Bluetooth acting very strange. Only one device works at a time.

HI,
I have a bluetooth device in my macmini. And also now have airport.
But it seems only one device can connect at a time.
But if a keep turning the 2 dvices ona nd off and mucking around with them then eventuly both work at the same time. One being an apple wireless KB the other a macmice wireless mouse. i have tried other mouses but same result.
Was wondering if anyone would know why this is doing this and mayb a fix.
any help would be great.

jpalan wrote:However, flash still seems to hijack everything.
Instead of guessing, start playing mplayer and some flash source (youtube or whatever) and post the output of 'fuser -v /dev/snd/*'.
Is your mplayer using alsa? 'cat ~/.mplayer/config' might have the answer (if you use the config) or just check mplayer output:
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
See that
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
- I have configured mplayer to use alsa.

Similar Messages

AirPort Express, only one device connected at a time.

I was setting up my uncles Airport Express yesterdy and got everything set up and the wifi signal broadcasting properly. It was then time to set up his iPad. I used a windows computer to set up the iPad and everything was going fine. After the iPad was running and I connected it to the network, I would lose the signal from the PC. From that point forward I would only be able to access the internet on the PC when the iPad's wifi was turned off.
I have had this problem with other routers before but was never able to figure out the problem. Is there something that I am missing? any help would be appreciated. I set the netork up with the default settings and set up a password to the network that has been entered correctly on both machines. Any help will be appreciated.

How do you have your Airport Express setup?
On the Internet tab, what do you have for "Connection Sharing" ?
Off (Bridge Mode) ?
Share a public IP address ?
Other ?
Is your modem from your Internet provider just a modem, or a router, or a wireless router ????
More info is needed.

Computer is acting very strange. Please help.

My computer has starter acting very strange. It has start to take ages to boot up, and it runs a progress bar on the grey apple screen (as if its was booting in safe mode, but its not). I cant seem to save any files with any Apps. When I try to save documents in office it tells me ether the file name or path doesn't exist, it is open by another program, or its read only. Office also keeps coming up with errors saying im out of memory. Other apps just come up with errors when I try and save files.
The last thing I did before my computer started acting up, was to increase the size of a Windows partition. Using Winclone I copied my Windows OS, then added the partition back to my mac, and re-partitioned it to a larger size. I formatted it into NTFS using Tuxera, and then used Winclone to put Windows back on. Everything seemed to go smoothly, and the Windows OS is fine.
Please Help!

Yes, iRadu is correct.
If Disk Utility can't fix it, you'll need a more robust utility for the repair. I would recommend DiskWarrior. It is the best at directory repairs. It rebuilds then actually replaces your old directory. I feel every Mac owner should have a copy.
Make sure you get the disk so you can boot up on it to run repairs. You can also install it on another drive and run it from there to repair this one. DW works faster that way.
I use DW once a month to try and catch errors in my system from getting too far out of hand.
DW is the only utility I would recommend to repair +Keys out of order+. It's a pretty serious error.
Do you have a good backup...one with no issues?
 DALE
p.s. Here's a rewiew of DiskWarrior 4.

It seems I cannot use Sky Go even if I use Firefox. The only one that works is IE 11.

I was using Google Chrome, but it seems they do not support Silverlight which Sky Go use. I was told that Firefox would work. It doesn't. The only one that works is Internet Explorer 11, which is very slooow. Why can't I use Firefox to view Sky Go?

My Sky homepage. If I want to watch cricket say, it come up with ' sky go unavailable at this present moment'. If I log on to my IE 11, sky go works Ok. I have the Silverlight add-on or plug-in whatever you call it.
Still no joy in Firefox.

Allow access to only one device through ACS 4.2

Hi All,
I am running ACS4.2 and want to configure a group for access to only specific devices.
I have setup a group in AD and matched this to a group in ACS. Under Network configuration, I've added the device I want the users to access.
In group settings I've added the device under
Network Access Restrictions (NAR)
Is this correct and anything else I should be doing? When logging into the device I get authorisation failed. We have a group already setup for access to all devices which works fine, but I want this second group to be for only one device. Not sure where I'm going wrong with this.
The authentication is all done through AD.
Thanks

Hi,
If I go to Network Configuration there is already a group setup for what looks to be all devices - *.*.*.*
See attached.
I try to add a new group for my single device but it says it overlaps. Am I able to setup more than one group, or how do I configure a second group for just this one device?
Basically at the moment I have an Admin ACS group in AD which has all our admins in it and have access to all devices using *.*.*.*. I now want my restricted AD group to have access to only one device...y.y.y.y but still want the other admins to have access to all devices. Is this easily achieved?
es

IPad acting very strange and gets hot.

