Bluetooth connection with my hands-free device

Hello,
Several days ago the operation system of my Q10 was updated by 10.3.1.1779 release and now I have a problem with bluetooth communication with the built-in hands-free device  in my car.  My contacts app alredy is not recognized, so I cannot dial numbers from my contact's list and couldn't recognize a number who is calling. Also the numbers dialed haven't been memorizing...
Could you suggest any decision?

Hi had a same problem, after upgrading to 5.0.2 on my D6633 with my Honda. I have reset the phone and as well deleted all other devices I use at home (MAP-S1, SRS-X9) plus uninstalled SongPal application that controls them and all working now. This THROW function is usless only cosing problems

Similar Messages

  • Not allowing bluetooth connection to car hands free

    Hi
    I have a blackberry curve 8520 and a Bury hands free kit.
    Normally as soon as the car is switched on the Bury comes on and starts searching for the blackberry and finds it immediately over the bluetooth and connects without any trouble.
    Recently it no longer does this. Now I have to stop the Bury auto searching, turn off the blackberry bluetooth and then turn it back on for the bluetooth to connect.
    If I allow for the Bury to keep searching you can see in the wireless networks screen that if briefly connects for a second and then disconnects and continues to do this.
    I have restored the Bury to factory reset and it is not the Bury device because my Blackberry Pearl connects fine without any problem, it is my other phone that won't connect.
    I have deleted it out of devices, played around with encryption settings and tried every setting I can see.
    What is going on? why is my curve not allowing a connection to be made? I don't understand what can have happened for it to suddenly not work.
    Any help would be great.
    Thanks

    as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

  • Bluetooth connection to car hands free

    i have a motorola car hands free kit installed with my old 6230i the connection was automatic but i now have a 5500 sport this needs to be re-installed every time i get into my van does anyone know why or is the sport a H.O.S

    If you try resetting your motorola car kit ( i dont know how) then pair your phone again this should work. also in your phone bluetooth settings see if you can change the motorola kit to automatically authuorise connections. It sound like the kit is still looking for your 6230i which needs to be deleted.
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • 6120 connecting with HFP (Hands Free Protocol)

    Hi all,
    I've just got myself a Sony bluetooth walkman with hands free kit but I'm having trouble with connecting them to my Nokia 6120.
    The Sony FAQ page states
    When you use a BLUETOOTH mobile phone supported by both HFP (Hands-free Profile) and HSP (Headset Profile), set to HFP (Hands-free Profile).
    Note: For details, refer to the manual supplied with your BLUETOOTH mobile phone
    So I need my phone to stop thinking it is a fancy media player and to communicate with my headset as a normal hands free kit and not as something more fancy like A2DP, as that is what my walkman is trying to use.
    Please help me out if you can.
    Thanks
    Graham

    I can make and receive calls but the text message doesn't work, I no longer get them on the dash screen and unable to have them read aloud. 2014 CRV

  • 9860 Bluetooth problems with car hands-free

    I have a Torch 9860 that has problems with my new 2012 Hyundai Santa Fe. I can pair it with the bluetooth in the car, and it will sometimes keep the connection on the next trip, but usually I get a 'connection failed' message.
    If I revert to the previous OS version, the problem goes away. I had to have the phone replaced recently, though, and the problem is back. It works great with a Jabra earpiece, but not with the car. I could do the same downgrade, but I would prefer not to.
    Any ideas, please?
    Thanks!
    Solved!
    Go to Solution.

    Another user posted, and it worked for me ... go into the properties of the Bluetooth connection and disable everything except 'handsfree dialing.' You will probably then have to re-pair. You won't get streaming music, but I never use that anyway. Hyunday is supposed to be working on a fix, and gave me a rough date of the end of the month. Good luck!
    Dave

  • Can I use my Bluetooth hands free device to listen/watch videos on touch 4g?

    I know I can connect my motorola Bluetooth hands free device to my touch 4th gen, but does anyone know what setting to change I order to listen to music and videos through the device?

    Go to Settings/General/Bluetooth and sync up the device there. Once done, you should be good to go,...

  • My iphone bluetooth  not connect to my hands free or parrot i have been using iphone 4s with6.0 software always worked now called apple no help so i restored my iphone 4 and that does not work i then tried my daughters iphone

    my iphone 5 bluetooth  not connect to my hands free or parrot i have been using iphone 4s with 6.0 software always worked now called apple no help so i restored my iphone 4  with 6.00 net work and that does not work i then tried my daughters iphone and blackberry and they connected
    I then tried i phone 5 in my daughters and sons car and no luck. I cant  get help from anyone  its a joke

    I found the solution to your problem. It solved mine right away and now I'm able to upload videos directly from my iPhone.
    Go to this thread: https://discussions.apple.com/message/17366529#17366529#17366529

  • I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.

    I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.

    I had this problem and what I did was: read the user manual. I was actually using the wrong buttons to put the Tri-BC200 on pairing mode. I also boot my I phone. Everything worked OK. Regards.

