Bluetooth conection to car phone

Hi last week i bought a new car and paired the z10 to the phone no problem i then had a update notice on my phone i downloaded the update but my phone will not ring or take call throught the phone how do i get rid of the update as nissan say the car phone is fine its the phone . help

Sometimes unfortunately the auto company people don't know a lot about BlueTooth devices and how to set them up. So, you may need to dig further.
Before you go back to them, check if your Bluetooth is turned on. Swipe down from the top edge of the screen. There is a Bluetooth icon in the top right of the icons which come down. Is it blue or white? If it's white, then it's turned off and you just need to touch that icon to turn Bluetooth on. 
Dig deeper by pressing on the word BlueTooth. Does it show that your car's bluetooth is paired. It should show the name of the car's bluetooth (I don't know if it will appear as your car model but that's determine by your car's system.) If it's grey then it's just not connected. It should however say "Paired" on the right side. If it's not paired or doesn't appear, then you just need to pair it again with the Bluetooth on your car. 
The BlueTooth section of your Z10 manual is at http://docs.blackberry.com/en/smartphone_users/deliverables/47561/mes1334609105805.jsp
You may need your Nissan manual for the vehicle also to setup pairing. 
Twitter: @sheldonbk

Similar Messages

  • I can't connect my iphone 4 via bluetooth with my car phone

    I cant connect my iphone via bluetooth with my car phone. Bluetooth is switched on on the iphone and the car phone says ready for bluetooth telephony yet the phone just keeps on searching without connecting? Any ideas as Apple phone support doesn't start until 9am (not very accommodating for a company whose equipment runs 24/7)

    Car phone?
    You are trying to connect your iphone to another phone?

  • IPhone 5S bluetooth pairing with prius in-car phone Issue

    Let me begin by saying that this is my first problem with any apple device!  EVER!!
    I have an Verizon iPhone 5S, less than 2 months old, with the new OS 8.0.2 update and it will no longer pair correctly with my 2012 Prius V's in-car bluetooth phone.  You try to call someone, it doesn't connect and you can't hang up!!!! Then auto-calls them when you turn the bluetooth on (in the phone)... but doesn't physically make the call on the phone.  Now if the bluetooth in my phone is on, and I even start the car, the car states it's trying to call home.  I have attempted many of the following in different combinations with no success:
    Tried to end the call on the car's interface (it won't turn off), pressed the hang up button on the steering wheel -- nada.
    Restarted Phone
    Turned Car on/off/on
    Removed all pairings and re-paired them together
    Made sure the LTE option was on (the iPhone 6 option, which seems to be relatively successful, for data and voice/voice only/data only is not an option on iPhone 5S)
    Now, my husband has a Droid 4 and it works seamlessly with the bluetooth pairing.  The car does play, through the bluetooth, Audio through the phone.
    I guess I should also state I did NOT have any issues with iOS 8.0 or the 8.0.1 upgrades with pairing with the car's bluetooth technology.  I have checked and my Entune "upgrades" are all up to date. 

    Hello Sorridera,
    The article linked below details a number of steps that can restore your iPhone's ability to correctly connect to your vehicle's Bluetooth system.
    If you can’t use a Bluetooth accessory or car kit
    http://support.apple.com/kb/HT6473
    Cheers,
    Allen

  • I just downloaded the newest IOS software and now my iPhone5 won't pair with the Bluetooth in my car (the car system says it's paired when I try to re-pair it but then when n try to make a call it tells me it doesn't recognize the phone.

    I just downloaded the IOS upgrade, 7.0.2, and now my iPhone 5 won't pair with my Bluetooth in my car, despite repeated attempts to re-pair the two and despite the fact it's been paired fine previously.  The car system tells me it's paired but then when I try to make a call I get another message that says there is no paired phone.

    You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens.

  • HT1766 When I go to settings on my iPhone 5 and hit the "bluetooth" tab, The  circular icon next to "Devices" is constantly "spinning", and now my phone will not connect to the bluetooth in my car, etc. Does anyone know how to fix this?

    when I go to "settings" on my iPhone 5 and hit the "Bluetooth" tab, the circular icon next to "Devices" is constantly spinning, ans now I can't get the phone to sync with the bluetooth in my car, etc.
    Any ideas on how I can correct this?

    unpair your phone from your car, then do a re-pair.

