Bluetooth and headphones in IPAD

I am using I-PAD ist generation.
How can I setup my I-PAD to use a bluetooth headset device and listen to headset directly to the headset input?
I connect my headsets alone and it works fine.
I connect my bluetooth device for my headsets and it works fine alone.
When I have them bluetooth headsets enabled, the headsets plugged into the I-PAD is disabled and I cannot hear anything come out of the direct connected headsets.
Is this a limitation?  If not, what setting am I missing?
Thanks,
J

I picked up a pair of Jabra Halo Bluetooth headphones and they rock. When I first got them, some of the features did not work correctly, however with the newest iOS 4.2 update for the iPad, every feature is now supported. You can control volume, pause/play, skip and rewind audio tracks. Many folks complained that the lowest volume available on the headphones was not low enough, well now with Airplay available on iPad, you can control the volume from the iPad itself, which is nice. Basically anything that was wrong with the phones before has been fixed by Apple's iPad software update. They run about $100 a pair but they're totally worth it. Hope that helps.

Similar Messages

  • Right side sound only works over Bluetooth and headphones

    Yonly the right speaker works over Bluetooth and headphones. How do I get my left speaker back?

    Turn off Mono audio.
    Settngs > General > Accessibility > Mono Audio > Off

  • While listening to music in my car, I don't have the option to choose between bluetooth and headphones anymore. Why?

    On IOS 6 and earlyer, I use to be able to choose between the bluetooth or the headphone jack. Now, I can only play music true my bluetooth and I can't pause the music. Anybody has a solution?

    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • IPhone 4 bluetooth and headphones won't work.

    When I connect to bluetooth or headphone jack. The music/sound plays through my iPhone speakers. I've tried with Bluetooth headsets and speakers. Also with an aux cord and headphones. It just started recently with the latest iOS 7.1.2 update. I will be downgrading my software to see if that works. Couldn't figure out what what going wrong.

    Figured out that, with the update, the new pull up menu has a place to change where the sound plays through. It loaded it as default to the phone. All I had to do was change it. Whoops.

  • IOS 8, Bluetooth and Headphones

    After updating my iPhone 6 and iPod Touch to iOs 8.0.2 The devices are unable to find my Jaybirds headphone. Is there any way to fix this?

    similar problem- since upgrading to iPhone 6 I can't connect with my JBL Charge speaker- the phone searches but can't seem to find it. I was able to pair the phone with my car. I've tried resetting the network setting, turning off and on the bluetooth button. Any other suggestions?

  • Bluetooth and headphones

    Can I use my Bluetooth headset and my headphones at the same time for two ppl to listen?

    Figured out that, with the update, the new pull up menu has a place to change where the sound plays through. It loaded it as default to the phone. All I had to do was change it. Whoops.

  • Stereo Bluetooth and headphone jack at the same time?

    I'm looking forward to the A2DP support in the firmware 3.0 update. I plan to get a motorokr s7hd. I'd like to be able to output audio from my iPhone 3G to my car via the headphone jack. Can I also connect a stereo Bluetooth headset and just use that in the event of a phone call? Will it mute/pause the music when a call happens?

    You can set the iPod app to output audio to your choice of a BT headset, or the jack output (not simultaneously). A BT headset can still get call audio if paired, but working in one channel only - no stereo.

  • Recommend over-ear Bluetooth headphones for iPad

    I searched the forum and found several threads regarding BT headphone recommendations. Specifically, I am looking for over-ear type headphones as I find earbuds uncomfortable. I'd also like to stay under $100 if possible. So far I have found two sets that look like they might suit my needs & budget--the Motorola MOTOROKR S305 and the Rocketfish RF-MAB2.
    Does anyone have any experience (good or bad) with these particular headphones? Or do you have any other suggestions? The Sennheiser MM100 looks nice too but it's $150. Thanks!

    Glorfindeal wrote:
    I love my bose over the ear headphones. Here is an amazon marketplace link for them:
    http://www.amazon.com/gp/offer-listing/B000HWRBG2/ref=dpolpused?ie=UTF8&qid=1274191535&sr=8-2&condition=used
    Glor
    The Bose aren't Bluetooth as the OP was asking about.
    Personally, I got a set of the Jaybird sportsband bluetooth stereo headphones. I read just about everything I could find on BT headsets and settled on these. They work great and come in less than a $100 bucks. The sound is great for the price and you don't have any dangling cords. Paired right up with my iPad no problems.

  • Can i enable BlueTooth and keep my headphone output?

    well, the header says it all...
    Bouke

    No, the header really doesn't say it all. Enabling Bluetooth doesn't do anything except turn on the Bluetooth transceiver in the iPad. You could leave it on all the time if you wanted. You might see a slight increase in battery use but nothing else. You could still plug wired headphones in and use them. So, i'm guessing your question is more about pairing and connecting something to the iPad. One od the few things you can pair and connect to an iPad by Bluetooth is a keyboard. And yes, you can pair and connect a Bluetooth keyboard to an iPad and still use wired headphones.
    Best of luck.

