Bluescreen after plugging an external display into my MBP 2012 under Windows 7 6 bit

After installing the windows updates for windows 7 64bit on my bootcamp partition, i always get a blue screen, when I plug in my external display into my mbp 2012. Before installing those windows update, i didn't have this problem. Also, while running osx the external display works perfektly.
The error message says something about a igdkmd64.sys file beeing responsibe for the bluescreen. I've tried to install the original bootcamp drivers and the newest intel graphics driver, neither resulted in a change. Thank you for your help and pleases excuse my bad english ;-)

Hi,
read the documentation:
http://www.oracle.com/pls/db112/to_pdf?pathname=install.112/e24169.pdf
and you will find multiple errors, you probably did.
Especially the part on preparing storage.
Regards
Sebastian

Similar Messages

Problem: Plugging an LED-display into my MBP 15"

Hello!
I recently bought a BenQ G2222HDL 21.5" LED Monitor and I have encountered some problems when trying to connect it to my MBP via the Mini DisplayPort to DVI-adapter.
My MBP (spring 2010) won't find the display but when I try to connect the display to my brothers MB (spring 2009) it works immediatley and it finds the display in no time.
Is there any differences between the Mini DisplayPort on older an newer models of MB?
Have anyone out there encountered the same problem? Anyone got any suggestion on how i can make it work?
Thanks!

When I have to re boot to get a screen that I can see, it gives me a error report, but unfortunately I don't have a apple store anywhere close by, otherwise I would just drop off and see how screwed I would be, since I have no apple warranty nor apple care ;-( !

What are the names of the ports I have in my Macbook Pro to plug an external monitor into?

What are the names of the ports in my MacBook Pro that I can plug an external monitor into?

You have Thunderbolt or Mini DisplayPort. If you know which external display you want or you already have it, look at the ports it has got and get a Mini DisplayPort adapter for it. There are Mini DisplayPort adapters for DVI, VGA and HDMI.
Most external displays have DVI, VGA or HDMI. If you can use HDMI, use it, because it will provide much better quality. See > http://support.apple.com/kb/HT4241?viewlocale=en_US&locale=en_US
Mini DisplayPort adapters can be used with Thunderbolt

Is it possible to plug an external camera into 1/8" a/v jack on my iPhone a

Is it possible to plug an external camera into 1/8" a/v jack on my iPhone and view/record live video
I am constantly installing surveillance cameras at various locations; I'd like to be able to use my iPhone as the live view device (as opposed to a larger portable DVD player).
Is this possible, will the iPhone accept a video signal via the 1/8" jack like the external microphone, or even through the service dock
In short I want the composite cable to provide a VIDEO IN, and a video out
If this has already been developed please point me in the right direction. If not, any idea on how to develop the APP/Coding/Hardware, would also be of great help. Thank you in advance for you help.

I am looking to do the same i have ben looking on the net the last few months but have found nothing it has to be possible if you can play video on a tv you should be able to record. Maybe a developer would be interested in developing a app.

If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

How much time ipod needs to restore after plugging with external power?

how much time ipod needs to restore after plugging with external power?

Restore? Do you mean power on after it's been drained for awhile? It depends how long it's been dead. Sometimes it can take awhile (10-20 minutes maybe more) in some cases.

How can I use an external display with my MBP lid closed and disconnected to power?

I know that I can use an external display when my MBP lid is closed and it is connected to power. I was wondering why it does not work when the power cable is removed.
I only use an external display when I am at home so my MBP acts like a Mac Pro or Mac Mini in that way, but it is not good to leave the battery charging constantly on a MBP so I want to disconnect the power and use external display and have the lid closed. Is this possible or do I have to leave my lid open when running on battery power?

I'm plugged into my wall socket at least 90% of the time - probably more. I always make sure that I take my MBP off mains about once every two weeks and let it run down to about 30-40% and then plug it back up. This keeps the ions flowing and the battery healthy. My MBP will be one year old on March 20, 2013, and my battery health is still at 99%. I run in clamshell mode most of the time now - since I bought a 27" Apple Thunderbolt Display. Only occasionally am I off mains - and then because I'm exercising my battery, usually.
Don't worry about running of mains most of the time - just be sure and unplug about once every two weeks (or twice a month) and let your battery dip to the 30-40% mark and you'll be fine.
Good luck,
Clinton

After Lion Upgrade, External Display ( DVI ) Not detecting Monitor.

This problem is on my Macbook Pro 17" 2006 (ish) intel core 2 duo.
I have allways used the display port with a DVI cable connected to a DVI port on an external monitor to extend my desktop.
For some reason after upgrading to Lion, I can't detect the external display. If I use an adapter ( Display connector to VGA ) and connect into the VGA input on the monitor, all works fine.
I did connect to the DVI port and left it connected for about an hour, then clicked the " Detect Displays " button, and it worked once. But after this it hasn't worked again.
I have changed the cable, and even the monitor, but it just won't detect..
Any Ideas ??
Dan

After ugrading to LION i can't use an external monitor or TV-screen.
Just purchased a Mini Displayport to HDMI adapter to connect my 13" macbook to an HDTV. I plugged the mini display to hdmi adapter into my macbook and then connected an hdmi cable from the adapter to the tv. the macbook display briefly went blue but then display the normal screen again.
I've search for the past few hours with no luck. I've tried to manually detect the display and nothing. I've tried 2 different TV's and both have the same result. I've tried rebooting my macbook also with no luck. Am I missing something? If I go into System Preferences > Displays there is no mirroring options or anything like that. It just shows the "Color LCD" option. Like I said, upon clicking the "Detect Display" button, nothing changes and no additional display are detected for use.
Any help would be greatly appreciated.