  • I downloaded the new operating system and now the Bluetooth in the car does not play my music.  All the songs show the cloud with a red arrow pointing down. How do I download all of them again to my I phone please?

    I downloaded the new operating system and now the Bluetooth in the car does not play my music.  The music on the phone show the cloud and the red arrow pointing downwards.  How do I download all the music again to my phone please?

    I have an ITunes account.  I got it when I got my IPOD.  I've thought about upgrading, but I didn't see any reason to buy a newer IPOD because they all come with so much stuff I don't want/need.  I don't have my current IPOD filled yet and I really don't need an IPOD Touch that has capabilities that my Droid already has.  I don't need to be concerned with documents, mail, attaching to Facebook or playing games.  I can do all that on my phone.  I just want to maintain my music between 3 devices.
    So now that I see it is not to my benefit to have this product---can you point me in the direction to cancel this?  And how do I get my music back?  Will it show up once I cancel my account?

  • I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

    I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

    I have to ask,
    Are you making sure you are in park before attempting the sync?   The car won't allow you to do it in motion, whether or not you're the passenger.

  • My phone has started playing music when it connects to Bluetooth in my car. How do I stop it?

    With this last update, my iphone5 starts playing music every time it connects via Bluetooth in my car. I close the app but when I hang up from a call, the music starts again.  How do I turn this feature off?

    The iphone starts playing music automatically when it connects to either of the car stereos via bluetooth and I don't want it to as it drains the phone battery. This is particularly annoying on the ford as the car stereo doesn't even support streaming music!
    I don't want to lose the bluetooth connection as I need to make phone calls.
    Does anyone know how to switch off the automatic start for the music without losing the bluetooth connection?

  • I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

    I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

    I haven't tried it yet, but I believe this would disconnect Bluetooth for both the phone and music. I have a 2013 Hyundai Sonata if this will help.

  • Issue with bluetooth conection

    Hi, I've been having problems with the conection of bluetooth in my car stereo. it pairs normally but after some time connected it suddenly disconnects (whenever I receive a phone call mostly) I never had this problem with kitkat. What can I do?

    Hi fernand007,
    Welcome to the community,
    Can you advise what troubleshooting you may have already been through? this will help us determine the best course of action.

  • Bluetooth conection

    i am trying to load my phone book from my phone to LG-sat nav and in car phone it recognises the LG-BT but when i try and load phone book,it says no bluetooth available the phone is 6111

    06-Apr-2008 05:16 PM
    xanthos wrote:
    Hello!
    My system here is Vista Ultimate ( Intel core 2 duo ) and the bluetooth divice is the known Blue Soleil. I've instaled the Nokia Pc Suite for N series and tried many times to conect with the PC but it's imosible. Please cn you help me?
    Thank you very much in advance
    xanthos
    Blue soleil often gives problems.
    Try connecting blue Soleil to phone instead of trying to connect phone to blue soleil. I too use it. Sometimes it plays up. Sometimes you may have to uninstall and reinstall Blue soleil to get connected to phone.
    If my post has helped you please click the white star on the right

  • I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

    I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

    I would also like this issue addressed.
    I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
    I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
    Message was edited by: picardsm

  • Is it possible to use Mac's Bluetooth and emulate a phone ?

    Does anybody know if it is possible to use the Mac and have the Bluetooth interface emulate a phone? Doesn't matter that much which phone model/type.
    Background: I have a Nokia 6021, it has a Bluetooth interface and it pairs properly with the Mac. I can browse the phone and backup all addresses from it. No problem.
    Now I have a new car, the Toyota Prius 2006, which has a Bluetooth connecting and functions as a headset for the phone, No problems either.
    But then the Prius has it's own dictionary of addresses and phone numbers, which it can use via the fast select function, and you can fill them from the phone. No problem, except for one thing: the Nokia is only able to sent one phone number at the time and to do so the coneection has to be broken, re-established, sent it, broken, re-established, and then one number is done. I did the most urgent ones, but for more then 200 numbers in my phone.... Pwoeiwie....
    The problem is that Nokia does one at the time, I checked, no other possibility. A thought came to my mind to connect the Mac, use iSync, etc. But the Prius only accepts a device which identified itself as a phone.
    Anyone knows if this can be done, and if yes wants to tell me? Please do so, thanks in advance for heaving read this!
    Regards,
    Wim.

