BlueTooth [BT] failed during use. Various links say "BT Not Available" - "No BT Hardware Found" etc. Have 3 yr. MacBook Pro Notebook with OSX 10.6.8 with built-in Bluetooth. HELP !

Bluetooth [BT] failed during use.Menu bar icon remains as does two BT icons in Utilities folder. System Prefs. BT icon totally gone. Remaining icons say "No BT Hardware Found" - " BT Not Available" etc. Have 3 yr. old MacBook Pro Notebook with OSX 10.6.8 & built-in Bluetooth. [ Close by iPad's BT remains functional. ]

Yeah the Bluetooth hardware has failed and needs to be replaced. there is nothing you can do except replace the BT chip. Take it to Apple.

Similar Messages

Can I use adapter of the iphone (not the cable), to attach the power cable of a macbook pro bought in Canada? The power adpter for the macbook pro is two pins because it was bought in Canada. Thank you.

Hi! I will get a macbook pro bought in Canada soon. Can I use the adapter plug of my iphone (ireland) not the cable, as the adapter to plug my macbook? The power adpter of the macbook from Canada is a two pin. Thanks for any help.

I wouldn't, the Mac draws significantly more power than the iPhone. Why risk it.

My brand new MacBook Air causes unpleasant tingling in my dominant hand during use, even when it is not connected to power. Anyone else have this problem? Any successful solutions?

I'm fairly certain this isn't a carpal tunnel issue, and I've never had the problem in the past with my iPhone... I can't imagine switching to a laptop other than a mac but this is nearly unbearable!

You can return a new Mac within 14 days of purchase.
Return it and get another one.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273

My macbook pro has lost the internet connectivity. My friends laptops all appear to be working using the same ethernet connection. It all has been started just after I have updated mz Macbook pro to latest OSx update. Please help

please help..I am suffering since last few days and now posting from my friends laptop bz using the same eathernet cable.

Run the Network Diagnostics assistant. How far do you get?

My camera often gets stuck or says "camera not available" what's the problem? What should I do?

My camera is not working properly. It often gets stuck or says " camera not available" and if I take video via manual mode it gets stuck with a photo but the video is being taken. What's the problem?
Solved!
Go to Solution.

Hi soubham and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Did you try the advice offered by SergioPL above?
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

First of all, I would have to say that getting in touch with you is a nightmare and I am not at all happy that I can't just email or live chat with someone who can help! I am not a technical person, I just want to be able to use Photoshop Elements and ge

First of all, I would have to say that getting in touch with you is a nightmare and I am not at all happy that I can't just email or live chat with someone who can help! I am not a technical person, I just want to be able to use Photoshop Elements and get on with it. I bought Photoshop Elements via Amazon some months ago and it worked fine. I then got a message that advised that the trial version would expire, which it subsequently has (I have been trawling your site for weeks and weeks trying to find an email or phone contact to get some assistance). Relucltantly, I am now typing this - and I suspect it will not help in the slightest! I bought the FULL not TRIAL edition of Photoshop Elements and I have contacted Amazon who confirmed this, but say I need to contact you. Can you please let me know how I can resolve this? Louise A Fraser

Hi Louise, sorry to hear of your problems. This is not Adobe. We are mainly support volunteers, other users like you, trying to help one another. You need to contact Adobe directly for activation and licencing issues. Click the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on. Don’t let them pass the buck. Stay connected and ask to speak with a supervisor if necessary.
Click here to get help now Contact Customer Care

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less complicated than the Premier Pro that I use. The program works perfectly, except for one thing.... when adding a title to the short video sequence we are working with, if I use a particular font (Metallophile Sp8) which I obtained from my Adobe Typekit, it crashes the program,.... all other fonts work perfectly....can anybody help me please?

clivephoto
What computer operating system is your Premiere Elements 13 running on? And what video card/graphics card does this computer use?
From your description, can I assume that this Mettallophile Sp8 font is being recognized by Premiere Elements 13 to the extent
that it can be seen and remains seen in Titler's list of font choices - even after the crashes?
If you opened a new project, imported nothing, and created a text title in the Titler with this Mettallophile Sp8 font, does the program crash?
Please review the following which discuss fonts and Premiere Elements and determine if anything in it helps.
Fonts & Crashes with Titler
Let us start here and then decide what next.
ATR

HT1338 After migration from MacBook 13' running OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 using Migration assistant, the Bluetooth assistant mentions "name not available" and it cannot detect my Magic trackpad. There is no mention of any mishap.