Libreoffice crashes after plug in external monitor

Hi
I have XFCE. When i plug in external monitor i get a crash from libreoffice. The message says that libreoffice has crashed and that documents will be saved. Has anybody got simillar issues?
LibreOffice error message:
Due to an unexpected errot, LibreOffice vrashed. All the files you were working on will be saved now. The next time LibreOffice is launched, your files will be recovered automatically.
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
[ 0.000000] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd80000 (usable)
[ 0.000000] BIOS-e820: 000000007dd80000 - 000000007dd8f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007dd8f000 - 000000007dde0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dde0000 - 000000007de00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 209 07/10/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7dd80 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
[ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c0093000] 93000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 7db5b000 - 7dd70000
[ 0.000000] Allocated new RAMDISK: 375e9000 - 377fd327
[ 0.000000] Move RAMDISK from 000000007db5b000 - 000000007dd6f326 to 375e9000 - 377fd326
[ 0.000000] ACPI: RSDP 000f93d0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7dd80100 00084 (v01 071009 XSDT1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: FACP 7dd80290 000F4 (v03 071009 FACP1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7dd80680 0CD1D (v01 K50IJ K50IJ209 00000209 INTL 20051117)
[ 0.000000] ACPI: FACS 7dd8f000 00040
[ 0.000000] ACPI: APIC 7dd80390 0005C (v01 071009 APIC1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7dd80430 0003C (v01 071009 OEMMCFG 20090710 MSFT 00000097)
[ 0.000000] ACPI: OEMX 7dd80470 00176 (v01 071009 OEMX1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: ECDT 7dd80620 00054 (v01 071009 OEMECDT 20090710 MSFT 00000097)
[ 0.000000] ACPI: DBGP 7dd803f0 00034 (v01 071009 DBGP1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: BOOT 7dd805f0 00028 (v01 071009 BOOT1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7dd8f040 00071 (v01 071009 OEMB1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: HPET 7dd8d3a0 00038 (v01 071009 OEMHPET 20090710 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7dd8f0c0 02024 (v01 071009 GMCHSCI 20090710 MSFT 00000097)
[ 0.000000] ACPI: ATKG 7dd912f0 08024 (v01 022008 OEMATKG 20080220 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7dd99b20 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMI detected: ASUS K50IJ
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007dd80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x0007dd80
[ 0.000000] On node 0 totalpages: 515335
[ 0.000000] free_area_init_node: node 0, pgdat c05add00, node_mem_map f6628200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3943 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2252 pages used for memmap
[ 0.000000] HighMem zone: 285878 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
[ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7de00000 (gap: 7de00000:80f20000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25472 r0 d23680 u2097152
[ 0.000000] pcpu-alloc: s25472 r0 d23680 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511307
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 8247040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007dd80)
[ 0.000000] Memory: 2027804k/2061824k available (3414k kernel code, 33536k reserved, 1408k data, 500k init, 1152520k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc05b6000 - 0xc0633000 ( 500 kB)
[ 0.000000] .data : 0xc04559d5 - 0xc05b5a00 (1408 kB)
[ 0.000000] .text : 0xc0100000 - 0xc04559d5 (3414 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.332 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.27 BogoMIPS (lpj=5984440)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003394] Security Framework initialized
[ 0.003400] AppArmor: AppArmor disabled by boot time parameter
[ 0.003424] Mount-cache hash table entries: 512
[ 0.003645] Initializing cgroup subsys cpuacct
[ 0.003661] Initializing cgroup subsys memory
[ 0.003672] Initializing cgroup subsys devices
[ 0.003674] Initializing cgroup subsys freezer
[ 0.003677] Initializing cgroup subsys net_cls
[ 0.003679] Initializing cgroup subsys blkio
[ 0.003723] CPU: Physical Processor ID: 0
[ 0.003725] CPU: Processor Core ID: 0
[ 0.003728] mce: CPU supports 6 MCE banks
[ 0.003736] CPU0: Thermal monitoring handled by SMI
[ 0.003740] using mwait in idle threads.
[ 0.006852] ACPI: Core revision 20110413
[ 0.016682] ftrace: allocating 15362 entries in 31 pages
[ 0.020055] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054743] CPU0: Intel Celeron(R) Dual-Core CPU T3000 @ 1.80GHz stepping 0a
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073448] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100011] CPU 1 irqstacks, hard=f54e8000 soft=f54ea000
[ 0.100014] Booting Node 0, Processors #1 Ok.
[ 0.100017] smpboot cpu 1: start_ip = 93000
[ 0.006666] Initializing CPU#1
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.196686] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203325] Brought up 2 CPUs
[ 0.203328] Total of 2 processors activated (7184.88 BogoMIPS).
[ 0.204206] devtmpfs: initialized
[ 0.204206] PM: Registering ACPI NVS region at 7dd8f000 (331776 bytes)
[ 0.204614] print_constraints: dummy:
[ 0.204682] NET: Registered protocol family 16
[ 0.204804] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.204807] ACPI: bus type pci registered
[ 0.204906] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.204910] PCI: not using MMCONFIG
[ 0.205140] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.205142] PCI: Using configuration type 1 for base access
[ 0.206964] bio: create slab <bio-0> at 0
[ 0.206964] ACPI: Deleted _OSI(Windows 2009)
[ 0.209160] ACPI: EC: EC description table is found, configuring boot EC
[ 0.209166] ACPI: EC: Look up EC in DSDT
[ 0.218122] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.221024] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.230152] ACPI Warning: Incorrect checksum in table [ATKG] - 0x84, should be 0xE5 (20110413/tbutils-314)
[ 0.230496] ACPI: SSDT 7dd993b0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.231045] ACPI: Dynamic OEM Table Load:
[ 0.231049] ACPI: SSDT (null) 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.231346] ACPI: SSDT 7dd99320 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.231894] ACPI: Dynamic OEM Table Load:
[ 0.231897] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.232248] ACPI: Interpreter enabled
[ 0.232260] ACPI: (supports S0 S3 S4 S5)
[ 0.232287] ACPI: Using IOAPIC for interrupt routing
[ 0.232319] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.234032] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.234035] PCI: Using MMCONFIG for extended config space
[ 0.243183] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.243546] ACPI: No dock devices found.
[ 0.243548] HEST: Table not found.
[ 0.243553] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.243848] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.244065] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.244068] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.244072] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.244075] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.244078] pci_root PNP0A08:00: host bridge window [mem 0x7de00000-0xffffffff]
[ 0.244094] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.244121] DMAR: Forcing write-buffer flush capability
[ 0.244147] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.244164] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.244174] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.244181] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07]
[ 0.244219] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.244232] pci 0000:00:02.1: reg 10: [mem 0xfe800000-0xfe8fffff 64bit]
[ 0.244330] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.244399] pci 0000:00:1a.0: reg 20: [io 0xd880-0xd89f]
[ 0.244468] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.244535] pci 0000:00:1a.1: reg 20: [io 0xd800-0xd81f]
[ 0.244604] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.244672] pci 0000:00:1a.2: reg 20: [io 0xd480-0xd49f]