My iPad mini is acting very strange, Siri starts as normal, but repeats "Siri not available" about 25 times before working. The iPad is slow and gets very hot when on. When you type it takes a minute for the iPad to catch up even if you type slow. What could be wrong?

Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

How do I change my Apple ID on only one device?

How do I change my Apple ID on only one device? I inherited my husband's iPhone 5. He cleared it but I set it up with same Apple ID so we could share same iTunes account. However, I realised that there are inconveniences such as not being able to Facetime each other. In addition, his iTunes account is UK-based and we'd like to also have a New Zealand iTunes account for various reasons.

Go to settings/icloud and sign out. Then sign in by creating a new Apple ID. Do the same in Settings for Messages, FaceTime and iTunes & App Store. Next, link your Apple IDs using Family Sharing so you can still share music and apps. Family Sharing - Apple Support

Multiple devices showing in iTunes when only one device is plugged in

How come multiple devices show up in iTunes left-hand DEVICES column when I plug in only one device? When I plug in my iPhone, two of the same devices by the same name show up in the left hand column within iTunes, ALONG with two other iPhones in our family. Can anyone offer insight please? Thank you in advance!

You may have enabled wifi sync on your iPhone.

How do I make one (and only one) device use my Apple ID and iCloud account?

How do I make one (and only one) device use my Apple ID and iCloud account? I currently have an iPad mini, iPhone 5, and MacBook pro attached to my apple accounts, but I want only my iPhone 5 to be assosiated with either one. Whenever I use any of the three devices, I get a notification on the other two telling me that these devices are now using these accounts from these services, etc. and I want these notifications to stop, along with the devices using to them. How do I do this? I completely reset the iPad mini so I don't know how I'm still getting notifications from it, and I deleted and signed of of all of my accounts everywhere I could find on my Mac. So, to restate exactly what I want to do, I want ONLY my iPhone 5 to use ANY of my Apple/iCloud accounts and ONLY it can receive emails, iMessages, and FaceTime calls. Thanks!

If you want to disconect your Mac from iCloud, go to System Preferences>iCloud and click Sign Out. If you only want to stop using iCloud email, just uncheck Mail. To stop iMessage, open the Messages app, go to Messages>Preferences, click the Accounts tab, click your iCoud ID on the left-hand side, then to the right click Sign Out. To stop FaceTime, open the FaceTime app, then click "Apple ID" then click Sign Out.
On your iPad, go to Settings>iCloud and tap Delete Account (or if you only want to stop using iCloud email, turn Mail off). For FaceTime, go to Settings>FaceTime, tap the ID and sign out. For iMessage, go to Settings>Messages>Send & Receive, tap the ID and sign out.

Only one device at a time can access wireless

Whenever I access the wireless network at home with a laptop or iPod, it kicks my wife off of the iMac's access. Basically, only one device can use the wireless network at a time.
I'm not that comfortable with network issues, but I'm not a total noob either. It doesn't seem like this should be a problem.
Can someone point me in the right direction? Thanks.

Depending on your type of router & setup, read the troubleshooting manual, contact their tech support department, check your network settings through System Preferences, run the network diagnostic test if applicable.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
If using one of Apple's routers cross-post in one of the Airport Forums.
Also, search out your type of issue in Knowledge Base.

When I plug in headphones or use audio jack only one speaker works.

I have an iphone 4g. When I plug in headphones only one side works. When I plug into my car audio jack...only one car speaker works.

There is only one speaker, the other side is the microphone.

I've placed two Edge oam files in to a dps doc and only one will work, can anyone help?

Hi, I've created one animation and tested it in dps and it works fine. I've repeated this and my second animation is fine also, but when I have them in the same doc only one will work.
Has anyone had this problem or know of any suggestions?
I'm using Edge CC and Indesign CC with the latest viewer release on my iPad.
Thanks

Hi, yes I'm using the most up to date tools (v27). I've tried also setting the delays to various different increments, this doesn't make a difference.
Although this is an old post I wonder if it is the same issue - http://forums.adobe.com/message/5615731#5615731
Thanks

Why does only one headphone work on my ipod. it is not my headphones.

when i plug my headphones into my ipod only one will work, unless i pull it out a little bit. i just bought a 70 dollar pair of wireless headphones and only one will work. i know it is not the headphones it is definetly the ipod. any way to help?

Call Apple.

This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangly (I need help trying to use it)

My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

HT2995 Only one speaker works when playing music. Is this normal?

Only one speaker works when playing music. Is this normal?

This being the Mac mini forum, I naturally presumed you were asking about a mini. But in any case, there's only speaker in an iPhone as well.
Regards.

Bluetooth acting very strange. Only one device works at a time.

Similar Messages

Maybe you are looking for