Bluetooth and Audio no longer work after 10.8.5 update

Hi,
I just updated my MBP (MacBookPro3,1) from 10.8.4 to 10.8.5. After reboot my Bluetooth is "not available" with a squiggly line through it in the menu bar and my audio is greyed out. Has anyone else had this problem? I tried using the combo updater, resetting the PRAM, clearing system caches etc. and nothing seems to have brought it back to life. Any help would be greatly appreciated!!

I've been struggling with this for 2 days, since I upgraded to 10.8.5 which I needed to go to get the latest iTunes, which I needed to upgrade my iPhone and iPad to IOS7 . . . yes, right down the garden path I walked
MacBook Pro 17", early 2009.
After the 10.8.5 upgrade Bluetooth is Not Available, same as seanluck13.
-System Preferences: no sign of Bluetooth
-System Search: no sign of Bluetooth
-System Profile Information: Bluetooth: No Information Found
-So Bluetooth is absent, removed, not present -- AGHHHHH!!!!!
Apple BT keyboard and trackpad can't be used. MacBook trackpad is worn out and I get wrist strain trying to activate it!
I read on a forum that a fix was to reinstall the system over the internet after a CMD-OPT-R restart. Did that -- 5 HOURS LATER -- NO CHANGE, BLUETOOTH STILL ABSENT !@(%&( )TY(@Q#*!!
Please someone help me before I throw this Mac down the garbage shoot. At the moment that's only a fantasy.

Similar Messages

Epson printer driver no longer working after 10.4.11 update

It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
Does anyone know a workaround?
Thanks very much
Wolfgang

I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

Synchronize By Audio No Longer Works After 7.2 Update

After installing the Premiere Pro CC 7.2 update, the synchronize by audio no longer works correctly. When you highlight the clips and sync by audio it acts like it's doing something but then puts the clips nowhere near close being a match (usually one clip on one side of the timeline and the one on the other).
Is anyone else having this issue? I've run into it on two seperate computers bothe running Premiere Pro CC 7.2 on Windows 8.1 machines.
- Dennis

Bumping this. I'm a brand new CC subscriber and the sync function was a big part of why I moved to CC. 50% of the time it works, but the rest of the time, it pushes the video clip much farther down the timeline.
Update 1: To clarify, I am doing this from the sequence itself. So tracks A1/V1 are the original audio/video from camera, then A2 is my sound I want to sync.
It does not seem to have a problem syncing the same "problem" clips when I use the "Merge" by Audio from the Bin.
Update 2: I found that, if I unlink the original A1/V1 clip, then select all three (A1/V1/A2) and Synchronize, it works.
Obviously, this is an unacceptable workflow, but I hope that helps Adobe figure out what's going on here.

Audio no longer working after upgrade

Hi,
After doing an upgrade this morning, my audio no longer works.
Booting into KDEmod gave the first clue when I got an error message saying audio not found.
The output of alsamixer say "alsamixer: function snd_ctl_open failed for default: No such device", yet my modules have not changed in rc.conf.
Could this be related to HAL also being updated?
Thanks,
JTD

Do you by accident have more than one sound-device? I didn't lose sound but "aplay -l" showed that ALSA has changed the order of the cards. Hence I suddenly didn't get sound from where I expected it.

Many Apps are no longer working after webOS 1.4 update! - please help!

Hi,
Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
Here are the ones that just return a blank/white screen after launching so far:
SplashID
Daily Devo
Daily Light (Love)
Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
These are just a few of the Apps that I am having problems with and there are probably many others. I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
Anyone else experiencing this issue as well with any Apps?
Thanks in advance for any help that you can provide.

SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password. I see no update for it in the App Catalog.
EDIT: Never mind. It appears that it only did that on the first launch. I closed it and restarted it, and now the screen in SplashID is correct.