[ 0.244753] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.244784] pci 0000:00:1a.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.244890] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.244896] pci 0000:00:1a.7: PME# disabled
[ 0.244932] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.244957] pci 0000:00:1b.0: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.245049] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.245054] pci 0000:00:1b.0: PME# disabled
[ 0.245086] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.245179] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.245185] pci 0000:00:1c.0: PME# disabled
[ 0.245218] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.245311] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.245317] pci 0000:00:1c.1: PME# disabled
[ 0.245356] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 0.245451] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.245457] pci 0000:00:1c.5: PME# disabled
[ 0.245494] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.245563] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
[ 0.245634] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.245702] pci 0000:00:1d.1: reg 20: [io 0xd080-0xd09f]
[ 0.245771] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.245839] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
[ 0.245920] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.245951] pci 0000:00:1d.7: reg 10: [mem 0xfe9fb800-0xfe9fbbff]
[ 0.246056] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.246062] pci 0000:00:1d.7: PME# disabled
[ 0.246091] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.246183] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[ 0.246345] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.246377] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
[ 0.246390] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
[ 0.246404] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
[ 0.246417] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
[ 0.246430] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
[ 0.246443] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb000-0xfe9fb7ff]
[ 0.246501] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.246506] pci 0000:00:1f.2: PME# disabled
[ 0.246598] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.246604] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.246610] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.246619] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.246718] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 0.246751] pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff 64bit]
[ 0.246873] pci 0000:02:00.0: supports D1
[ 0.246876] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.246883] pci 0000:02:00.0: PME# disabled
[ 0.246929] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.246935] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.246941] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.246950] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.247043] pci 0000:03:00.0: [1969:1026] type 0 class 0x000200
[ 0.247076] pci 0000:03:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.247094] pci 0000:03:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.247203] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.247210] pci 0000:03:00.0: PME# disabled
[ 0.247248] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.247254] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.247259] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.247268] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.247370] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.247376] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.247382] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.247391] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.247394] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.247397] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.247400] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.247403] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.247407] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode)
[ 0.247437] pci_bus 0000:00: on NUMA node 0
[ 0.247441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.247651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.247695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.247885] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.248174] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.259190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.259248] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.259304] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.259356] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.259410] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.259462] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.259517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.259572] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.259683] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.259697] vgaarb: loaded
[ 0.259699] vgaarb: bridge control possible 0000:00:02.0
[ 0.259809] PCI: Using ACPI for IRQ routing
[ 0.259812] PCI: pci_cache_line_size set to 64 bytes
[ 0.259912] reserve RAM buffer: 0000000000097c00 - 000000000009ffff
[ 0.259915] reserve RAM buffer: 000000007dd80000 - 000000007fffffff
[ 0.260058] NetLabel: Initializing
[ 0.260060] NetLabel: domain hash size = 128
[ 0.260062] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.260077] NetLabel: unlabeled traffic allowed by default
[ 0.260094] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.260103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.260108] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.270003] Switching to clocksource hpet
[ 0.273239] Switched to NOHz mode on CPU #0
[ 0.273288] Switched to NOHz mode on CPU #1
[ 0.277882] pnp: PnP ACPI init
[ 0.277905] ACPI: bus type pnp registered
[ 0.278057] pnp 00:00: [bus 00-ff]
[ 0.278061] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.278064] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.278069] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.278072] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.278075] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.278078] pnp 00:00: [mem 0x7de00000-0xffffffff window]
[ 0.278081] pnp 00:00: [mem 0x00000000-0xffffffff window]
[ 0.278186] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.278198] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.278259] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.278264] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278299] pnp 00:02: [dma 4]
[ 0.278301] pnp 00:02: [io 0x0000-0x000f]
[ 0.278304] pnp 00:02: [io 0x0081-0x0083]
[ 0.278306] pnp 00:02: [io 0x0087]
[ 0.278309] pnp 00:02: [io 0x0089-0x008b]
[ 0.278311] pnp 00:02: [io 0x008f]
[ 0.278313] pnp 00:02: [io 0x00c0-0x00df]
[ 0.278345] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.278357] pnp 00:03: [io 0x0070-0x0071]
[ 0.278371] pnp 00:03: [irq 8]
[ 0.278402] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.278441] pnp 00:04: [io 0x0060]
[ 0.278443] pnp 00:04: [io 0x0064]
[ 0.278449] pnp 00:04: [irq 1]
[ 0.278483] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.278536] pnp 00:05: [irq 12]
[ 0.278575] pnp 00:05: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.278586] pnp 00:06: [io 0x0061]
[ 0.278618] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.278628] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.278634] pnp 00:07: [irq 13]
[ 0.278667] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.278826] pnp 00:08: [io 0x0010-0x001f]
[ 0.278829] pnp 00:08: [io 0x0022-0x003f]
[ 0.278831] pnp 00:08: [io 0x0044-0x005f]
[ 0.278833] pnp 00:08: [io 0x0063]
[ 0.278836] pnp 00:08: [io 0x0065]
[ 0.278838] pnp 00:08: [io 0x0067-0x006f]
[ 0.278840] pnp 00:08: [io 0x0072-0x007f]
[ 0.278842] pnp 00:08: [io 0x0080]
[ 0.278845] pnp 00:08: [io 0x0084-0x0086]
[ 0.278847] pnp 00:08: [io 0x0088]
[ 0.278849] pnp 00:08: [io 0x008c-0x008e]
[ 0.278852] pnp 00:08: [io 0x0090-0x009f]
[ 0.278854] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.278856] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.278859] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.278861] pnp 00:08: [io 0x0800-0x087f]
[ 0.278863] pnp 00:08: [io 0x0400-0x041f]
[ 0.278866] pnp 00:08: [io 0x0500-0x057f]
