Blueberry iBook and Epson projector..

I know this is similar to another post but my iBook is older and the projector is different. The only cord I can find (my brother donated this computer to my classroom) is a short 6" clear cord with what looks like a yellow A/V type end (female) and a round (male) pronged (sorry-can't think of what its called) end. Each ends says "out". Is there another cord??

Sorry but the Blueberry iBook does not have any type of video output. Therefore there is no way to connect it to a projector.

Similar Messages

Blueberry ibook RAM & Apple docs

I also have an original blueberry ibook and would like to upgrade the RAM. However, there seems to be two conflicting pieces of information on Apple's web site:
http://docs.info.apple.com/article.html?artnum=14870
The first listing for an ibook (about half way down the page) says PC66 up to 288MB.
http://docs.info.apple.com/article.html?artnum=302333
The listing for the original ibook (at the bottom of the page says this model can also use PC100 memory, such as M9089G/A - 512MB
I have read some of the other postings which suggest the first doc is incorrect and that it will take 512MB. Please help and confirm.
Having upgraded the RAM I intend to also upgrade from Mac OS 9.2.2 to 10.3.9. Does anyone know if the 366MHz processor will handle this?
Thank you

You can find the firmware version by running Apple System Profiler and looking in the ROM field (I believe that is the name I haven't used OS 9 in a long time).
PC100 will operate at 66 MHz which is the clock speed of the iBook. Therefore you can use PC100.
A lot of PC133 will also operate at 66 MHz. Therefore you can use PC133. But some PC133 devices will not operate at 66 MHz. That is why you need to buy the RAM from someone who offers a lifetime warranty.

Why epson projectors work perfectly in MacOS X Lion and not in Windows 7 with bootcamp?

Hi,
Irecently bought the new Macbook Air 2011, which came with the Intel Graphics HD3000 video card, as many of you, I was forced to install windows using bootcamp software, everything worked fine, till I tried to connect it to theprojector in office, which is a Epson PowerLite S5+.
Duringthe configuration, which normally is just plug the VGA adapter to the minidisplay port and everything works, this time was different, the projector orthe Macbook air doesn't recognize each other, for same reason. Doing some researchon the internet I've discovered that there are some issues between new Macbook’svideo cards which are Intel Graphics HD and some projector.
Nowthe question is, why the video card driver recognize most of the projectors inMacos x Lion and in windows 7 64 doesn't work?, is there any driver parameterto modify in order to make them work?, when Intel will release a fully operatingdriver for windows 6 64 that work with all projectors?.
Ithank you every one, who help me to solve this incompatibility of software.
Sorryfor my English, but I'm not a native speaker.

I recognize your problems and posted the same question. Very weird. Apple HELP!!

Connecting iBook G4 to projector

I want to connect an iBook G4 to an Epson projector. How do I do it? The projector has a blue multipin socket as standard and a plug in card, presumably for wireless networking. My Pogue manual does not mention projectors at all. I suspect I have to change the output from LCD screen to something else, but I can't find any way of doing this. Any help gratefully received

I can't believe this. This reply is actually in the manual, if I hadn't panicked at the sight of the connector! I am most grateful for the patient and factual manner of your reply. Best wishes, Terry

Connecting iBook to a projector

I want to connect an iBook G4 to an Epson projector. How do I do it? The projector has a blue multipin socket as standard and a plug in card, presumably for wireless networking. My Pogue manual does not mention projectors at all. I suspect I have to change the output from LCD screen to something else, but I can't find any way of doing this. Any help gratefully received.
Message was edited by: Terence Harvey

You may get faster service by reposting your query in the iBook G4 forums here:
http://discussions.apple.com/category.jspa?categoryID=131
The one you're in now is for the G4 mini-tower so the hardware is quite a bit different.