I just migrated from MacBook 13' OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 with the use of Migration Assistant. When attempting to install my Magic Trackpad, the Bluetooth Assistant mentions "name not available" so that the device cannot be detected. In have disconnected the firewall.Thanks for assistance.

Create a new, temporary admin account and see if you can set it up in that account.

My iphone4 says its cinnected to 3g but when i use safari it says "could not activate mobile data network". Any ideas please?

my iphone4 says its cinnected to 3g but when i use safari it says "could not activate mobile data network". Any ideas please?

Further, if you are not in your home cellular carrier's area, you need to set Settings > General > Cellular > Data Roaming = "On".

"Lost" ICMP6 neighbor solicitation using global link or ULA, not with local link

Hello,
Sorry for my bad english.
I have a strange issue with IPV6 and Airport.
No issue with Ethenet link (native ethernet link with MacBook Pro 2007 under 10.8.3, USB ethernet link with MacBook Air 2011 under 10.8.3).
No issue with Windows 8 via Boot Camp on Mac Book Pro 2007.
Facts :
ICMP6 Router sollication gets ICMP6 Router Advertissment.
MacBook Pro and MacBook Air under 10.8.3 gets ipv6 config.
Example for my MacBook Air :
en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        ether 04:0c:ce:da:b9:32
        inet6 fe80::60c:ceff:feda:b932%en0 prefixlen 64 scopeid 0x4
        inet6 2001:470:cd49:fee1:60c:ceff:feda:b932 prefixlen 64 autoconf
        inet6 2001:470:cd49:fee1:d9b3:40b6:bc67:c01b prefixlen 64 autoconf temporary
        inet6 fd00:fee1:fee1::60c:ceff:feda:b932 prefixlen 64 autoconf
        inet6 fd00:fee1:fee1::b8f6:3ec1:a7a6:f64f prefixlen 64 autoconf temporary
        inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255
        media: autoselect
        status: active
My MacBook Air gets 2 Global Link and 2 ULA from ICMP Router Advertissment from my router (DLink DIR-655 B1).
Local Link, Global Link and first ULA adress are acquired via EUI-64.
Others adress are random temporary address.
Connections (tcp6, udp6, icmp6) are ok from Local Link.
Examples :
Ping from MacBook Air Mac Mac OS X 10.8.3 to MacBook Pro Windows 8 via Bootcamp :
bash-3.2$ ping6 -c 1 fe80::811c:6008:f31c:2e06%en0
PING6(56=40+8+8 bytes) fe80::60c:ceff:feda:b932%en0 --> fe80::811c:6008:f31c:2e06%en0
16 bytes from fe80::811c:6008:f31c:2e06%en0, icmp_seq=0 hlim=64 time=11.112 ms
This fact is true (Local Link Ok) for all combinaison (Mac OS X 10.8.3 to Mac OS X 10.8.3, Mac OS X 10.8.3 to WIndows 8, Windows 8 to Mac OS X 10.8.3).
Issue :
Connections (tcp6, udp6, icmp6) are note possible if "destination" is under my lived running Mac OS X 10.8.3.
The destination element is essential.
I can ping from Mac OS X 10.8.3 to Windows 8.
It's why my neighbor is coherent (global, ULA, local are resolved).
bash-3.2$ ndp -a -n
Neighbor                        Linklayer Address Netif Expire    St Flgs Prbs
::1                             (incomplete)         lo0 permanent R
2001:470:cd49:fee1:60c:ceff:feda:b932 4:c:ce:da:b9:32 en0 permanent R
2001:470:cd49:fee1:6438:7211:58ce:b389 0:1e:52:71:61:9d en0 23h53m57s S
2001:470:cd49:fee1:811c:6008:f31c:2e06 0:1e:52:71:61:9d en0 23h54m12s S
2001:470:cd49:fee1:d9b3:40b6:bc67:c01b 4:c:ce:da:b9:32 en0 permanent R
fd00:fee1:fee1::60c:ceff:feda:b932 4:c:ce:da:b9:32   en0 permanent R
