Bluetooth adaptor?

I just bought a mac mini and now I am looking at bluetooth mouse and keyboard on ebay. Because the mini has built in bluetooth, does that mean that I do not need to buy the bluetooth adaptor? And all I will need is the bluetooth mouse and keyboard?

You are correct, you don't need a Bluetooth adaptor for the mac mini

Similar Messages

  • Can I use an external bluetooth adaptor instead of the internal one?

    HI Folks,
    I need some better range for some bluetooth to serial adaptors so I purchased a class 2 (or was it class 1? memory fading but the higher output one) USB bluetooth dongle which advertised as being Mac compatible. Unfortunately when I plug that into my mini (previous generation core 2 duo mini) I can't see that I can disable the internal device. It shows up on the USB bus but as far as I can tell the system is continuing to use the internal device.
    Is there a way to tell it to use the external device? Can I crack the case and remove the internal module? I know the airport module is a separate card I can unplug but can I do the same to the bluetooth?
    Thanks for any suggestions!
    James

    heh, so I should have just tried it again. Last time I did this was a couple of OS versions ago though I have no way to know if that is what did it. Upon plugging back in the class 1 external interface is now appears that my machine is properly using BOTH interfaces. IN the discover new devices screen it now sees itself as an option which it never did before, and shortly thereafter the previously out of range devices popped up as well. So in order to use an external bluetooth adaptor it doesn't appear you have to do anything other than plug it in. It did not do this the last time I tried though.
    In any case, thanks!

  • Mac OS 10.4+ Bluetooth Adaptors

    Hello.
    I just wondered if anyone could tell me how fussy Mac OS 10.4 is with generic USB bluetooth adaptors. I just don't fancy paying £20+ for the D Link Bluetooth Mac supported version if I can get one from eBay for under a tenner.
    Many thanks.
    Power Mac G5 1.8 SP (900fsb) Mac OS X (10.4.9) 1gb RAM

    The version Apple sold used the same chip as some of the Macs, so its firmware could be updated. The original wouldn't handle Bluetooth headsets, but the firmware updater fixed it. If the eBay one will work with the devices you need, there is no need to pay more, but I don't know how you would find out before you buy it.

  • If I buy a bluetooth adaptor, will it work to enable my iPod Classic 120GB to become wireless?

    I was thinking of buying a bluetooth adaptor for my iPod Classic 120GB in the hope that it would enable my iPod to work with my bluetooth wireless headphones, would this work?

    Depends on the adapter.  There are some that connect to the dock connector, and those are made for iPods.  Read the product description for compatibility information, both with your iPod model and headphones.
    There are other adapters that connect to the headphones jack.  Those are more universal, because it connects to any device with a standard headphones jack.

  • Why I got the same reslults whether the Bluetooth adaptor plug or not?

    I am trying to make communication from USB Bluetooth adaptor on my laptop to other Bluetooth device on J2ME environment, but after I finished the java code, and there is a problem, the laptop cannot detect any Bluetooth device. I am not sure which part I should change.
    1) When I install the Bluetooth adaptor, I select com 4 as service port, but I did nothing with this in my Java code.
    2) My developing environment is: Eclipse 3.2, JDK 1.5, WTK 2.5, J2ME , and my main program is Midlet program.
    The following is my code; anybody can give me some suggestions.
    And the running result is :
    Running with storage root temp.MediaControlSkin21
    Running with locale: English_United States.1252
    Device Bluetooth Address: 0000000DECAF
    Starting device inquiry...
    no device found
    and the big question is whether I plug the Bluetooth adaptor or not, the program always get the same result?!! And I never made any code to get the �Device Bluetooth Address: 0000000DECAF�, what is this address? I even did not plug the Bluetooth adaptor~~!!!
    import javax.bluetooth.*;
    import java.util.*;
    public class BTConnector implements Runnable, DiscoveryListener {
    private javax.bluetooth.UUID uuidSet[] = {new javax.bluetooth.UUID(0x1101)};
    RemoteDevice remoteDevice;
    try {
    // create/get a local device and discovery agent
    LocalDevice localDevice = LocalDevice.getLocalDevice();
    discoveryAgent = localDevice.getDiscoveryAgent();
    System.out.println("Starting device inquiry...");
    discoveryAgent.startInquiry(DiscoveryAgent.GIAC, this);
    transactionID = discoveryAgent.searchServices(null, uuidSet, remoteDevice,this);
    // Searsh for services on the remote bt device.
    catch(BluetoothStateException exp){}
    public void doDiscoverService (RemoteDevice remote){
    // Called if a remote btDevice is found
    public void deviceDiscovered(RemoteDevice btDevice, DeviceClass cod) {
    try{
    deviceNames[index] = btDevice.getFriendlyName(false); System.out.println(index + " : " + deviceNames[index]);
    index++;
    devices.addElement(btDevice); //
    }catch(Exception e){
    public void inquiryCompleted(int discType){
         if (devices.size()==0) {System.out.println("no device found");}
         else {
              System.out.println("inquiryCompleted");
    public void servicesDiscovered(int transID, ServiceRecord[] servRecord) {
         if (servRecord.length==0);      
    public void serviceSearchCompleted(int transID, int respCode) {
    System.out.println("serviceSearchCompleted");
    }

