Bluescreen - Software Device Driver Problem

The problem also occurs with safari beta (3.0.4) and firefox (2.0.0.9). The Bluescreen is reproducible on both browsers with some pages of apple.com (those with Quicktime videos). After uninstalling Quicktime i saw a picture of the XMas-Add on the start page (with the Download Quicktime link). (Quicktime v 7.3)

Hi!
Its not easy to say what is wrong.
First of all, which notebook do you have exactly?
In your position, I would first check the RAM. There are some special tools and I do this always with Memtest86.
You can download an ISO image to burn it on a CD from [www.memtest86.com]
Boot from CD and test your RAM, maybe you will get some errors.
You can also reinstall Windows with the recovery disk. It could be a software or driver issue.
If you have more questions, I will try to help you.
Bye

Similar Messages

  • Solaris 10 GA and 64 bit Pentium Processor. Device Driver Problem

    We have a Dell Poweredge SC420 with 3.4 GHz Pentium 4 (EMT64)
    it also has 300Gb SCSI disk and 2 Gb Ram.
    By default this machine tried to boot with the 64 bit kernel then could not load the CADP driver (SCSI CARD). We forced the Kernel to 32 bit by changing the BOOT_FILE from /kernel/AMD64/unix to /kernel/unix.
    The machine is now booted but we are having problems with our PCI device. The device is a DMA Bus master and works fine on another SC420 which has a 2.8GHz Non-64 bit processor running the same release of Solaris. The device driver fails in strategy when we try to bind the dma buffer,(ddi_dma_buf_bind_handle) returning DDI_DMA_TOOBIG when the cookie count is > 1.
    The machine appears to function apart from our device although we have suffered some kernel panics. We cannot ascertain if other devices are performing DMA successfully but must assume that they are.
    Anybody got any ideas, Has anyone else got this processor working?

    My bad. The memory per guest domain is 1GB. Se the Section 1 (NEW) - Hardware http://wikis.sun.com/display/SolarisLogicalDomains/LDoms%20Community%20Cookbook
    Ignore the http://www.sun.com/software/solaris/specs.jsp

  • WinXP reboots caused by a device driver problem??

    Hi All the experts there,
    I recently bought and installed a MSI 865GM2-LS Motherboard. However, after I installed WinXP, as each time I get onto the web, system reboots and telling me it's caused by a device driver. I installed every device drivers provided in the installation disk. Is there sth wrong with the hardware of just software problem?
    This is really wierd because I've tried WindowsME with exact same hardwares attached and device drivers installed, it works perfectly!
    Please Help!
    MSI 865gm2-ls
    P4 2.6G 800 FSB
    Kingmax 512MB Memory
    Seagate 120G HD
    Pioneer DVD-RW A106
    WinXP Home/Professional

    Sorry, I forgot to mention that there wasn't any problems AT ALL when I use the exact cable modem with another computer that has WinXP installed!! I don't think it's the problem of the modem driver.
    Maybe BIOS configuration problems? Then, what is it? I have gone through numerous times and I can't think of anything I might be mistaken.

  • Please help. Lenovo Software or driver problem

    I am having a problem with my Haswell Levono Ideapad Yoga 11S.  Anytime the computer "updates" in any way, my SDCard slot, Both USB ports and the Touchscreen stop working. I originally thought it was a windows update issue causing it, but its not. I disabled all windows updates and it has not done one. I thought that fixed the issue, but then I uninstalled a software that required a reboot, and the issue started again. Each time this happens I have to do a restore point back to a restore point I made on 5/22/2015 in order to get it working, so I know its a software or driver issue. Pretty sure its some of this Lenovo software cauding the issue, or a Lenovo driver. I get two messages that pop-up in lenovo style pop -ups. #10engineinitializationfailed and also #10Motioncontrolerror or something when this happens. Also something pops up in my Device Manager as "unknown" but there is no way to tell what it is. Can someone please help me? My last post on here died without any comments at all. It seems like Lenovo just will not help me with their product they sold me. Am I just out of luck? Do I need to stop buying Lenovo products? I dont know...   It seems so. Lenovo, answer me.