[ 0.278869] pnp 00:08: [mem 0xfe9fac00-0xfe9facff window]
[ 0.278871] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.278874] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.278876] pnp 00:08: [mem 0xfed45000-0xfed89fff]
[ 0.278879] pnp 00:08: [mem 0xfed90000-0xfed90fff]
[ 0.278881] pnp 00:08: [mem 0xfed91000-0xfed91fff]
[ 0.278884] pnp 00:08: [mem 0xfed92000-0xfed92fff]
[ 0.278886] pnp 00:08: [mem 0xfed93000-0xfed93fff]
[ 0.278888] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.278891] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.278969] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.278973] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.278976] system 00:08: [io 0x0400-0x041f] has been reserved
[ 0.278979] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.278982] system 00:08: [mem 0xfe9fac00-0xfe9facff window] has been reserved
[ 0.278986] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.278989] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.278993] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.278996] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.278999] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.279002] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.279006] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.279009] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.279012] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.279016] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279083] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.279119] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.279178] pnp 00:0a: [mem 0xffa00000-0xffbfffff]
[ 0.279181] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[ 0.279236] system 00:0a: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.279239] system 00:0a: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.279243] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279292] pnp 00:0b: [mem 0xffc00000-0xffdfffff]
[ 0.279347] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.279351] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279412] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.279415] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.279417] pnp 00:0c: [mem 0xfec10000-0xfec17fff]
[ 0.279419] pnp 00:0c: [mem 0xfec18000-0xfec1ffff]
[ 0.279422] pnp 00:0c: [mem 0xfec38000-0xfec3ffff]
[ 0.279424] pnp 00:0c: [io 0x0250-0x0253]
[ 0.279427] pnp 00:0c: [io 0x0256-0x025f]
[ 0.279484] system 00:0c: [io 0x0250-0x0253] has been reserved
[ 0.279487] system 00:0c: [io 0x0256-0x025f] has been reserved
[ 0.279491] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.279494] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.279497] system 00:0c: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.279501] system 00:0c: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.279504] system 00:0c: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.279508] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279585] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.279641] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.279645] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279954] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.279957] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.279965] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.279967] pnp 00:0e: [mem 0x00100000-0x7ddfffff]
[ 0.279970] pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
[ 0.280081] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.280085] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.280088] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.280092] system 00:0e: [mem 0x00100000-0x7ddfffff] could not be reserved
[ 0.280095] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.280257] pnp: PnP ACPI: found 15 devices
[ 0.280259] ACPI: ACPI bus type pnp unregistered
[ 0.316954] PCI: max bus depth: 1 pci_try_num: 2
[ 0.317008] pci 0000:00:1c.5: BAR 15: assigned [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.317012] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.317014] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.317021] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.317026] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.317035] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.317037] pci 0000:00:1c.1: bridge window [io disabled]
[ 0.317045] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.317050] pci 0000:00:1c.1: bridge window [mem pref disabled]
[ 0.317059] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.317063] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.317070] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.317077] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.317086] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.317088] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.317094] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.317100] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.317124] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.317130] pci 0000:00:1c.0: setting latency timer to 64
[ 0.317141] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.317147] pci 0000:00:1c.1: setting latency timer to 64
[ 0.317156] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.317162] pci 0000:00:1c.5: setting latency timer to 64
[ 0.317171] pci 0000:00:1e.0: setting latency timer to 64
[ 0.317176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.317179] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.317181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.317184] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.317187] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.317191] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.317194] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.317197] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.317200] pci_bus 0000:03: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.317203] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.317206] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.317209] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.317211] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.317214] pci_bus 0000:04: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.317261] NET: Registered protocol family 2
[ 0.317339] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.317587] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.318048] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.318337] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.318341] TCP reno registered
[ 0.318344] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.318357] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.318534] NET: Registered protocol family 1
[ 0.318557] pci 0000:00:02.0: Boot video device
[ 0.318744] PCI: CLS 32 bytes, default 64
[ 0.318812] Unpacking initramfs...
[ 0.362878] Freeing initrd memory: 2132k freed
[ 0.363915] Simple Boot Flag at 0x51 set to 0x1
[ 0.364233] apm: BIOS not found.
[ 0.364425] audit: initializing netlink socket (disabled)
[ 0.364441] type=2000 audit(1312909012.363:1): initialized
[ 0.368688] highmem bounce pool size: 64 pages
[ 0.368694] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.378607] VFS: Disk quotas dquot_6.5.2
[ 0.378705] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.378834] msgmni has been set to 1713
[ 0.379068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.379105] io scheduler noop registered
[ 0.379108] io scheduler deadline registered
[ 0.379123] io scheduler cfq registered (default)
[ 0.379271] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.379334] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.379455] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.379513] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.379630] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.379688] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.379845] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.379852] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.379878] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.379881] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.379887] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.379912] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.379915] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.379921] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.380079] intel_idle: MWAIT substates: 0x2220
