Bluetooth connection not present

The option for me to use bluetooth doesn't exist in my pc suite. It was there, but has disappeared.
I have re downloaded and repaired pc suite, but still no joy.
Any ideas?

Hi modcar
You don't say what model of phone you are using, which version of PC Suite or whether you can still connect by cable, which might help
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Ipad Bluetooth connectivity not working

I have the ipad 2 and my Bluetooth will not find any devices. I've tried everything from restart to restore. Does anyone have a clue how to fix it? Thanks!!

Connect SoundLink to iPad
1. Turn the speaker off and on again.
2. Clear the speaker memory if necessary.
3. Make sure all other Bluetooth device nearby are turn off e.g. iPhone and laptop.
4. Make sure your speaker is in discoverable mode; press Bluetooth button down for 3 seconds.
5. Make sure the Bluetooth capability on your iPad is turned on.
6. Your Bluetooth device may be out of range – try moving it closer to speaker.

Bluetooth connection not working on US Nokia phones from J2ME Midlet (MIDP

Hi All,
We are developing a J2ME midlet (MIDP 2.0 ,CLDC 1.1)which makes bluetooth connection to other devices.The bluetooth
connection is working perfectly on indian nokia phones with Airtel as carrier.But when we deploy the same midlet on Nokia E71
US phone with carrier as AT&T ,the bluetooth connection is not working.The sample code is as follows:
public void run(){
try{
StreamConnection connection = (StreamConnection)Connector.open(btConnectionURL);
// open an input stream to get some data
InputStream in = connection.openInputStream();
byte[] serialData;
readData = true;
while(readData == true){
int lengthavai=0;
lengthavai = in.available();
if(lengthavai > 0){
serialData = new byte[lengthavai];
int length = in.read(serialData);
System.out.println("data read: " + new String(serialData));
dataViewForm.append(new String(serialData));
in.close();
connection.close();
}catch(IOException ioe){
ioe.printStackTrace();
when we try to connect on US Phones],the execution hangs at the following line of code:
StreamConnection connection = (StreamConnection)Connector.open(btConnectionURL);
No exception is caught.
Our midlet is not signed.
In the Forums it is said that the problem is with the unsigned midlet.AS some of the US carriers block the secure API usage
on Unsigned midlet.
But our question is, if we buy a code signing certificate from Verisign or Thawte and sign the midlet, will this problem be solved.
Any other alternative solutions for this ???
Immediate help will be appreciated.
Thanks,
Yash

You might want to read this before buying a certificate:
http://javablog.co.uk/2007/08/09/how-midlet-signing-is-killing-j2me/
It's not my blog, but I pretty much agree with what it says. Unfortunately the network operators can control the access 3rd party trusted certificates have, so even if you sign with Verisign for example, the signed midlet may not have any more privileges than an unsigned midlet, depending on network. They do this so that only midlets signed with one of their own certificates have unrestricted privileges forcing anyone who wants a useful application to buy it from the network instead of downloading an equivalent freeware version from Getjar for example. Some networks are worse than others, so signing your midlet will allow it to work on more phones than an unsigned midlet. I think Verisign have some info on AT&T on their website.
The whole MIDP specification for security is a joke, IMHO. I don't mind unsigned midlets flashing up a warning once during an application. Writing 20 files, for example, will give 40 security warnings for reading writing data which is ridiculous, as the user obviously either trusts the app or he doesn't. No one runs an app that they only sometimes trust.
As far as I know the only mobile manufacturer so far to see sense is Sony Ericsson. All of their new phones from Java platform 7 onwards allow unsigned applications access to the file system, bluetooth etc with just one warning when the applications starts.
Andy

Bluetooth connection not working

I just received a Braven 625s wireless speaker for Christmas. After updating my Bluetooth driver on my machine (which now reads "ThinkPad Bluetooth 2.1 with Enhanced Data Rate II") and re-adding the device, I finally got it to work wirelessly. However the Bluetooth connection will not persist consistently.
It originally went off after about 30 minutes. I saw another post on this board that said to uncheck the “Allow the computer to turn off this device to save power” box under the Power Management tab of the Bluetooth device in Device Manager, so I did and that allowed the speaker to work for about an hour before it went silent again. It remained silent for about 10-15 minutes before the sound came back on. The sound remained on for about an hour, and then went off for about 20 minutes, then back on for 15 minutes, then went off and remained off for over 50 minutes before I manually disconnected the Bluetooth connection.
During the other times of silence, I am not manually doing anything with the connection or the speakers- the speakers remain on and the Bluetooth connection remains Connected. Even in the Playback Devices section, I could see my Bluetooth device look like it was working (the green bars would bounce up and down as if they were playing the music that was still “playing” off of my Lenovo), but no sound was coming out of the speaker.
Can someone help on why this is happening? I also saw another post that their Lenovo had a loose Bluetooth slot in their motherboard. Could this be it, or what other causes are there for this behavior?
thank you.

