Bluetooth device browsing with a Cingular 8125 PDA phone

Hi,
I'm hoping someone can help me with this, as it's the first time I've tried to Bluetooth a PDA phone with my iMac. All I want to do is use the Bluetooth File Exchange to get some pictures off the phone and onto my computer. I've never had problems with this with my old SLVR, but now the computer does not seem to want to get the files from the new phone. Is it because the PDA is running Windows Mobile or something? Does anyone have any other recommendations?
Thanks!

Hi all, same problem here.
As Talez describes in this post:
http://discussions.apple.com/thread.jspa?messageID=5723469
I have the same problem.
Mar 2 14:22:06 macbook-di-shaice kernel[0]: IOBluetoothDevice::moreIncomingData non CONTINUATION ACL packet received when expecting one 202e -> flags 02
Mar 2 14:22:06 macbook-di-shaice kernel[0]: IOBluetoothDevice::moreIncomingData non FIRST ACL packet received when expecting one 102e -> flags 01
Mar 2 14:22:06 macbook-di-shaice pppd[427]: Modem hangup
But this happens (as you can read above) ALSO when I use my WM6.0 phone as bluetooth modem (an HTC P3600 with Windows Mobile DUN enabled).
At the moment I am not at home, but I think that the only solution is to retrieve Bluetooth Kext from Tiger and put them in Leopard and hope that all goes smoothly as before.
I'm totally disappointed because this is a BIG problem for every one out there that needs to work on the road.
I hope that this post will be effectly posted (I'm writing from my macbook using this crappy PAN Bluetooth connection)
Best regards,
s

Similar Messages

  • Can i use two bluetooth devices simultaneously with iphone 4s? Specifically,a bluetooth headset, as well as a new low energy bluetooth heart monitor?

    Can I use two bluetooth devices simultaneously with iphone 4s? Specifically a bluetooth headset as well as a new low-energy smart bluetooth heart monitor?

    I don't believe so.

  • What bluetooth device works with home stereo

    Is there anyway to connect my Imac to my home stereo via bluetooth or any other methods short of stereo cables.?
    I was hoping that there is a moldule that connects to the home stereo some way ? I have all this music on my computer and no way to play on my home speakers/stereo.
    Brad
    [email protected]

    You can't do it via Bluetooth because the Mac OS doesn't support A2DP yet which is required for streaming stereo audio over a Bluetooth connection.
    If you've got a wireless home network you can use Airport Express:
    http://www.apple.com/airportexpress/

  • Having trouble opening connections and reading from Bluetooth devices.

    Hello,
    As the title states, I am having trouble opening connections and reading data from a Bluetooth device. We are using a PDA to communicate with LabVIEW. First, the Bluetooth Open Connection VI displays a timeout error half of the time. Second, when it does open, it does not read what the PDA is sending. Third, if it does allow an open connection, it will not do it a second time unless the devices are turned off.
    I also have another related question. I am using a Linksys Bluetooth USB adapter, and the driver is proprietary. Labview requires the use of a Microsoft driver, and we are having problems going back and forth between the drivers. What Bluetooth receiver would you suggest using? The reason I ask is the fact that you have Bluetooth examples of client VI's. Therefore, you must use a similar device. Thank you for your time.
    -Jon

    Hi Jon,
    I'm not sure what Bluetooth receivers were used to verify the functionality of the VIs. However, I still want to help you solve your issue. Please make sure that you are running the shipping examples and let me know what version of LabVIEW, what PC OS and what PDA OS you are using. Does the Microsoft driver work for your Bluetooth receiver if you uninstall the Linksys driver?
    With your answers I'll do my best to help you out.
    - Philip Courtois, Thinkbot Solutions

  • HTML set as string open in device browser, not in internal webkit

    I have the stupidest AIR bug here on iOS. HTML set as string to StageWebView now open in the device browser with URL like this http://adobe.13323422.apollo.air/
    It only happens on the device (iPhone's or iPad's), not in the simulator. Anyone?

    I also have this issue. The documentation on LOCATION_CHANGING clearly states:
    http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageWebVie w.html#event:locationChanging
    A locationChanging event is not dispatched when you change the location with the following methods:
    historyBack()
    historyForward()
    loadString()
    loadURL()
    reload()
    That isn't true. I'm also using loadString() and I get a new Safari with the same "adobe.[numbers].apollo.air/ " as a location. This doesn't seem to be an issue with OS5.x but once I updated to OS6 this now happens. This happens on AIR3.4 and AIR3.5.