[ 0.380081] intel_idle: does not run on family 6 model 23
[ 0.380087] ERST: Table is not found!
[ 0.380103] isapnp: Scanning for PnP cards...
[ 0.737174] isapnp: No Plug & Play device found
[ 0.737249] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.927374] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.930998] i8042: Detected active multiplexing controller, rev 1.1
[ 0.934050] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.934091] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.934122] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.934155] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.934186] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.934296] mousedev: PS/2 mouse device common for all mice
[ 0.934388] rtc_cmos 00:03: RTC can wake from S4
[ 0.934524] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.934557] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.934588] cpuidle: using governor ladder
[ 0.934590] cpuidle: using governor menu
[ 0.934876] TCP cubic registered
[ 0.934879] NET: Registered protocol family 17
[ 0.934888] Registering the dns_resolver key type
[ 0.934915] Using IPI No-Shortcut mode
[ 0.935017] PM: Hibernation image not present or could not be loaded.
[ 0.935024] registered taskstats version 1
[ 0.939311] rtc_cmos 00:03: setting system clock to 2011-08-09 16:56:53 UTC (1312909013)
[ 0.939352] Initializing network drop monitor service
[ 0.939447] Freeing unused kernel memory: 500k freed
[ 0.939681] Write protecting the kernel text: 3416k
[ 0.939709] Write protecting the kernel read-only data: 1036k
[ 0.953922] udevd[54]: starting version 173
[ 0.977498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.019140] usbcore: registered new interface driver usbfs
[ 1.019176] usbcore: registered new interface driver hub
[ 1.049312] usbcore: registered new device driver usb
[ 1.050500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.050540] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.050563] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.050567] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.050604] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.050644] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.068233] SCSI subsystem initialized
[ 1.068335] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.068361] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 1.079182] libata version 3.00 loaded.
[ 1.080102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.080303] hub 1-0:1.0: USB hub found
[ 1.080309] hub 1-0:1.0: 6 ports detected
[ 1.080423] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.080445] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.080450] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.080461] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.080495] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.084638] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.084665] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 1.096705] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.097358] hub 2-0:1.0: USB hub found
[ 1.097365] hub 2-0:1.0: 6 ports detected
[ 1.097486] ahci 0000:00:1f.2: version 3.0
[ 1.097508] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.097565] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.097619] ahci: SSS flag set, parallel bus scan disabled
[ 1.097653] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.097657] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.097664] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.103903] scsi0 : ahci
[ 1.104030] scsi1 : ahci
[ 1.104126] scsi2 : ahci
[ 1.104218] scsi3 : ahci
[ 1.104495] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 43
[ 1.104500] ata2: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb180 irq 43
[ 1.104502] ata3: DUMMY
[ 1.104504] ata4: DUMMY
[ 1.163917] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.163984] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.163997] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.164113] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.164129] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.164178] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 1.164368] hub 3-0:1.0: USB hub found
[ 1.164373] hub 3-0:1.0: 2 ports detected
[ 1.164477] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.164486] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.164490] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.164500] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.164539] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 1.164699] hub 4-0:1.0: USB hub found
[ 1.164704] hub 4-0:1.0: 2 ports detected
[ 1.164787] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.164795] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.164799] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.164808] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.164848] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 1.165008] hub 5-0:1.0: USB hub found
[ 1.165012] hub 5-0:1.0: 2 ports detected
[ 1.165099] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.165107] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.165111] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.165122] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.165154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.165311] hub 6-0:1.0: USB hub found
[ 1.165316] hub 6-0:1.0: 2 ports detected
[ 1.165398] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.165408] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.165412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.165421] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.165450] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 1.165607] hub 7-0:1.0: USB hub found
[ 1.165611] hub 7-0:1.0: 2 ports detected
[ 1.165696] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.165704] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.165708] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.165717] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.165747] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 1.165914] hub 8-0:1.0: USB hub found
[ 1.165919] hub 8-0:1.0: 2 ports detected
[ 1.366705] Refined TSC clocksource calibration: 1795.499 MHz.
[ 1.366711] Switching to clocksource tsc
[ 1.386680] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 1.423359] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.425060] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.425379] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.425384] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.427244] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133
[ 1.427247] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.429377] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.429687] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.429691] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.431520] ata1.00: configured for UDMA/133
[ 1.431677] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0002 PQ: 0 ANSI: 5
[ 1.750027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.765044] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.765049] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.778146] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max UDMA/100
[ 1.794186] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.794191] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.807014] ata2.00: configured for UDMA/100
[ 1.810609] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX20 PQ: 0 ANSI: 5
[ 1.817797] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.817854] sd 0:0:0:0: [sda] Write Protect is off
[ 1.817857] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.817881] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.822707] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.822711] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.823032] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.836683] usb 6-2: new low speed USB device number 2 using uhci_hcd
[ 1.859083] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.859555] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.023721] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1
[ 2.023829] generic-usb 0003:13EE:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 2.023850] usbcore: registered new interface driver usbhid
