Bluetooth connected phone call waits until the person answers to connect through speakers! How to change this.

When placing a bluetooth call the car shows that the phone is connected but there is no ringing (it is still ringing in the phone speaker). Then the person answers and it plays through the car speaker, but misses the first word. What is happening? I used to hear the phone ringing. Now it waits until the person answers.

This occurred when I updated the IOS to 8 and switched to an iphone 6 from a 5.
I read both articles and did not find a solution to my dilemma. To clarify further:
When hooked up through bluetooth to my 2011 Honda Accord
- incoming calls will ring the phone through the speakers and I can answer and speak through the speakers/car microphone by touching a switch on my steering wheel
- outgoing calls that I initiate by touching the phone number on the phone will ring in the phone until the person picks up, it then switches to the car speakers (unfortunately, the hand-off results in missing a word or two that the answering person has said). This did not work this way with my iphone 5 and ios 7.
I hope this is better communicated and there is an answer.
Thanks.

Similar Messages

I recieve SMS and i hear established melody and I do't hear the person on all over SMS. How to solve this problem?

Problem with an incoming message. For example, during my conversation the second line receives a call, I hear the sound in dynamics such as "piiiip piiiip," but when in this situation I recieve SMS and i hear established melody and I do't hear the person on all over SMS. How to solve this problem? Perhaps someone tell me? save in advance

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

TS2755 my I messages come through to other people's phone as my email and not my number do you know how to change this?

when I send a iMessage it goes through as a email does anyone know how to change it to go through as you're number?

Settings>Messages>Send/Receive
Make sure your phone number is checked.

TA38607 how do i deactivate call waiting while i could not find the call waiting in the Phone folder

how do i deactivate call waiting while i could not find the call waiting in the Phone folder

If you have a CDMA phone, there is no way to deactivate Call Waiting from the phone. You'll need to contact your carrier.

Why won't siri on my iphone connect phone calls using ios7?

Why won't siri connect phone calls using ios7?

I have the same issue. So frustrating! I think I found a fix. It's not perfect but it works to get Siri, google maps and phone calls working all at the same time which are the most important things to me. After you start the car, go to settings on uconnect. Scroll down to the bluetooth settings. There are 2 tabs here. 1 for voice and 1 for audio. I'm doing this from memory so someone call it out if I have that wrong. Each will say "connected" in red once your iphone automatically pairs to uconnect. In the audio tab, press on the name of your phone. This will disconnect only the audio portion and leave the voice portion connected. You can now use Siri through your car speakers! Calls will still work too. Google maps will also give directions.
This all works great until you turn off the car at which point the setting will be forgotten and will have to be repeated. It's important to keep in mind that if you now play music or a podcast off your iphone it will emanate from the phone's speaker, not your car speakers. This doesn't impact me as I'll usually be listening to sirius or fm radio when I'm driving anyway. Just like when you receive a call, siri will silence sirius until you're done with siri. Same with google maps.
What this tells me is if Apple or (less likely) Chrysler ever add an option to save your bluetooth device as a voice only and not a voice&audio bluetooth device that uconnect would finally be usable with siri. I guess this means we can be more specific in our requests to apple and chrysler to resolve this issue. Hope this helps!

How to wait until the 1st part of the processing is done

Hi,
I had a hard time to combine two parts of processing in one .vi file, and thus would like to get some advice/help through the forum.
Attached is the partial finished vi file I made. You can see that it is composed of two parts. The upper part is to run a bat file (check_result.bat), which generates a result.txt file. The lower part is to use the result.txt file as an input file, and check if the key word called "test case passed" is included in the result.txt file or not. So I want to run the upper part firstly, and then run the lower part after the upper part is finished.
However, I don't know how to connect the two parts in a right way that the lower part only starts running after the upper part is finished. Any comments/help is highly appreciated.
Thank you in advance.
Xuedong
Attachments:
question.vi ‏49 KB

The magic of dataflow!
All you need is a data dependency between the two parts. Often critical parts of each section contain error terminals, so you can just string em along in the proper order and each part must wait until the previous node has finished.
In your particular case, the read operation has no error input, so you can recruit any other input. Create a fake data dependency by strategically placing a small sequence frame containing common code. The sequence cannot start until all code that provides imputs has finished, serving your purpose.
Of course it seems silly to even try to read the file if the previous node failed. Right? So simply place the second part inside a case and hook it up to the error output. Now the second part (1) waits until the first part has finished AND (2) execute only of the first part succeeded. No sequence needed.
All clear?
Message Edited by altenbach on 02-07-2007 02:34 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
dataflow.gif ‏4 KB
dataflow2.gif ‏4 KB

Remote function module to wait untill the response came from webmethods

hi all.
here i have got a situation that the remote function module created in SAP-R/3 to wait untill the response came from webmethods :
i have created the remote function module by assigning one structure in tables(tab) and 3 parameters in changing tab just to collect the messages return from webmethods
so this rfc will be called by webmethods and pick the structure data and then it wll return 3 variables back to rfc.
here the rfc need to wait untill the response came from webmethods.
so can any body suggest me on what source code do i need to write in RFC

Hi Naina,
Normally RFC are synchronous, they do have return parameter as export parameter.
If return parameter is missing then , you can create Wrapper RFC.
Wrapper RFC:
It is nothing but you just create BAPI in SE37 transaction with Return parameter as export parameter and make it remote enabled by clicking on Radio button.
Under source code, CALL BAPI which XI has to call.
Thats it!
I hope this helps.
Let me know if any help required.

