Bluetooth and DVD issue on Qosmio G-series

The bluetooth Devices icon is not listed in the control panel and I loaded a DVD but it does not eject.
[Edited by: admin on 07-Jul-2007 19:16]
The threads were merged due to better clearness.

Hello
As far as I know the BT must be enabled at first. After enabling it for the first time all BT components will be installed automatically. Please enable BT using follow steps:
1. enable WLAN using WLAN switch (WLAN LED must be ON)
2. use FN+F8 key combination to switch to BT option
After doing this BT hardware should be installed properly (if your notebook is preinstalled with recovery DVD or you switch it ON for the first time).
It is not useful if you write about some issues (like DVD) and we do not know which Qosmio G you have (different ODDs). Dennis probably thought you have G30 but after your last posting I presume you have G20. As far as I know here is nothing to do. You must visit service. They can help you.
BTW: have you used standard CD (12 cm)?

Similar Messages

  • Ideapad Yoga 13 bluetooth and wifi issue

    My IdeaPad Yoga 13 has a problem with playing music via bluetooth A2DP profile. Audio plays well and without hiccups when I'm not downloading anything from the internet with high speeds but if I download something music playback starts to crackle and break. That is very annoying and I'm wondering why high wifi bandwidth would cause this kind of problem for bluetooth. If I've understood right, bluetooth and wifi modules reside on the same wireless card on Yoga but still, shouldn't they be separate in a way that they wouldn't be able to affect each other's performance? I'm using Nokia MD-310 Wireless Receiver with my Yoga.
    My second problem is about the same wireless card, too. My wifi works otherwise well and I haven't had any speed problems with it (unlike many others on this forum) but after a few weeks of using my Yoga it started to have problems with reconnecting to my wifi after waking up from sleep. It doesn't find any wifis unless I run the wireless troubleshoot which resets the wireless card.
    I've tried reinstalling the driver and setting windows 8 power management settings to maximum performance but nothing seems to solve these two problems.
    Does anyone have solution for these?

    I forgot to mention I used a fresh pair of batteries for the mouse (rules out simple solutions).

  • X6 bluetooth and USB issue

    My old 5310 had no problems connecting through bluetooth or cable to my pc. Now I updated to a X6 and nothing but issues connecting.
    The bluetooth works sometimes, when it feels like it, when it doesn't work and I disable bluetooth on the phone, I can't enable it again, it just says something along the lines it can't execute bluetooth operation. First time I experienced it, I gave up and a little later I tried again, bluetooth enabled as normal and immediately connected and worked as normal.
    Then I try to connect through USB cable, on which it only tries to find drivers (which it used to have when I first got the phone) and eventually I get a message the phone is still transferring files (which it isn't) and I need to enable PC Suite mode while that's what it's on.
    I think there's something very wrong with the software..

    Hope your issue is solved.
    My issue is this:
    MY HARDWARE / SOFTWARE:
    - Nokia 6350 phone
    - IOGEAR GBU321 usb bluetooth
    - Windows XP on Dell Latitude D610
    - PC Suite 7.1.51.0
    PROBLEM:
    PC Suite works fine with my phone if I'm in range. If I walk far away and bluetooth connection is lost, when I return to range, the synch btwn PC and Phone MAY or MAY NOT resume. Most of the time it does, but sometimes it does not.  I've tried to close/re-start PC-Suite to no avail. I've tried to re-detect my phone via PC Suite...nothing.
    The workaround fix I've found  to resume the PC--Phone connection is this:
    - On the bottom left of task bar, right click on the bluetooth icon and "Explore My Bluetooth Places"
    - Delete "Nokia 6350 OBEX File Transfer"
    - right click on the bluetooth icon and select "Quick Connect"-->"File Transfer"-->"Find Devices"-->"Show All Devices"-->select the Noka 6350 (for some reason it's visible here)-->and click "Finish". 
    Then suddenly, my PC-Suite Icon show connected again and I'm back in business.
    WHAT is causing this and HOW to fix this permanently ? Something is timing out in PC-Suite.
    Thanks,
    Neel