Hi, heath
What is the machine type and model of your ThinkPad, and what is your operating system? Also, when the event described in your post happened, were you using the computer actively, or just something like playing music or watching a film? And what version is your Bluetooth driver?
My first recommendation would be to make sure that your BIOS is updated, as an older BIOS can sometimes be responsible for odd issues. You can find the latest BIOS for your system here. Just select your machine type and find the driver associated with your operating system.
Best of luck, and let me know how it goes
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Bluetooth connect not showing up as option

I had a computer problem and had to reset my laptop back to factory settings. Now my blackberry is not working correctly with bluetooth. I have a curve 8310 and a laptop with vista 32bit. When I open desktop mgr, it automatically recognizes my bb thru bluetooth. I can send and receive files from the laptop to the bb and vice versa. The problem is that the blackberry does not have "connect" as an option. Under Bluetooth options, all my services are listed. Under device properties, the only service is a com port. I've tried refreshing service list and nothing changes. I can't figure out how to get "connect" back as an option so I can actually connect to the laptop. Can anyone help me please?

I would re-send the service books via BIS.
Ask, and ye shall shall receive.
Build it, and they will come.

Podcast app auto-play on bluetooth connect, not wanted!

I've read several threads regarding annoying behavior of audio apps while connected to bluetooth audio devices, but none directly relating the problem I have.
In fact, the thing that bothers me appears to generally be considered to be desireable to most people commenting in these threads:
I'd like to have the option to just turn off auto-play when my phone connects to my bluetooth car radio.
Sometimes, I want it to do that, other times, I want to hear my radio, and I am really annoyed that I have to pull the phone out of my pocket, switch it on, enter my security code, switch to the podcast app, and finally, touch the pause button!
I can't find an option in control panel, or the podcast app that allows me to disable bluetooth auto-playback when I don't want it doing that.
I've got an Iphone 5, running IOS 6.1.4 (10B350) and podcast 1.2.1 (331), both of which must have already had the problem that most of these threads address fixed.
Am I overlooking something? Is there a way to tell podcast to mind its own business and not take control of my car radio when I get in and start the motor?
And no, I don't want to just turn off bluetooth! We have a law in this state (Oregon) that says you can't fiddle with your phone while you're driving. I want my phone to connect automatically, but I want podcast to shut up unless I tell it to auto-connect.
Thanks....

I reallly need some help here, folks, this is becoming an unacceptible situation!
Update: I read on several of the other threads about bluetooth and podcast issues that the only solution that works is to delete the podcast app and use the music player to listen to podcasts, so I deleted it not long after I made the original post, which meant I had to re-download my podcasts with my phone connected to a computer running itunes.
This morning, I drove my car for the first time since deleteing the podcast app, and I was disturbed to hear one of my podcasts playing though the car speakers!
I don't have any music stored on my phone, so I don't know if the music player would have started playing music every time it connects to the bluetooth reciever in my car radio, but I can only assume that it does do that since it started playing my podcast.
There's no option in settings for music or bluetooth that lets you either tell music not to play when the phone connects to a bluetooth audio device, or to tell bluetooth in the phone what apps to start up on connect.
This is a major oversight in my opinion, and Apple should fix it.
Does everyone but me want music to automatically start whenever their phone connects to a bluetooth device?
Is there a solution to this problem?

Problems Car-Kit CK-7W Bluetooth connection not st...

Hello,
I have the following problem :
I have in my Car a Nokia CK-7W Car-Kit. The phone i use is a Nokia N73 with the latest software 4.0736.3.2.1.
the only connection i use is the bluetooth i dont use the cable connection.
Verry often when i am calling someone the connection is suddenly not good anymore. there is suddenly a lot of noise so the person on the other side is just hearing noise and could not understand me anymore.
Calling again will not solve the problem they cant understand what i am saying.
The only solution is to turn the ignition key to 0 so the car-kit is turned off and then restart again.
Also has to power off the N73 and back on --> problem solved for a while.
I have tried with my older Phone Nokia 6280 there the problem is not the same. Sometimes it is also not good but not the same as with the N73.
With the 6280 i have also a different problem that it is not posible to disconnect the line when calling. so when i push the CK-7W button for a disconnect the line keeps open the only option is the read key on the phone.
So i dont know exacly what is defective , is it the car-kit or are both the phones not good.
Does anyone has the same problem.
Someone told me that it is because i have one of the first CD-7W car-kits so they have software that is to old. I dont think that it is normal that there are so much problems. They have told me that i have one of the first versions because my paing key is not 0000 but a nr in my case 1819.
When the CK-7W Module is defective , does anyone know if it is possibe that i just buy a Module without the other accessories.
Thanks for the advice.
DCA