Restoring original Blueberry iBook G3 with Mac OS 8.6

I recently got a Blueberry iBook G3 and need help restoring it. It has all original documentation and CDs. It has 160 MB of RAM and a 3 GB hard drive. It doesn't have an AirPort card. When I try to restore it it boots and loads to a preloaded desktop (on CD) and then shuts down without giving me any messages or options. I want to install the original software and then upgrade to Mac OS X.

I don't have another battery or a charger (only one). Anyway, it works with Mac OS X (i installed it and it worked), but I want the original software on it. Also, the logicboard is working correctly

Macbook MiniVGA Display port Epson Projector Issues "Not Supported"

I have been using my Macbook OSx 10.8.5 with a Rocketfish Mini Displayport to VGA adapter (RF-AP307) connected to an Epson Projector (Powerlite83plus) for 3 weeks and just the other day a blue screen appeared on the projector stating that the computer is 'Not Supported'.
Actions I have already tried:
- turned on and off mirroring
- changed the refresh rate
- unplugged VGA adapter and restarted the computer
- attempted to install firmware update for MiniVGA display port following directions located here: http://support.apple.com/downloads/_Mini_DisplayPort_to_VGA_Firmware_Update (update failed because VGA adapter not found)
Anyone having similar issues and have some additional solutions? Need a solution fast, if I need to buy another VGA adapter I will but would rather not have to spend the money again...
Thanks

"- attempted to install firmware update for MiniVGA display port following directions located here: http://support.apple.com/downloads/_Mini_DisplayPort_to_VGA_Firmware_Update (update failed because VGA adapter not found)"
That update is for the Apple branded adapter, not the Rocketfish adapter.
I have the same adapter as you and have had no problems. That doesn't really mean anything other than the part does work with many types of projectors. Yours could have failed, though. Does it work on any other display or projector?

Epson Projector not working as second monitor

Does anyone know how to set up an Epson Projector to a Macbook Pro? I have a mini display to VGA adapter. We are running Bootcamp and Windows XP Pro. You can make the 2nd screen in the display properties in a continuous page. So you can see on the projection but you can not make the whole desktop a projection. So it will work as a continuous desktop but not as a primary desktop.
Any help is appreciated!

See this post. I think it will help in your situation also.
http://discussions.apple.com/thread.jspa?threadID=1891342&tstart=0
For some reason the 'Display Properties' does not always 'stick' and often does not do what you are trying to do. (at least that is what I have found) so going to the advanced settings and creating a 'scheme' has fixed issues similar to this.
Kevin

Distortion when connecting iBook to Sony Projector

I have an iBook G4, 1Ghz, 10.4.11, 1.25GB RAM, Keynote '08
When I connect the iBook to any TV using composite, S-video, or 15-pin VGA I get a crystal clear picture. But when I use it at work with a Sony VPL-CX86 projector the picture is distorted on the screen. There is a slight distortion (scratch marks) using the 15-pin connection, and a terrible distortion (flowing lines of "noise") using composite and s-video.
I cant imagine that there is something wrong with the iBook since it works fine when connected to a TV, but Im wondering if there is? Or is there something I can do with the projector to fix the picture?
Thanks for any input!
Message was edited by: CPeltz

OK... problem solved! But new questions arise.
I found that when my iBook was plugged in to the AC adapter, it created "noise" on the projector picture. But when I connect the iBook to the projector and use battery power, the picture is crystal clear. Weird, but now I know that something in the power supply causes the picture to distort... Now I just charge up the iBook before I need to use it.