  • Flex 14, Bluetooth and Wifi Issues

    I bought a Flex 14 from the Lenovo store website a month ago, and I seem to be having problems with my wireless adapter. I can't remember if it is because of the update to 8.1 since I updated my laptop to 8.1 on the day that I received my laptop. No matter how far away I am to the router, my wifi would disconnect. It would disconnect for around 30-60 seconds and happens very often, which is kind of annoying. Other laptops in my house don't experience this kind of issue, so it can't be my wireless router or internet service provider. Bluetooth seems to have issues as well. I bought a bluetooth mouse for my laptop around 2 weeks ago and it disconnects just like my wifi. I've tested the mouse with my phone for a full hour and I did not encounter any problems, so I concluded that it must be my wireless adapter that has a problem.
    I've tried updating all the drivers from Lenovo support page, but that didn't fix it. So, I tried getting the drivers from Intel, since my adapter is the Intel Wireless-N 7260. That also did not work.
    Any ideas? I would really appreciate any sort of help right now.
    Solved!
    Go to Solution.

    I bought Lenovo Flex 14 last month and from day 1 it is showing issues with its wifi. It gets disconnected from my network automatically and sometimes it does not detect even a single network. While at the same time my other devices connected to the same network functions well.  
    I called customer support and they tried to fix the problem by changing performance and roaming related solutions as has also been pointed out in the earlier replies. Even in spite of all these efforts nothing has worked till date. I either have to restart or have to put my laptop in airplane mode for few seconds and than try to connect (A trick which works for me at times !! )
    Is there any solution which anyone can suggest ? Is this a hardware problem or a software problem ? Please help !!

  • **** Bluetooth and keyboard issues after latest itunes and 10.6.5 update.-

    read below
    Message was edited by: Paulman!

    Have been experiencing intermittent keyboard, trackpad and usb mouse function issues after installing the latest system and itunes updates, which was yesterday or day before.
    (Lost even some work because the only way to get things moving was to restart.)
    Tried solution (verify and repair disc permissions) that coconutmunk recommends under similar topic from 2007:
    http://discussions.apple.com/thread.jspa?threadID=1190210
    That solution fixed worst part of the problem: getting all 3 parts irresponsive.
    It seems as problem is still not entirely solved as computer has once tried to lock all 3 again, however before I had chance to get concerned it locked up all 3 again by itself.
    Yet, usb mouse keeps on getting disconnected every now and then randomly, even after 2 runs with disc permission solution.
    Conclusion from 2007topics where people had issues with keyboards and/or mouse devices, was that it was Leopard system having those problems, nothing like that was reported in about Tiger system, as it seems.
    Now, those problems were fixed back then with an update, but seems this new update has brought back old issues!
    Frankly, I really do not have time with computer issues, on top of Maya being characteristically moody already every now and then, as I have to be done with a pretty big project only within few days!
    Please PLEASE, Apple crew, fix this issue asap!
    I really need those things working properly quick!
    Thanks in advance!

  • Bluetooth and operational issues..?

    Hi there guys. Just got my new Iphone 3G. Just a few questions:
    1)How do I send/receive pics, mp3`s etc to/from another phone like my HTC Tytn2 from the IPhone via bluetooth???
    2)Does one get like a "file manager" application that I can use to get content on the IPhone (anything other and simpler than Itunes)
    3)How do I import alternate notifications(MP3/4) for received SMS`s etc? I managed to download additional ringtones, but these are not available in the menu for SMS notifications...??
    4) I have converted and loaded several music video clips on the phone - how do I create a playlist so that I can play all the clips continuously???
    5) Can the phone take video clips???
    These are but a few questions I can think of now - will post more as the need arises. Thanks

    Thanks for the reply - I suppose I will have to use the phone for what it is...a glorified Ipod! I thought it would at least have the basic bluetooth functions of 99.999% of cellphones on the market, even ones costing a 10th of the Iphone price can do this. I would dare to say that it is a bit of "false advertising" on Apple`s side - bluetooth can only talk to headsets, but not transfer images/files etc????!!! - ***?? *This Iphone can never compare/hold a candle to my HTC Tytn2....*

  • QuickTime and DVD issues

    Hey I'm running WXP on my PC, the problem is that I have the new QuickTime 7 and I purchased the Pro key but I can't watch DVD movies on it. So how I am supose to copy my vidios into my ipod if I can't get the program to open them.

