Bluetooth connecting prob. - not appearing at all

I have the latest PcSuite, as well as the latest driver for the BT dongle ( it`s a "sitecom Bluetooth 2.0 -10meters CN-520" and driver is CN-520 Bluetooth stack 4.00.35 -Toshiba)wich is on the compatible list.
I had no problem what so ever paring the phone to the PC, manage to transfer files (wallpapers and stuff.) when i pair them, i did it though the pc, it installed a modem wich i can connect to the phone, also with no problem. The problem came when (after doing this) i installed the Pc-Suite and went to the connection wizzard. Bluetooth doesn`t even appear there!?? only the IR and cable options. I`m really lost here, why doesn`t it even show? Any help would be much apreciated..

Hi makaveli,
OK, now I understand your problems...I think you can try to use Microsoft BT (it should solve your both problems).
If you want to try to use MS BT, try this:
1. Go to Control Panel, System, Hardware and Device Manager.
2. Open Bluetooth Devices, select that device, click Action, Uninstall and OK.
3. Click Action and Scan for hardware changes.
(windows should automatic update install MSBT drivers)
And if you want to use old driver again:
1. Go to Control Panel, System, Hardware and Device Manager.
2. Open Bluetooth Devices, select Microsoft Bluetooth Enumerator, click Action, Uninstall and OK.
3. Select that BT device, click Action and Update Driver.
4. Select "Install from a list or special location" and press Next. Then select "Don't search. I will choose the driver to install" and press Next.
5. Select the second driver (which is not digitally signed) and press Next.

Similar Messages

Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

Yes....It happens all the time. I also erased my HD and installed Snow Leopard but with no success. Tried lots of REBOOTING but nothing worked for me.As I have already installed the new OSX I think there is no need to go through the below procedure. What do you suggest?
Before you go through the ritual of reinstalling the entire system just try to do a "factory reset" of your bluetooth environment. To do this you need to run the Bluetooth Explorer which is a utility installed as part of XCode.
1. Launch Bluetooth Explorer.
2. Select the "Modify Software & Device Configuration" from the Utilities menu.
3. Keep the first 4 checkboxes checked (one will say "Full factory reset").
4. Click "Perform actions" button (lower right of window).
5. Reboot (possibly the Reboot NOW button will work, if not just do a normal reboot).
Hopefully that will clear your problem(s) so you can re-pair your bluetooth devices.
Good luck.

When I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

when I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle or changes in the moving waveform graph with changes in noise level trying to be recorded.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Adobe extension show in the Extension Manager and are enabled but do not appear at all in Photoshop CC 2014.

Adobe extensions show in the Extension Manager and are enabled but do not appear at all in Photoshop CC 2014. Third party extensions do show up and can be used. All extensions are available in and can be used Photoshop CC. I have reinstalled CC and Extension Manager to the most recent releases and the Adobe extensions are still not available in Photoshop CC 2014. What should I do now?

Flash based extensions are not supported by PS CC 2014 anymore. Please refer to http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html, http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
And http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins (scroll down to "Why don’t my 3rd Panels show up in the 2014 release of Photoshop CC? What happened to Oil Paint, Mini-Bridge & Kuler?”)
There is a new Kuler HTML5 panel available on Add Ons: http://adobe.ly/UgxQSN
Adobe is working on HTML based version of Adobe Watermark, eMailer, etc.
If some extensions are must have for you, you have to continue to use PS CC until HTML based counterparts become available.

After I covert my excel file to PDF, my images are cut off or not appearing at all HELP?!

Hello!
I am creating a Exel Work book and converting it to a PDF file (easy to share online).
Once I convert the Excel Work book, some of my images are cut off or not appearing at all.
Which I find weird because some images pop up just fine.
These images are originally flats from Adobe Illustrator I converted to pictures with Excel.
So why is that when I convert my workbook to a PDF file some images show through and others don't?
Please Help!
ORIGINAL EXCEL FILE
Once I save it as a PDF File. Other pages are fine except this one?

Correction for above: 'Bit depth' not ' Bid depth'

HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

Because line-in has been removed.
It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
You'll need to use a Griffin iMic or similar to use line-in via a USB port.
The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

TS1538 When I open itunes, "Devices" does not appear at all in the left column on the screen, therefore I can not sync my ipod touch.

