Bluetooth connection fail between E72 and Win7 (32...

Hi !
I have got my Dell Vostro 3700 with Win7 (Pro-32bit) recently, have been trying connect my E72 with OVI via bluetooth, it only work when the first pairing, and the connection cannot establish once i restarted the computer. Has anyone come across this problem ?
Regards,
Tedd

To be honest, I think the bluetooth feature of the E72 is absolute rubbish.
I paired my E72 with my car radio, in order to get calls using the car hifi and speakers. I also thought it would be a really great feature to hear the GPS voice directions coming through the car hifi.
It paired and worked briefly for a few minutes, when the BT connection just dropped. Like you, I couldn't get it to pair again without deleting it from the car hifi memory. Now it works when it feels like. I cannot rely on BT staying connected for longer than a few minutes.
My other phone, the N78 is rock solid when connected via BT to the car, so it definitely is the E72 at fault. Newer versions of firmware don't seem to help either. I've written to Nokia, but as usual they ignore me.

Similar Messages

My home sharing continually fails between mac and apple tv 2.

my home sharing continually fails between mac and apple tv 2, even during watching a movie. I go to the mac to re-turn on home sharing but it is still on. Any tips? I also have to turn off and back on at the mac every time i switch on my apple tv.

Sharing Stopped working again over night.
I went to Apple Support Artical TS2972
As soon as I did this Home Sharing started working
http://support.apple.com/kb/TS2972
Firewall Section
5. Check Firewall Settings
If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
Block all incoming connections
Allow only essential services
If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day. This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
Tommorrow will be the true test.

(UIX XML) Sharing Connection objects between BC4J and custom java.

If I have a UIX XML page that contains some BC4J application modules, then in the event handler I call [public static EventResult handleMyEventEvent (BajaContext context, Page page, PageEvent event..) ], which in turn calls some java classes I have written that take a java.sql.Connection object and access the database doing some updates/inserts with this Connection object (via JDBC)....HOW CAN I USE THE SAME TRANSACTION AS WAS USED IN THE BC4J APPLICATION MODULE...i.e. CAN I SHARE THE CONNECTION OBJECT BETWEEN BC4J AND MY OWN JAVA CLASSES THAT USE JDBC?
What are the best ways to share such a transaction?
Thanks,
Paul.

Would it be easier to use a custom method on the bc4j Application module?
Take this scenario...
1. User opens UIX XML web page which opens a bc4j App Module..it has a VO based on all employees.
2. User presses the add button and a new employee is created (using the bc4j App Module).
(Notice: no commit yet!)
3. User presses the submit button...fires event REVIEW_SALARY.
4. This event is 'handled' in the event section of the UML XML...it calls:-
public static EventResult handleREVIEW_SALARYEvent (BajaContext context, Page page, PageEvent event)...
5. I now want to call a java class I wrote that computes an employees new salary and updates the employee record with this new salary. This update will fail unless it is part of the same transaction as the one used by the bc4j App Module (that inserted the new employee).
How best to proceed from here?
How about having a method on the bc4j App Mod's VO called 'reviewSalary'? Calling this would use the same transaction? I could then call my java class from within the VO's method? However do I still have the same problem in that my java class expects to be passed the connection object?
The approach you suggested previously seems a touch dangerous....in that these are not 'publically exposed'...and a new release of JDev may break my code.
Thanks,
Paul.

Connection fails between N97 mini and Ovi Suite

Hi,
I have had many kind of problems connecting my N97 mini with my laptop but have finally hitted the edge in this issue and didn't find an answer existing here.
When I updated my Ovi Suite to the latest version the connection to my N97 mini was cutted off. This was maybe two weeks ago and I haven't been able to connect the phone to the laptop with PC suite connection form ever since (and no further updates available). I can sure connect with the Ovi Music in other connection forms and store the music to my phone but any connections with the Ovi Suite fails. There for I cannot sync my photoes or address book or get the new updates by my computer. What could I do to get the connection back? Install an older version again? Where to get one?
Today I checked the program updates with my phone application and there is software version 12.0.110 available to upload. Well, my phone does offer for other updates to "start to update" but this one gives only option to "update via computer" (sorry I don't know the exact terms for the option written in the quotes since I use my Nokia in Finnish ). How could I get the updates to my phone via computer when I cannot connect with the Ovi Suite anymore??
I really hope anyone have had the same problem (it's really irritating) and still hopefully wait for some answers...
Any help sincerely appreciated!
Solved!
Go to Solution.