    QT cannot by itself read DVD files, which are usually in mpeg-2 format. Apple sells an mpeg2playback component but it does have a number of restrictions, which are listed in this FAQ. The most limiting are that it will not play encrypted commercial movie DVDs and will not play the sound if it was encoded using AC3 format sound. It also will not export the sound even from those mpeg-2 files for which it will play sound.
    http://www.apple.com/quicktime/mpeg2/faq.html
    This Windows freeware will create iPod movies from avi and mpeg--1 files but I don;t know if it will work with mpeg-2 movies.
    http://www.videora.com/en-us/Converter/iPod/

  • Exporting and DVD issues

    Hello,
    I have been trying for over a week to find a decent way to export my 54 minute film without a loss of quality without success! I have tried exporting as a quicktime document, exporting through compressor, sharing, exporting as an avi file: no go: I always get a crappy quality! I tried burning a DVD directly throught the "share" option but also got a lousy result. DVDs that are as high quality as the original films exist!!!! How can I do this with FCP 7.0.3 ???????? I would like to send my film to destivals and people are wanting to project it in public debates, including in theaters. So I really need a high quality export/DVD. HELP!!!!!!!

    Big studio DVDs look that good because they:
    1. utilize dedicated hardware to do the conversion to mpeg2
    and
    2. have a staff of wizards running the system that understand the dark magic necessary to do good compression.
    Converting from HD to the standard definition size that is DVD is always going to look worse than the original (on the assumption that the HD was well exposed, sharply focused, etc).
    If you start with HDV, the problems become worse.
    Try this:
    If you have not editied in a ProRes codec based timeline, do so.
    Export the ProRes based file from FCP using "current settings". This will export a file at the full HD frame size and frame rate.
    Open up Compressor and convert the HD ProRes version to a standard definition ProRes version with FRAME CONTROLS set to BEST.
    Once you have the SD ProRes version, use Compressor again to create the m2v and ac3 files necessary to build and burn a DVD.
    With a less than an hour project, I'd try encoding with a constant bit rate set at 7 and see how things work.
    x

  • Superdrive suddenly stopped recognizing DVDs and DVD-Rs

    Okay, I just spend 2 whole days trying to find any situation like this. Trouble shooting and experimenting.
    Whilst burning a CD with Toast the process suddenly stopped during verification and an error was given. The CD spit out. It was just some music and I had work to do, so.. I went on to burning some data onto a DVD-R.
    The Disk went in. Spun. Made a noise like the when a reader is trying to figure out what the media is. A Grrrrr. It spins some more. A long pause of about a minute.
    Then the disk is spit out. No error. The disk is never recognized. Toast asks for blank media again. Keep in mind, just before this I was burning DVD-Rs. Same Media. Same process. Just stopped to burn the music CD.
    So, I figure its bad media. I get about 1 or 2 on a spindle of disks. Usually at the bottom or the first disk. So, I put another disk in and try again.
    Same thing. So, I try from Finder. Disk is never recognized. It is spit out the same way. (Thought that maybe something on Toast was corrupt)
    Pretty freaked out, I put a burned DVD-R in. Nothing. Then a comercially pressed DVD. Spit out as well. (It was Elf. Which I would have spit out too) I then put a pressed CD in. (Madonna) It is recognized and iTunes starts up. The CD even plays.
    I try to burn a CD-R. The process starts and when it is buring the Write out at the end it stops and gives me:
    The drive reported an error:
    Sense Key = BLANK CHECK
    Sense Code = 0x00
    NO ADDITIONAL SENSE INFORMATION
    Then the disk is spit out after I hit Okay. Eeep.
    Someone gives me a Maxell lense cleaner disk. Nothing to lose. I played it. Because it is a CD format. The drive recognizes it and I am able to run the clean process.
    Then I got the same results. One attempt I get another error:
    The drive reported an error:
    Sense Key = HARDWARE ERROR
    Sense Code = 0x44, 0x8E
    INTERNAL TARGET FAILURE
    Now all this is strange because... this is a 9 month old G5 dual with the superdrive that Apple put in it. Pioneer DVR-109 dual layer DVD-RW. There have been no unusual behavior leading up to this failure. The drive is not over used. I have not changed media.
    I tested the drive with DVD-Rs from other spindles. And different brands. Including some old 1X DVD-Rs that I had forgotten in my hutch. (still sealed in there crystal cases) Same results.
    So...has anyone ever experienced this with the 109? or even other drives. I can't believe it is a hardware issue because there hasn't been any previous signs of impending failure. (I have seen the deaths of several drives over the years) I am convinced that it is some obscure control files somewhere.
    I ran Tech Tool Pro 4.1.1 on it and did a surface scan of a CD. The only way I could get it to recognize the drive. It reported the drive as unwritable, even though it identified it correctly. (as did System Profiler)
    Sorry for the long explaination. But, I don't want to waste anyones time with avenues I have already explored.
    Thanks to anyone who has some light to shed on this.
    Gord
    G5 Dual 2.3Ghz Power PC 3GB RAM, 2x120HDD, Superdrive DVD-RW dual layer   Mac OS X (10.4.6)  