    {color:#000080}Dean
    Can you read dates? Take a look at when this thread was started.
    Make sure that javax.bluetooth is on your computer, and is included in the Classpath.
    And please don't resurrect any more long dead threads. You are welcome to start one of your own.
    db{color}

  • Read and write data from virtual port (bluetooth adaptor)

    Hi,
    I want to read and wirte data to the bluetooth adaptor by java. I connected my bluetooth adapter to COM3.(virtual port). Anybody help me with this.I need very urgent.
    Thanks,
    with regards,
    thelay

    Deepa_05 wrote:
    Hi,
    I didn't get jar fileAnd?

  • Can a j2me emulator work with a real bluetooth adaptor?

    Can a j2me emulator work with a real bluetooth adaptor?
    Currently I need to work on a project that will need bluetooth and a SE P910i phone.
    But the phone is not available to me at all times.
    So, I am wondering if it is possible to have the emulator connect to a real bluetooth adaptor that is connected to the computer and communicate with other bluetooth phones....
    Any help is very much appreciated :)

    I have not found a solution to it. And I concluded that it cannot be done.
    Bluetooth, on the emulator is emulated too. so if your program needs to test on 2 phones, then you can just open up 2 emulators and they will be able to find each other in their emulated world.
    Try with the bluetooth demo that comes with J2ME. I cannot get to see any pictures when I run them on real phones but it worked flawlessly on emulators......

  • I have a Lexmark printer which is a little old. So when i connect my iphone to it via the USB cable my printer doesn't recognise it. If i bought a bluetooth adaptor for the printer would i be able to print photos via bluetooth?

    I have a Lexmark printer which is a little old. So when i connect my iphone to it via the USB cable my printer doesn't recognise it. If i bought a bluetooth adaptor for the printer would i be able to print photos via bluetooth?

    The only way to print from an iPad is to have a printer that supports AirPrint. Here's a link to an Apple support page on AirPrint.
    http://support.apple.com/kb/ht4356
    AirPrint is way to print wirelessly via Wi-Fi  but it requires that the printer supports AirPrint. The iPad cannot use Bluetooth to print and it will not print when connected via USB.

  • BT Handset Support... Not supported by Builtin Bluetooth Adaptor?

    There's a lot of discussion about this, and I'm still confused.
    I've got a brand-spanking new G5 Dual Core machine. Bluetooth is built-in. (Software Version 1.6.6f22, Firmware Version 1.2 (1.4103) ).
    Yet, the Helper application for "Set up Bluetooth Device" tell me that "Headsets are not supported on your Bluetooth Hardware".
    (Alexander Traud: I know you're just about ready to hit that Reply button and paste in the same helpful instructions you've given everyone else, however it won't work on my machine because I get an error that says, "This Bluetooth device is not supported" when I try to use the Bluetooth Firmware Updater.)
    Assume the PRAM has been zapped and the permissions fixed.
    So, does this mean that Headsets are supported, they're just not supported by Apple's own Built-in Bluetooth Adaptor?
    Dual Core G5   Mac OS X (10.4.3)  

    Please ignore post... Was using wrong BT Adaptor.

  • D Link 120 Bluetooth adaptor Interferes with the network preferences for BT

    Hi
    I just purchased a D Link 120 Bluetooth adaptor adaptor for my G4 machine running OSX10.4.10.
    When I connect it to a usb port, it works just fine and can see my mobile phone transfer files etc. The real problems begin when I restart my machine. On initial start up I cannot connect to the internet and in the network pane of the system preferences, I get a message saying a new port has been detected called Built in Ethernet-1
    When i click apply changes, the computer once more connects to the internet, however the name under which it connects is now saying Ethernet Adaptor ((null)). In short, is there a method to prevent the Bluetooth adaptor from interfering with my settings to connect to the internet?
    Thanks
    Jon

    Dear Justin,
    Did you end up getting this router? If so how have you found it?
    Thanks,
    Scot.

  • IPod Bluetooth adaptor

    Heya Guys,
    I'm looking at getting a new car system that let's you play music from bluetooth devices! I want to know if anyone here has experience with the currently available iPod bluetooth adaptors - from what I can see there is a Motorola one and a Jabra one.
    Do any of you guys have anything to say about either one - will the audio be very poor quality due to the fact that it is being streamed via bluetooth?
    Cheers guys.