Should I just wait untill the Intel Mini's are out to make the switch over?

I have been somewhat active on this board for the last month or so looking at the Apple Mini. I want a computer that never really slows down, or crashes a lot. Also, I want a computer that can do some light video editing, and some light gaming (think: Battlefield 1942!).. I'm thinking about waiting till the New Intel Mini's come out but I really don't know when that will be! I don't know if I can hold on for 8 more months with this crappy thing they call an OPERATING SYSTEM.
Do you guys know when the Intel's are coming out? When they do, thats when I might make the switch from XP to mac OX.
Thank you all!

Though a bit belatedly, I thought it might be worth pointing out an issue that ought to cross the minds of those considering buying a mini but not sure whether to wait for the Intel models or not.
Aside from the fact that no-one knows when the Intel minis will be announced and what specs (thus performance) they will have, and the fact that as soon as the first models are out, there will be a tendency to want to wait until the next revision for the 'rev.a' bugs to get ironed out and some speed bumps ironed in, one important extra consideration is the software that's intended to be run.
All software at this time is G4 compatible, and many titles are either already in universal binary, or about to be so, thus would run natively on an Intel-mini. But some, Adobe CS and Microsoft Office (to name a couple of significant examples) are not universal yet, and while they likely will become so, it's not at all clear when. Until they ARE universal, those apps will run in emulation on an intel Mac, and performance is not reported to be stellar.
So I'd suggest to anyone considering the issues, to look at the titles you want to run, and make sure all the important ones are Intel-native already, or going to become so very soon. If they are, then waiting for an Intel mini is perfectly reasonable as long as you don't have any immediate need and can wait however long it takes. But if any crucial apps are PPC only and likely to stay that way, I'd buy a G4-powered mini while they're still available, and trade it later when the crucial apps go Universal and the Intel models have settled down.

I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

It may be due to Continuity
The following quote is from Connect your iPhone, iPad, and iPod touch using Continuity
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.

When the phone is in protection mode lock and comes a missed call .. and when you scroll to the number, the phone call is in safety mode ... I want a solution to this problem .. Thanks

When the phone is in protection mode lock and comes a missed call .. and when you scroll to the number, the phone call is in safety mode ... I want a solution to this problem .. Thanks

I've tried to respond to your post, but I cannot understand what you are asking. Also not a good idea to post your personal information on a public forum. I've asked the moderator to edit the post.
Now, please explain what safety mode means, and we will try to help.

IPhone 5 recharging, shd I wait until the battery is empty?

Someone told me that the battery suffers if I do not wait until the battery is empty and stop recharging before the battery is full. Can I recharge the phone whenever I want and how long I want or do I have to wait until it is empty/full?

waiting until the battery is empty is a good idea but you have a limited amount of charge cycles but i recommend draining it fully
it doesnt suffer at all and it should have a 8-10 hour life of battery
yes you can charge whenever you want but you have a limited amount like 500
charge 4-8 hours

Wait until the session has been processed

Hi folks,
I have a report in which I create and trigger an SM35 session. I use RSBDCSUB report to do the same.
Now, is there anyway to wait until the session has been processed? I mean, I need to do a few things in the report only after the session has been processed.
Thanks
Sagar

Hi,
You could try checking the job status (table TBTCO) inside a DO or WHILE loop. To pause up to 5 seconds between your lookup on TBTCO, you can call function module 'RZL_SLEEP'.
If checking TBTCO does not work out for you, you can try the same loop logic with a call to function module 'ENQUEUE_BDC_QID' instead of looking up the job status. If the enqueue has been released then the job has finished.
Regards,
James G.

My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc)

My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc) I can't find why.
I trieds to go on Youtube and for that I have sound so it is just for the rings.
Can somebody help me please?
Thank you so much!
Mary

Have you checked your mute switch (right above the volume buttons)? If you see orange, it is muted and will affect the rings, but not the audio on YouTube.
Just toggle the switch so you don't see the orange and check again.

I am trying to authorise my new macbook air and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer

I am trying to authorise my new macbook air for i-tunes and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer

Always remember to 'de-authorize' you computer when selling or sending for service. If sending for repairs you might not get the same mother board or HD back and some how this counts as an authorized computer against your count.
MJ

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

Just create a new AppleID for your work.
As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
However, you can put items purchased on on account onto the other iPhone.

Bluetooth connected phone call waits until the person answers to connect through speakers! How to change this.

Similar Messages

Maybe you are looking for