  • How to prolong the bluetooth timeout session on ipad and iphone

    how to prolong the bluetooth timeout session on ipad and iphone?
    I understannd that the standard timeout setting is 3 mins. what if I want to prolong the connection duration, how should I do?
    thanks

    To my knowledge, there is no "time out" on a device.  A mouse, KB, etc will go into a low power mode after a short period of non-use.
    Barry

  • Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hi Tomiwa,
    You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
    There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
    That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

  • Is there an easy way to switch iPhone microphone input from headphones to Bluetooth and back?

    When driving I plug my iPhone into the car stereo AUX jack with a cable to listen to music. To receive or make phone calls, or to use Siri, I use a Bluetooth (Jawbone) headset.
    If I'm playing music out the headphone jack and then answer a call, when the call ends the music starts playing again through the Bluetooth headset, so I have to switch it back to headphones. Theoretically no big deal, since there's the little airplay icon at bottom right in most music apps. Still, I really wish it would revert to playing through the headphone jacks and I didn't have to do anything. Is that possible?
    But it gets more annoying. Let's say I decide to use Siri and want to use the bluetooth. This is fine IF I plugged the headphones in before connecting Bluetooth, but for some reason it often seems to happen that it defaults to the headphone jack, especially if I've been messing with it a bit -- say I was listening to music, then received a call, then hung up, so now music plays through Bluetooth, so I hit the icon to switch music back to headphones, though sometimes this doesn't work and I have to unplug and replug in the headphones. But now usually if I want to use Siri, and I hold down the iPhone home button, or even if I hold down the jawbone button, it will often take input still from headphones.
    I can't go into all the variations of this that happen, but almost every car ride there's a pain about this -- someone calls but even though I answer through my headset, the input is still from the headphone jack, and i have to scramble to get the call going through Bluetooth again. Or I have to unplug then replug the headphones after Siri use. None of this even covers something other, like dictating text or making a voice memo, something else that need simply but DOESN'T have an AirPlay-style button on bottom right like the music apps do. Really a pain.
    Really wish there were some easy switch to toggle the input.
    And again, really wish the music would just go back to playing where to was playing from (headphones) instead of making me switch it either via a button or through unplugging/replugging headphones.
    Any solution to this?
    Thanks.

    Sometimes you turn off your Bluetooth and then back on and it doesn't reconnect with your phone unless you go into the menu. Either way doesn't help much if someone calls you while you're driving and you realize your iPhone is stuck on headphone input.

  • Expert help needed to connect iPhone / iPad using BlueTooth and Wi-Fi

    We need expert help to connect iPhone / iPad using BlueTooth and Wi-Fi. If you have worked with Apple MFi Program [http://developer.apple.com/programs/mfi], or have expertise/experience in this, please contact me. Thanks! Kevin.

    Hi there.
    I connected to my livebox after about three attempts. You have to pair the livebox by pressing either the number one or two that is on the box. When it is in pair mode it stays that way for ten minutes so it gives you chance to try your wep code that is on the bottom of the box a few times. I can't remember which one was successful but i did try the letters in uppercase and lower and one of them seemed to connect.
    Welcome to discussions by the way.
    Hope this helps JB

  • Help! my iPod touch bluetooth cannot discover my iPad nor mac air, but it can discover other devices... I don't understand why.  My Mac and my iPad can't discover it, as well... :(

    My iPod touch bluetooth cannot discover my iPad nor mac air, but it can discover other devices... I don't understand why.  My Mac and my iPad can't discover it, as well...

    Thanks for this... I actually wanted to pair my iPad with my iPod touch so I can use the keynote remote app in my iPod touch to control my keynote presentations... I was able to control my presentations through wifi... I wanted to use the bluetooth since internet connection is quite slow.. The app tells me I can connect through bluetooth with my iPad but sadly, it can't... I've been trying to pair them but the can't discover each other... :(

  • I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

    I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

    Check this out....
    http://support.apple.com/kb/HT1664

Maybe you are looking for

  • Inaccurate Shipping and Handling Charge for New FIOS Quantum Gateway Router

    I ordered the new Quantum Gateway Router under the special promotion (reduced price of $99.99. The website specifically said in the ad that "your new router will have a shipping and handling charge of $5.99". When I placed the order the shipping and

  • What is the best way to delete dynamically-generated symbols from another symbol?

    in the onClick handler for 1 symbol, I have: var sandwhichQty1 = sym.createChildSymbol("sandQty1", "Stage"); another symbol inside sandQty1 has the onClick method: this.deleteSymbol(); which works fine, deleting sandQty1. I'd like to delete it, and o

  • Does Portg R700-17W lsupport extended desktop across 3 screens?

    Hi, I've a Portg R700-17W laptop with a replicator port. I'd like to have an extended desktop in Windows 7, with one external monitor on the VGA port, one on the HDMI, and the laptop screen. Is this possible? If so, what resolutions can it support? M

  • How can I know which screen-group is?

    Hi experts!! I don't know how can I know which screen-group is associaciate to the values...for example, how can I associate  this block to a screen-group for after do this?  IF SCREEN-GROUP1 EQ 'DAT'. SELECTION-SCREEN BEGIN OF BLOCK B9 WITH FRAME TI

  • Don't want to test the hardware

    I am trying to build a Snow Leopard image that will boot all current Macs. Apple made this much more difficult by recently releasing updates specific to only the new iMac and Mac Mini. I thought I could just build two new images with those specific u