fd00:fee1:fee1::b8f6:3ec1:a7a6:f64f 4:c:ce:da:b9:32 en0 permanent R
fde4:416c:c381:3388:f496:c836:ac6:dcda (incomplete) utun0 permanent R
fe80::1%lo0                     (incomplete)         lo0 permanent R
fe80::1%en0                     (incomplete)         en0 expired   N
fe80::60c:ceff:feda:b932%en0    4:c:ce:da:b9:32      en0 permanent R
fe80::3608:4ff:fee1:8ada%en0    34:8:4:e1:8a:da      en0 23h59m24s S R
fe80::811c:6008:f31c:2e06%en0   0:1e:52:71:61:9d     en0 23h56m35s S
fe80::f496:c836:ac6:dcda%utun0 (incomplete)       utun0 permanent R
But :
I can't ping from Mac OS X 10.8.3 to Mac OS X 10.8.3 if I use Global Link adress or ULA adress.
I can't ping from Windows 8 to Mac OS X 10.8.3 if I use Global Link adress or ULA adress.
Example (from Windows 8, I have rebooted my MacBook Pro, but effets are similars).
C:\Windows\SysWOW64>ping -n 1 2001:470:cd49:fee1:60c:ceff:feda:b932
Envoi d'une requ?te 'Ping' 2001:470:cd49:fee1:60c:ceff:feda:b932 avec 32 octets
de donn?es?:
Impossible de joindre l'h?te de destination.
Statistiques Ping pour 2001:470:cd49:fee1:60c:ceff:feda:b932:
    Paquets?: envoy?s = 1, re?us = 0, perdus = 1 (perte 100%),
Interface 12 : Wi-Fi
Adresse Internet                              Adresse physique   Type
2001:470:cd49:fee1::                          00-00-00-00-00-00 Inaccessible
2001:470:cd49:fee1:60c:ceff:feda:b932         Inaccessible       Inaccessible
fe80::60c:ceff:feda:b932                      04-0c-ce-da-b9-32 Caduque
fe80::3608:4ff:fee1:8ada                      34-08-04-e1-8a-da Caduque (Routeu
r)
ff02::1                                       33-33-00-00-00-01 Permanent
ff02::2                                       33-33-00-00-00-02 Permanent
ff02::c                                       33-33-00-00-00-0c Permanent
ff02::16                                      33-33-00-00-00-16 Permanent
ff02::fb                                      33-33-00-00-00-fb Permanent
ff02::1:3                                     33-33-00-01-00-03 Permanent
ff02::1:ff1c:2e06                             33-33-ff-1c-2e-06 Permanent
ff02::1:ffce:b389                             33-33-ff-ce-b3-89 Permanent
ff02::1:ffda:b932                             33-33-ff-da-b9-32 Permanent
ff02::1:ffe1:8ada                             33-33-ff-e1-8a-da Permanent
Using WireShark, I noticed :
- Destination under my 2 Lived Mac OS X 10.8.3 doesn't received ICMP6 neighbor solicitation if adress are Global Link or ULA.
But ICMP6 neighbor sollicitation are emitted.
No issue with Local Link address.
Using WireShark's monitor mode, I noticed :
- 802.11 frame are received on multicast group associated with asked IP neighbor solicitation for any kind of address.
It seems that ICMP6 neighbor solicitation are lost between 802.11 frames and IPV6 / ICMP6 stack.
IPV6 firewall is not configured to drop packets.
bash-3.2$ sudo ip6fw show
Password:
65535          0          0 allow ipv6 from any to any
VMWARE Fusion is installed on my Lived MacBook Air 10.8.3 and MacBook Pro 10.8.3.
But tests are made with associated modules not loaded :
bash-3.2$ sudo kextstat |grep -v com.apple
Index Refs Address            Size       Wired      Name (Version) <Linked Against>
Like I said in post beginngin, issue doesn't occurs with ethernet link, only Airport link.
Some one can help me for this strange issue ?
Thanks for your help !
Philippe