  • Errant Bluetooth Devices

    I never used Bluetooth on my MacBook Pro; however, when I click the Bluetooth pane in Preferences, there are six mice listed -- all with different MAC addies, not paired, but configured.
    Peripheral (0x5), Mouse (Ox20)
    How did they get there?
    I know how to get rid of them; rather, I'm just curious how they got there.
    shrug

    Hello t:
    It is speculation on my part, but if you have system preferences>bluetooth set as on and discoverable, your MacBook pro was, at some point, in range of those Bluetooth devices. With the settings I mentioned above, the bluetooth setup assistant automatically hunts for Bluetooth devices in range.
    Barry

  • Bluetooth - Devices paired, canoot sync

    Hello,
    I was wondering if someone can help me with syncing through Bluetooth. My laptop is paired with my Blackberry 8300, but i don't see anywhere the option to sync.
    Up until now i have always been connecting the USB cable to sync Outlook with the Blackberry, however it would be nice to just automatically sync as soon as my Blackberry is near my laptop.
    I appreciate the help
    Thank you! 

    Yes. You don't even have to select which one you want to use. Why do you think you can't set up your headset without un-installing the pairing for the car? Just set it up. I have 4 different bluetooth devices paired with mine. My car, a headset I keep at home, a headset I keep at the office, and my wife's car.
    It works just fine.

  • TS3581 Iphone 4 wont discover bluetooth devices ie. my car

    Out of the blue my iphone 4 has stopped connecting with bluetooth devices.  I removed my car builtin bluetooth out of my phone and took my phone out of the car's system.  It was synced to the car's system but just stopped working.  Car is brand new 2013 Ford Explorer & I'm sure it's not the car.  I've tried to add the phone but it just spins and says discoverable but does nothing.  This is why I'm sure it's the phone!  It won't discover any bluetooth device. I have shut off my phone, reset my phone, made sure my phone was charged, deleted things that could be taking up to much memory etc.  My phone software is current @ iOS 6.1.3
    Please help!!!!

    deggie wrote:
     Unless you have a plan with AT&T and are attempting to tether your phone with your laptop, there is no other reason to pair via BT with your laptop.
    thanks for the ignorant statement
    but theres more reasons then that.
    file push. skype audio through computer. phone audio through computer?
    theres atleast 3 reasons your wrong.
    anyone know how to get the iphone to connect to windows through bluetooth?

  • New to FIOS, Can't Browse With Mobile Device

    I recently switched from DSL to FIOS.  I have the Actiontec mi424wr Rev. E router.  Everything has been working well with the exception of my wireless PDA.  It connects to the wireless network ok but I an not able to browse the internet with the device.   It is a Pharos GPS/PDA Phone 600 with Windows Mobile 6.0.  It seems to work with any other WIFI. 
    It seems to me that it must be something with the firewall but I have not been able to figure it out.  Any ideas?
    Thanks in advance
    Stan
    Solved!
    Go to Solution.

    skrol wrote:
    I recently switched from DSL to FIOS.  I have the Actiontec mi424wr Rev. E router.  Everything has been working well with the exception of my wireless PDA.  It connects to the wireless network ok but I an not able to browse the internet with the device.   It is a Pharos GPS/PDA Phone 600 with Windows Mobile 6.0.  It seems to work with any other WIFI. 
    It seems to me that it must be something with the firewall but I have not been able to figure it out.  Any ideas?
    Thanks in advance
    Stan
     Check and see if your PDA will alow you to create a connection where you can enter the SSID and WEP encryption key. Both can be found on the back of your Actiontec router. Your PDA can probably see the SSID from the router, but it needs the key.

  • Trouble with Bluetooth Devices

    I have a MacBook Pro 13" from late-2011.  Recently I have decided to use Bluetooth headsets instead of wired earbuds because I tend to forget they are in my ears and when I get up, they are yanked out of my ears, hurting me and potentially pulling my notebook off of something.  I had an LG Tone before getting my current Motorola S11-FLEX HD headset.  I switched because of the problems I have been having with Bluetooth but switching has not solved the issue.
    My biggest problem with my Bluetooth headsets is that the audio stutters and then de-syncs with any video.  The de-sync can be as bad as a full second.  I'll see the video's actions before I hear them.  The de-sync also affects the responsiveness of controls.  After I give a command, the audio will continue to play for however long the de-sync is before the command is performed.  It's like it's making up for the lost time.  The only solution I have come across is turning off the device, then turning it back on but that only works some of the time.  Usually, I have to turn it off and then on again two or three times before the de-syncing issue disappears.  I have no idea the cause as my LG Tone works to specifications with devices that belong to other people.  I have found that moving my head in a certain direction will cause the de-sync.  Sometimes, it's leaning back; other times, it's tilting my head.  It's as if the Bluetooth field is planar and I'm jumping out of the plane.
    Another issue is the distance I can be from my device.  My Bluetooth headsets boasts being able to function perfectly as far as 30 feet for one headset but moving even 5 feet will cause the previously mentioned de-syncing if the audio is playing.  If I pause the audio, I can move about 10 feet.  After I move 10 feet, when I press play, the de-sync appears.  It renders the function of being wireless to being useless.  I wanted to Bluetooth so I didn't have to pause, take off my device, do what I need to do, and before coming back, putting on the device, and resuming play, hoping that nothing has gone wrong to cause a de-syncing issue.
    A third issue I have is that sometimes, while listening to some audio of some kind, another program will make a noise causing the audio to cut out.  My notebook or the web browser is not aware that audio is no longer playing.  It's as if the new program has muted the original audio.  The only cure: turning off the device and turning it on again and hoping it's working.
    The last issue I can think of is that when I turn my notebook off for any reason, all Bluetooth devices are forgotten causing me to go through the hassle of repairing the devices again but many times, the repairing process fails and despite being on and not paired to anything else, my notebook is unable to pair unless I turn both the device off and my notebook's Bluetooth off before turning both back on.
    Has anyone run into issues like this? If so, does anyone have any recommendations on how to correct the problem? The problem is on my notebook side as the devices work fine with other products.  The LG Tone could be used across the house when it was attached to my father's Kindle Fire and when attached to my iPhone 5, I could walk 20 feet with doors and concrete between me and the device before any issues began (both devices had trouble with my iPhone but pausing usually fixes the issue so I don't care).  Please, I need some advice and help.

