Blue Yeti Pro Mic recognized but not working

I just recently got a Blue Yeti Pro and I can't get it to work on my Mac. There is no sound coming out of it. It only seems to work when I plug in the headphones. The red light is on, I've tried restarting my Mac, plugging and unplugging the mic, updated my OS, switching usb ports. Nothing seem to work! HELP!!!

WHEN IT'S SELECTED, THE INPUT VOLUME IS GREYED
THAT IS NOT YOUR PROBLEM, SOMETHING ELSE IS:
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled

Similar Messages

USB Devices Recognized but not working!

Having issues with working USB devices, but only some...??? Very confused. Here it is:
- 20gig ipod, ipod mini all recognized by apple system profiler and working (shows up on desktop) Through USB and firewire
- Canon Rebel XT (USB 2.0), Macally mouse(USB 1.0), RECOGNIZED in apple system profiler...but not working!!! Iphoto doesn't recognize a camera is connected and mouse not responding
The camera in mouse i tested in another mac and they are working.
If my logic board is cooked, then why would the ipods still work?? So, what is the problem???? PLEASE HELP
luc

Luke, many of the peripials such as cameras, printers, scanners, some will plug right in and work.
Others, need to plugged in and restart your computer,for them to work.
and last but not least some need there own drivers to operate correctly.
Those that need drivers normally come with an insallation CD for this purpose... Cheers...Don

Wireless Keyboard Recognized but not working.

I have a wireless keyboard that is recognized but for some reason will not work at all. No typing possible. Replaced the batteries etc.... nothing. Any suggestions?
Thanks
IMac G5 Mac OS X (10.4)

Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048

Mbox recognized but NOT working--input volume greyed

I have the original Mbox, which came with protools 6.4
I used to use the mbox with garageband and have no problem.
At some point I updated to OS 10.4.3
At about the same point I updated to protools 7.0
Now the Mbox appears in the pref list in garageband, but when I select it (as opposed to the built in mic) the input volume of the selected tracks goes grey and I the imput from the Mbox is not recognized in garageband.
I read all about how I should install the standalone core audio driver and uninstall protools. I have done this and still no luck. I have tried standalone core audio drivers versions 6.9, 7.0, and 7.3. No luck.
The only thing I can think is that I have not properly uninstalled protools 7.0. I did an uninstall of 6.4 with the CD, and since I don't have the CD from 7.0, I called digidesign and they are sending me one. In the meantime they emailed me a 'PT Cleaner' that is supposed to disable all PT related files.
All I can think is that I really need to wait for the PT 7.0 CD and run an uninstall with it, and then re-install the standalone core audio driver.
Could it be something else? I am at wit's end!
I repeat: THE MBOX APPEARS IN GARAGEBAND PREFS, BUT WHEN IT'S SELECTED, THE INPUT VOLUME IS GREYED AND NO SIGNAL GOES INTO GARAGEBAND.
I HAVE TRIED EVERY VERSION OF STANDALONE CORE AUDIO. HELP!!!!
(ps--i don't have an intel mac)
Powerbook G4 1.33 Mac OS X (10.4.3) 2004

WHEN IT'S SELECTED, THE INPUT VOLUME IS GREYED
THAT IS NOT YOUR PROBLEM, SOMETHING ELSE IS:
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled

Adobe Acrobat X Pro Is Installed but Not Working

I installed Adobe Acrobat X Pro about a year ago. It has never worked, and I'm just now getting around to trying to fix it. When I try to open a PDF document with the program, it brings up a window that asks if I'll allow the program to make changes to my computer. I click "yes," and the window goes away, but then absolutely nothing happens, the document never opens, and I have to open it with Adobe Reader instead.
I'd like to be able to use the program that I paid for.
What can I do?
Thanks.

you should open the directory where adobe x pro was installed. find Acrobat.exe, right click it>click "run as administrator".
if that fails, fun the acrobat cleaner: http://labs.adobe.com/downloads/acrobatcleaner.html
restart your computer
reinstall acrobat x pro.

External display recognized but not working?

So, I've got kind of a weird problem.
Whenever I connect my iMac (through the Thunderbolt port) to my 32" RCA HDTV via a displayport to HDMI adapter, it shows on my iMac that there is a display connected (TTE HDTV), but my TV isn't recognizing it. I have tested the port/TV using my Windows laptop with a (native) HDMI port and there have been no problems.
I would think it was the cord I bought, except that my iMac recognizes an external display. It doesn't seem to be the TV's fault, and I've tried every resolution setting.

Yeah I have been having the same problem. When I'm looking at the Display Settings, it comes up with Samsung 1080 when its connected, however the tv doesnt recognize it. And if i unplug the HDMI cable from the adapter, the Tv options go away. There must be some sort of TV setting maybe? I am also using a passive adapter.