[ 2.023852] usbhid: USB HID core driver
[ 2.650851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.258021] udevd[287]: starting version 173
[ 4.739711] asus_acpi: Asus Laptop ACPI Extras version 0.30
[ 4.739876] asus_acpi: unsupported model K50IJ, trying default values
[ 4.739878] asus_acpi: send /proc/acpi/dsdt to the developers
[ 4.816300] iTCO_vendor_support: vendor-support=0
[ 4.824448] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 4.824569] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
[ 4.824660] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.827238] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.827382] ACPI: AC Adapter [AC0] (on-line)
[ 4.828155] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 4.828165] ACPI: Sleep Button [SLPB]
[ 4.828230] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 4.831492] ACPI: Lid Switch [LID]
[ 4.831614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.831621] ACPI: Power Button [PWRF]
[ 4.865124] Linux agpgart interface v0.103
[ 4.921369] cfg80211: Calling CRDA to update world regulatory domain
[ 4.936814] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.936824] ACPI: Battery Slot [BAT0] (battery present)
[ 4.941752] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.941770] ATL1E 0000:03:00.0: setting latency timer to 64
[ 4.945788] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.945792] ACPI: Thermal Zone [THRM] (44 C)
[ 4.970466] ACPI: acpi_idle registered with cpuidle
[ 4.974411] Monitor-Mwait will be used to enter C-1 state
[ 4.974445] Monitor-Mwait will be used to enter C-2 state
[ 4.974469] Monitor-Mwait will be used to enter C-3 state
[ 4.974477] Marking TSC unstable due to TSC halts in idle
[ 4.975874] Switching to clocksource hpet
[ 5.032723] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 5.032822] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 5.033439] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 5.033728] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 5.105663] [drm] Initialized drm 1.1.0 20060810
[ 5.107962] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.107977] ath9k 0000:02:00.0: setting latency timer to 64
[ 5.142586] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.142593] i915 0000:00:02.0: setting latency timer to 64
[ 5.159185] ath: EEPROM regdomain: 0x60
[ 5.159188] ath: EEPROM indicates we should expect a direct regpair map
[ 5.159191] ath: Country alpha2 being used: 00
[ 5.159193] ath: Regpair used: 0x60
[ 5.168070] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 5.168078] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.168080] [drm] Driver supports precise vblank timestamp query.
[ 5.168129] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.191736] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.192424] Registered led device: ath9k-phy0
[ 5.192433] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf81a0000, irq=17
[ 5.288322] asus_laptop: Asus Laptop Support version 0.42
[ 5.288486] asus_laptop: K50IJ model detected
[ 5.288978] asus_laptop: Backlight controlled by ACPI video driver
[ 5.289084] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
[ 5.393429] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.393627] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.597755] psmouse serio4: ID: 10 00 64
[ 5.702553] elantech: assuming hardware version 2, firmware version 4.1.1
[ 5.738839] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 5.780864] fbcon: inteldrmfb (fb0) is primary device
[ 5.825826] Console: switching to colour frame buffer device 170x48
[ 5.831063] fb0: inteldrmfb frame buffer device
[ 5.831065] drm: registered panic notifier
[ 5.833323] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[ 5.834567] acpi device:38: registered as cooling_device2
[ 5.834817] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 5.834975] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.835272] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.835329] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.835420] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5.835458] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.840235] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input7
[ 6.069285] Linux media interface: v0.10
[ 6.088833] Linux video capture interface: v2.00
[ 6.097205] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 6.120085] input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8
[ 6.120179] usbcore: registered new interface driver uvcvideo
[ 6.120181] USB Video Class driver (v1.1.0)
[ 7.622339] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.907480] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.987363] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.044201] Adding 4213756k swap on /dev/sda5. Priority:-1 extents:1 across:4213756k
Xorg.0.log:
[ 25.092]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 25.092]
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[ 25.092] X Protocol Version 11, Revision 0
[ 25.092] Build Operating System: Linux 3.0.0-ARCH i686
[ 25.092] Current Operating System: Linux saso-laptop 3.0-ARCH #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011 i686
[ 25.093] Kernel command line: root=/dev/sda1 ro quiet
[ 25.093] Build Date: 08 August 2011 08:28:07AM
[ 25.093]
[ 25.093] Current version of pixman: 0.22.2
[ 25.093] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.093] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.093] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 9 18:57:17 2011
[ 25.215] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 25.248] (==) No Layout section. Using the first Screen section.
[ 25.248] (==) No screen section available. Using defaults.
[ 25.248] (**) |-->Screen "Default Screen Section" (0)
[ 25.248] (**) | |-->Monitor "<default monitor>"
[ 25.248] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.248] (==) Automatically adding devices
[ 25.248] (==) Automatically enabling devices
[ 25.303] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 25.303] Entry deleted from font path.
[ 25.339] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 25.339] Entry deleted from font path.
[ 25.339] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 25.340] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 25.340] Entry deleted from font path.
[ 25.340] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 25.340] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 25.340] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 25.340] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.340] (II) Loader magic: 0x822e4e0
[ 25.340] (II) Module ABI versions:
[ 25.340] X.Org ANSI C Emulation: 0.4
[ 25.340] X.Org Video Driver: 10.0
[ 25.340] X.Org XInput driver : 12.2
[ 25.340] X.Org Server Extension : 5.0
[ 25.341] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 9, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[ 25.341] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 9, Mem @ 0xfe800000/1048576
[ 25.341] (II) Open ACPI successful (/var/run/acpid.socket)
[ 25.341] (II) LoadModule: "extmod"
[ 25.358] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 25.373] (II) Module extmod: vendor="X.Org Foundation"
[ 25.373] compiled for 1.10.3.901, module version = 1.0.0
[ 25.373] Module class: X.Org Server Extension
[ 25.373] ABI class: X.Org Server Extension, version 5.0
[ 25.373] (II) Loading extension MIT-SCREEN-SAVER
[ 25.373] (II) Loading extension XFree86-VidModeExtension
[ 25.373] (II) Loading extension XFree86-DGA
[ 25.374] (II) Loading extension DPMS
[ 25.374] (II) Loading extension XVideo
[ 25.374] (II) Loading extension XVideo-MotionCompensation
[ 25.374] (II) Loading extension X-Resource
[ 25.374] (II) LoadModule: "dbe"
[ 25.374] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 25.387] (II) Module dbe: vendor="X.Org Foundation"
[ 25.387] compiled for 1.10.3.901, module version = 1.0.0
[ 25.387] Module class: X.Org Server Extension
[ 25.387] ABI class: X.Org Server Extension, version 5.0
[ 25.387] (II) Loading extension DOUBLE-BUFFER
[ 25.387] (II) LoadModule: "glx"
[ 25.387] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.411] (II) Module glx: vendor="X.Org Foundation"
[ 25.411] compiled for 1.10.3.901, module version = 1.0.0
[ 25.411] ABI class: X.Org Server Extension, version 5.0
[ 25.411] (==) AIGLX enabled