CP60-615DX Touchpad and external mouse no longer work after WIndows 7 SP1 update

Let me start by saying I am in the IT field, though clearly far from being great at it. I was updating a CP60-615DX at work with Win 7 x64 SP1. It installed with no errors or anything I'd consider abnormal. Once it was finished, the touchpad no long worked, as well as any mouse I'd hook up via Usb. So I checked Device manager, and the Touchpad is listed with the yellow exclamation mark, as well as mice I hook up. So I did what any respectable IT guy would do, I went to HP and downloaded x64 drivers for the Touchpad port and installed them. But they didn't fix the issue, literally nothing happened. So I installed the latest chipset drivers. Still nothing changed. So I uninstalled the device and manually added it by doing the advanced driver install for a new device, pointing it to the directory where the .exe file had placed the drivers. ...Nothing. So I uninstalled SP1,.... nothing. After uninstalling SP1, redid every aforementioned step, nothing. So my question is, **bleep**? Anyone know another way to fix an issue where the scrolling devices stop working and the drivers won't fix the issue?
Btw, the user had never set up windows restore, and my only other thought is pulling personal documents off and restoring to factory defaults. One more bit of info before I forget, when I went into Windows Recovery (which loads a pre-environment mini OS for you to restore and fix issues), the mouse worked, telling me it's not a hardware issue, it's a Windows vs devices issue.

Hi,
According to your description, since system reinstallation is not helpful, it's probably a hardware problem, it would be better to check if it is the device itself problem.
Roger Lu
TechNet Community Support

Numbers 09 and Pages 09 no longer work after 10.6.5 update

I have the last version of iWork 09. After the 10.6.5. update Numbers 09 and Pages 09 no longer work.
Keynote 09 is fine.
Both Numbers 09 and Pages 09 open, the window for choosing a template also opens.
I am not able to choose a template. Waited for several minutes ... no chance.
Removed the software, re-installed from DVD, updated to the latest version ... this did not solve the problem. Contacted Apple support , went through many steps with no success.
Were you able to use Numbers 09 and Pages 09 after recent Mac OS X update ?
Any ideas what I could do ?
Thank you for help!

May you try to run the applications from an other user account ?
If they behave flawlessly, the culprit is in your original user account.
In such case, it's often one or several preferences files which are corrupted.
Try to
quit the applications,
move the preferences files :
<startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Numbers. plist
<startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.pl ist
to the desktop
restart the apps.
If they behave flawlessly, you know the culprits. Trash them.
Yvan KOENIG (VALLAURIS, France) dimanche 14 novembre 2010 19:34:52

Microphone and speaker no longer working after update to 4.3.3

2 hours ago i have updated my iPhone 4 to iOS 4.3.3
It is a standard, never jailbreaked or whatever, iPhone 4, which was running 4.3.2
After the update suddenly i heard no sounds when pressing any buttons.
I checked the settings, but everything was still the same.
I then tried to call a friend, but when the connection was made i neither heard him nor did he hear me.
After that i tried :
1) changing the ringtone, to see if any sound would come fromt he speakers : nothing
2) running the dictafoon, but when pressing record i get : no micophone available. Connect a microphone to record memo's
3) connecting a headset to see if that would work : nothing
4) connecting a bluetooth headset : nothing
5) restoring files and trying all again : nothing
6) restoring all and trying again : nothing
7) starting iPhone in recovery mode, resetting all (like it was a new iPhone) and trying again : nothing
Anyone got any bright ideas left ?

If you have restored in iTunes on a computer and the problem remains then it's a hardware fault and it needs to be repaired. When you update the iOS version on an iOS device it checks the hardware components, this is when it'll detect un-diagnosed hardware faults and the components will stop working... even if they were working previously

ITunes 11.02 update - video and audio no longer working

I updated to iTunes 11.02 last night.
Now, I can't play any video or any audio files, whether using iTunes or Quicktime. Even online Vimeo and YouTube content won't play. Clicking the play button does nothing - the movie or song's progress indicator doesn't move.
In Sytem Preferences > Sound: I get the following message for input and output devices "No input device found" and "No output device found"
There doesn't seem to be a way to check if the graphics card is recognised but it's still showing up in the system profiler.
Looks like the iTunes update has completely nixed my laptop's video and audio capabilities. Does anyone have any recommendations?

