record into Audacity when Audacity alone is running). Unplugging and then replugging the mike fixes it for a short time, but then Skype stops recording again. Skype effectively freezes at the point it stops recording.
So the issue seems to be some sort of Skype-Blue yeti interaction. I've tweaked various Windows sound settings. but no luck. The Yeti does nto have a driver, so no joy there. I've updated my realtek sound drivers, again no joy. Also bought a new cable for the yeti. Still no joy.
Suggestions?

I do have exact same issue, trying to upgrade to the 7.6 see what is gonna happen. hope this issue solves with using new version of skype.

Similar Messages

  • Blue Yeti (only) mike drops out, but not other mike

    Hi All: Skype 7.5, Windows 8.1Skype works fine for hours at a time when I use it with a Logitech webcam mike. But when I use my Blue Yeti it stops recording (and audio meter on Options > Audio Settings shows nothing) after a few minutes. I've tested having Audacity running simultaneously to see what its audio meter simultaneously shows, and it too stops recording at the same time. (Note that the Yeti will happily record into Audacity when Audacity alone is running). Unplugging and then replugging the mike fixes it for a short time, but then Skype stops recording again. Skype effectively freezes at the point it stops recording.So the issue seems to be some sort of Skype-Blue yeti interaction. I've tweaked various Windows sound settings. but no luck. The Yeti does nto have a driver, so no joy there. I've updated my realtek sound drivers, again no joy. Also bought a new cable for the yeti. Still no joy.Suggestions?

    I do have exact same issue, trying to upgrade to the 7.6 see what is gonna happen. hope this issue solves with using new version of skype.

  • Google Calendar can only be read out but not modify

    hello,
      i could set up my Google Calendar account in my playbook abd sync it. eveything is there. but... i can not add or modify appoitements.
      is it a limitation? i wish to have full access to my calendar on my android phone and on my playbook.
      bye

    Hello nicolas_det,
    Thank you for reporting the issue you are experiencing with adding and modifying Google Calendar appointments on your BlackBerry PlayBook tablet.
    The following article will provide you with more information regarding this issue:
    Unable to add or modify CalDAV Gmail calendar account - http://www.blackberry.com/btsc/KB33458
    Have a great day.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Intenet drops out - but not completely

    I'll be using my mini and all of a sudden I wont be able to open a webpage,
    But if I'm connected to an IRC on XChat I can continue chatting and carry my MSN/AIM conversations on. But I can't open a new webpage or get new email.
    I've tried using different browsers to connect but all do the same, as does the iTMS.
    Anyone know whats going on?

    I do have exact same issue, trying to upgrade to the 7.6 see what is gonna happen. hope this issue solves with using new version of skype.

  • Windows 7 not forgetting disconnected USB devices, only on one PC, but not others/difer OS

    Okay so I've got 3 computers:
    1. Asus M5A99X EVO MOBO, Windows 7 Ultimate 64bit
    2. Lenovo Ideapad u310 LAPTOP, Windows 8 (just 8)
    3. Asrock z87e-ITX MOBO, Windows 7 Ultimate 64 bit and Windows 8.1 Pro 64-bit
    This issue only happens on computer 3 under windows 7.
    I've got a KVM switch that's supposed to make switching between these computers easier, it's very basic, it has one USB port going into it, and I plug my keyboard into that, my keyboard has a USB port on it that I plug my mouse into.
    When I'm on windows 7 on computer 3 the KVM works fine for about the first 4-7 switches between it and another computer. But after that I get "USB Bandwidth Exceeded" popups. I can switch the port it's plugged into the computer and it will start
    working again, but that defeats the purpose of having a KVM. And today it even locked up while I was MANUALLY switching the cable between my computers front access ports, because obviously the KVM wasn't reliable (like I switched between computers once every
    4-10 minutes), and even BSOD on me.
    I've contacted both Asrock and the KVM manufacturer and they both say it's the other's fault.
    So I shrank my C: on Comp3 today and installed windows 8.1 on it, and than I spammed the KVM switching like 8+ times, and it never once locked up or complained about me exceeding the bandwidth.
    So that means it's now Windows 7's fault, but it doesn't do this for Comp1.
    Somehow my new computers Windows 7 is not working right, and I don't know any viable options I can do about it. (comp3 is only about 1-2 weeks old) I've ran all the windows updates I can and it no longer says there are new updates when i run it.
    So I need some help about finding out why my Comp3's Win7 isn't forgetting that a USB device is no longer attached, because Win8.1 seems to have no problem with it.
    And just sticking with Windows 8 isn't really the solution, as I can't %^#$#!@ stand Windows8/Metro/Tiles/tablet$@!#onmydesktop.
    (laptop is a work laptop and i have no choice, but it's modded so I have my start menu back, but still it's annoying anytime I accidentally leave my desktop.)

    ...because it happens with even just the keyboard.
    Even though it all works with Win8.1 have you:
    -Tried a different keyboard?
    -Tried connecting mouse and keyboard to an external powered hub and connecting the hub to the kvm?
    -Tried connecting kvm to powered hub?