[ 25.411] (II) Loading extension GLX
[ 25.411] (II) LoadModule: "record"
[ 25.411] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 25.412] (II) Module record: vendor="X.Org Foundation"
[ 25.412] compiled for 1.10.3.901, module version = 1.13.0
[ 25.412] Module class: X.Org Server Extension
[ 25.412] ABI class: X.Org Server Extension, version 5.0
[ 25.412] (II) Loading extension RECORD
[ 25.412] (II) LoadModule: "dri"
[ 25.412] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 25.420] (II) Module dri: vendor="X.Org Foundation"
[ 25.420] compiled for 1.10.3.901, module version = 1.0.0
[ 25.420] ABI class: X.Org Server Extension, version 5.0
[ 25.420] (II) Loading extension XFree86-DRI
[ 25.420] (II) LoadModule: "dri2"
[ 25.420] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.428] (II) Module dri2: vendor="X.Org Foundation"
[ 25.428] compiled for 1.10.3.901, module version = 1.2.0
[ 25.428] ABI class: X.Org Server Extension, version 5.0
[ 25.429] (II) Loading extension DRI2
[ 25.429] (==) Matched intel as autoconfigured driver 0
[ 25.429] (==) Matched vesa as autoconfigured driver 1
[ 25.429] (==) Matched fbdev as autoconfigured driver 2
[ 25.429] (==) Assigned the driver to the xf86ConfigLayout
[ 25.429] (II) LoadModule: "intel"
[ 25.429] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 25.448] (II) Module intel: vendor="X.Org Foundation"
[ 25.448] compiled for 1.10.2, module version = 2.15.0
[ 25.448] Module class: X.Org Video Driver
[ 25.448] ABI class: X.Org Video Driver, version 10.0
[ 25.448] (II) LoadModule: "vesa"
[ 25.449] (WW) Warning, couldn't open module vesa
[ 25.449] (II) UnloadModule: "vesa"
[ 25.449] (II) Unloading vesa
[ 25.449] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 25.451] (II) LoadModule: "fbdev"
[ 25.451] (WW) Warning, couldn't open module fbdev
[ 25.451] (II) UnloadModule: "fbdev"
[ 25.451] (II) Unloading fbdev
[ 25.451] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 25.453] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 25.454] (--) using VT number 7
[ 25.461] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 25.461] drmOpenDevice: node name is /dev/dri/card0
[ 25.461] drmOpenDevice: open result is 9, (OK)
[ 25.462] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 25.462] drmOpenDevice: node name is /dev/dri/card0
[ 25.462] drmOpenDevice: open result is 9, (OK)
[ 25.462] drmOpenByBusid: drmOpenMinor returns 9
[ 25.462] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 25.462] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 25.462] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 25.462] (==) intel(0): RGB weight 888
[ 25.462] (==) intel(0): Default visual is TrueColor
[ 25.462] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 25.462] (--) intel(0): Chipset: "GM45"
[ 25.462] (**) intel(0): Relaxed fencing enabled
[ 25.462] (**) intel(0): Framebuffer tiled
[ 25.462] (**) intel(0): Pixmaps tiled
[ 25.462] (**) intel(0): 3D buffers tiled
[ 25.462] (**) intel(0): SwapBuffers wait enabled
[ 25.462] (==) intel(0): video overlay key set to 0x101fe
[ 25.462] (II) intel(0): Output LVDS1 has no monitor section
[ 25.462] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 25.480] (II) intel(0): Output VGA1 has no monitor section
[ 26.013] (II) intel(0): Output HDMI1 has no monitor section
[ 26.014] (II) intel(0): Output DP1 has no monitor section
[ 26.015] (II) intel(0): Output DP2 has no monitor section
[ 26.015] (II) intel(0): EDID for output LVDS1
[ 26.015] (II) intel(0): Manufacturer: LGD Model: 1e8 Serial#: 0
[ 26.015] (II) intel(0): Year: 2008 Week: 0
[ 26.015] (II) intel(0): EDID Version: 1.3
[ 26.015] (II) intel(0): Digital Display Input
[ 26.015] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 26.015] (II) intel(0): Gamma: 2.20
[ 26.015] (II) intel(0): No DPMS capabilities specified
[ 26.015] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.015] (II) intel(0): First detailed timing is preferred mode
[ 26.015] (II) intel(0): redX: 0.618 redY: 0.355 greenX: 0.335 greenY: 0.584
[ 26.015] (II) intel(0): blueX: 0.150 blueY: 0.102 whiteX: 0.313 whiteY: 0.329
[ 26.015] (II) intel(0): Manufacturer's mask: 0
[ 26.015] (II) intel(0): Supported detailed timing:
[ 26.015] (II) intel(0): clock: 72.3 MHz Image Size: 344 x 194 mm
[ 26.015] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 26.015] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
[ 26.015] (II) intel(0): LG Display
[ 26.015] (II) intel(0): LP156WH2-TLA1
[ 26.015] (II) intel(0): EDID (in hex):
[ 26.015] (II) intel(0): 00ffffffffffff0030e4e80100000000
[ 26.015] (II) intel(0): 00120103802213780a4e859e5b559526
[ 26.015] (II) intel(0): 1a505400000001010101010101010101
[ 26.015] (II) intel(0): 0101010101013e1c56a0500016303020
[ 26.015] (II) intel(0): 350058c2100000190000000000000000
[ 26.015] (II) intel(0): 00000000000000000000000000fe004c
[ 26.015] (II) intel(0): 4720446973706c61790a2020000000fe
[ 26.016] (II) intel(0): 004c503135365748322d544c4131004d
[ 26.016] (II) intel(0): EDID vendor "LGD", prod id 488
[ 26.016] (II) intel(0): Printing DDC gathered Modelines:
[ 26.016] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 26.016] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 26.016] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 26.016] (II) intel(0): Printing probed modes for output LVDS1
[ 26.016] (II) intel(0): Modeline "1366x768"x60.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 26.016] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 26.016] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 26.016] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 26.016] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 26.033] (II) intel(0): EDID for output VGA1
[ 26.566] (II) intel(0): EDID for output HDMI1
[ 26.567] (II) intel(0): EDID for output DP1
[ 26.568] (II) intel(0): EDID for output DP2
[ 26.568] (II) intel(0): Output LVDS1 connected
[ 26.568] (II) intel(0): Output VGA1 disconnected
[ 26.568] (II) intel(0): Output HDMI1 disconnected
[ 26.568] (II) intel(0): Output DP1 disconnected
[ 26.568] (II) intel(0): Output DP2 disconnected
[ 26.568] (II) intel(0): Using exact sizes for initial modes
[ 26.568] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 26.568] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.568] (II) intel(0): Kernel page flipping support detected, enabling
[ 26.568] (**) intel(0): Display dimensions: (340, 190) mm
[ 26.568] (**) intel(0): DPI set to (102, 102)
[ 26.568] (II) Loading sub module "fb"
[ 26.569] (II) LoadModule: "fb"
[ 26.569] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.584] (II) Module fb: vendor="X.Org Foundation"
[ 26.584] compiled for 1.10.3.901, module version = 1.0.0
[ 26.584] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.584] (II) Loading sub module "dri2"
[ 26.585] (II) LoadModule: "dri2"
[ 26.585] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 26.585] (II) Module dri2: vendor="X.Org Foundation"
[ 26.585] compiled for 1.10.3.901, module version = 1.2.0
[ 26.585] ABI class: X.Org Server Extension, version 5.0
[ 26.585] (==) Depth 24 pixmap format is 32 bpp
[ 26.585] (II) intel(0): [DRI2] Setup complete
[ 26.585] (II) intel(0): [DRI2] DRI driver: i965
[ 26.585] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 26.600] (II) UXA(0): Driver registered support for the following operations:
[ 26.600] (II) solid
[ 26.600] (II) copy
[ 26.600] (II) composite (RENDER acceleration)
[ 26.600] (II) put_image
[ 26.600] (II) get_image
[ 26.600] (==) intel(0): Backing store disabled
[ 26.600] (==) intel(0): Silken mouse enabled
[ 26.601] (II) intel(0): Initializing HW Cursor
[ 26.613] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.614] (==) intel(0): DPMS enabled
[ 26.614] (==) intel(0): Intel XvMC decoder enabled
[ 26.614] (II) intel(0): Set up textured video
[ 26.614] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 26.614] (II) intel(0): direct rendering: DRI2 Enabled
[ 26.614] (==) intel(0): hotplug detection: "enabled"
[ 26.614] (--) RandR disabled
[ 26.614] (II) Initializing built-in extension Generic Event Extension
[ 26.614] (II) Initializing built-in extension SHAPE
[ 26.614] (II) Initializing built-in extension MIT-SHM
[ 26.614] (II) Initializing built-in extension XInputExtension
[ 26.614] (II) Initializing built-in extension XTEST
[ 26.614] (II) Initializing built-in extension BIG-REQUESTS
[ 26.614] (II) Initializing built-in extension SY