    It looks like Windows Update tries to update a wrong driver and fails ? The update is probably an optional one, because most of the drivers updates are.You know you don't have to accept all the optional updates. You can even tell Windows not to show them anymore: right-click on the update, and choose not to show it anymore.

  • Bluescreen reads "device driver stuck in continuous loop"

    I have no knowledge of computers at all. I have had my laptop for about 18 months I purchased it new online while living in London and it has had this problem basically from the beginning but I was slack and didnt try to get it fixed on warrantee.
    It will turn on and work for a random period of time (sometimes 10 mins and sometimes 2 hours) then suddenly the screen goes blue and it reads a lot of numbers (I can get these and write them if required) and states "device driver stuck in a continuous loop beginning dump of physical memory, contact manufacturer for update on device. . . ."
    I have no idea what this means or what I should do/who I should ask etc.
    Can anyone advise me please?

    Hi!
    Its not easy to say what is wrong.
    First of all, which notebook do you have exactly?
    In your position, I would first check the RAM. There are some special tools and I do this always with Memtest86.
    You can download an ISO image to burn it on a CD from [www.memtest86.com]
    Boot from CD and test your RAM, maybe you will get some errors.
    You can also reinstall Windows with the recovery disk. It could be a software or driver issue.
    If you have more questions, I will try to help you.
    Bye

  • Thunderbolt device driver problem

    I have a W540 and running Windows 7 64 bits - and brought a WD My Passport Pro Thunderbolt HDD.  I know it is for Macs - but, I was thinking of reformating the HDD into NTFS once I can get the HDD to mount into Windows.  The Thunderbolt Devices display tells me -
    Thunderbolt Port 1 *-> Western Digital, My Passport Pro. 
    Unfortunately, I have a problem with "Standard AHCI 1.0 Serial ATA Controller" driver - gave me Code 12.  
    Does anybody knows of a replacement device driver to get this HDD to work?  Or recommend an equivalent portable HDD (of at least 4TB) that works with W540 Thunderbolt port.  
    Thanks... WTS

    Update - I think a more fundamental issue is this ...
    Does the W540 BIOS support Thunderbolt hard-disks?  I ask this - because I observe this ... when a Thunderbolt hard-disk is plugged in AND I reboot the computer, it hangs at the BIOS initialisation stage.  Only when I remove the Thunderbolt drive, then the machine can boot up.  
    Also I noticed there is NO option in the BIOS for Thunderbolt - only USB.  
    TS

  • Unable to Sync Centro with Vista 32; device driver problem

    I currently sync my Palm Centro (Verizon) to my Desktop Computer running Windows XP and Palm Desktop 6.2.2 with no problem. I am trying to move everything to an HP Notebook running Vista Business 32 bit. I disabled Norton Internet Security and loaded Palm 6.2.2 on the notebook but was unable to sync. Error message on the Palm said “The connection between your handheld computer and the desktop could not be established. Please check your setup and try again”. On the notebook the Palm handheld device driver has a “?” besides it. I tried doing a clean uninstall and reloaded Palm Desktop 6.2.2, but it still gives me the same error message. I tried looking for an updated device driver, uninstalling and reinstalling the device driver didn’t help either. Palm Support was unable to fix the problem. I then tried restoring the notebook to the factory condition, and reinstalled Palm Desktop; same error message; Palm device driver still has a “?”. I called HP Tech support. They had me update the Bios and update Vista to Service Pack 2. Still has the same problem. This is driving me crazy! Any ideas???
    Post relates to: Centro (Verizon)

    The system doesn't allow me to browse to PalmUSBD.inf or any other specific file name. It only allows me to browse to the subfolder USB_Driver. When I tried to key in the file name C:\Program Files\Palm\USB_Driver\PalmUSBD.inf and click next I'm told "The location you specified does not exist or cannot be reached."
    I tried uninstalling the driver, then reconnecting to another USB port; driver seemed to install successfully, but then still has "?" and doesn't work. I am not using a USB Hub.

