Bluetooth 3.0+HS adapter for desktop PC or USB slo...

All Symbian ^3 devices support bt 3. I couldn't find further details about it but I want to benefit from the 21 MB/s or above for my C7 and N8.
1. Is it possible with bt 3 adapters to get the 21 MB/s in practice?
2. Are there BT 3.0+HS cards/adapter for PCI, PCIe or USB out there? In germany you can't get it nowhere. I only found mini PCIe cards for notebooks but nothing for the USB slot or desktop PCs in general.
User experiences are also welcome. ...compatible with OVI Suite?....

Sorry to share this with you but the "so called phones" do not have high speed because
" The High-Speed part of the specification is not mandatory, and hence only devices sporting the "+HS" will actually support the Bluetooth over Wifi high-speed data transfer. A Bluetooth 3.0 device without the HS suffix will not support High Speed ... " -http://en.wikipedia.org/wiki/Bluetooth#Bluetooth_v3.0_.2B_HS
read this to verify your doubts
http://www.gsmarena.com/wireless_n_bluetooth_3_speed_test-review-551p4.php

Similar Messages

Pci adapter for desktop

Got Verizon Fios a few weeks ago. Verizon tech told me that my Neatgear pci adapter for my second desktop is not compatible with the Verizon router. I have the Actiontec router from Verizon. Does anyone know what brand is compatible with Verizon so that I can get the second desktop connected to the internet?
Thanks,
Marcus

Now I see the problem... The Netgear WG311 is a piece of junk with a so-so driver.
There is a way to make it work with a driver from Marvel (not the comic book company), but your best bet is to go out and grab a Netgear WG511T if you want to stick with Netgear. Any Belkin, D-Link or Linsys (Cisco) wireless-G adapter will work fine also.
Message Edited by VikeFan1961 on 03-29-2009 11:05 AM

Where do I get the AC to DC Power Adapter for a Linksys "Compact USB 4-Port Hub [USBHUB4C]

I have two Compact USB 4-Port Hubs, Model Number USBHUB4C. These Hubs can be powered, but I cannot find any information on External Power Adapters for these Hubs in any of the documentation or on the Linksys Web Site.
I need to know if Linksys has such Power Adapters available, and if so what the Model Numbers are, and how or where to purchase them.
If I will need a third party Power Adapter, I need to know what the Output Voltage & Current requirements are, and I also need to know the Polarity of the of the two Jack Contacts. [i.e. Is the center pin on the Hub's Jack Positive or Negative?] If possible I'd like to have a recommended Brand and Model Number for the Power Adapter.
Thanks In Advance,
Bruce

Friday, August 28, 2009, 0302 PDT
Hi, again,
Boy, am I glad I was able to find an answer to my problem in here. I find this very interesting. Here it is, almost 3 years after I made the original post, that I need to find the Power information, for this Device, again, but because of a Computer Crash, I could not get to the original notes, I made about this Forum Entry, so I began the search, again.
I find this very interesting. Here it is, almost 3 years after I made the original post, that I need to find the Power information, for this Device, again, but because of a Computer Crash, I could not get to the original notes, I made about this Forum Entry, so I began the search, again.
I have myriad AC/DC Converters, some of which are Voltage Selectable, but since the Power Specifications aren't on the HUB, or in the PDF Documentation, as is the case with most other Products, I came back to LinkSys/Cisco. As soon as I entered the Model Number of the "Compact USB 4-Port HUBs, Model Number USBHUB4C," for a search, this Forum entry came up on the page, and it appears there haven't been any queries, on any other subject, about this Device, in the interim.
Since the entry has been Viewed 2,484 times, hasn't it dawned on someone that it might be a good idea to carry a Power Product, that is compatible with this HUB, or at least provide a Specific Source, with a Model Number, (for instance, a Radio Shack SKU) so we don't need to hunt for one, over, and over. Why the information was never included in the package with the HUB, beats me. (It should have been on the Device, itself.)
Anyone who knows anything about USB Devices, knows that many of them cannot be powered from the USB Ports on a Computer, especially, on Laptops. Since one of the things mentioned in the Specifications is the fact that you can have "Max. Devices 127 (Daisy-chaining Hubs Together)," it would seem to be obvious that Power Information would be necessary. Since the "Daisy Chain" number is true, it should be obvious, that the "Chain" would require quite a few AC/DC Adapters to power it, adequately.
When this Device was Designed, the requirement for External Power must have been known, or there would never have been a Power Connector built into the Device. I've been in electronics for about 50 years, now, and I know that presently, it's a rarity that the Power Requirements aren't shown on the Device itself, with a Symbol depicting the Polarity of both the Inner, and Outer Conductors. Even Toys have that information shown on them.
I love these HUBs, but LinkSys/Cisco has really dropped the ball on this one. I'm guessing that a lot of people have discovered, that if this 4-Port USB HUB doesn't have External Power, they quickly decided not purchase another one, when they need to "Daisy Chain" them together, for their Network of USB Devices.
When you consider the loss of HUB Sales, coupled with a loss of income from a Power Supply they've never stocked, the numbers could be quite large. That's not even considering the Support time I'm guessing would have been necessary when Customers determined they had a problem, and needed answers. (It's not really a guess, since I talked to several Support People, without getting a satisfactory answer, before I finally came to this Forum, as a last resort.)
I was actually shocked to find that LinkSys/Cisco, didn't sell an AC/DC Power Supply for the HUB, because Power Supplies like that are so commonly required, with the Electronics sold, today. I'd be willing to wager that LinkSys/Cisco does, in fact, carry an AC/DC Power Supply that would be compatible with the "Compact USB 4-Port HUBs, Model Number USBHUB4C," they sell. When something like this happens, I wonder how many other Opportunities like this, have been missed by the people who work for this company.
We've all heard the expression about "Being too close to the Forest, to see the Trees." This may be a good example of it's meaning. At least I was able to find the answer to my Problem, thanks to the fact that the Query I made almost, 3 years ago, which had an answer, was still available to me, thanks to this Forum.
Very Interesting!
Bruce Feezel
Comedian62