MacBook Air EPSON Projector audio

I have a MacBook Air and recently lost all sound. When I check under system preferences, Sound Output, it says I am connected to an EPSON Projector Audio. Any ideas what happened and how to remove

Hi everybody
The MacBook Pro folks have the same issues. Here is a similar discussion:
https://discussions.apple.com/thread/2784143?start=0&tstart=0
I have put some of my problems up there as well. For me nothing worked. Nobody in two Apple stores could help. VGA adapter did not work at all, regardless of the order of connecting cable and adapter. Tried two more adapters and two more cables. Mini-Displayport to DVI -Adapter did also not work. Everything works well under MacOS. Must indeed be something with the Thunderbolt/Mini-Displayport combination port and the Windows driver.
Any idea how to report this to Apple?
JK

Help, 27" iMac won't detect Epson projector

Hello,
I'm trying to connect a 27" to Epson projector via Mini Display to VGA adapter connected through VGA cable to the projector (that works fine with other pc)...the iMac doesn't detect it....
Thanks

This has been a big pain. I got the machine back, started it at the shop and it "seemed" ok. When I got it home, after 30 minutes or so, the same problems came back. Another call to applecare, and a new case number was issued to replace the hard drive. New HD in, got the machine home, and the mouse wouldn't work! I could move the cursor, but not select anything. Sometimes during the restarts I could select things, the next time I couldn't, sometimes I could on one user account and not on another. New call to applecare, new case number, many things tried, but ended up re-installing the OS. So far it seems to work okay, BUT there is something weird going on with Mail.
As soon as it is started it basically consumes all the system memory. I can watch the available memory disappear in activity monitor where it says Mail is using nearly 100% of the CPU. If I go in to preferences-advanced in Mail and disable the account, it stops eating up resources.
Any clues to what is going on??
thanks
Message was edited by: Scott Fairbairn

Macbook/Epson projector set up

Does anyone know how to set up an Epson Projector to a Macbook Pro? I have a mini display to VGA adapter. We are running Bootcamp and Windows XP Pro. You can make the 2nd screen in the display properties in a continuous page. So you can see on the projection but you can not make the whole desktop a projection. So it will work as a continuous desktop but not as a primary desktop.
Any help is appreciated!

Seems likely to be a Boot Camp issue (you might confirm that the projector will work in mirroring mode when booted into the Mac OS).
In that case, you might also post your query in the Boot Camp forum:
http://discussions.apple.com/category.jspa?categoryID=237

G4 iBook and extended desktop

I am using my G4 iBook to connect to a projector for presentations and have noticed that MS PowerPoint 2004 allows projecting of the current slide whilst I can see next and previous slides on my iBook screen. However in order to do this I have to switch off monitor mirroring. However in order to do this I need extended desktop, which it would appear that my G4 iBook does not have!!! Is there any way of getting an extended desktop on my iBook in order to use this functionality?

On an iBook, you can't.
One of the things Apple does to distinguish the 'consumer' line (iBooks and iMacs) from the 'professional' line (PowerBooks and PowerMacs) is that it prevents dual displays on the consumer line. We know from the video chips that Apple uses, that they are capable of dual display.
There does exist a hack that undoes the lockout that Apple wrote into the consumer line, but Apple is very clear that installing that hack will void your warranty and possibly damage the computer. This damage is (from what I have been able to glean) from overheating, especially from users that close their laptops while using an external monitor, as venting heat through the topcase is part of the design.

I am using an epson projector to present images downloaded to a thumb drive. I renames the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2

I am using an epson projector to present images downloaded to a thumb drive. I rename the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2 ... 10,11 etc. How can I export and rename starting with 001?

The projector may actually be processing a 3 digit number in numerical sequence. Have you tried your export/collection in order sequence starting with 101? Assuming you have fewer than 899 images you should be OK. (I had to fiddle with export sequence for a display frame which used the file date and time for sequence!)

Epson projector does not recognize mac pro.

Epson projector does not recognize mac pro. I have a new mac and it only shown the epson when I check mirror on monitors preferences. The former mac use to be recognized as soon as it was plugged. The epson projector works well connected to a tv receiver.
Any help, please?

Please checj if your epson compatible with your mac pro or not. or you can let me know your Epson Model no., so i can check that for you!!!

Blueberry iBook and Epson projector..

Similar Messages

Maybe you are looking for