  • G6-2228ee blue-tooth hid device driver problem

    recently i purchased HP Pavilion g6-2228ee. it comes with win-8. i updated with windows 10 but
    my bluetooth hid device driver have a  issues shown a message "This device cannot start. (Code 10)" pls help update bluetooth hid device drivers

    Hi:
    Please see if this W7 BT driver and software works...Use the same thing for the dv9K
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&sp​...

  • MTP USB Device Driver problem

    Hi Guys
    I currently have an iPhone 5S and I am trying to connect it to my Windows 8.1 Computer so that it appears as Mass Storage, enabling me to back up photos and videos. I noticed int the Device manager that the "MTP USB Device" has an esclamation mark on it and it states that the driver was unable to verify the digital signiture of the device and cannot be used (Code 52)
    I have tried various methods to try and resolve this issue but I have had no success.
    E.G...
    https://discussions.apple.com/thread/3153566?tstart=0
    https://discussions.apple.com/message/16322708#16322708
    https://discussions.apple.com/message/22972618#22972618
    and various other methods.
    I Contacted Apple support and Microsoft Support but they were unable to help me. The device was working until a week ago and suddenly stopped showing up as a Mass Storage device. It is visable in iTunes and can be used to USB tether, but not USB Storage because of this MTP USB Device error.
    Has anyone got a fix for this that actually works?
    Your assistance greatly appreciated.
    Chris

    Update.
    I have found out that the driver file for MTP USB Device is the file winusb.sys.
    The problem is that it is not digitally signed and windows 8.1 can not verify it's signiture. This is why there is an esclamation mark on the device in device manager.
    I have tried various procedures to fix the problem but none have been successful yet!
    If the driver file was digitally signed, the driver would be fine.
    The search goes on..

  • N500 with PCI device driver problem sound

    hi , i re instal a new windows in my N500, XP SP2, and i downloaded all the driver in lenovo site, extrat all the pacckage, but after all, i still have a problem with the sound, with only driver missing!! this mysterious PCI DEVICE....i try to found in all site about a solution, i updated my HDMI from microsft like they say and try so many other idea without solution....always when i install the file setup in DRIVERS\WIN\AUDIO\52av02ww\XP32    i found a strange message after a while showing "le pilote n'a pas été installé: le peripherqiue correspondant est introuvable" it means that the correspndant device is not found....
    this a copy of the report from everest
    Debug - Unknown
    Motherboard   DMIMOBO: LENOVO KIWDX  
    Motherboard   DMISYS: LENOVO 42335LG  
    Motherboard   SROSA001.86C.0000.D.0810200818    
    Motherboard   Unknown  
    PCI/AGP   14E4-1713: Broadcom NetLink (TM) Fast Ethernet [NoDB]    
    PCI/AGP   197B-2381: JMB38X SD Host Controller [NoDB]    
    PCI/AGP   197B-2382: JMB38X SD/MMC Host Controller [NoDB]    
    PCI/AGP   197B-2383: JMB38X MS Host Controller [NoDB]    
    PCI/AGP   8086-2919: Intel(R) ICH9M LPC Interface Controller - 2919 [NoDB]    
    PCI/AGP   8086-2928: Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 1 - 2928 [NoDB]     PCI/AGP   8086-292D: Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 2 - 292D [NoDB]     PCI/AGP   8086-2930: Intel(R) ICH9 Family SMBus Controller - 2930 [NoDB]    
    PCI/AGP   8086-2934: Intel(R) ICH9 Family USB Universal Host Controller - 2934 [NoDB]    
    PCI/AGP   8086-2935: Intel(R) ICH9 Family USB Universal Host Controller - 2935 [NoDB]    
    PCI/AGP   8086-2936: Intel(R) ICH9 Family USB Universal Host Controller - 2936 [NoDB]    
    PCI/AGP   8086-2937: Intel(R) ICH9 Family USB Universal Host Controller - 2937 [NoDB]    
    PCI/AGP   8086-2938: Intel(R) ICH9 Family USB Universal Host Controller - 2938 [NoDB]    
    PCI/AGP   8086-2939: Intel(R) ICH9 Family USB Universal Host Controller - 2939 [NoDB]    
    PCI/AGP   8086-293A: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A [NoDB]    
    PCI/AGP   8086-293C: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C [NoDB]    
    PCI/AGP   8086-293E: PCI Device [NoDB]    
    PCI/AGP   8086-2940: Intel(R) ICH9 Family PCI Express Root Port 1 - 2940 [NoDB]    
    PCI/AGP   8086-2942: Intel(R) ICH9 Family PCI Express Root Port 2 - 2942 [NoDB]    
    PCI/AGP   8086-2944: Intel(R) ICH9 Family PCI Express Root Port 3 - 2944 [NoDB]    
    PCI/AGP   8086-2946: Intel(R) ICH9 Family PCI Express Root Port 4 - 2946 [NoDB]    
    PCI/AGP   8086-294A: Intel(R) ICH9 Family PCI Express Root Port 6 - 294A [NoDB]    
    PCI/AGP   8086-2A40: Mobile Intel(R) 4 Series Chipset Processor to DRAM Controller - 2A40 [NoDB]     PCI/AGP   8086-2A42: Mobile Intel(R) 4 Series Express Chipset Family [NoDB]    
    PCI/AGP   8086-2A43: Mobile Intel(R) 4 Series Express Chipset Family [NoDB]    
    PCI/AGP   8086-4237: Intel(R) Wireless WiFi Link 5100 [NoDB]
    please who's have idea about this? who can help me?

