Bluetooth connectivity and beeping during calls after lollipop update

After this update I have had problems with the bluetooth audio cutting out.  Also during calls a strange beeping sound can be heard every minute.  Is anyone else having this issue?

Couple of other ideas looking around on the web, try hardwired headphones and see if the problem does indeed go away (narrows it down to bluetooth only), if you are playing back from sd card try moving to phone to see if that solves it (some people have seen similar issues with failing micro sd cards).  You aren't by chance getting notifications when the drop outs happen?  It could be muting the audio to playback notification but not playing back the notification (just a thought). Try different apps for playback assuming you are listening to music.
BTW how do you like the Gear circle (other than the cutout issue)?

Similar Messages

  • I can not see incoming calls after LOLLIPOP update

    Hi. When i get a call i cannot see screen, who is calling. It is necessary when phone is locked. Colud you help me?

    You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Bluetooth or Android Wear is flaky after lollipop update

    I updated to Lollipop yesterday and have since had a consistent disconnection issue between my phone and my android watch.  Every 2 or 3 minutes, I'll get the "Have you left your phone?" buzz on my watch and I'll look down and see it's disconnected.
    I started off by restarting both devices, which didn't do anything
    I then completely reset my watch and am still having the problem.
    I've unpaired/re-paired numerous times.
    My phone is a Galaxy Note 4.
    My watch is a Moto 360.
    This is the only Bluetooth device I have, so I don't know whether this is a general Bluetooth issue or something with android wear.
    Any help would be appreciated!

    Couple of other ideas looking around on the web, try hardwired headphones and see if the problem does indeed go away (narrows it down to bluetooth only), if you are playing back from sd card try moving to phone to see if that solves it (some people have seen similar issues with failing micro sd cards).  You aren't by chance getting notifications when the drop outs happen?  It could be muting the audio to playback notification but not playing back the notification (just a thought). Try different apps for playback assuming you are listening to music.
    BTW how do you like the Gear circle (other than the cutout issue)?

  • No sound on voice calls after Lollipop update

    I recently upgraded my Xperia T2 Ultra to Lollipop.  Since then, when I call anyone, or they call me I have no sound coming from the built-in earpiece speaker.  I have the volume all the way up, but nothing.  If I change it to speakerphone mode I can hear the other party, but I do not want to have to use speakerphone all the time.  Has anyone else encountered this problem?  Found any solutions?

     Reinstall lollipop with PCC  PC Companion (PCC)  Bridge (for Mac)   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355 

  • Prerequisites: Bluetooth connections and how to install drivers or update and activate for this

    Hi, Im trying to activate bluetooth in Blackberry Desktop Software can anyone assist how to activate this or get software?
    Im using model 9810
    Kind regards
    Karl

    slimgudd wrote:
    Hi, Im trying to activate bluetooth in Blackberry Desktop Software can anyone assist how to activate this or get software?
    Im using model 9810
    Kind regards
    Karl
    Im not sure if I get the question. Can you please elaborate. Do you mean you want to connect your 9810 to BlackBerry Desktop Manager using Blueooth?
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • Pearl 8110 shuts down and reloads during calls

    Hi
    I bought a blackberry 8110 from ebay, everything with the phone looks ok but it cuts off and reloads during calls. I updated the software from version 4.2 to 4.5, but the problem wasn't solved.  Now I'm thinking its the battery but I need your opinion before I buy another battery.
     Thank you

    Hi mlu-sean,
    Welcome to BlackBerry Support Community Forums.
    Try backing up your device via the BlackBerry Desktop Software and performing a clean reload of your device software. http://bbry.lv/bpv7DT
    Make sure to test for the issue before restoring any data from your backup file.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • I cant hear Voice during call after i upgrade 7.1 i use iPhone 4

    I cant hear Voice during call after i upgrade 7.1 i use iPhone 4

    Hey there Goesdhar,
    It sounds like you are not getting sounds from your receiver on your phone. I recommend the troubleshooting from the followint article named:
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Increase the volume during the call.
    Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
    Make sure nothing is plugged into the headphone jack or the dock connector.
    Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
    Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
    If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
    Restart the iPhone.
    Make sure your device is up to date.
    If the issue is not resolved after restoring the iPhone software, contact Apple Support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • When booting up, the bluetooth connects and then disconnects with my trackpad 3 or 4 times then i get a gray cover over the desktop that drops from top to bottom then a window that tells me to use the power button to do a forced shutdown.

    when booting up, the bluetooth connects and disconnects with my trackpad 3 to 4 times and then i get a gray sheet that drops down from the top to bottom of the desktop then a box in the center that tells me to use the power button to do a forced shutdown. wireless keyboard connects with no problem. went to the apple store and they replaced the bluetooth card. still have the same problem. removed the batteries from the trackpad, strted up and no problem connecting with wireless mouse and keyboard. anyone else experience this?