    Thanks Drew,
    I have avoided the external drive option because I thought that they would be slower, or less reliable. However, we have been using those Maxtor Firewire external HDD around here and they are great. So, maybe an external DVD-R might be a good solution now.
    (They used to be fairly poor options a few years ago.)
    We have an Apple Store 2 blocks from my office here in San Francisco. Shiny new and it looks like a Titanium Cube. My experiences with the Genius Bar and before that Applecare have been the feeling that they spend a good deal of time trying to see how this could be my fault and not their responsibility.
    Also, because I am a bit of a geek, by the time I resort to getting help from them, I have exhausted the usual "in the book" solutions. Usually, they are ill prepared for something unusual, that isn't caused by not having the power plugged in, etc.
    I do customer service here for the more technical issues our customers have with Video on Demand and DVD issues. People can be really hostile when they call. So, I go out of my way to be pleasant and upbeat when I am dealing with my problems. Apple Care/Genius Bar people aren't rude or anything. I just get the feeling that they are pressured to not spend too much money making customers satisfied with their hardware. (a matter of policy is my bet)
    I use my Macs because their software is unparalled in its ease of use and professional application. When I have to deal with duplication houses and their techs. I often hear a sign of relief when I tell them that I am using DVD Studio Pro to author my masters. Because this means that the DVD-Rs I send them are correct and compliant in everyway.
    Apple software rocks. I am encouraged by their move to Intel chips recently for their hardware.
    Thanks again Drew. I am working on the permissions today and if it looks like a hardware issue, I am off to look at an external. Great suggestion.
    Gord
    G5 Dual 2.3Ghz Power PC 3GB RAM, 2x120HDD, & 15" Powerbook   Mac OS X (10.4.6)  

  • Bluetooth and Finger sensor problem

    I am using Windows Vista HP PAVILION DV5 1104TU FZ 730PA ENTERTAINMENT PC. I am not able to connect automatically my cellphone Samsung with PC via bluetooth. Every time i have to select a file and send it through bluetooth file transfer wizard manually. Second query is about that the biometric finger print sensor is not working. In fact device manager doesn't show the driver..Kindly help

    Hello Khushii,
    Welcome to the HP Forums!
    I understand you are experiencing Bluetooth and FIngerprint issues on your Windows Vista computer. I will do my best to troubleshoot the issue with you!
    To fix the Bluetooth issue, you need to follow the steps in this document: Fixing Bluetooth Problems
    As well, check to see if the Samsung can work properly with a different Bluetooth device.
    In regards to the Fingerprint issue, I believe installing the driver is a good place to start. Here is the driver that needs to be downloaded and installed: Validity Fingerprint Sensor Driver
    If for some reason the issue is still not resolved, you can find some other suggestions in this document: Troubleshooting a Fingerprint Reader (Windows 7, Vista, XP)
    Please let me know your results. Thanks and have a great day!
    Mario
    I worked on behalf of HP.

  • Qosmio G30: I can not find Linux drivers for Bluetooth and TV Tuner

    I have the Qosmio Q30 HD-DVD(PQG32) running on Ubuntu Linux. My Problem is I can not find drivers for Bluetooth and TV Tuner.
    Does Toshiba support Linux? If yes when I find it?