I do a lot of SONY HRD FX1 native 1080i HDV capture with Final Cut Pro 5 on my PowerBook 1.3 GHz G4..
Before Apple started supporting HDV, getting the audio and video lined up was such a nightmare that it wasn't even worth working on projects.
My material works great inside FCP 5, but I have had similar problems to what you describe when making the DVDs
However, I use DVD Studio Pro and was able to move the audio relative to the video slightly to get the most important parts to line up. However if your audio and video clips aren't the same length then you will have variable slippage for long clips.
I have been using MPEG Power Professional (Heuris Inc) to do my MPEG2 video encodes as well as my audio encodes and I haven't had the problem lately.

Bluetooth and GT750M is not working after suspending to RAM.

Hello! I am yet another lucky owner of laptop with optimus Intel+nVidia technology. I had really frustrating issue with Bumblebee because my nvidia just randomly refused to change power state in the past, luckly after a few months someone added workaround to the Bumblebee's troubleshooting section on ArchWiki and it worked flawlessly for a while. But now, most likely because of some kernel updates, I'm experiencing similar issue with both Bluetooth and nvidia card but this time only after suspending to RAM.
% optirun glxgears
[12125.501131] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card
[12125.501173] [ERROR]Aborting because fallback start is disabled.
% bluetooth
bluetooth = on
% bluetoothctl
[bluetooth]# devices
[bluetooth]# power on
No default controller available
[bluetooth]#
Some relevant outputs:
% dmesg | grep -i bluetooth
[ 5.827610] Bluetooth: Core ver 2.19
[ 5.827633] Bluetooth: HCI device and connection manager initialized
[ 5.827641] Bluetooth: HCI socket layer initialized
[ 5.827643] Bluetooth: L2CAP socket layer initialized
[ 5.827649] Bluetooth: SCO socket layer initialized
[ 9.006994] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.007003] Bluetooth: BNEP socket layer initialized
[10940.998460] Bluetooth: Error in firmware loading err = -110,len = 448, size = 4096
[10940.998468] Bluetooth: Loading patch file failed
[10940.851853] wlp4s0: associated
[10940.998460] Bluetooth: Error in firmware loading err = -110,len = 448, size = 4096
[10940.998468] Bluetooth: Loading patch file failed
[10940.998475] ath3k: probe of 1-4:1.0 failed with error -110
[11094.380198] mce: [Hardware Error]: Machine check events logged
dmesg messages after the "optirun glxgears":
[12118.593906] bbswitch: enabling discrete graphics
[12118.604058] pci 0000:01:00.0: Refused to change power state, currently in D3
Any ideas what's going on? Thank you!

ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367

Keyboard and Mouse no longer work after update

Earlier today I ran pacman -Syu for the first time since the 18th, and initially everything seemed to be working properly. However, upon my next boot, both my mouse and keyboard (both USB) no longer worked, leaving me stuck at the login screen unable to move the cursor or switch to a different terminal. Unplugging and reconnecting my keyboard and mouse did nothing.
A related topic (which could be solved by reconnecting the devices) suggested that booting with runlevel 1 might help, and this allowed me to use the terminal, but any attempt to start X resulted in getting stuck at login in the same way.
Disabling and re-enabling hotplugging via xorg.conf had no impact (there was a note in Xorg.0.log indicating that since hotplugging was enabled, mouse and keyboard drivers were being disabled. Apparently it's a fairly standard warning).
The only package that was updated that seemed to be input related was xf86-xinput, but downgrading to the previous version did not fix the problem.
Does anyone have any ideas as to what might have caused this issue?
Thanks for any help you can provide.

Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

System password no longer works after 10.9.4 update

YOU CAN READ MORE ABOUT IT HERE:
Re: Issues after Software OS X 10.9.4 (13E28) upgradeRe: Issues after Software OS X 10.9.4 (13E28) upgrade
Same problem, here, updated, pw n longer works, HOW TO FIX? Can’t install anything, any ideas?
HERE IS MY ENTRSFO, HOPE IT HELPS:
EtreCheck version: 1.9.12 (48)
Report generated July 18, 2014 at 11:49:39 AM PDT
Hardware Information:
27" iMac (Early 2011)
iMac - model: iMac12,2
1 2.7 GHz Intel Core i5 CPU: 4 cores
16 GB RAM
Video Information:
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software:
OS X 10.9.4 (13E28) - Uptime: 1 day 11:8:27
Disk Information:
ST31000528AS disk2 : (1 TB)
EFI (disk2s1) <not mounted>: 209.7 MB
Macintosh HD (disk2s2) / [Startup]: 999.35 GB (59.06 GB free)
Recovery HD (disk2s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5690H
HGST HUS724020ALE640 disk0 : (2 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 2 TB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
HGST HUS724020ALE640 disk1 : (2 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
FireWire Information:
LaCie d2 quadra (button) 400mbit - 800mbit max
EFI (disk4s1) <not mounted>: 209.7 MB
Snow Leopard Copy (disk4s2) /Volumes/Snow Leopard Copy: 666.67 GB (18.36 GB free)
Desktop Download(s) from iMac (disk4s3) /Volumes/Desktop Download(s) from iMac: 666.67 GB (60.95 GB free)
OS Lion (disk4s4) /Volumes/OS Lion: 332.71 GB (3.91 GB free)
Recovery HD (disk4s5) <not mounted>: 650 MB
MBP COPY (disk4s6) /Volumes/MBP COPY: 333.09 GB (164.16 GB free)
Avid Mbox Pro 400mbit - 400mbit max
Thunderbolt Information:
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files:
/etc/hosts - Count: 18
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] at.obdev.nke.LittleSnitch (4050 - SDK 10.8) Support
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[loaded] com.HGST.driver.GDOCKDriver (1.0.3 - SDK 10.7) Support
[loaded] com.avid.driver.firewire.mboxpro (1.3.0 - SDK 10.7) Support
[loaded] com.digidesign.iokit.DigiDal (10.0f56 - SDK 10.6) Support
[not loaded] com.line6.driver.xtaudio (7.3.6 - SDK 10.7) Support
[not loaded] com.line6.iokit.ClassicNotSeizeVariaxIF (1.0.1) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
[not loaded] com.roxio.TDIXController (1.7) Support
[not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) Support
[loaded] com.waves.driver.soundgrid (2.0.0) Support
Startup Items:
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.line6.l6ksettingmgr.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] com.timesoftware.timemachineeditor.helper.plist Support
[running] com.waves.daemon.SoundGridProtocolService.plist Support
[loaded] PACESupport.plist Support
Launch Agents:
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.avid.mboxpro.helper.plist Support
[running] com.canon.MFManager.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.wacom.pentablet.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
iTunesHelper
SpeechSynthesisServer
uTorrent
G-Technology Assistant
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Cannot contact Adobe
EPPEX Plugin: Version: 10.0 Support
iLokClientHelper: Version: 3.6 - SDK 10.5 Support
DivX Web Player: Version: 3.1.0.13 - SDK 10.5 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
RL Secure Plug-In Layer: Version: (null) - SDK 10.5 Support
MagellanPlugIn: Version: 1.2 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Safari Extensions:
Conduit Search for Safari: Version: 1.0
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6 Support
UploadManager: Version: (null) - SDK 10.5 Support
Google Earth Web Plug-in: Version: 7.1 Support
ContentManager: Version: (null) - SDK 10.5 Support
RocketEngine: Version: (null) - SDK 10.5 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Java Support
Line6AudioMIDI Support
Mbox Pro Support
YAMAHA-USBMIDIPatch Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 875.71 GB
Destinations:
TIME MACHINE [Local] (Last used)
Total size: 1
Total number of backups: 3
Oldest backup: 2013-10-21 19:02:42 +0000
Last backup: 2014-03-19 11:19:09 +0000
Size of backup disk: Too small
Backup size 1 < (Disk used 875.71 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      2% SGProtocolService
      1% DashboardClient
      1% WindowServer
      1% fontd
      0% Safari
Top Processes by Memory:
999 MB com.apple.SpeechRecognitionCore.speechrecognitiond
459 MB DaisyDisk
360 MB mds_stores
180 MB Safari
164 MB Mail
Virtual Memory Information:
8.79 GB Free RAM
4.12 GB Active RAM
1.46 GB Inactive RAM
1.62 GB Wired RAM
1.76 GB Page-ins
9 MB Page-outs
Like Show 0 Likes(0)

Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
Your or anyones HELP! is greatly appreciated!