When I open itunes, "Devices" does not appear t all in the left column on the screen. I can not sync my ipod with my itunes library. Suggestions?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

I have iTunes ver 10 on a PC with Playlists which do not sync to ITouch or Nano (6th Gen). All the music does not appear and the playlists do not appear at all. I have selected to manually manage music on the sum tab

I have iTunes ver 10 on a PC with Playlists which do not sync to an Itouch or Nano (6th Gen). Also, all the music does not appear when I check entire library and there is enough memory on the device. When I select to manually manage music on the summary tab and selected playlists on the music tab nothing changes. Either way all the music isn't on either device and the playlists are not on either device. Please advise next steps. Thank you.

Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start.

Bluetooth speaker does not appear in "playback devices" list

I'm having trouble controlling my new Auvio HBT2000W speaker via bluetooth from my Y580 ideapad running Windows 8.1. They successfully pair, but the speaker does not appear in the "playback devices" to output my audio to. This may be related, but when in "devices and pritners", if I right click on the Auvio HBT2000W and select "control", the window that pops up (shown below) always closes after about 2 seconds. I have tried all the unpairing/repairing, restarting, etc.I've tried updating the bluetooth driver with the one posted on this website.I've disabled the "allow the computer to turn off this device to save power" on the Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)I've made sure that all "services" are enabled in the properties window for the Auvio HBT2000W.I've even tried the Windows troubleshooter... which of course says that everything is fine and working properly. Anyone seen this before or have any ideas?Thanks!

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

Line item data does not appear on all master pages - Adobe forms

Hi Guys,
I have a problem in Adobe forms as explained below-
I have a page in the form which has, you can say, a 2 windows or subforms ( Information window/subfirm on top right corner, main on middle of the page ). The data of the main subform is a line item data of delivery. Some parts of the same data need to be printed on the Information subform also. The main subform can overflow to next pages but the information window will have only very limited data to be printed on one page itself, meaning it does not overflow.
Now the requirement is that each line item should be printed on a new page. For example if there are 2 lines items then first line item should be printed on first page. Then there will be a conditional page break and the next line item will be printed on the next page ( I have achieved this using condition page break). The information window will contain information related to corresponding line items. If the first line item data overflows in main then information window of first line item should be printed on first and 2nd page. The second line item should start printing on 3rd page and information window of 3rd page will contain data of 2nd line item.
I created 1 body page and 1 master page. I created one internal table with data of main window and information window. I put the information window on master page to make it appear on all the pages.
This solution unfortunately does not work. The issue is that in case of overflow, 1st page information window shows first line item. 2nd pages shows 2nd line item and 3rd page is blank whereas ideally 1st and 2nd page information window should show first line item and 3rd page should show 2nd line item. This means that master page and body page are not getting linked. If I create the information window on body page itself, it does not repeat on all the pages. Please provide some inputs to resolve the issue.
Thanks
Abhi

Hi Abhinav,
I am also trying to solve the similar issue. Need to print the internal table data in the Master page.
Have you resolved this issue. Can you Please share your solution .
Thanks
Swarna.

Finder does not appear in All Desktops

Suppose that you have set up multiple Desktops from Mission Control.
From the Dock, I choose Finder > Options > (Assign To) All Desktops. This is so that varius open windows on the Desktops will appear on All Desktops. However, this setting does not survive a restart. That is, after a restart, an open window on one Desktop will not appear on another Desktop.
I have tried to delete the file ~/Library/Preferences/com.apple.finder.plist. But, the All Desktops setting still does not survive a restart.
How can I overcome this issue?

This calls for an Applescript or formal application

An orphan photo will not appear in "All Images"

I have one picture in a project that does not show up when I go to "All Images" in the Library. I "imported" this picture from my desktop "Into the Aperture Library" but it did not show up in the Library.
Why doesn't it appear in "All Images"? All other images appear there.
Thank you for any help.

I should have said Smart Album.
If you control click on the library icon you will be able to select New > Smart Album. With that you can select all images (ie no filtering). That should show your missing image.
Is the date correct on your missing image? If the date is wrong, it will not appear where you expect it to. See here for some information on smart albums:
http://www.bagelturf.com/aparticles/library/smarta/