I have a iMac its Bluetooth is not working. I need a Bluetooth Adapter for it. I am using Mac OSX 10.9

I have a iMac (Not under warranty) its Bluetooth is not working. Blue tooth Hardware is failed and Replacement is huge cost,I need a Bluetooth Adapter for it. I am using Mac OSX 10.9

Apple used to recommend this but now say it's not compatible.
OWC have IOGear GBU421W6 Bluetooth 2.1 USB Micro Adapter and IOGear GBU321 Bluetooth USB Adapter, & should be able to confirm whether or not they'll work for you.

Using My N73's Bluetooth connection as adapter for...

Hey guys,
This is not a question that can be put into one sentence...
I shall put it as short and descriptive as possible.
I can connect my laptop to the internet using the Built-in Modem I have in my laptop (Dial-Up).
My brothers laptop is new, He does not have a Modem built in and I do not have any other hardware here.
I was thinking, Is it possible to Have the following setup
Dial-Up -> Laptops Modem -> N73's Bluetooth connection -> Brothers Bluetooth connection (on his laptop) -> Internet.
So actualy making a Networking Bridge from My Laptops Modem to the Bluetooth of my N73.
(I could maybe buy a Lan Cable somewhere here and make a Networking Bridge between the Modem and the Lan port, but only if this is not possible whatsoever.)
Thanks In Advance...

This has been a while, and I am back home now.
What I ment is what I said, I never mentioned my laptop having a Bluetooth connection nor using my telephone as a modem. I said that I wanted to use my Laptop as Modem and my brothers laptop as the client connection through bluetooth to my telephone wich in his way would be just a bluetooth adapter for my laptop. Now I figured that out myself and I had Dial-Up Internet on both laptops.
Since It worked I am going to ask another question hoping that you guys will just say I don't know instead of It's not possible.
How do I configure my N73 to become my laptops Bluetooth Adapter so I can connect any bluetooth device to my laptop.
(saves me 20 euros, but that is not the point)

Bluetooth adapter for x100e/Windows 7

Can anyone recommend a bluetooth adapter for x100e with Windows 7? Is anyone using one successfully?
thanks!
Medwynx

What C875D do you have? Check the label on the bottom for the full model and part numbers.
- Peter

Bluetooth adapter for the ipod hifi and my iphone 5

is there a bluetooth adapter for the ipod hifi that will let me use my iphone 5 via bluetooth?

The lock button on my iPhone5 has also started acting up. Extremely annoying. I have to get it replaced, but I've dropped my phone once and there is a scratch on the top left corner of the phone, so I'm not sure what the warranty says about this situation.

Ralink (Mediatek) Bluetooth PCIe Adapter for Windows 8.1 driver missing

plz send me solution ralink Bluetooth PCIe Adapter for Windows 8.1 driver missing

Hi:
This is the latest W8.1 BT driver for that card.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_139921_1

Exist BLUETOOTH headset Adapter for ipad for voice in + voice out

exist BLUETOOTH headset Adapter for ipad for voice in + voice out?

The bluetooth profiles on the iPad do not support bluetooth headsets. See:
http://support.apple.com/kb/HT3647

Can I get a Bluetooth adapter for my iPod classic

I'm looking to buy a Bluetooth adapter for my iPod Classic. Any suggestions?

Yes. A few $/£ should get you a compatible battery and the tools to do the job. It is a little fiddly, but I've done several. Video tutorials are online.
tt2

I need Ralink Motorola BC8 Bluetooth 3.0+HS Adapter(or Any other Bluetooth driver which is compatible with HP Pavilion DV6-6119tx) for Windows 8 Enterprise 64 bit.