    Some details missing.
    I have a Pioneer DEH-P7000BT. On telephone settings, everything OK.
    When I want to sync to my Audio Bluetooth, I hear the sound in slow motion :-)
    I have to delete the Bluetooth device on the radio, and re-syncing on Audio Devices and everything fine.
    Same thing all the time.
    When I had iOS 3.1.3 on my iPhone 3G, everything was OK.
    I can't find Firmware Update for my radio.

  • I purchased a Holux M-1200E Bluetooth GPS Data Logger.  The device paired with my laptop just fine so I know it is working right.  The device will not even show up on my iphone or ipad to pair via bluetooth.  Is there a way to pair without jailbreaking???

    I purchased a Holux M-1200E Bluetooth GPS Data Logger.  The device paired with my laptop just fine so I know it is working right.  The device will not even show up on my iphone or ipad to pair via bluetooth.  Is there a way to pair without jailbreaking???  I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!!  Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized???  I love my apple devices, but this is very frustrating.  I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!!  I am hoping apple will help me!!!
    Thanks,
    Melissa

    melissafromlenexa wrote:
    That is not the right device, it is the
    Holux
    M-1200E Bluetooth GPS Logger
    I looked at the same sight for that and it does not say that.  This is the first time I have posted a question, you don't have to be mean about it.  I am trying to get this to work for a good cause. 
    It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that.

  • I could not pair my bluetooth device with my ipad mini retina display. Is there anyone facing the same problem?

    I could not pair my bluetooth device with my ipad mini retina display.
    My ipad could not detect the bluetooth device. I do not facing this problem with my iphone and my older ipad on the same bluetooth device.Is there anyone facing the same problem?

    Yes I tried pairing with my bluetooth car hands-free set - Not discoverable.
    I tried to pair with my bluetooth headset - Also not discoverable.
    I have no problem with my other apple products my older ipad2 and my current iphone5.
    Just this ipad mini retina display could not discover the above bluetooth device.
    Any idea on how to solve this? Thnaks.

  • How can i use iobd2 with bluetooth device obd2

    Hi,
    I want to connect an obd2 bluetooth device with my iphone 4S/ipad 3 via bluetooth. My Apple device can't find the bluetooth device. What can I do to solve this Problem? I don't want to buy an android tablet or phone.

    Better a year late than never... There is an answer on Re: I want to connect a obd2 bluetooth device. Do i have to buy an android?

  • Can I use more than one bluetooth device at a time with my iphone4

    Can I use more than one bluetooth device at a time with my iphone4

    Anthony
    I have a Plantronics 975 earpiece that works very well with my Razr.  I
    just got a Panasonic KX-TG7873S phone system for my home, it has a
    "Link-to-Cell" cellular convergence solution, from what I understand it is
    just Bluetooth enabled.  I have paired both device with my Razr.  In
    settings, Bluetooth setting, both device show.  But only one device can
    connect at a time.  If my Plantronics is connected and I choose the
    Panasonic device, the Plantronics device disconnects and the Panasonic
    device then says it is connected.  Both devices work when they
    are connected.  Is it because they are both "headsets"?
    So, to have to remember to connect to one or the other device, depending on
    weather I am coming or going is not practical.
    On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

  • I'm not able to pair my iPad with my Logitech mini-Boombox. I was able to do this on my original iPad. I was having a problem on an unrelated matter, and the Apple store replaced it with a new device. Previously, all Bluetooth devices worked fine;

    I'm not able to pair my iPad via Bluetooth with my Logitech mini-Boombox. I recently brought my iPad to the Apple Store for an unrelated problem, and they replaced it with a new device. The old device had no problem pairing with any of my Bluetooth devices. I'm only haveing the problem with my new device. I was able to pair it with my Apple wireless keyboard, but not the mini-Boombox. I think I've done everything that I've read in other forum posts: I've toggled the Bluetooth setting on and off; I've reset the iPad a couple times; I've turned off and on the mini-Boombox; I've recharged the mini-Boombox. What am I missing here, and how can I fix this?

    Hi ecb1999,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers,
    - Judy

Maybe you are looking for