Unfortunately there is no easy solution to this one as it is probably de to the installation of the Ovi Suite update on your laptop.
The first thing you could try is to uninstall and reinstall Ovi Suite. You could also try using the PCsuite cleaner which should ensure that the previous installation is properly removed before reinstalling.

Bluetooth connection failed...

Ok, I was using my bluetooth fine the other day and then later on that night, I started getting an error message saying "The connection failed or closed, would you like to reconnect" I don't know what happened. I've switch to snow leopard but that was a few weeks ago. I'm trying "browse device" and get pix off my nokia e63 and I was able to pull like 10-15 pix earlier that morning and now nothing. I've tried the SMC reset, I've tried restarting my comp, I don't know what else to do. Any suggestions? I have the 13" macbook. This is a picture of the error: http://twitpic.com/kjojb

HI,
Open System Preferences/Bluetooth. Delete the camera from the list and restart your Mac.
Go back to System Preferences/Bluetooth and re "pair' the camera. If the camera requiers batteries, make sure they are charged.
If that doesn't help, try deleting the Bluetooth preference file.
com.apple.Bluetooth.plist
MacintoshHD / Library/ Preferences.
Move that .plist file to the Trash and restart your Mac.
Carolyn

Why there isnt direct cable or Bluetooth sync link between iPod and iPhone?

I own both the iPod and the iPhone, both linked to iTunes. It is only possible to sync between the iPod to iTunes or between the iPhone to iTunes.
Why there is no possibility to directly link and sync between the iPod and iPhone ?
I will explain why this is bothering me so much. While on vacation I bought some songs from iTunes directly from my iPhone.
When i needed these songs on my iPod, it was inpossible, becouse my PC was left at home.
Because of this I am wondering don't you think irrational the impossibility to have a direct link and sync between the iPod and iPhone via white cable or via Bluetooth connections meant only for the link sync with PC ?
I mean even Nintendo DS and SONY PSP have this kind of sync links.
Message was edited by: Arkam Knight

Rationally this means that if I can download the same things on both my devices
form the same PC based iTunes software, there must be some way to link the
same both devices directly by cable or radio frequency.
Sorry, but I do not see the logic here at all. The statement simply means iTunes can connect with multiple devices. It does not say iPods (or iPhones) can connect with each other at all. It simply doesn't work that way. I can pull a trailer with my car. You can pull a trailer with your car. Therefore my trailer should be able to pull your trailer? I don't think so.
If you think it is important, try making the suggestion at http://www.apple.com/feedback

E65 BLUETOOTH CONNECTION FAILED

Hi,
Pretty new to all this so bear with me! I have an E65 which I don't seem able to connect to a car kit that is built into my car.(TOYOTA VERSO) Have checked that bluetooth is switched on on my phone and been through my car manual which just tells me to pair it with the car - after the message pairing complete the connection fails.can enyone help me with this problem Any help or advice greatfully received as I've never had a problem in the past (had 6280 before which worked fine)
Thank

O Ke Do KE
Here is how I just did it with Parrot in my rav
Phone settings to start
bluetooth - on
My phones visibility -Shown to all (remember to change this to hidden after paired)
My phones name - if you haven't already give a short name ex "jarnok"
Then get the car unit ready thusly:
First you get car device ready to pair or looking for signal.
Then you go to phone and choose anyone in address book
Highlight (scroll to) phone number
press options and scroll to "send business card"
Press select
Scroll to "Via Bluetooth"
Scroll to "selected detail only"
Press ok
That should send to awaiting car device.
After that the units can talk.
Then change "visible to all" to hidden
That's it folks - even with symbian which is best for syncing outlook including notes in my humble opinion
Hopefully helpful
Joseph

BB 9100 Bluetooth connection failed paring with Blue&Me

HI,
I tried paring my BB 9100 bluetooth with my Blue & Me (CAR Bluetooth), while I enter the passcode It tried a connect for a while and displays a message that connection failed.
Please let me know how I cna connect my Mobile bluetooth with my car blue & me.
Thanks & Regards
Sunthar

Hi sunthar,
Welcome to BlackBerry Support Community Forums.
Is your BlackBerry able to pair successfully with another BlackBerry smartphone or Bluetooth enabled device? Have you tried the steps provided in this blog post? http://my.blackberry.com/tips/8000
If so, you may need to contact the manufacturer of the car kit for more information on compatibility or further instructions for pairing.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Bluetooth connection fails iOS 8.1