Hello,
Thank you for your reply. It would make sense for me if R2 would not receive any packet, but it receives a request and then does not send any reply to NS sent from R1 as I showed in the example. Path to R2 which is a gateway is seen as directly connected on R1:
R1#sh ipv6 ro
IPv6 Routing Table - 5 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
C 2001:1::/64 [0/0]
via ::, FastEthernet0/0
L 2001:1::2/128 [0/0]
via ::, FastEthernet0/0
S 2001:2::/64 [1/0]
via ::, FastEthernet0/0
L FE80::/10 [0/0]
via ::, Null0
L FF00::/8 [0/0]
via ::, Null0
I'm wondering why R2 cannot respond when its own interface has an address that I want to ping (2001:2::1)

I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

Okay, regarding this problem:
I'm trying to print to an Advent AW10 printer from an Imac running Yosemite 10.10.1 and it's been driving me nuts for the last two months...
I got on to Advent yesterday and recieved this instruction from their support team this morning and it worked and I'm now printing away merrily:
Please follow below steps:
In Spotlight search window type Terminal and then press Enter.
This should bring up the terminal window/program.
In the Terminal type:
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' then press Enter.
It will ask for your password. Please enter system password.(You will not see password entering)
After that type following:
sudo launchctl stop org.cups.cupsd then press Enter.
Try Printing.
I don't think this is specific to Advent and is rather simply an 'opening up' of something blocking the 'printer channels' (layman's terms obviously)
Hope this helps people out!

Bought upgrade on appstore. now it says its not available for download in indian store. how is it possible to buy it using indian currency!!!!????

Bought upgrade on appstore. now it says its not available for download in indian store. how is it possible to buy it using indian currency!!!!????
Any solution

HI,
No SOLUTION FROM HERE, but I have an unresolved issue with similar overtones.
As a new member, having had a birthday gift from a family member in another country, I am dismayed to find out that there is an unresolved business logic issue, which will allow me to own a MacBook Air, but because I live in a different country to the place of purchase there is a big No No. Additionally, my pension provideds me with a credit card from that first origin, but I am forbidden from buying any software elswhere? Apple seem reluctant to discuss this with me, but some solutions have been offered to get me the free downloads?
Does this come under 'unfit for purpose' and/or 'dodgy trading'? Apple unspoken message, buying from abroad. Dont go there!
Any help or views?
(Limbo) Cyfrommayo

I have a mid2009 MacBook Pro for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?

I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?

no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
Peace
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing.

Channel saying programme not available on Vision b...

Hi!
I've been using Vision for past 2months and no issues so far, until around Christmas time. I tried to watch Five USA, one evening and says programme not available. Thinking it was a freeview issue, switched to normal freeview to check and the channel was working perfectly!
Has anyone else's doing the same and are there any fixes?
Thanks, Natalie

Hi NatalieW,
Thanks for posting. I'm sorry for the delay in getting back to you. have you tried re-scanning the channels? Did you manage to resolve the issue? If not drop me an email with your acount details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

BlueTooth [BT] failed during use. Various links say "BT Not Available" - "No BT Hardware Found" etc. Have 3 yr. MacBook Pro Notebook with OSX 10.6.8 with built-in Bluetooth. HELP !

Similar Messages

Maybe you are looking for