Hello,
I can ubderstand if yo have installed more than 100 CK-7W that you are sure that the passcode must be 0000.
I am 100% sure that on my original box there is CK-7W and on the manual the passcode is 1819.
I have also a POP connector + cable (wich is not installed ) to connect the phone with cable. Has the CK-1W also this possibility ?
What i dont can see is the correct nr ont the main unit because it is stiil someware behind the dashboard.
The only think i can think of is that i have received a ck-1W like you told but is was in a CK-7W box. The manual deliverd was also CK-7W but the passcode was on a label that was put on the manual so they have the possibility to make a misttake.
I dont think that after +- 3 year i can go to Nokia an ask them for the correct one ?
So someone had made a mistake , maybe at Nokia or maybe in the shop. Why i dont know . the only thing i know is that i have a lot of problemens with this stupid thing.
If you have installed 100's of the CK-7W can you advice me if the stupid thing is working fine or that i be better of to buy another one ?
I only need a goed stable working Car-Kit not with display,....
Thanks
DCA

E71 Bluetooth connection Not found

I'm trying to connect my computer to my phone. When Ovi searches it finds my phone then when I click to connect it searches and seaches and tells me this:
"Bluetooth modem might need to be installed on your computer."
Then after awhile it says it failed to connect.
I'm able to send files from my computer to my phone using Bluetooth. But not when I'm in the Nokia Ovi Suite program.
Any help with this will be greatly appreciated.

i have same problem also. Toshiba Satellite A300 2D4 Windows 7 x64 SP1 Toshiba Bluetooh stack v.8.00.02 with Nokia Ovi Suite 3.0.0.290. There is no problem with PC Suite 7.1 but we cannot use the Nokia Maps on the PC Suite.
Attachments:
error.png ‏181 KB

Bluetooth module not present after installing 10.5.7 update from 10.5.6

After installing the 10.5.7 update on my unibody macbook, I can not see the bluetooth option in the mouse preferences. and when i go into the mouse preferences i get the following error message. "The Bluetooth tab of keyboard & mouse preferences is hidden because you don't have a Bluetooth module installed or attached to you computer".
This occured after i installed 10.5.7 update. It was working fine before this.
I have tried restarting my system without success.
Is there a way to roll back to 10.5.6?
Message was edited by: psybonix

Update:
Applied Bluetooth firmware update this weekend and so far my mighty mouse disconnects a little more often than it did before the update. I was beginning to think it was solving itself as the disconnects seemed fewer and less often until the firmware update. May be coincidental, but it looks like the firmware update, at the very least, was not meant to address this particular problem. I guess I'm going to have to buy a wired mouse.
Let's see now, starting with 10.5.5 my MBP has been plagued with frequent wifi disconnects and starting with 10.5.7 the bluetooth drops out frequently. This is very aggravating.

Third Party database connections not present

I just downloaded the latest production build: 3.0.04.34 and I'm trying to setup a migration from MSSQL Server to Oracle, but the only connection options I am given are for Oracle and Access. This, in spite of the fact that all the 3.0 documentation states there are separate tabs for other third party vendors in the connection dialogue. What am I missing?

You haven't read the documentation properly.
The third party tabs don't appear until you have downloaded and registered the appropriate 3rd party JDBC drivers. This is described clearly in the help file.

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

Hi
I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
Thanks for your input
Felix013

try a RESET ALL SETTINGS

I am having issues with my iphone6 bluetooth connection in my car. When going to settings under bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution yet?

I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class. When going to settings under Bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution from Apple yet?

Hi susan from WSL,
Welcome to the Apple Support Communities!
I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article.
If you can’t use a Bluetooth accessory or car kit
Cheers,
Joe

Printer not present when trying to connect even though drivers have been installed

printer not present when trying to connect even though drivers have been installed

Hi Marc,
If you are having issues with printing from your iMac I would suggest that you troubleshoot using the steps in this article -
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
Specifically -
Troubleshooting steps you can use if there is an issue
Ensure the printer is connected, has power, has ink / toner, paper, and no alerts on its built-in display.
Network based printers should be on the same subnet; you shouldn't have to worry about this if your printer is on your home network.
Use Software Update for the latest available updates.
Delete the affected printer from Printer & Fax System Preferences, then re-add the printer.
If the issue persists, try these additional steps:
Reset the printing system (see below). Then, add the printer again.
If the issue persists, reset the printing system again. Download and install your printer's drivers from here. Then, add the printer again.
If the issue still persists, contact the printer vendor or visit their website for further assistance.
Thanks for using Apple Support Communities.
Best,
Brett L

Can not connect to internet using bluetooth connection with Nokia N95

Hello!
I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
When i connect using usb cable connection between Nokia and Mac - everything is OK.
Where is the problem?
Thank you!

Hello!
I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
When i connect using usb cable connection between Nokia and Mac - everything is OK.
Where is the problem?
Thank you!

Bluetooth connection not present

Similar Messages

Maybe you are looking for