Bluetooth connectivity issue with the car hand free

I started having a problem when I updated my software to the latest version. The Bluetooth is keep connecting and disconnecting in an annoying way once I start any music with my mobile Z3 device.

You may need to remove the handset from car's Bluetooth memory, then re-add it. Also, remove the car from the handset's Bluetooth memory, then re-add.

Similar Messages

  • Anyone else having repeated wifi connectivity issues with the OSX version 10.8.5?

    I just updated the software on my iMac to OS X version 10.8.5. Now I am having repeated connectivity issues with the wifi in my house. This is the only device that is having these issues. My phone, ipad and tv are not having any problems at all.
    It happened immediately following the update. I was sending emails and browsing before the update without a problem.
    from apple:

    I had a message like that last week - only it asked what browser I would be using - I just quit safari - purges caches etc - and at that time noticed I was getting RSS feeds through PUBSUB - tracking them down to the top sites view I never use - I deleted all of the top sites (most of which I don't go into so it must have been a preset) that included MSN and Google - I don't use google so that was pointless.  (deleting a top site means you are blocking it from that page)    Have not had the message since so it must have had something to do with top sites activity.
    Just a note:  Did see somewhere probably BBC tech - that Google was going to stop supporting older web browsers.

  • Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

    My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
    The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
    I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
    Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

    Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
    I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all.  You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

  • Just updated my iPhone 4S to ISO6 and now the phone will not pair with my car(Lexus ) is this an issue with the car firmware or iOS 6?

    Just updated my 4s to iSo 6 and now the phone does to pair with my Lexus anyone have/solve this issue? Is it a firmware problem with the car?

    Was it pairing before the iOS update?
    If so, delete the pairings in the device and the car, then try again.
    If it was not, the issue is most likely the car.

  • Network connectivity issues with the iphone 5

    has anyone had issues with the iphone 5 in terms of network connectivity

    yep loads of postings if its re the wifi issue

  • Bluetooth connection issue with car stereo

    Hi,
    I have a N8-00, with the current belle software on it.
    With my car Bluetooth it will connect and function properly when I first add the device (N8) to the car Bluetooth, but if I turn the ignition off and then back on again it won't pair, if I try to manually do it, it just comes up with error without a code.
    Deleting the device and trying to re-pair it wont work unless I restart my phone, and I am unable to turn Bluetooth off on my phone until after restarting it.
    This is getting very frustrating. 
    Please help!!

    Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
    I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all.  You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

  • Car Bluetooth Connectivity Issue with iPhone 6

    Just got the iPhone 6 on Friday -- very exciting! But I can't get the phone to connect to my Mini Countryman's bluetooth. The phone will detect the car's bluetooth signal, and says it's connected, but calls aren't audible via the car stereo system, but rather the phone itself. And if I don't turn the bluetooth off, my car thinks I'm on a call and the radio won't work.
    It's frustrating because this feature use to work with my 5s. A friend of mine is having the same issue in his car. And I've seen others complain about this -- seems like an Apple issue. Not sure though.

    I did what ever everyone suggested, reset all setting, reset network setting, deleting from car memory.   It's works fine after you reset it and reconnect to the car with fresh new connection at first, but after I power the phone off and turn it back on, boom the problem comes back.  It's got to be a IOS 8 issue.  I did this 3 times and I am getting sick and tired of it so I am going to restore and set up as a new iPhone from Itune and wait and see how Apple is going to fix this issue.
    I have 3 cars and the Bluetooth is having the same issue on all of them, work first then no more even with the suggest tricks.  I hate my iPhone 6 now.
    2011 Lexus ES
    2011 Subaru STI
    2012 Mercedes E350
    Oh I forget to mention, My wife's iPhone 5 with IOS 8 have no issue at all with all 3 of the car. Only my iPhone 6.
    Oh I forget to mention, My wife's iPhone 5 with IOS 8 have no issue at all with all 3 of the car. Only my iPhone 6.

  • Why won't my bluetooth connection work with the new sofware when it comes to my ITunes?

    After I installed the software, my phone will connect to the bluetooth (so the phone and such work and the music) but I can no longer control my music from the radio and see the song that is up (scroll on screen). I have checked all the settings, but they are good. So it has to be the software.

    There is an alternative downloader for 64-bit editions of Windows here:
    iTunes 12.1 for Windows (64-bit — for older video cards)
    that seems to address the most of the playback issues - including problems with Bluetooth devices - that some users have been reporting with the full 64-bit version (the alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer).  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
    Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8).
    Another possible remedy relates to a potential clash between the 64-bit version of iTunes 12 and Google Chrome; some users have reported that uninstalling Chrome (not just not having it running) resolves the iTunes playback issues without having to install the alternative version referred to above.
    Finally, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

  • Anyone noted Bluetooth connection issues with iPhone 4s and Ford sync?

    My wifes iPhone 4 with IOS 5.0.1 auto connects to Ford Sync at least 75% of the time on first attempt. My new iPhone 4S with IOS 5.0.1 takes 4-5 attempts and rarely if ever connects without multiple attempts. Any one else seeing issues with failed Bluetooth connections with iPhone 4S phones?

    Look at the right panel for links to other threads concerning problems with Fords. And it's not just Fords, cars in general.  No solutions seem to be given.

