Bluetooth 2.0 with A2DP profile support

I have a set of parrot Hi-Fi speakers with built in bluetooth connectivity. They require Bluetooth 2.0 with A2DP profile support to pair. Does anyone if the new Macbooks with Leopard OS supports this ??

Hi Sumpey,
IF that device works fine with your Tiger, big chance that device will work fine too with Leopard, especially if there is no drivers involved.
But I cannot be that sure since Leopard is not released yet.
But do check frequently to the device web site and apple sites.
Good Luck.

Similar Messages

Getting Bluetooth Stereo to Work (A2DP profile)

IT WORKS!
I was terribly disappointed to learn that Apple didn't include the A2DP Bluetooth stereo profile in the iPhone. Since A2DP Bluetooth stereo is an established and stable standard, I can't think of any reason why Apple would not have included it in the iPhone. Hopefully they will add this as a firmware update, in the near future. In the mean time, I found a work-around.
For more than a year, I have been using the Wi-Gear, iMuffs MA110, Bluetooth dock adaptor on my conventional iPod, with great success. My Motorola HT820 headset worked simultaneously with both my cell phone and the MA110 on my iPod. The iPod would automatically pause, when a phone call came in. It was really great and best of all, NO WIRES!
Well, when I got my iPhone home and activated, one of the first things that I did, was to embark on finding a way to get rid that archaic wired headset that comes with the iPhone. The answer turned out to be rather simple, though somewhat irritating. I plugged my MA110 Bluetooth adaptor into the dock of the iPhone. The iPhone asked if I wanted to go into "Airplane Safe" mode. I responded "No." About 10 seconds later, I heard the beep in my Motorola HT820 headset, indicating that syncing had been successful.
I went to iTunes on the iPhone and picked a tune and it played over my HT820 headset. All of the headset controls worked (Play, Pause, FF, REW, Skip, Next) Then, I used my landline to call my iPhone. The music faded and I was able to use the phone function over the HT820.
The only glitch is that when I pause the music for too long, the iPhone removes power from the dock connector, which turns off the MA110 adaptor. This requires activating the iPhone screen and waiting for the MA110 to re-sync with the HT820 headset, before you can use it again. This only applies to pauses that were NOT instigated by a phone call or when you hang up a call and don't start the music again, right away. When you are on a phone call, the dock power stays active.
The irritating part is that Apple's limitations requires me to have a Bluetooth adaptor, at all. At least, the MA110 is quite small and unobtrusive. It's about the size of a quarter and about as thick as three quarters stacked. It's small enough to fit through the dock opening in most carrying cases. See the image here:
http://ActionAmerica.org/images/iPhone-iMuffs.jpg
Note: Your Bluetooth headset must be turned on, BEFORE you plug in the iMuffs MA110, if syncing is to be successful. The same applies to re-activating the dock power after long pauses. Also, the first time you sync your headset to the MA110, you will probably have to put the headset into "Discover Me" mode.
I hope that this helps some of you.
It's not a great fix, but it should hold us, until Apple gets their Bluetooth act together.

what i want to know is if a2dp is entirely a software thing and thus we know its simply a matter of firmware update, or is it hardware related at all meaning that it might not even be possible for iPhone1.0 to ever support stereo via bluetooth? is it possible that the muffs bluetooth adapter has special hardware not in the iPhone is the reason it works?
if its just a matter of firmware, i can only assume its just a matter of time until this is fixed...but does seem a pretty glaring omission. I wish Apple would make some comments on things like this... i really like the look of the motorola rockr bluetooth headsets, and dont want to buy some momo single earpiece one now if stereo is coming soon...

Portege R400 - A2DP profile is not working using BT Stack 5.10.12

Hi,
I am trying to get my Toshiba R400 connected to the Logitech Wireless Music station. I can find the device, but while pairing, it says something like error while connecting with remote device, please try again. It doesn't ask for a passkey unlike my pda, where pairing works just fine.
This only happens with A2DP profile, using headset profile, the stack ask me to push a button on my headset to confirm that everything is working. But there is no button to confirm on a media receiver. It's not really a headset. So I'm stuck hearing the ringing sound but no way to confirm. I don't want to use that profile anyway because I want to stream music, so I wanted to try it with a different stack. But how do I do that? When I uninstall the stack, everything "bluetooth" is gone in the device manager. I can't the device at all.
I'm using Vista Ultimate 32Bit and the BT Stack 5.10.12. It would be great if someone can tell me.
Thanks!