Sorry for that. I had some issues with reproducing the problem. It seems that i can reproduce it only on fresh restart.
Last edited by Shark (2011-08-09 18:27:10)

Time Capsule acts weird when i plug my external drive into it

whenever i plug my toshiba canivo 1tb external drive into my time capsule it stops even letting me access the time capsule period in finder and in airport utility it keeps asking for the password even though i know its correct! works fine when drive isnt plugged in and ive been using it with the tc for a while it just started doing this tonight..any suggestions?

You must use a powered hub.. the internal power supply is not able to supply power to the USB drive.
Even if you have an external power supply on the USB drive you might still need a powered hub.. it is way under powered.

MSI UBO-30 External Slim Bluray Drive not recognized under Windows 8.1

Hi, does anyone here have MSI UBO-30? It is an external bluray drive from MSI. For some reason the drive is not recognized under windows 8.1 64 bit (it just says USB device not recognized). But works fine if plugged into Windows 7 machine. Anyone encounter the same issue?

Try upgrading your usb 3.0 drivers on your system. That worked with My GS70 Stealth Pro...

Running two displays from MBP Retina under windows

I'm looking at purchasing a MBP Retina 13". I have two external monitors that can accept HDMI and DVI (neither can do displayport). Some software that I run requires me to sometimes boot into windows. Under windows 7, can I output a DVI signal from each of my thunderbolt ports? Do I just need to run two mini-displayport to DVI adapters? Or is not that simple? (both external monitors are 1900x1080)

Hi,
read the documentation:
http://www.oracle.com/pls/db112/to_pdf?pathname=install.112/e24169.pdf
and you will find multiple errors, you probably did.
Especially the part on preparing storage.
Regards
Sebastian

Plug 24" LED Display into Mac Pro, Still Charge MacBook Air?

Just set up my Mac Pro using the 24" LED Display I used to use with my MacBook Air. With the USB and Mini DisplayPort now plugged into the Mac Pro, could I still plug the MagSafe power cable into the Air to charge it in a pinch, or is there any reason I'd need to unplug the Mac Pro connection first?
(Rather be safe than sorry...)

Thanks much! Unless anyone cares to chime in with an opposing view, I'll be using the 24" as a spare MagSafe to recharge the Air when I'm at home...

I've plugged my ipod classic into my mbp 13 inch with retina display but I can't sync or charge it ?

I recently purchased a macbook pro 13 inch with retina display, am having a great time coming over from Windows! I went to try and sync my ipod today for the first time but unfortunately I cannot charge or sync my ipod when connected. I'm using the standard connector that came with my ipod classic and tried both usb ports on the macbook but have had no luck. I tried looking for the ipod as well on the computer but I can't see it .
I'm pretty sure I've done everything correctly, but am still trying to get used to using my macbook so have probably overlooked something !

HI Matt542, and welcome to the community.
Did you transfer your iTunes library over to the new mac? If not, you should because once the Mac recognizes your iPod it is going to delete the music on it unless you have transferred the old library.
Your iPod can only be synced with one iTunes library at a time. If you try to sync it to a new computer/iTunes library the process will erase what is currently on the iPod and replace it with the content that is now in your new iTunes library. If possible, copy your entire iTunes library from your PC to your Mac first. Here are a few ways to do it.
http://support.apple.com/kb/HT4527
One way to do it is to use your iPod Classic as an external hard drive and copy it that way.
http://support.apple.com/kb/HT1329
Otherwise, you'll need to use one of the methods described in this Apple support document to copy content from your iPod back to your Mac.
https://discussions.apple.com/thread/2452022?start=0&tstart=0

Can I plug plug an external moniter into a thunerbolt Hub or thuderbolt device with extra thunderbolt inputs?

I need to use my Macbook Pro's thunderbolt port and an external moniter at the same time but i dont have the money for one of those thunderbolt moniters

Mine does have 2 ports, my question is will the moniter still work if its not going directly into my laptops mini port rather (an audio interfaces) a a 2nd port on an external thunderbolt device

Bluescreen after plugging an external display into my MBP 2012 under Windows 7 6 bit

Similar Messages

Maybe you are looking for