    I've had two.
    The iCombi AP21 ($25 from singapore) was a great and cheap device although I was forever pairing the thing with my bluetooth headset. Audio quality suffered due to being compressed. Took it's power from the ipod. Iphone whinged when attached but worked. IIRC it showed me the song title on my bluetooth headphones
    The jabra 125 that I have now is a lot better. has a 7 hour internal battery life, pairs fautlessly with my headset (and only had to do it once). Music quality better but not fantastic. iPod touch I have now didn't complain once.
    As for the moto. I've no experience of it.
    I'd much rather use my bluetooth headphones with my ipod as it means you can tuck your ipod out of the way.
    Hope that helps
    Paul

  • RSAP Bluetooth Adaptor?

    Hi Guys,
    Is anyone aware of a simple adaptor that connects to the iPhone's Dock Connector that would enable bluetooth communication using the rSAP/SAP profile? I have an iPhone 3GS and a UK Mark 6 VW Golf that came with the VW premium bluetooth phone kit installed. As is well documented, in Europe the VW phone preparation kit only seems to support the rSAP profile such that it's compatible with Nokia telephones and not much else. Since I'm not expecting Apple or VW to help any time soon I am looking for an alternative solution but so far I am only finding adaptors for enabling the A2DP profile.
    All suggestions are gratefully received (within reason, of course). Is there a reasonable solution to this problem or should I just give up on this issue now?
    Regards,
    Kelmon

    I don't see that happening - far too much hassle. What I don't understand is why there isn't a cheap aftermarket solution to this problem, which as best as I can tell seems to apply to other brands of car (Audi and Mercedes, for example). Dongles that enable A2DP seem to be a dime a dozen but nothing, so far as I have found, for adding anything else. Where's an enterprising Chinese solution when I need one?
    Still, I'll have a look into the replacement solution - perhaps it's not as bad as I fear.

  • Bluetooth adaptor? (Skype, etc.)

    Hello all --
    I don't have Bluetooth on my iBook. I do have a new Bluetooth headset (Plantronics' Pulsar 590). The headset came with an audio adaptor, but it's just audio (one-way, no voice, no mic, etc.) I'd ideally like to use the headset with Skype.
    I'm thinking I should get a Bluetooth USB adaptor. Any experience with good ones / bad ones / is this going to work at all?

    If you would have searched in this section, you would know you should buy a D-Link DBT-120 USB adapter. After applying the Apple Firmware Updater to it, it will work with your headset.
    There are other Bluetooth USB adapters out there, some will work (many Bluetooth 2.0+EDR should do), some will not. It is a bit of lottery, so sticking to the D-Link DBT-120 is a good guess, I think.

  • Is there a bluetooth adaptor for an old iPod classic (160 GB) that also works like a radio remote?

    Is there a bluetooth adapter for an old iPod classic (160 GB) that also works like a radio remote?  I have a bluetooth headset and I want to listen to FM radio on my iPod.
    Or is there a better way than to use an adapter in order to listen to  the radio on an iPod with a bluetooth headset?
    TIA!

    Have you updated your iPod and iTunes sofware?
    most cases, iTunes can play these high quality songs, which is meant for newer mobile devices like  iPhones, iPod Touch, nano and iPad, which the older iPod cant play, but only playable with iPod classic sofware version 2.0.4
    most likely it is an incompatible song format, read this Apple support article.
    http://support.apple.com/kb/HT1334?viewlocale=en_USet
    If  your iPod software is version 1.1.2, then you have to use lower quality format.
    Can you select the problematic song, and Advance -> create iPod version

  • Can I use a usb bluetooth adaptor with mac pro which already has bluetooth?

    Hi All,
    I have an early 2008 Mac Pro. I have a bluetooth sound device that I'd like to use across the other side of the house. The problem is that the in-built bluetooth transceiver is limited in area and i have a usb transceiver that has 15m broadcast range. Is there a way i can make my Mac Pro use the usb dongle and not the internal hardware..?

    You can disable the internal bluetooth radio. As long as you have drivers for your USB Bluetooth adapter you should be able to use it.

Maybe you are looking for

  • How can I change the color of the highlighted text when using the FIND function in Terminal?

    When searching for text in the Terminal's buffer, the matched text is highlighted using a color which seems to be computed from the background's color. I'm using a black backgroud and the finder's highlighter is grey. How can I change this? I'd like

  • How do I create to do in mail.app in Lion OS X

    I am new to Mac itself and bought Lion OS X. How do you create a "to do" in mail.app. when I read some user posts, I got to understand that right click on the message gives you a "to do" option. however I do not see it.

  • Custom repeats on the ipod touch

    I just got a new ipod touch and overall i love it. Just one glitch that I am finding. I would really like to use this in place of my PDA, but I can not figure out how to enter custom repeat events in my touch. The repeat options are only, daily, weak

  • The installation process stops at 90%

    I tried several times to install a trial copy of Photoshop Elements 8.0 without completing the installation. At a certain point, around 80-90%, the installation process stops at and it return back to zero. Thanks for any help. Fabio

  • Refreshing only portal content area and not the naviagtion area.

    Hello all,           I want to refresh only portal content area without refreshing the navigation contents.    Eg;- When i click on the any document present in the REPORTS folder in Detailed Navigation Area only the portal contents should get refresh