    TV tunner, forget it there is'nt a Linix driver for it yet.
    Bluetooth NO PROBLEM
    First turn on your wireless card.
    2nd runn the command toshutils -b I think
    toshutils is a support program for toshiba laptops.
    you also need to have the bluetooth drivers loaded on your machine.
    If everything is working correctly a little B bluetooth logo will appear on the top toolbar

  • IDE Harddisk and DVD ROM cannot detected by BIOS in K7N2 Delta Series

    Does anyone can help...
    I have problem with my system, From now on i cannot use my computer because it cannot started the windows. When i checked to the bios there is no detected Harddisk in IDE 0 ( i have 2 harddisk installed), only 1 detected in IDE 1 - only CDRW drive ( for CDRW drive and DVD ROM drive). I checked the power cable to the both Disk drive and Optical drive there is no problem. If i change the master and slave pin the problem stil happen.
    I don't know what to do  Please help me.
    my system :
    MSI K7N2 Delta Series
    AMD Athlon XP 1800+
    Windows XP Pro SP2

    Quote from: ici on 08-February-06, 01:06:02
    When problems occur go back to basics.  You stated D: is unreadable but C: partition is readable (if I understood right).
    As sharp said use only one stick of ram.  Remove any additional PCI cards installed other than Video.  Do not plug in anything but the hard drive set to master.
    Check to see if system will detect.
    If at this point it properly detects your drive, check for a boot to windows.  If it boots then remove the hard drive and try just the CD-ROM for detection purposes.  If this detects try them together again, if they fail to detect you most likely have a power supply issue.  And yes, PSU issues can crop up very suddenly.
    If this fails take the Hard Drive to a friend and have them test it along with the CD-RW/ROM drives.  If they work there and your issue still persists when you have eliminated all other possible points of failure you probably have a bad motherboard.
    Sorry i forgot to tell that the harddisk that the D: cannot unreadable is i check it on other system as a slave.
    Okay i will try your suggestion.
    Thanks for your comment 

  • Stereo Bluetooth - no support for controls and other issues

    I have tried 2 stereo headsets now and both have the same issue. No controls other than Vol +/- are supported. Pause/Play doesn't work and >| and |< don't work. It's pretty clear that the 3.0 software doesn't support these functions.
    One Headset is the new Sony BT100CX. The other is Insignia.
    Are others getting the same results?
    I also get some bizarre results with the Stereo Headset, like no audio in one direction on a phone call. Then when I switched to iPhone from Bluetooth and hung up, the call actually stayed open! Another time I connected to the Sony BT and got constant static.
    I spent a long time talking to a nice but not very knowledgeable gentleman at Apple Support who consulted an "specialist." The specialist did not seem to know whether these controls are supported or not. It is bizarre that Apple is paying so little attention to bluetooth. Having waited years for decent bluetooth support, you would would think they would want to get it right when they finally put it in, but they leave out VERY valuable features. And they don't even seem to know that they left out these features. A simple pause in the iPhone in Ipod mode is a PITA. With the Bluetooth stereo profile it should be easy.

    Thanks. That page says the 3G supports the AVRCP profile, http://en.wikipedia.org/wiki/Bluetoothprofile#Audio.2FVideo_Remote_Control_Profile.28AVRCP.29. Version 1.0 of the profile includes pause/play etc. It is clear that although they claim support, it does not work.
    Are others not having this issue?

  • HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

    I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Bluetooth and direct call from Outlook 2010 issue

    Hello.
    I connect Nokia 5300 via Bluetooth and can call from Nokia Communication Center. But when i try to call from Outlook, phone begins dialing and immediately shows strange icon "D" and break dialing.
    If i connect via USB - all work without any problems - form Nokia Communication Center and from Outlook also.
    In OS Nokia is shown as Standard Modem via Bluetooth (Microsoft)
    PC Suite 7.1.6
    Windows 7 x64 Ultimate RUS SP1
    Outlook 2010 x64

    Workstations are on a domain
    Also it may appear to be more of a issue with 2000 .pub type of files.  As users can create a 2010 .pub file and it works great fine.  But every time a user opens a 2000 .pub file via outlook and tries to edit and save it requests the
    user to do a save as, vs. save to outlook temp location.

Maybe you are looking for