Bluetooth connects fine to Car but no sound.

Hi,
I had that BB pearl 8220 for a while now. Bluetooth worked fine in my car for about 6months. (Since I have the phone I guess...)
But now for some reason I can't hear/can't be heard when using it.
The radio works fine, I have tested it with another phone so its not the issue.
The phone is paired fine, I can make/receive calls but like I said, no sound on either end.
Pulling out the battery did not help, I have checked the volume when in a call, it is at max and not muted.
I tired unpair/paring again... No joy.
I pretty much checked every setting I could think of and for once... google did not help.
I am puzzled as it worked fine for a long time, I would test it with another bluetooth device but I don't have one and I doubt it would work either since the radio is just fine...
I don't really want to try a full wipe but I will if no one here can help me.
Anyone has any idea what the problem could be?
Thanks,
InFlames

Ive experienced exactly the same issue with an 8900 pearl. The handsfree bluetooth connection has worked fine in my Nissan Navara, but just bought a new vehicle and had a Clarion nx509e stereo, sat nav unit installed. The blackberry connects to it with no problem, when receiving a call the stereo cuts the music and shows 'telephone interrupt' but with no sound.
No-one has been able to help other than say that Blackberrys are troublesome.
What next?

Similar Messages

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

Hi,
Normally yes, Bluetooth can connect to multiple devices at the same time, so yes.
The only thing is that you'll be able to send sound/music to only one at a time, but I understand the Garmin HUD doesn't play sounds.
cheers

Iphone 3GS with bluetooth connection with Audi car kit

I connected my iphone 3GS to my Audi car system through bluetooth connection. The Audi system recognizes the iphone and his address phone and all works well.
The issue comes when I disconnect the iphone from the car kit. After, even someone calls me, the call ringtone rings only two times and after switches off during the incoming call. This issue is random, sometimes the alarm rings well, sometimes not by working in the way described above. Someone has the same issue and knows how solve it? Is an issue linked to hw or only sw?
thanks
Message was edited by: IGK

Hi.,
Can I check with you if you have this problem..
I assume you have paired the iPhone 3GS to the Audi carkit.
First, play something on the iPod.
Then go to the Bluetooth settings page where you can see all the paired devices.
after that, make a connection to the carkit.
Is there any stuttering or audio breaking you hear from the carkit?
I have this problem with my iTech BluebandR headset and iSkin Cerulean RX. I only found this problem with iPhone 3GS but it worked fine with 3G.

Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all. You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

I am having issues with my iphone6 bluetooth connection in my car. When going to settings under bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution yet?

I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class. When going to settings under Bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution from Apple yet?

Hi susan from WSL,
Welcome to the Apple Support Communities!
I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article.
If you can’t use a Bluetooth accessory or car kit
Cheers,
Joe

I'm already connected to the tv but no sound?????

I got the adapter and the s-video cord so the tv is hooked up to the macbook and i get a good connection but the sound still comes out of my macbook and not my tv... How do i get the sound to come out of my tv instead?

You need one of the following for audio depending on the audio in for your TV. Most have the RCA jacks.
3.5mm patch cable
3.5mm to RCA Stereo Cable

Iphone6 bluetooth connectivity with lexus car 2014 gs350

im having bluetooth connectivity issues with my lexus 2014 gs350 ,the pandora app loses connectivity

Hey jjjjalter,
Thanks for the question. I understand that you are experiencing issues with the bluetooth stereo connection to your vehicle. The following resources may provide a solution:
If you can’t use a Bluetooth accessory or car kit
http://support.apple.com/kb/ht6473
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
Thanks,
Matt M.

N86 & bluetooth connection to Audi Car

I can successfully connect n86 to car and use phone to talk etc. However, when n86 connected to car bluetooth, I loose nokia maps voice instructions. Is there a way to have phone connected to car and be able to hear maps navigational voice through car bluetooth as well?

I have a 2006 A8 and had similar problems until I loaded the last iPhone update; Bluetooth is now rock-solid. Check with your dealer and make sure your car has the latest Audi updates. On my car, Bluetooth settings have a delay setting. Make sure that is turned on.