I purchased a new computer and also Adobe acrobat XI Pro. It has not worked properly. I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number. What can I do?

I purchased a new computer and also Adobe acrobat XI Pro. It has not worked properly. I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number. What can I do?

Hi,
Have you tried the help documents below:
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error
In case of any other error message, please specify.
Regards,
Sheena

When connecting my ipod nano (5 gen) I get an error messege saying that it was recognized but not properly. Ive tried everything the support site says and it still not working. What do I do now?

When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?

This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Blu Yetti Pro Microphone Questions

Hey Guys
i just want t pick your brains for a bit i have Blu Yetti Pro USB microphone it works totally fine i can record in logic and garageband fine but my questions are
1. if i go to Launchpad>Other>Audio MIDI Setup sometimes the microphone is stuck on mute even though the actual microphone is not muted the only way i can resolve this is by unplugging the usb out of the microphone then replugging it back in and also the microphone won't pickup any sound sometimes unless i go to the input tab and move the input volume slider left to right.
2. also in Audio MIDI Setup the settings are the standard which is 44100.0 Hz at 2ch-24bit integer i notice in Logic Pro X if i change that to say 96000.0 Hz when i live record in logic Pro X my voice comes out real deep or Extreme Latency(Delay).
anyways i know these aren't real important questions i just thought if a fellow Helper could shed some light on these questions lol
if you need any more info let me know ill respond fairly quickly
thank you for your time guys and girls

After doing some research, found that it is possible to get rid of original SuperDrive with no issues. And usually all Blu-Ray drives are plug and play and require no driver.
The Blu-Ray is set region code by software just like with a DVD drive and with limited number of times you can change between regions.
Best Blu-Ray players are LG as they have the least problems of compatibility with the Mac Pro (unlike the Pioneers).
Thanks

Blue Yeti Pro Microphone robot voice

For some reason when I record using my Blue Yeti Pro microphone, it's a lot of times a robot voice. I really can't figure out what's the problem, no matter what USB wire I use. I often record my screen using Screenflow, it records it like a robot voice, since a few days, before it didn't do that. I've tried connecting the USB to my keyboard and my mac, it doesn't work, sometimes it won't even output or input anything. Also when I skype or use teamspeak, other say that after a while I sound like a robot, this really bugs me, I just recorded over 3 hours for youtube, after I had finished, I realised my voice was like a robot all the time, I raelly get ****** of this.

Hi Tom,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back

Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

Greetings Kwnez
I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
What I'm saying is "Are we on the same Page"

[solved] mic on OSS4 not working

mic on OSS4 not working
I moved from ALSA to OSS4. Sound quality is (or it's my imagination) better. But microphone not working. I use Skype, Audacity, ossrecord... still nothing. Ossinfo show three record devices, ossmix - all record volume up , no mute. Ossrecord -d device(1,2,3) records only silence.
Sorry for my language, thanks for any help ...
Last edited by tommykr (2009-03-15 16:19:01)

It too me a good while and lots of trial and error to get recording working with oss, you need to set the mode to input on the recording sources (maybe you are using and HD Audio codec, you didn't say). Also if you have an internal mic and you are trying to use and external one you may need to adjust the recording volume of the internal one to zero otherwise the two will interfere.
Here's my settings on ossxmix (yours will probably be different)
Also while testing try to keep your payback volume low because you may set things in a way it will have positive feedback and you will get a very loud playback volume.

My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

Tony,
My first thought is to make sure that you are actually logged in using the same AppleID on both devices. Many folks share one AppleID for their family's iTunes Store account yet use another personal AppleID to log into iMessage settings and iCloud settings.
To confirm that the AppleID and password you are using is correct I would suggest visiting http://icloud.com and attempting to login there. If you get in, then you know for sure that that is a valid AppleID/password pair.
If that still doesn't reveal the issue then I would try opening Notes app on both iPhones, and then typing your password out where it can be seen clearly. This may reveal if your are typing it differently due to iOS 8 changes in the shift key indicator, or possibly that a screen protector or case is causing your touches to not register the same on both devices.
I hope these suggestions help.

My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

I have the same issue.
The magsafe goes orange for about 20 seconds, the battery shows 0% then it goes to a black X indicating no battery installed.
With a new battery the same happens, although it can run on battery but does not charge.
It runs fine on mains power, the green light is always lit.
I have tried several things so far:
1. Cleaned the magsafe contacts on cable and macbook
2. Reset SMC and PRAM
3. Installed latest battery update
4. Tried new battery
5. Put old battery in fridge for an hour
I work in IT and am fairly confident taking it apart, what should I try next?
Some people recommend a new battery connector, which doesn't seem to make sense as the battery has never been removed before. Also some people say it will need a new logic/motherboard.
Any experts here managed to sucessfully fix one of these?

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

Blue Yeti Pro Mic recognized but not working

Similar Messages

Maybe you are looking for