What you can try is to check the following setting:
Right-mouse-click on the Bluetooth systray icon -> Options...->Security-> Custom Level->Mode: Link level enforced security
Try setup again. You can switch back to Standard security if your setup was successful.

Can MacBook Pro (Aug 2007) with Snow Leopard support A2DP headsets?

Hi I have a MacBook Pro (Generation 3,1) bought in August 2007 (hence NOT Late 2007 model) and currently running Snow Leopard. I'm interested in getting myself a Logitech Bluetooth Wireless Headset, but it only supports devices with A2DP Bluetooth profile, namely recent iPhones, iPads and iPod touches.
I was wondering if it could also work with my MacBook Pro in its current state and configuration? Many thanks if anyone could help.

Mac OS X 10.6 Help: Bluetooth profiles supported by Apple Bluetooth software
Stefan

Create Midlet for Bluetooth A2DP profile

Hello,
I'm a newbie. I would like to know if it's possible to create a midlet for bluetooth A2DP profile. If it is, please let me know where i can get information on this.
Thank you so much,
Ken

Now I'm facing the same problem with A2DP on my Nokia 6230 (original player doesn't support it) so I'm about to create my own player supporting this bluetooth protocol. I just wanted to ask you how far you've got with this.
Thx.

Bluetooth A2DP profile for Tiger?

I am looking to get a wireless headset to game with for my MacBook Pro - with Bluetooth built in, I figure this is the way to go.
My research so far has shown that bluetooth stereo headsets with microphones are available, but they require the A2DP Bluetooth protocol. Most sites mention OS X doens't support it, but they are also backdated several months.
Can anyone confirm if the latest version of Tiger supports A2DP, and / or if support for it will be included in future releases or updates of OS X?
Thank you!
MacBook Pro Mac OS X (10.4.7)

Joseph, thanks for the post. I'm a Joseph too, must have been fate I found your post. I was very stoked about the iTouch being able to use for Skype. Skype has a section at their site about how it's doable. I have the 3.0 ver on my Touch. I just tried to pair my jawbone to the touch, but no luck. yet, I was at the Apple store yesterday and in a group, including staff, discussing using Skype on the Touch. The staff was telling us the Jawbone & their $79 Platronics would work. I already have a jawbone for my cell phone, but the Touch, when Bluetooth is on, doesn't even find the jawbone device. So, I'm not sure what's next. I'll try the headset you noted.
Thanks for your post.

Bluetooth A2DP profile inside C1-01 available?

Hi,
I just bought my Nokia C1-01 and paired my Motorola BT Headset HT820 for MP3 music. I did this, because some stores which offer this phone mentioned C1-01's available support of A2DP.
After recognizing bad BT-music-quality I took a look at the phone specs. and: there is no support of A2DP (in Europes 4.40 Firmware-version!).
@all
My question: are there other C1-01-devices with BT-A2DP support out there?
@ Nokia-Guys:
Will there be a support for Europe-C1-01-phones later on; i.e. is it planned to do an update?
Or are there any hardware-performance issues which pretends a A2DP-support?
Is it possible for me to get a firmware-version with A2DP-support?
Many questions...
Nevertheless - thanx in advance for your support,
hwu

Funny you should have had the same problem. I have just upgraded my software to V5.4 and the problem
still remains. Very low audio when connecting to any Bluetooth Audio device. Its now 2 Feb when is the fix coming out. Nokia
pundaMilia wrote:
When will it be available ? "...soon..." we ware a month further now...
have you given up????

Is the bluetooth profile - SAP (sim access profile) supported

Is the bluetooth profile - SAP (sim access profile) supported by iPhone. I need this profile in order to allow my car to support complete handsfree.

A quick search on here revealed these existing threads asking the same question:
http://discussions.apple.com/thread.jspa?messageID=11746221&#11746221
http://discussions.apple.com/thread.jspa?messageID=11629059&#11629059
http://discussions.apple.com/thread.jspa?messageID=11631930&#11631930
Short answer is No.

A2dp profile for lenovo n200?