    Hi Julian,
    I'm not exactly sure how to interpret your question. Let me try:
    1. As a user, you set the car in receive mode. At that point you can sent an address or a bulk of addresses. But the phone only sends one at the time. I checked with Nokia, they confirmed it just cannot do it otherwise.
    2. If you ask for the message format or the technical data structure, it works when I sent the address as a "Business Card" from the phone to the car.
    3. This is not yet relevant because the car yet refuses to connect because the Mac is not seen as a phone....
    Regards,
    Wim.

  • My Droid Razor HD updated yesterday. Now it will no longer connect to the bluetooth in my car

    Yesterday I accepted the update for my Droid Razor HD. Now it will not connect to the Bluetooth in my car (worked for the previous 8 months).

    Christin - Generally your pairings will still be in a list under BT on your phone. Unless of course, you performed a Factory Data Reset on the phone.
    Your car's radio should have a reset capability. The front panel on my SONY comes off, and there's a reset button there. Do you have documentation that came with the car for the radio, or if an aftermarket radio, for the radio itself? If not, there is generally information on the web that you can Google to find the reset procedure.
    HTH.

  • N95 Bluetooth connection with car

    I drive an AUDI A6. Before I got my N95 I had a Sony/Ericsson i800. When I connected this phone with my car (Bluetooth), everything can be done from the car environment such as lookin for phonebook entries, selection of entries, dialing etc.
    With my N95 I can connect with my car and I can use the hands-free speeking system ... but only this! I can't read any phonebook entry, calling list etc.
    Is there any trick to open the phone directory for use in bluetooth mode?
    Best regards and thanks in advance.
    Sunni

    Having just bought a new Audi A6 Le mans 3.0tdi quattro Avant - I was keen to find a solution to this bluetoth/phonebook problem. I too have the Nokia N95 and can confirm that the above link works 100%. Firstly you need to have Nokia PC Suite installed on you PC & phone .. then download the application and save to your pc. With your phone now connected to your pc.. download the saved application to the phone... [ make sure bluetooth is off and not paired to your car ]
    Once installed on your phone - go to your car & connect/pair via bluetooth.... go to applications and run the application. It took a couple of minutes "processing " .... then switches to " transferring " ... again a minute or so.... Job Done.. My phone book is now integrated with the car and the MMI.
    Thanks for the above link. http://europe.nokia.com/A4143881
    It's the 2nd one down.....ie
    Nokia 810 Contact Download Application for Nokia S60 3rd edition devices Download now
    Nokia_810_Contacts_Download_S60_3rd.sis
    103.80 KB | English
    This contact download application enables you to download the contacts from the following Nokia phones to your Nokia 810 Car Phone via Bluetooth technology: Nokia E50, E60, E61, E61i, E62, E70, E90 Communicator, N71, N73, N77, N75, N76, N80, N91, N91 8GB, N92, N93, N95, 3250, 5500 Sport, 5700 XpressMusic, and 6290.Message Edited by audinut on 16-Oct-200703:19 PM

Maybe you are looking for

  • Help!  No Audio output In Logic Express 7

    I have been running logic 7 Express with a MOTU Traveler for over a year now (with very few problems), and just this morning i have encountered a very puzzling problem. When i opened the song i was working on last night, i found that there was no aud

  • Need A Code For CMD_EI_API

    Hi All, I used the class CMD_EI_API and method MAINTAIN_BAPI in my report to create a customer master data (data uploaded from the excelsheet which is  already has the customer number ) ,its not showing any messages and not even updating the table if

  • How to use P=name for Physical path name via t-cd:file

    Hello experts, I want to define physical path name using <P=name> for add-on programs. It is desirable to save files on another drive from SAP installed drive. I don't know which profile parameter can be changed. I'm afraid if standard logic wouldn't

  • J2EE not starting up

    Dear Experts, we have an issue with J2EE startup in solution manager. the java instance is not starting up. please find the logs below, please prvide your suggestions. dev_bootstrap: trc file: "dev_bootstrap", trc level: 1, release: "720" node name  

  • I forgot to answer the security question, please tell me what to do?

    I forgot to answer the security question, please tell me what to do?