It is my humble request to help me about below issue:
I have HP PAVILION DV6-6119tx Notebook PC with Windows 7 ultimate 64 bit but
now I have upgrade to Windwos 8 Enterprise 64 bit than my Ralink Motorola BC8 Bluetooth 3.0+HS Adapter did not work in Windows 8 Enterprise 64 bit.
I have tried many times with difference way to fix this problem but
still I am unable to get it. So please help me to solve my problem.
I really need Compatible Bluetooth driver for my Notebook PC to run on Windows 8 Enterprise 64 bit.
(or Any other Bluetooth driver which is compatible with HP Pavilion DV6-6119tx to run on Windows 8 64 bit)

Hi,
Did you mean this version?
Ralink Motorola BC8 Bluetooth HS Adapter
Version 3
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Type=Software&Name=Ralink+Motorola+BC8+Bluetooth+HS+Adapter&ModelOrVersion=3&Vendor=Motorola&Locale=1031%2C1033%2C1042%2C1043%2C1046%2C2057%2C3081%2C4105%2C16393&LastSearchTerm=Ralink%2BMotorola%2BBluetooth%2B%252bHS%2B%2BAdapter%2B&BreadcrumbPath=Ralink+Motorola+Bluetooth+%2BHS++Adapter+&TempOsid=Windows+8
According to this site, this version of Bluetooth adapter is compatible with Windows 8, so it's related to driver. Please try to remove the driver in device manager and restart the computer to reinstall to see what's going on.
Download this driver and install this in compatible mode:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?lang=en&cc=US&swItem=ob_92786_1
To known if this issue is caused by failing to load driver, i suggest we disable fast boot to check the results:
How to Turn "Fast Startup" On or Off for a Hybrid Boot in Windows 8 and 8.1
http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html
For further help, please upload the event log here for research.
Please understand that if we finally fail to get this done, we have to wait for the driver update from manufacturer.
Kate Li
TechNet Community Support

Ralink RT3290LE + Bluetooth 4.0 Wifi Adapter Replacement options for Pavilion G6 2301ax!

What Wifi Cards are Supported for
"Ralink RT3290LE + Bluetooth 4.0 Wifi Adapter"
Included in Pavilion G6 2301ax.
From india.

Hi @PulsarLight ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue of replacing the Bluetooth adapter for your HP Pavilion g6-2301ax Notebook. Here is a link to your Manual that shows the adapters on page 32.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Where to download driver for the SD BT2 Bluetooth adapter for Win7 x64?

Hello,
where can I download drivers for the SD BT2 Bluetooth adapter for Win7 x64?
Thank you.

I agree with bluecat.
BT SD card is not on the market for years now and this device is not supported anymore so I think you will not be able to find driver to get it work with Win7.

How SUN Bluetooth Inplementation for Desktops programming?

Hi everyone
I did read some things about JRS-82 that SUN watches, but it's true that api is only to J2ME?
I am looking for a Bluetooth implementation for Desktops, and i found Bluecove.
I would like to continue to code in "SUN Vision" and not to use thirds libraries for my project. It's Bluecove a library watched by Sun?
Can I use JRS-82 for desktops? It's easy to use JAVA COMM api to bluetooth app?
What you tell me?
Thanks very much.
FightSurf George Maia.
Edited by: GeorgeMaia on Mar 25, 2008 1:30 PM

We can start applications in a particular screen, since Snow Leopard, similar to what Linux has been able to do for some time; however, these screens are not really desktops, since we can't dedicate certain shortcuts/icons to only appear on certain screens.
Thanks, Eric. Perhaps I wasn't clear in the above. I realize we can start applications in certain desktops, but that is NOT what I'm after.
What I would like is the icons (i.e., shortcuts, directories, files) that appear on the desktop, to be different for each desktop. Such that if I go to Desktop 2, I can place all my game icons/shortcuts there. Then if I switch to Desktop 3, I might have all my Office programs there, but not my games. Does that make sense?
Eventually I might also want my Dock to have different icons based on what desktop I'm using, but I figure that's even more difficult.

Blackberry Curve 8330 as a Bluetooth adapter for the PC.

I'm probably going to make this sound complicated. But here is what i'm trying to do.i would like to use my bluetooth headset that i use for my phone with my computer using the phone as a bluetooth adapter with a computer that does not have bluetooth on it.
I have a PC without Bluetooth. I'm trying to connect my Blackberry Curve 8330m to the PC using USB. I turn on the bluetooth. pair it with my phone. but i don't know how to have the computer read the headset through the phone.. (aka i can't get the phone to be used as a bluetooth adapter.) any suggestions? If so please help! thank you!

You can also try using tetherbridge in app world for you phone. You will also be a leader to connect your playbook thru bluetooth. Tetherbridge will only connect via bluetooth.
Be a Shepard and not an iSheep.

Bluetooth 3.0+HS adapter for desktop PC or USB slo...

Similar Messages

Maybe you are looking for