My iPhone5s cannot make a Bluetooth connectivity with any of my Macs(MBA mid-2013, iMac late-2012, MacPro) all running Yosemite 10.10. Prior to upgrading to Yosemite the same iPhone running on iOS 7 did make successful bluetooth connectivity. My iPhone5s is on 8.1. Surprising even though it cannot have connectivity, it sees and stay connected for a second or two and then will say "Not Connected". But the same phone connects with Blueant S4 handsfree Speakerphone - except that I have to make a connection each time. In the past, it used to connect automatically when I was in the range of my device.
Yes, I have tried reset PRAM, SMC resets on my Macs, powered OFF and ON my iPhone5s and even reset my NW connection. In addition, I have other iPhones in my family and none can make connection to Macs which run on Yosemite(tried 4s, 5 and even 6). But the same iPhones make successful BT on Macs running Mavericks and Mountain Lion(yes one MBP still exists). So I am guessing it is changes in Yosemite that is causing the problem. Because I am going through this problem - my family members who have Macs do not want to upgrade to Yosemite as they depend on BT connectivity for their external devices. I don't blame them, but sounds very silly to me that Apple messed up big time with BT connectivity. I see many reporting similar issues, but for many resetting PRAM and/or SMC they have been successful.
Any help would be appreciated. Again I am not referring to Handoff (which it is working for me) but I am interested in BT connectivity with Yosemite. This is important because external BT devices need to be connected(Headphones, Earbuds etc).

I went to the Apple store yesterday because I was having the same issue in my Honda Accord after I updated to iOS 8.1.1. The very helpful rep there suggested that I go to Settings -> General -> Reset on my phone to reset my iPhone 5 General Settings. She said that it's like an oil change for the phone that cleans out a lot of the junk. After doing this, I was able to stream both my music and Pandora in my car again.
Note: When you reset the General Settings, you will lose your phone password and background image (not a big deal). You will NOT lose your pictures, video or emails.
Hope that helps!

Share iTunes Library between OSX and Win7 Bootcamp

I've done quite a bit of research on this but I still haven't found a solution that does what I require.
Basically my setup is a SSD & HDD in my MBP. I have OSX and Win7 (Bootcamp) on the SSD and the NTFS HDD is a shared file storage drive for both Windows and OS. I have my iTunes library located on this drive and I want to be able to share the library between the OSs. I also want changes e.g. additions deletions made in windows to be reflected in OSX and vice versa.
Technically this is possible and does in fact work if I point iTunes to the .itl file but the problem is that when I open iTunes after switching OSs it must go through a very lengthy library update which can take 30-60mins in some cases before I can use it. Obviously this is not a good solution so I'm wondering if there are any workarounds to accomplishing this?
For example can I duplicate the .itl file and have one for win and one for OSX and still have the libraries stay in sync?

Just for your info, Vista ***** whatever you try to do. I'm stuck with Vista on a pre-installed laptop. All experience I have from Vista is bad, don't buy Vista or a computer with preinstalled Vista if you can avoid it.
We have three computers in a home network, one Macbook Pro, one PC with Windows XP, and the Vista laptop. All are using iTunes-8, downloaded and installed last week.
Sharing iTunes libraries using the option to share libraries on a local network works fine between Mac and Windows-XP. The sharing also works fine between the XP and the Vista PC.
But the Vista PC can't access the Mac iTunes library. When trying to open the Mac library, iTunes on the Vista computer says something like "Fetching library info from...". It's the same problem when trying to access the Vista library from the Mac.
We had a similar problem when trying to access shared folders on the local network. Thanks to a tip on this forum how to tweak the Vista registry, the shared folder problem was solved.
I'm think some registry setting in Vista might solve iTunes shared library problems. Maybe some Windows freak knows how to patch the registry to solve this issue.
Otherwise the solution is to trash Vista, and install Windows-XP.

Oracle connect failed on x64 and IA64 platform via Oracle OLEDB provider

Hi everyone,
I installed SQL Sever on x64 and IA64 machine, and Create a database via Oracle datasource. I can connect the datasource via OLEDB and .Net provider successfully on x86 machine. But failed to connect the Oracle datasource on x64 and IA64.
Following is the error messgae:
1) Install 64 bit build on x64 machine:
Error message: Test connection failed because of an error in initializing provider. ORA-06413: Connection not open.
2) Install 32 bit build on x64 machine:
Error message: Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
I know there is a know bug on c:\Program Files (x86)\... with Oracle provider. And some one has given a workarround method that I should move my my application out of the the folder path which includes parentheses. But it really is mess method for SQL Server (That is my application)......
Is there any other workarround method? Or when will Oracle fix this bug?
Thanks^_^
Lindsay