Album artwork not appearing on all album tracks

Hi,
I have a problem with my iPod 5th Gen 60GB. Not all the songs have cover art, although the cover art is visible in all songs in iTunes. The pattern seems to be that the first couple of tracks of an album show cover art when played/selected, but the remaining tracks have missing cover art.
Some background info. The problem started after I upgraded from Tiger (OS X 10.4) to Leopard (OS X 10.5). I didn't do an actual upgrade, but a clean install. After Leopard was installed I restored my iTunes Library and everything looked and worked fine. After I synced my iPod I soon discovered the problem of the missing artwork.
Based on suggestions on this forum I have tried several things to try and remedy the problem, but have not been succesful yet. Things I have tried:
1. Unchecked the option in iTunes for including cover art on your iPod. Synced. Rechecked the option and synced again.
2. Performed a factory reset of my iPod. Synced so that my complete library was placed on my iPod again.
3. Deleted the Album Artwork cache directory.
4. Configured iTunes so that the currently selected song's cover art was displayed in the little preview window at bottom left. Cycled through all the songs in my library, hoping this would do some black magic voodoo stuff with my library or cache.
The only thing I haven't done yet is to completely delete my current library and create a new one and import all the songs again. Needless to say, this is my last resort, because it's going to take a lot of time (my library location is actually on a Samba share) and it means I will lose all my song ratings.
Does anyone have any other suggestions? Thanks in advance.
Edit: I'm using iTunes 8.1.1

Note: You do not need to buy a song from the iTunes Store to use the online downloadable artwork for that song. You probably know that, but just in case...
If you have manually added artwork to songs, I believe it overrides any downloaded artwork. So as a test, you should select an album (one where the artwork does not appear on the iPod). Select the songs, right click, and +Get Album Artwork+. First, see if your manually added artwork still appears in iTunes. If you get the downloaded artwork showing up instead in iTunes, you can just give the +Clear Downloaded Artwork+ command; your embedded artwork is still there and should show up. I remember trying this to see what happens, and the manually added art had priority in iTunes (but that was a while ago).
If iTunes still uses your manually added artwork, try syncing to the iPod now. See if the downloaded artwork appears. If it does, at least you have album art. iTunes converts album art into a database format that is optimize in size and resolution, to take up the least amount of space possible on the iPod. Maybe there is something about the artwork, for the ones currently missing on the iPod, that prevents the conversion for some reason (too high resolution?). In that case, redoing everything probably will not help, if you are using the same artwork images.
Another thing you can try is to pick a song that does not have artwork on the iPod (but should). In iTunes, right click on the song. Select +Get Info+. In the Info window, go to the Artwork tab. Click on the artwork image and Delete to remove the artwork. iTunes should no longer show artwork for that song.
Sync the iPod.
Do a +Get Info+ on that song again, and go to the Artwork tab. Drag the artwork image you want to use as the album artwork from a Finder window, or from a web browser window, and drop it onto the artwork area in that iTunes song Info window to add it.
Sync the iPod again. See if this re-added artwork now appears on the iPod.
If that works, you can manually delete and re-add the artwork for the songs that do not have artwork on the iPod. Unfortunately, you cannot do the delete part for multiple songs at the same time (as far as I know). You must sync the iPod when there is no artwork in iTunes for the songs in question; you can do several songs before syncing. And you can re-add (at the same time) for a set of songs that have the same artwork, by dragging the artwork to the bottom right corner display on the iTunes window (instead of the the +Get Info+ window for a single song).

IWeb window does not appear at all

My iweb window doesn't appear at all. The application opens, and I can see the Inspector, but the main window is missing. Options such as "New Page" "New Site" are all greyed out.
It happened when just a few minutes ago, I was trying to publish changes in my site. Nothing seemed to be happening so I decided to relaunch the application. Then this happened.
I'm running version 3.0.1, updated some time ago, and I have not updated any other software for quite some time.
Does anyone know what is going on?? I think I will jump off the building if I have to re-install iweb and all my websites are gone.

The same thing has happened to me this morning. All my iWeb sites were working fine last night (I have seven different ones) but my iWeb is doing exactly the same as yours now. Two of the iWeb sites are for my business so if I have lost them through no fault of my own I will be royally p*ssed off.
Help!!!

Image does not appear across all browsers

On the main page, just below the "Available soon for..." there is an order now button. It only appears with Safari. I've tried Firefox, Chrome and IE and the image does not appear on any of those. The thing that gets me is that the image was there before and worked fine, all I did was make it bigger and relink it, so I'm confused why all of a sudden it doesn't show up.
Thanks in advance for any assistance.
http://turtlecell.com
Message was edited by: hcblue

when you say "Re-upload the image", do you mean reinsert it, or re-link it?
Neither.
Re-upload it to the web server from your local hard drive. In DW, click on the image file in the Files panel then click the Up arrow to Put the image to the server.
If that does not work, do as Nancy suggests and re-create the image in your image editor then re-upload.

Bluetooth connecting prob. - not appearing at all

Similar Messages

Maybe you are looking for