USB Hub(s) no longer working after 10.8.5 update

Installed the 10.8.5 update via software update on my iMac 3.4Ghz i7 (no DVD drive) and had the Bluetooth unavailable issue I have seen mentioned elsewhere. Managed to restore Bluetooth via a restartwith all USB devices disconnected. However I have two USB hubs that no longer work. One is a colourful freebie so maybe not a surprise but the other is a powered D link USB 2.0 DUB-H7 which worked fine before the update. Now no device that is connected to it is recognized no matter which USB port the hub is plugged in to. Leaves me somewhat short of USB ports.

I've been struggling with this for 2 days, since I upgraded to 10.8.5 which I needed to go to get the latest iTunes, which I needed to upgrade my iPhone and iPad to IOS7 . . . yes, right down the garden path I walked
MacBook Pro 17", early 2009.
After the 10.8.5 upgrade Bluetooth is Not Available, same as seanluck13.
-System Preferences: no sign of Bluetooth
-System Search: no sign of Bluetooth
-System Profile Information: Bluetooth: No Information Found
-So Bluetooth is absent, removed, not present -- AGHHHHH!!!!!
Apple BT keyboard and trackpad can't be used. MacBook trackpad is worn out and I get wrist strain trying to activate it!
I read on a forum that a fix was to reinstall the system over the internet after a CMD-OPT-R restart. Did that -- 5 HOURS LATER -- NO CHANGE, BLUETOOTH STILL ABSENT !@(%&( )TY(@Q#*!!
Please someone help me before I throw this Mac down the garbage shoot. At the moment that's only a fantasy.

HT202157 Apple TV No Longer Works after the most recent update (2.1.13)

Why can I no longer access the movies and tv shows I’ve already purchased in iTunes after the update? It was not until the most recent update as on 2/1/13 that I started having this issue. Please correct this so I can use what I paid for. Thanks

Same problem here, Apple, I'm pretty upset at the moment. My daughter's 12th birthday, and she wants to watch a movie we purchased through your software.
We love the normal apple usage...but, since your hardware and software are so stringently ruled...I have some expectations on the fact that it will actually work after the updates.
Customer service outside the apple store has been suspect for some time.
Please step up here, we've invested quite a lot in you, and we're feeling a bit let down at the moment.
No notice, no warnings, for all the messages you do send out, "hey the stuff you bought from us and can only play it back on us isn't going to be working for a while"...would be nice.
Or just fix it.
Scott West

CS4 no longer works after installing CS6 manager update

Is Adobe targeting older versions of the software with the new manager?
Some of my plug-ins only work in the older versions of the software and I use a triple boot system with separate drives for Windows XP, Vista and W8. They each have CS3, CS4 and CS6 (I missed out on W7 and CS5).
After I updated CS6 to the latest version of the download manager CS4 no longer runs. I discovered today that it will if I am online. I am running a legal copy of the CS4 Master collection and has been running with no problem for years. I have a back up of the drive and used it to replace the whole drive in case there was an error somewhere, something I have had to do every six moths or so. That did not solve the problem. The licence allowed two copies and I do have it on a second machine at home and that still works. That machine does not have the recent CS6 update yet.
The original licence agreement for CS4 didn't require you to be online. My broadband connection is intermittent because I live in a rather remote place. It has been down for a few days and I could not work even in CS4.

Is Adobe targeting older versions of the software with the new manager?
Some of my plug-ins only work in the older versions of the software and I use a triple boot system with separate drives for Windows XP, Vista and W8. They each have CS3, CS4 and CS6 (I missed out on W7 and CS5).
After I updated CS6 to the latest version of the download manager CS4 no longer runs. I discovered today that it will if I am online. I am running a legal copy of the CS4 Master collection and has been running with no problem for years. I have a back up of the drive and used it to replace the whole drive in case there was an error somewhere, something I have had to do every six moths or so. That did not solve the problem. The licence allowed two copies and I do have it on a second machine at home and that still works. That machine does not have the recent CS6 update yet.
The original licence agreement for CS4 didn't require you to be online. My broadband connection is intermittent because I live in a rather remote place. It has been down for a few days and I could not work even in CS4.

Bluetooth and Audio no longer work after 10.8.5 update

Similar Messages

Maybe you are looking for