Is 10204 available for x64 and IA64. It is said that there is only 10204 for x86 machine, right?
I downloaded 10203 for IA64 machine and tested connection on SQL Server with Oracle datasource via Oracle OLEDB provider, and got the following error (The data source is Oracle92 installed on another machine):
Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Could you please tell me what's wrong with it?
Thanks
Lindsay
Message was edited by:
lindsaywang

Connectivity loss between PLC and Kepware

Hi Experts,
I m working on SAP PCo and PLC connectivity using Kepware.
I m trying to find out ways to find connectivity loss between
1) PLC and kepware
2) kepware and PCo
For 2nd approch,if connectivity loss is there then PCo instance will go in error state and using remote monitoring we can get alert.
But m not able to find any way for 1st approch.
If PLC connection lost then only tag quality in kepware is bad.
Is there any way in PCo expression editor to check tag quality so that i can trigger MII transaction?
Thanks in advance.
Regards,
Neha

To add to Hubrisnsx's comment ... are you provisioned Ethernet or MoCA for the WAN connection?
Edit: Never mind, I see in the first post you said MoCA. So, if the MoCA channel is staying up, then it sounds like it might be something inside the ONT.
Keep in mind that while some Verizon folks do drop by these forums from time to time, that this is primarily are user to user forum where customers can help one another.

Connection failures between iMac and Macbook Pro

I'm experiencing frequent connection failures over my wi-fi network between my iMac and Macbook Pro on an otherwise strong, stable network. I can connect both of my computers to the Airport Time Capsule that I use as my wireless router without a problem, but for some reason I get connection failures between the computers say, 50% of the time. Sometimes it works fine, others it just hangs before giving me an error message. Any suggestions?
OS 10.9.3 on both machines
Apple Airport Extreme Time Capsule
iMac, 3.06GHz i3 (2010)
Macbook Pro Retina, 2.4 GHz i7 (1st Gen)

Hi jt in nyc,
Some checks:
Use Airport Utility on one of the machines
- Click on the Time Capsule ( enter password if prompted )
- Click on the Edit button
Under Airport Utility -> Wireless -> Wireless Options
Are the Time Capsule Wireless options set correctly?
- Country -> you know this, change if it is not
- 2.4GHz and 5GHz Channel set to Automatic
- Click on Cancel button to return to the Airport Utility graphic diagram.
- Click on the Time Capsule
- Click on your machines listed beside wireless clients
Are the machines reporting an excellent quality at different distances from the Time Machine?

Problems with bluetooth connection to wireless mouse and keyboard

I am using a mac book (aluminium) with 10.6.4 with a Cinema Display and a wireless keyboard and mouse. My time capsule is located only 1 meter away from the mac book and every time the automatic sync starts my mouse and keyboard do not repsond anymore. It seems that the bluetooth connection is somehow heavily loaded due to the network traffic. I have updated all devices and restarted the computer several times. It always keeps on doing that. Any help?

philip_axmann wrote:
every time the automatic sync starts my mouse and keyboard do not repsond anymore.
what you are seeing is called _*wireless interference*_.
change the channel your TC broadcasts on.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Connecting OC48 Between ASR9K and ASR1K

Hi there.
I don't know the first thing about the WAN something like POS...
Now I'm facing some problem with connecting OC48(POS) between ASR9K and ASR1K.
There are new 9K and new 1K in same server rack for the test.
So i tried to test these for connecting OC48
9K and 1K is directly connected by OC48
9K : A9K-SIP-700 // SPA-2XOC48POS/RPR // SFP-OC48-SR
1K : ASR1000-SIP10 // SPA-1XOC48-POS // SFP-OC48-SR
After connecting these two devices directly, ASR1K shows the interface status is up/up
but ASR9K ... the interface status is down/down.
I didn't configure anything. Do i need to configure something ?
When i connected POS port 1 and POS port 2 directly in the same ASR 9K chassis, the interface is up/up
please help me out
Thank you in advance. :)

exactly, so the transmit side of the 9k needs to be connected to the receive side of the 1k.
the transmit side of the 1k needs to be connected to the receive side of the 9k.
download this doc for reference:
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR1000/asr_sip_spa_hw/ASRsov.html#pgfId-1136398
Another link discussing the type of testing you are attempting:
http://www.cisco.com/c/en/us/support/docs/optical/synchronous-optical-network-sonet/16181-posclocking-16181.html

Bluetooth connection fail between E72 and Win7 (32...

Similar Messages

Maybe you are looking for