Hi,
Ive 3000 n200 (Vista) and bought a bluetooth headset with works well. But this headset could also works as stereo headset for music. A2DP Profile. So now my question: is this profile activ at my laptop or Ive to activate it? Ive no clue how it works. I can talk at skype but I cant listen music.
Thanks a million in advance.
Greetings from Germany
Markus
Headset
http://www.jaybirdgear.com/bluetooth-stereo-headphones-workswith.php

I think that webpage only shows the specs overview but not the part number. To really go deeper into your laptop spare parts, your computer's "Hardware Maintenance Manual", 42x3553_02.pdf
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-63486
As for the memory query, you can search within this forum with regards to the maximum memory you can install but that would depend on the operating system you are using. With Vista, I read somewhere that it can only recognize and use up to 3.5GB even if you have 4GB installed.

Nokia firmware update for A2DP profile

Sir,
I am very much disappointed as I bought a new nokia bluetooth headset BH-111 with a hope that I would be able to hear good sound quality, but my Nokia C3 is not supporting it now.Neither the controls are working and the quality of sound is mono. It resulted in waste of my money. This problem can be easily resolved by updating the firmware. Please update the firmware for Nokia C3 supporting A2DP profile soon. If this issue doesn't gets resolved it would remove my trust from Nokia Brand.
Thanks

Hi vishesh0311,
Welcome to the Nokia Support Discussions!
yasfer21 is right. I suggest contacting Nokia Support to properly channel your complaints and for the relevant team to check on it.

What bluetooth EARPHONES work with i-phone 3gs

what bluetooth earphones work with i-phone 3gs i've looked at a couple but found not compatible, so any suggestion's would be great

The iPhone is not designed to pair via Bluetooth to any computer (Mac or otherwise) except for personal hotspot and it will only do that if your cellular plan supports it. Following is a link to bluetooth profiles supported: iOS: Supported Bluetooth profiles
If you are trying to pair for Handoff or Continuity, note 2 things: 1- Both devices must have bluetooth turned on and they must be in range of each other, but you do not pair the devices as you would for other bluetooth uses; and 2- Handoff and Continuity do not seem to be working for a large number of people and there is no clear answer that is solving this for them.

Bluetooth connection unsuccessful with i phone 6 plus iOS 8.1

I have a MacBook Air Mid 2013 and iPhone 6 plus iOS 8.1.
Bluetooth connection between My MacBook air and iOS 8.1 is unsuccessful.
and i was told that in order to work with handoff i need to sign into iCloud with all my devices and to pair them with bluetooth.
Unfortunately it is not working.
I tried to sign out and re-sign in into iCloud and i tried to turn off bluetooth but its not working.
Can anyone help me Please
Thanks

The iPhone is not designed to pair via Bluetooth to any computer (Mac or otherwise) except for personal hotspot and it will only do that if your cellular plan supports it. Following is a link to bluetooth profiles supported: iOS: Supported Bluetooth profiles
If you are trying to pair for Handoff or Continuity, note 2 things: 1- Both devices must have bluetooth turned on and they must be in range of each other, but you do not pair the devices as you would for other bluetooth uses; and 2- Handoff and Continuity do not seem to be working for a large number of people and there is no clear answer that is solving this for them.

HT204368 iphone5 bluetooth not connecting with bluetooth device

Hi
I am haveing problem to connect my bluetooth device with my iphone5.

Supported Bluetooth Profiles > http://support.apple.com/kb/HT3647

Does the PS3 Bluetooth Headset work with the IPod Touch 4Gen?

Does the PS3 Bluetooth Headset work with the IPod Touch 4Gen?
I really need to know. I have been trying to Pair them but it never shows up on the IPod. Anyone know the problem?

Is it A2DP?
The ipod touch does not support telephone headsets, just stereo headsets.
http://support.apple.com/kb/HT3647

HT204387 can we get apple to make a fix to download that would enable the bluetooth file sharing with any deivce?

can we get apple to make a fix to download that would enable the bluetooth file sharing with any deivce? i would like to to stay with Apple iphone but if they dont improve the lack of features.. i will move on and I know im not the only person to think like this.
regards
gavin_p

There is not "fix" to be provided, Apple made a decision to not include the file sharing profile.
You are welcome to provide feedback, but after six years, I would not hold your breath.
Feedback can be left here: http://www.apple.com/feedback/iphone.html

Bluetooth 2.0 with A2DP profile support

Similar Messages

Maybe you are looking for