    try to run executable files on right click by selecting "run as admin"
    and try to run this first, then try this.
    or try to run lenovo smart downloading.

  • HP Probook 470 G0 - Biometric device (driver) problem

    Hello,
    I have a problem with biometric device, I can't find biometric in device manager. Does anyone know how can i fix it? I installed driver (Validity Sensor) but nothing happens when i enter in device manager.  Does anyone know how can i enable biometric? Thats the whole problem I think, there is no biometrics in device manager. Is that problem with BIOS, can i enable it there or what? I use Win 7, 64-bit.
    Thanks in advance,
    Aleksandar Sretenovic

    Can anyone help me, please???

  • NI device driver locations for upgrading labview to 64-bit

    There is a section in the NI LabVIEW 2012 SPI (64-bit) download where it prompts you for the location of the NI Device Drivers.  Unfortunately, I cannot get a hold of the original CDs for a while, so I cannot see where they default to.  Does anyone know where these drivers default to?  Alternatively, what should I search for if I want to find these device drivers?
    Attachments:
    device driver problem search.png ‏247 KB

    Hi leejesm,
    You can find device drivers at this link.

  • Windows vista, Ipod shuffle 4th gen.  Computer cannot find device driver software for ipod.

    After several hours trying the troubleshooting options provided by the apple support site, I have come to what I think is the issue here.  My girlfriend recently got an ipod shuffle and when plugging it into her computer the dialog pops up saying it is installing device driver software for the ipod.  Eventually it asks me to insert the CD that came with the ipod.  No CD came with the ipod, so I click the option that says "I do not have my cd".  Then it gives me the option of searching automatically or manually for the driver software.  The automatic way can't find it.  Doing it manually, with the help of the troubleshooting page, didn't work either.  google search can't seem to help me on this one.  Also, I tried plugging the ipod into my computer (not hers) and it worked fine, it was able to install the device driver software on its own.  Does anybody know the issue here?  My computer has windows 7, and hers has vista.  Hers is Serice Pack 1.  When I tried installing service pack 2 it wouldnt work.  I don't know if that is the issue though.  I have tried just about everything, I think the issue is finding the device driver software.  When I do a google search nothing comes up, so I have no idea what to do at this point.  Any help would be appreciated, thanks.

    Well its surprising to know that! But even  have an ipod shuffle 3rd gen n dint face any problem like that. FYI no cd comes with the ipod jus take ur ipod to an apple exoert n he will solve ur problem .

