Bluetooth device is not working in labview

i worked with simple bluetooth server.vi example program. i attached one screen shot of that vi.my problem is, i plugged my usb bluetooth device and i run this vi, but the 'create listener' function generates error 59. 'bluetooth discover' function does not returning me any nearby devices. The device is detected in device manager and it is working properly in other softwares. The problem is in labview only. i use windows XP sp2, labview 8.2.1 full development version. kindly anyone help me to fix this problem.
Attachments:
bt.JPG ‏127 KB

i already searched for solutions but there is no exact solution found for my problem. first i want to get my own device's name and address, it is not giving those details. i attached that vi's screenshot. tell me why this happens.
Attachments:
discover.JPG ‏73 KB

Similar Messages

  • Bluetooth devices are not working properly since ios 7 update...

    Since I updated to ios 7, my Bluetooth devices are only partially compatible with my iphone.  The devices will allow me to use the phone and all audio/video playback.  However, I have lost the ability to do simpe tasks such as forward/reverse tracks with my devices.  This loss of functionality is consistent across both Bluetooth Speakers (Monster Clarity HD) and in my vehicle (Lincoln MKX.)
    Any suggestions?
    Thanks!

    This problem can be both hardware or software related. To elimnate the option of it being hardware related, I would make a Genius Bar appointment at your nearest Apple Store and have them check it out. They will be able to rule out the hardware issue. There are a couple of ways to try and fix hardware issues: 1) hard reset or 2) device restore. I've have linked articles with instructions to both for your reference.

  • Bluetooth device is not working

    Labview Lovers,
                                We have two laptops (hp model compaq nx6120) which has inbuild bluetooth facility of hp integrated module with bluetooth wireless technology. So what we actually want is transferring/communication between these two PC's via bluetooth technology. For that in my first step I executed our basic program bluetooth disoverer to find the name address, but it gives out an error message of
    Error 58 occured at bluetooth create listener in Advanced Bluetooth server.vi
    Possible Reason:
    Labview: The network function is not supported by the system.
    Does I have to do any other settings to go ahead for this.  Can anybody please help us to achieve the communication through the bluetooth technology with these laptops. All suggestions/tips are welcomed.
    Shiv

    Hi Shiv,
    Thank you for contacting National Instruments.  From the information you have provided here, it sounds like Conseils has you on the right track.  I would like to point out some helpful resources that I found when looking into this issue.  The can be found from within ni.com/support in our KnowledgeBases.
    Requirements for Using Bluetooth with LabVIEW
    Developing Bluetooth Applications with LabVIEW
    I think this is the information you will need to get this application working.  Hopefully, you will find them helpful!  Let me know if there is anything else I can help with or clarify for you.  Have a great day!
    Jason W.
    National Instruments
    Applications Engineer

  • Bluetooth device is not detected during installation of bluetooth driver

    Hi , Initialy bluetooth was working properly, Few day ago I saw that there was no bluetooth icon in system trayas well as in list device manager. So I uninstalled the driver and try to install. But during installation it showthat bluetooth device in not detected and it exit. 

    Downloads the Windows 7 Hotkey Features. This will enable the wireless console with Fn+F5. Then you can enable bluetooth from there. Windows's built-in bluetooth drivers should work fine, maybe even with an update from WU if you're lucky.
    -tm
    Edit: Don't forget to download the System Interface Driver too.

  • [LAVA Cross Post] CTRL+SHIFT+ Shortcuts sometimes not working in LabVIEW

    Cross-post from LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/
    See the above post for more information - here's a synopsis:
    CTRL+SHIFT modifiers are not working while running LabVIEW in a Parallels 7 virtual machine. This problem affects both LV2011 and LV2012. I'm not certain that this is a LabVIEW bug - could be an issue with my virtual machine environment or it's configuration - except that CTRL+SHIFT modifiers work in other applications on the affected VMs. It's just LabVIEW that appears to ignore shortcuts with the CTRL+SHIFT modifiers.
    Any ideas? 
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

    X. wrote:
    Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade to the latest versions to check whether things have gotten any better.
    Any news on that?
    @mellroth figured out the solution :-)
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

  • HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

  • TS4036 icloud backup to new device is not working as says I dont have enough storage, even although the backup is only 3GB out of my 5GB (giving more than 1GB available!)???

    back up from icloud to new device is not working as it is saying that I dont have enough storage, when I am only trying to use 3GB out of my 5GB allowance???

    I may misunderstand your post - you "backup TO icloud" or restore from icloud to a new device.  Not sure which of these you mean.
    If backing up TO icloud, the problem may be that there's not enough storage on your device, not icloud, as a device needs a good bit of storage to create the backup.
    If restoring from icloud to a new device and you get the error, the storage referenced must be that on the device, although that doesn't seem possible, since a device has more memory than 5GB.

  • When I connect my ipod touch tomy computer it says that the device will not work because the Apple mobile device hasnt been activated?

    Why does a meesage pop up when I connect my iPod touch saying that the device will not work because the Apple mobile device hasn't been activated?          

    Refer to this article to restart AMDS:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567

  • Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

    I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
    A device is not working properly
    Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
     Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
    Open Device Manager
    Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
    Switch to the Driver tab, click Update driver and follow the instructions
    When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
    How do I update the driver to stop receiving the error?  
    This question was solved.
    View Solution.

    I have solved the initial problem.    
    I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

  • In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • Audio device is not working, i have installed proper drivers, but audio device is not working

    hi,
    I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system,  My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

    Tecra A8
    Model No = PTA83L-04C02N
    Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
    Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
    Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
    Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
    Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
    Good luck!
    -Jerry

  • My audio device is not working

     hello
            I don't know the reasone behind it but my audio device is not working but I rember accedentally i uninstail my IDT audio device.

    Hello rasfunkey,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you have uninstalled your audio drivers and require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Are mobile internet USB devices still not working on Snow Leopard?

    Are mobile internet USB devices still not working on Snow Leopard? I actually had to go back to my previous operating system to get this to work. I would however prefer to use Snow Leopard...if Apple & HUAWEI have finally got their act together!

    There appears to be a problem with drivers for USB wireless modems with 10.6. I upgraded from Leopard to Snow Leopard and now can't connect to the internet with my wireless modem. I hope Apple sort this out soon. Or maybe it's Huawei that needs to put a 10.6 driver into its software.

  • The apple mobile device is not working on the ipad. how can i fix it?

    My apple mobile device is not working on my ipad and my itunes dosn't work now. How can I fix it?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for