  • Problem viewing streaming video in some wifi networks, but not others

    When I am at work (university), I can not view YouTube videos or video streaming from news sites such as cnn mobile on my ipod touch 2g.
    <m.cnn.com/videos.jsp?ckey-cnn)06#__1_>
    When I called Apple support, they had me reset-restore. I still had the problem. I went to the Apple store Genius bar and the problem no longer existed, the videaos downloaded and played from both sites!
    But at my diner and at work, I get the message, "This movie could not be played" in a popup box with an OK button. The same message appears if I use the YouTube application. I click on any video, and the same popup appears. In Cnn the popup is preceded by a shaded capital Q that looks like the blue Quicktime Q; in Youtube the pupup is preceded by a YouTube icon in gray with the "Tube" surrounded by the rounded rectangle, their icoon...
    At the Apple store the popup never appeared, and the videos downloaded and played.
    I have no trouble playing movies I have downloaded from iTunes.
    I did not have this problem when I initially got my iPod Touch, and I think it appeared after one of the last two system upgrades, but I am not sure.
    I am curious that it the problem happens at two places, my diner and at work.
    The speed of my wireless work network, as judged by the ipod app speed test is 9915 kbps download and 6971 kbps upload, so plenty fast.
    The first time I noticed this issue was with the application "At Bat Lite" which also won't play video highlights at work.
    I do not have WiFi at home
    Any thoughts about what would cause this lack of functionality apparantly only at some networks but not others?
    Oh, one more piece of data: at work a Macbook will play YouTube both on ethernet and using wifi...
    Thanks for any thoughts or suggestions,
    Paul

    It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
    Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
    Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
    Weird...
    Paul

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • Since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.  any suggestions?

    since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.

    To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
    Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • How can I set Firefox 8.0 to accept 3rd party cookies ONLY from selected sites but NOT from any other sites?

    I do not like to accumulate 3rd party cookies and would simply not check the Accept 3rd Party Cookies box in Preferences. BUT in order to use my bank's web page I have to accept 3rd party cookies from a separate site that manages some of their transactions (like paying bills). This means I have to accept 3rd party cookies and then delete them by hand OR I have to check the accept box each time I use the bank's website and then uncheck it when I am done.

    Thanks, but that is not what I was trying to do. I do not want to block cookies from a single site. I do not want to block all 3rd party cookies.
    What I want to do is ACCEPT 3rd party cookies only from ONE site but NOT from any other site.

  • I upgraded to lion today and just realized I am not receiving any mail. I can send out but not receive. i'm using a POP Road Runner account. Any help appreciated.

    I just upgraded to Lion today and realized I'm not receiving any mail. I can send out but not receive. I am using a POP server Road Runner acct. Any help would be appreciated.

    Try Mail->Window->Connection Doctor.  If there is a problem reported, try:
    Open Mail->Preferences and check your settings.
    If you still have a problem, Copy your settings (screen capture ⇧⌘4), delete account, and re-setup account

  • When uploading videos to iWeb, the video screen gets cut off at the top. It only happens in Firefox, but not in Safari.

    When uploading videos to iWeb, the video screen gets cut off at the top. It only happens in Firefox, but not in Safari. Has anybody else had this problem?

    I'm using pure HTML5 for mobile websites although you need to provide an OGG file for Firefox. See the movie page on this site...
    http://mobile.ezmacwebdesign.com/
    If you don't have an iPhone, grab the browser handle and drag it to the left to reduce the width to see how it responds to mobile devices' fixed width browsers .
    This will play in all modern browsers and on mobile devices. You can use QuickTime Pro for the OGG or OGV conversion or get the freeware Miro Video Converter...
    http://www.iwebformusicians.com/Website-Movie-Video/Easy-Movie-Player.html
    If you only want to upload an MP4, you can use a flash fallback player and this will cover Firefox and those geriatrics that still use older versions of Internet Explorer....
    http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
    http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
    http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html
    If you use any of the four fallback players above, take advantage of the fact that you can add a poster image and stop the video file from preloading. This makes for a faster page download time.
    You can also achieve this using HTML5 by adding preload="none" and poster="URL to the poster image" into the code shown on this page...
    http://www.iwebformusicians.com/Website-Movie-Video/HTML5-Video.html

  • How to show attributes only in query panel but not in Add fields.

    Hi,
    Jdev - 11.1.1.7.0
    I have a requirement where I need to show attribute only in search panel but not in Add Fields list which is available in advanced section.
    Thanks for your time and help.
    Regards,
    Dileep.

    Hi,
    Is it really possible implement this kind of scenario, I could not find any property to disable the attribute only 'Add Fields' but not in query panel.
    Please some one confirm me this behavior.
    Thanks,
    Dileep.

  • Why item button only show #APP_IMAGES# image but not #WORKSPACE_IMAGES#?

    Hi All, I have a item button with Button display attributes - Style as Image. I don't know how come it can only display #APP_IMAGES# image but not #WORKSPACE_IMAGES# image. Please help... Thank you in advance. :)
    Chris

    Hi All, I have a item button with Button display attributes - Style as Image. I don't know how come it can only display #APP_IMAGES# image but not #WORKSPACE_IMAGES# image. Please help... Thank you in advance. :)
    Chris

  • Permanent capture only 4 audio tracks but not 16?

    everytime i capture ...the log n capture audio tracks will automatically make all 16 tracks on....i have to manually shift off rest 12 tracks...any solution to permanent capture only 4 audio tracks but not 16?

    this is my picture showing...icant find the audio button...>.<....plz correct me if im wrong..
    [URL=http://imageshack.us][IMG]http://img137.imageshack.us/img137/5505/picture1ye5.png[/IMG][/URL]

Maybe you are looking for