    This could be a software/state problem or a hardware problem.  Here are steps to resolve the former.
    http://support.apple.com/kb/TS2570
    https://discussions.apple.com/docs/DOC-5282

  • My phone constantly turns it self on and off, it won't let my messages load I carnt text or receive and texts or calls, I have updated the new iso7, can anyone help?

    My phone constantly turns it self on and off, it won't let my messages load I carnt text or receive and texts or calls, I have updated the new iso7, can anyone help?

    Hello Bricky2013,
    The following article has some useful tips that can help stabilize your iPhone.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.

    Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.Extreme and Irritating hang problem occurs after I have updated T2 Ultra Dual Phone with Lollipop Version.Kindly assist and also if Boot the device will it be solved via flashboot and unlock the bootloader?? Waiting for revert.Kindly revert.

    Flashmode or Fastboot mode is only for those that wish to root and install a custom Rom or firmware, if that's what you want to do then head over to XDA - Howwever have you tried a system repair as this usualy fixes issues after an upgrade.
    Performing a system repair using PC Companion will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

  • Moto X 2nd 2014 error after lollipop update

    I've got moto x xt1096, and faced with terrible bug after update to 5.0.
    Time to time on day faced with crash and restart of stock launcher with error "unfortunatelly google search (or app) has stopped"
    I made a topic on motorola forum, but didn't find solution as yet. (tried to make FDR, safe mode, clean cache/data etc.)
    Error after lollipop update . All Discussions (996) . MOTO X™ 2nd Gen . Forum . Motorola Owners' Forum
    does anyone faced with that issue too?
    And maybe someone know any date about 5.0.2 or other update for xt1096, maybe in next update it will be fixed?

    Looks like it's been released:
    Android 5.0 Lollipop Now Rolling out to the Verizon Moto X 2014 | Androidheadlines.com

  • Sony walkman player bug after lollipop update

    Sony walkman player has bug  when listen to song via headphone bass goes off and sound become very loud and worse...sony should look after this issue. 

    Walkman is my favorite music player app. I never install any other app to play music. Unfortunatly, this app isn't working properly after Lollipop update. I'm experiencing the following issues: 1. Sometimes volume up/ down doesn't work2. Equalizer and other sound effect don't work3. Sometimes, it play music without any bass4. For 1/ 2 mp3 file the above mentioned issues are permanent. When I face any of these issues, I restart the app/ reinsert my headphone. Sometimes, the problem is solved and sometimes not. Do you have any explanation sbout the issues? Please don't ask me to repair Lollipop. I have already done it. Should I try kitkat again?

  • ITunes won't start and asks to reinstall after iTunes10 update.

    iTunes won't start and asks to reinstall after iTunes10 update. I have tries reinstalling, but it comes up with it again. I have uninstalled every Apple program and reinstalled them but still the same.

    What's the precise text of your message, Callum? There's a few different ones I can think of that mention reinstalling iTunes.

  • Lightroom says "Develop module is disabled. Please renew your membership to reactivate the D m." I updated Lightroom this week and have used it after the update. I also have a paid subscription until november.  What's  up?

    Lightroom says "Develop module is disabled. Please renew your membership to reactivate the D m." I updated Lightroom this week and have used it after the update. I also have a paid subscription until november. What's up?

    Online Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • Blur,noisy,too bright pictures after lollipop update

    After lollipop update pictures with superior auto mode or manual mode comes very blurry.I'm not using phone case.With flash or without,pictures comes too grainy.Anyone else have problem with camera?
    Please give me solution

    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for

  • How to add drive space from one drive to another drive in Solaris 10

    This is something I have never done in Solaris. I have a mounted drive (UFS) with a dir being used for a samba share. The dir is near full. I have another drive right beside it that is empty. 1. How can I add the drive space from the empty drive to t

  • Win 8.1 drivers

    Hello! I was wondering if a magic HP angel would like to tell me what drivers I can download for these two Base system devices? I am working on an HP Probook 4730s running Windows 8.1 Professional. Please let me know if there are any other details I

  • Where can I find a version of iTunes that is compatible with Tiger and access podcasts for me?

    All the auto upgrades are installed - Tiger up to v 10.4.11 - but when I click on podcasts the window opens in a feedback loop to upgrade iTunes via the iTunes Store, where I cannot go anwhere without creating a new id and offering up my credit card

  • Picking Outbound Delivery

    Hi Experts,      I have created Batch Split via BAPI_OUTB_DELIVERY_CHANGE.     Now I have to pick the delivery item quanties and change the Ovrll Pick Status to either 'B' - Partially Picked or 'C' Completely Picked.      I read from the forum that I

  • My macbook's sound won't work - no output devices found in settings?

    I've been having a lot of issues with my Macbook.  It has a 2.4 GHz Intel Core 2 Duo processor and is running on version 10.6.8 Mac OS X.  It asks for certification whenever surfing the web or loading websites, and always redirects to a different pag