  • Does ios6 resolve iphone4s Bluetooth connectivity problems with Clarion car stereos?

    Clarion cx609 and iPhone 4s don not seem to be compatible.  It pairs momentarily and the disconnects, or will not auto connect after car is turned off and restarted.  Is this an A2DP issue with IP4s?  So frustrated, this seems like a simple thing.  Supposed to be plug and play right?
    Any help would be great.

    I have a similar issue and Apple is completely ignoring it. 
    https://discussions.apple.com/thread/4366730

  • Having a connection issue with the WRT54GS Wireless Router

    We just recently got Broadband internet. We had issues with it at first, because the Ethernet cable included wasn't working properly, and instead, the guy got us connected via USB cable. Now, I just bought this Router yesterday, and made the mistake of unplugging the USB and plugging in the extra cable. I did everything as instructed in the Easylink Advisor program. My connection was messed up, and I could not connect at all. After calling Tech support, they reset our modem and everything (cable modem and internet-wise) is as good as new. I went out and bought a new Ethernet cable, so now I have 2 perfectly new cables, and left the USB cable plugged in, so I don't throw it off as I did yesterday. I still can't get the Port 1 light to come on. the WLAN light is on, as well as the Internet light, but no Port lights will turn on. Anyone have any ideas? Thanks in advance! -Chris-

    Are you getting online via ethernet with the modem now? Make sure your local area network is enabled. Go to control panel then network connections.
    Message Edited by Pio04 on 07-11-2007 11:47 AM

  • Battery condition with in car hands free

    My iPod touch 2nd Gen has spent most of its life plugged into my Parrot hands free kit in my car, now Ive disconnected it, it seems the battery only lasts a few hours.
    Does anyone know if the iPod will automatically bypass the battery when fully charged, ie, keeping the battery in peak condition.

    For maximum battery life Apple recommends:
    "Use iPod Regularly
    For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Be sure to go through at least one charge cycle per month. If you use your iPod infrequently (gasp), you might want to add a reminder to your calendar program."
    Thus, it appears you have not done that and thus the battery life would be shortened. I conclude that what you see is not unexpected.
    Apple iPod Battery article:
    http://www.apple.com/batteries/ipods.html

  • My iphone has bluetooth connecting issue with my honda crv since upgrading to ios 7.1.2

    EVer since i downloaded ios 7.1.2 the bluetooth in my crv keeps sisconnecting and connecting. We took it to a fenius and dud a reinstall. It worked for aday andbow itdoing the same thing. Never had this problem before

    What troubleshooting steps have you tried to fix it?. The articles below can provide some step you can try.
    iOS: Troubleshooting Bluetooth connections
    iOS: Third-party Bluetooth accessories

  • BMW bluetooth connection problems with the iphone 4s

    My 2010 BMW 528 and iphone 4s are not working properly together. About half my outgoing calls from the car leave the recipient unable to hear my voice. Consequently they hang up. If I call them back a second time they usually hear me just fine. The pairing generally seems solid. I receive calls normally and both parties hear each other on all incoming calls. It's just the outbound calls that dont work reliably. Apple is trouble shooting (e.g., a iOS5 reinstall is pending) but I'm not sure (nor are they) that this will fix it. Some thought that there may be a basic imcompatibility between the two devices. Many report that the 3g and 4 models pair and work fine with BMW's. Any thoughts/suggestions? 

    I have the same problem in 2010 BMW 528i and iPhone 4S. I reduced how often this happens by turning off syncing of contact on the iphone. But it still happens daily. The audio is not diverted from the phone to the car.
    Really, really hoping that this gets fixed with iOS 5 update soon.

  • Connection Issue with the DR Server

    While trying to create a session to my DR server, I am getting following error -
    SQL> conn sys as sysdba
    Enter password:
    Could not load program oracleEPPRD01:
    Symbol resolution failed for /usr/lib/libc.a[aio_64.o] because:
    Symbol kaio_rdwr64 (number 1) is not exported from dependent
    module /unix.
    Symbol listio64 (number 2) is not exported from dependent
    module /unix.
    Symbol acancel64 (number 3) is not exported from dependent
    module /unix.
    Symbol iosuspend64 (number 4) is not exported from dependent
    module /unix.
    Symbol aio_nwait (number 5) is not exported from dependent
    module /unix.
    Symbol aio_nwait64 (number 6) is not exported from dependent
    module /unix.
    Symbol aio_nwait_timeout (number 7) is not exported from dependent
    module /unix.
    Symbol aio_nwait_timeout64 (number 8) is not exported from dependent
    module /unix.
    System error: Error 0
    Examine .loader section symbols with the 'dump -Tv' command.
    ERROR:
    ORA-12547: TNS:lost contact
    Where can be the problem?

    Is it possible you don't have AIO configured or enabled? Did you run rootpre.sh at installation time? See the installation guide for the prerequisites for Oracle server on AIX.
    Werner
    Not exactly your error stack (and even not Oracle), but it sounds similar:
    http://www-01.ibm.com/support/docview.wss?rs=634&context=SSGU5D&dc=DB560&dc=DB520&uid=swg21253974&loc=en_US&cs=UTF-&lang=en&rss=ct634db2
    Edited by: oradba on 22.04.2010 17:37

Maybe you are looking for