  • Install Device Driver Software for Palm TX

    My new notebook has Windows Vista and I have had my Palm TX for almost two years.  To install the Palm on my notebook I downloaded the version for Vista from Palm.com.  When I went to synchronize the Palm with the computer during the installation the message kept coming back that "device driver software" could not be found.  Where do I find the driver software?  Is it on the original CD that came with the Palm?  At this point I don't know what to do.  Can someone help me with this problem?
    Post relates to: Palm TX

    mar008,
    When you upgraded to Vista, did you install over the existing XP install on the same PC or get a new computer with Vista?
    If you upgraded over the existing install of XP, you may need to do a "clean" uninstall and re-install Palm desktop. You should be able to use the original CD that you got with the TX on the Vista OS.
    Not sure why you are getting the 680 message. Did you ever have a Treo 680 or a handheld that is a different model than the TX?
    Here are the "clean" uninstall procedure for Vista.
    You should first make a copy of your data to have just in case something
    happens. You can find your data files by going to Start --> Documents -->
    Palm OS Desktop. Highlight your Palm Desktop username and right click and
    copy. Then go to your PC desktop right click on a blank spot and select paste.
    Now you want to uninstall Palm Desktop and remove everything that has to do
    with Palm Desktop from your computer.
    Go to the following locations on the PC and delete the folders listed below.
    C:\Program Files\Palm or Palm One
    C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
    PalmOne
    C:\Users\[Vista Login Name]\appdata
    *Note you may need to view hidden folders to get to appdata. To do that go
    into your control panel and open folder options. Go to view tab and uncheck
    hide hidden files.
    Once this is done you will need to delete some registry keys from your PC Operating System.
    Word of warning, going here and deleting the wrong thing can cause your PC
    from starting up, crashing and deletion of programs and data. If you feel
    you are unsure of yourself, see if you have a friend that can help you or a
    PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
    Go to start on the PC, in the search field type "regedit.exe" without quotes.
    Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
    Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
    The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
    If you make a mistake, stop what you are doing. And call a PC technician.
    BUT do not turn off your computer.
    The reg keys are as follows (Note: some of theses reg keys will not be here
    but if they are delete them)
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
    Next reboot your computer.
    Then reinstall your palm desktop from the CD and do a hotsync. If it asks
    you for a username and you synced your device before, put in 'test" if you
    did not sync before create a hotsync name.
    Post relates to: Palm i705

  • IPod Nano 8G - Win7 - Device driver software wat not successfully installed

    Hi,
    Just got my first Apple iPod Nano 8G (4th) and has installed iTune 9.0.2 (64bit) on my Win 7 Ultimate x64. But I am not able to connect iPod nor Sync with iTune successfully even after reinstall/reboot many times with the same problem.
    After the installation of iTune accomplished, I plug USB adapter into PC, then Win7 detected and started to install the driver for the hardware, but got "Device driver software wat not successfully installed" as a result.
    Then I went to Device Manager tring to install the driver manually for "Apple iPod USB Driver", but finally I failed again and got "Windows cannot verify the digital signature for the drivers required for this device....", I think this is the software problem, please kindly advise, thanks a lot!

    First, my officejet 4500 all-in-one installed and is working perfectly with wireless; however, I have for months still/have been getting the error/uninstall window continuously, telling me install was not successful, but again, printer, scanner, etc., working fine!  But this "the installation was not successful" window is ALWAYS up or if I ctrl-alt-del and get it to end now, it comes back up; I have even let it do its thing, finish, restart, but it ALWAYS comes back up, trying to find a solution, etc.  BUT MY PRINTER IS WORKING FINE!  Please help me get rid of this; also, the file that it puts on desktop to troubleshoot, etc then delete afterward, I have deleted it, but this "unsuccessful" keeps trying to uninstall, reinstall; and as I said, actually went through all the steps to get it gone (printer working fine) but it will not go away!  Thanks. ajm

Maybe you are looking for