Sound is fine with WinMediaPlayer, but no sound using RealPla

I just installed SBAudioPCI and the card works gangbusters with Windows Media Player, but can't get a peep out of Real Player. I have checked all the volume levels and mute boxes and that is not the problem. The RealPlayer lists all the songs of the CD I am attempting to play and slider shows that it is "playing" but no sound! I did a search and didn't find anything on this! Help!
Leif

Please take another look at my post! Thanks...

Bluetooth connection with my car OK but receving time asking hand set. it should go direct bluetooth

I am using bluetooth in car and call incoming time it is asking to connect bluetooth. It should automatic goes to bluetooth and if don't want that time i can slect to heandset.

Fortunately, my S3 has no problems pairing, connecting and reconnectiong with my Acura MDX (06) Handsfree Link and a Dual BT aftermarket unit I installed on the other car. Also, both my cars have generic OBDII BT adapters adn the Phone connects simultaneously to both the audio, hands-free and the OBDII (via Torque) without any issues or hiccups.
WiFi and Cell signal are another story - where other devices have no problems connecting, the S3 struggles to maintain WiFi and Cell signal. Hopefully, they will fix that with a software update.

6730c Bluetooth connection to SAAB Car bluetooth

Hi, I've just got a 6730c, which I've tried connecting to the SAAB hands free car kit via Bluetooth. My old Nokia works fine, but the 6730 appears to connect, but disconnects again within seconds. I've tried several times, clearing the connections on both the car and the phone. but the result is always the same, yet the older Nokia connects first time and works well.
Am I missing something obvious?, surely it should easier than this!.

In case anyone is interested, I've managed tofix the problem.SAAB have an upgrade which when loaded has resolved the problem. I managed to get under warranty, but apparently its £50+otherwise.
I would like to thank Nokia technical support, who I emailed. The only response was the automated email promising contact within 48 hours, obviously must be in a different time zone to me, thanks guys!

Bluetooth connection issue with car stereo

Hi,
I have a N8-00, with the current belle software on it.
With my car Bluetooth it will connect and function properly when I first add the device (N8) to the car Bluetooth, but if I turn the ignition off and then back on again it won't pair, if I try to manually do it, it just comes up with error without a code.
Deleting the device and trying to re-pair it wont work unless I restart my phone, and I am unable to turn Bluetooth off on my phone until after restarting it.
This is getting very frustrating.
Please help!!

Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all. You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

Help Please...I want to use my i pod in my car but poor sound quality

I have a vid 80gb ipod... i got it so i could load my entire cd collection on it. because all my cds are so bulky.
My issue is when i import... then sync the ipod... take it to my car the quality of it playing thru my 12'' subwoofers is horrible. I have a alpine in dash dvd player and 2 12'' subs with amp. (the i pod is connect via a cord direct from the head unit.)
I can play the same song at volune #15 on the ipod and directly from the cd and the sound is not even comparable. The ipod barly makes the subs move but when played thru the cd they move quite a bit. Even on same volume and song?
Any help how i can eliminate that and get the same sounds quality with the ipod as the cd?? please help im getting pretty frustrated.

I tried changing the format and it still didnt seem to be any better. are one of those formats better than the other? because i still had to turn the volume up to get any reaction from the speakers (bass).

Bluetooth connection with my car SKODA octavia problems

Hi,Please this connection probelm makes me crazy.I purchased a SONY XPERIA Z3 D 6553 and tried several time to connect via bluetooth to the SKODA Octavia multimedia of my car .Unfortunately I cant because when the connection started to establish it appearas the icon of THROW altougth it's disabled.The coonections is established and inmediatley is disconnceted.Please your help to solve it.thanksJorge

Hi had a same problem, after upgrading to 5.0.2 on my D6633 with my Honda. I have reset the phone and as well deleted all other devices I use at home (MAP-S1, SRS-X9) plus uninstalled SongPal application that controls them and all working now. This THROW function is usless only cosing problems

Bluetooth connects fine to Car but no sound.

Similar Messages

Maybe you are looking for