  • I am unable to pair my Iphone 4 with my car stereo or hands free device. It has worked in the past, recently stopped.  Please advise.  Thanks.

    I am unable to pair my Iphone 4 with my car stereo or hands free device. It worked preveiously; please help.

    The item that was previousl paired is no longer seen by the hands free unit.
    The new system, car stereo and Iphone see each other, but do not pair.
    Hope this makes more sense and you have a fix!!

  • HT201401 My 4s won't pair with my hands free in my car

    My Bluetooth on my 4s won't work with my bt handsfree in my car

    Re-boot both the phone and the nav system. If it still can't find it, verify that the phone can pair with a different hands free device.
    If it can, talk to Toyota and see if there is an update available for the nave system. There were known compatibility problems with some systems in Toyota and Lexus vehicles that were largely corrected by a system update.

  • Bluetooth connectivity with windows 7 ultimet 64bit

    Hi,
    I am not able to connect my iPhone 3GS with my Windows 7 Ultimate edition 64-bit Notebook.
    I can't able to pair with my both device.
    Can u help me out on this mater.

    M.Assafi,
    You keep giving incorrect answers and I've reported you to the moderators.  Your accound will be disabled if you continue to give incorrect answers.
    To the OP:  The iPhone has NEVER supported bluetooth connection with another computer except for the express purpose of tethering.  Bluetooth file transfer is NOT supported.

  • Windows Media Player 11 Bluetooth connect with N73

    Anyone can help me with connecting N73 to Windows Media Player via bluetooth?
    I have Nokia PC Suite updated and Bluetooth connects with it.
    I can see it on "My Computer" folder as a phone and also as a camera.
    In Device Manager, i can also see it as a "Portable Media Device"
    But Windows Media Player doesn't seem to detect it when it is connected to PC via bluetooth. Only when connected by cable. But as I want to get rid of the cable, how should I manage this?
    Thank you very much.

    As you are using Windows 7, you can use this extension from Microsoft - http://www.interoperabilitybridges.com/html5-extension-for-wmp-plugin

  • Hands Free Devices for Complaince w/CA Law

    Now that California has adopted a law effective mid-year that only hands-free devices can be used while driving, what is Apple offering in the way of hands-free dialing and access (other than a plug stuck in the ear)? Or are we out of luck here?

    mikesobay wrote:
    Now that California has adopted a law effective mid-year that only hands-free devices can be used while driving, what is Apple offering in the way of hands-free dialing and access (other than a plug stuck in the ear)? Or are we out of luck here?
    It already comes with one: the earphones have a mic built into the cable. Just use one in your right ear so that you can hear external sounds with your left ear.

  • MacBook Pro dropping bluetooth connection with HP Officejet 100

    I've recently started developing problems with my MacBook Pro (OS X 10.7.4) maintaining a bluetooth connection with my HP Officejet 100 Mobile Printer.
    The problem I'm seeing is that when I send something to the printer, everything starts out okay, but then after about 10 seconds, the bluetooth icon in my status bar indicates that it is no longer connected.     The printer pauses for a minute or so and then spits out the half-printed page.
    Anybody else seeing this?   Any suggestions on how to fix?

    I have a similar issue, albeit a different bluetooth printer from yours.
    According to a review on CNET's website, the dropping of bluetooth connections seems to have been introduced in the 10.7.4 update and did not exist in the 10.7.3 version of the Mac OS X Lion software.
    MacBook Pro with Mac OS X 10.7.4 (Lion)
    Canon Selphy ES30 with Canon BU-30 USB bluetooth adaptor

  • Unable to use Internet Connect with my new wireless device

    I just received a new wireless device for my macbook pro. Normally I sign on with Internet Connect, but after setting up the new card, I can only connect using Verizon Manager, which usually doesn't give me good connection, I don't know why.
    I called the Verizon people, they mostly are clueless as to how I was able to sign on using both Internet Connect and Verizon Manager before with my old card. I remember there's a way of setting up manually if you want to use Internet Connect. Problem is, when I went to Systems Preferences and clicked on Network, a pop up prompt saying "your network setting have been changed by another application" keeps popping up even as I keep closing it. ***?!!! How can I get rid of it so I can change network setting manually?
    I just want the option of connecting with Internet Connect with my new wireless device. BTW, when I try connecting with it using my old setting National access/ Broadband access , I get a message saying "the selected communication device does not exist".

    "I just received a new wireless device"
    If not from Verizon, then who? Did it come w/a manual? If not, have you contacted the vendor/manufacturer for instructions?
    ==========
    "A Fix for "Your network preferences have been changed by another application" Error
    In the Library/Preferences/SystemConfiguration/ folder delete the following:
    com.apple.airport.preferences.plist
    NetworkInterfaces.plist
    preferences.plist
    com.apple.nat.plist
    You will have to re-configure all your network settings since deleting"
    !http://i50.tinypic.com/izvwo1.gif!

Maybe you are looking for