Bluetooth devices are not working properly since ios 7 update...

Since I updated to ios 7, my Bluetooth devices are only partially compatible with my iphone.  The devices will allow me to use the phone and all audio/video playback.  However, I have lost the ability to do simpe tasks such as forward/reverse tracks with my devices.  This loss of functionality is consistent across both Bluetooth Speakers (Monster Clarity HD) and in my vehicle (Lincoln MKX.)
Any suggestions?
Thanks!

This problem can be both hardware or software related. To elimnate the option of it being hardware related, I would make a Genius Bar appointment at your nearest Apple Store and have them check it out. They will be able to rule out the hardware issue. There are a couple of ways to try and fix hardware issues: 1) hard reset or 2) device restore. I've have linked articles with instructions to both for your reference.

Similar Messages

  • My copy and paste functions are not working properly since iOS 8 update

    Ever since I updated to iOS 8 on my iPhone 4s the copy and paste function isn't working. It'll work the first time but any time I copy something else it pastes the first thing I copy. The only fix I've found is rebooting the phone but that is a pain to do every time I want to copy something and should be very unnecessary. I updated to 8.0.2 but that didn't fix it.

    Have you tried rebooting?

  • Hyperlinks are not working properly since iOS 8.0.2

    I have an iPad Air.  Has anyone else noticed that when you click on a link, you now have to press and hold the link to open in other tab, otherwise the link doesn't go anywhere?

    (A) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (B) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • IMessages not working properly since iOS 7.1?

    Ever since updating my iPhone 5S to iOS 7.1, my iMessages have been playing up. I will send a message to someone and 5 minutes later it will tell me that it didn't send, but the person gets my message anyway. And I will not recieve messages until hours after they have been sent. Very annoying please tell me how to resolve this problem!! I have tried turning it off and back on again, no change.

    Hi there Jocelynwinns,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    -Griff W. 

  • Keyboard not working properly since ios 8

    WWhen I try to share links from other apps I get so many problem. If I try to share a link via sms the screen is sitting out of view to the right and if I try to send via email I get no keyboard at all Making it impossible to manually add an email or subject field. On many apps the keyboard rotates to landscape mode while the type area is normal despite the phone being perfectly  vertical.
    also videos on facebook will not play at all  but youtube works perfect apart from the keyboard issues.
    YOutube search arch box is always hid under the clock, battery and network status bar at the top of screen but this could be an issue for youtube to resolve. My iphone 5 is just generally slower and often freezes and crashes. I'm not expecting support on these issues in just posting to let Apple know and to vent my frustrations. In events like this apple should make the old version available for download as a normal update until these issues are resolved. It's so hard to believe that someone as big as Apple can get it so wrong.

    (A) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (B) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • Maps on the 5s not working properly since IOS 8.02

    I have downloaded ios 8.02 on my iphone 5s and my maps app is now giving incorrect directions sometimes. I tried to go to the following address "8 Bureau Drive. Gaithersburg, MD 20878" and it puts me at some random intersection in Gaithersburg, md.

    Hello bacheman,
    The article linked below details how to go about reporting incorrect results in the Maps app.
    Get help with Maps on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT6466
    Cheers,
    Allen

  • Help! Trackpad gestures are not working properly after Yosemite update

    So yesterday I updated my MBA to Yosemite. And since then I'm facing severe problems with my trackpad. Scroll and click gesture works as usual, but the other gestures suddenly stops working. I even checked my trackpad settings, but couldn't find any setting issues there. They won't just respond to any. Is it just me or everyone is facing such issues.

    worse than that, my MacBook Pro FREEZES when using 4 finger swipe on the built-in trackpad for App Expose after upgrade to 10.10.1
    Before 10.10.1 everything was working fine. Now, about one third of the time I use the 4 finger swipe the computer is dead (apparently mostly when using Numbers). I can still use the mouse but no response to clicks, keyboard, trackpad, or screaming out loud. All I can do is turn it off!
    This (in combination with Mail issues) is so bad that for the first time since using Mac I start thinking going back to PC...

  • Music/iTunes Match not working properly since update to iOS 7

    Music/iTunes Match not working properly since update to iOS 7

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • HT1688 my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August

    my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August

    If you're not a registered developer, it means you've stolen Apple's software.  Now you come to an Apple forum and ask for help?  You're lucky you're not being prosecuted!
    You can receive no help for stolen software here.  Enjoy your iBrick.

  • Why the games are not working properly in my ipad after installing iOS7

    Why games are not working properly in my ipad in my iOS 7

    The games you mention would have been written and therefore designed for the previous version of iOS - you've most likely had a lot of updates lately in the run-up to the release of iOS 7 and if these games haven't had an update then chances are these will need to be adapted to iOS 7 by the developers if not working correctly.
    Regards,
    Steve

  • Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

    I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
    A device is not working properly
    Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
     Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
    Open Device Manager
    Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
    Switch to the Driver tab, click Update driver and follow the instructions
    When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
    How do I update the driver to stop receiving the error?  
    This question was solved.
    View Solution.

    I have solved the initial problem.    
    I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

  • My laptop speakers are not working properly so wanted to visit service centers of hp in london

    from yesterday night my laptop HP pavilion g6 speakers are not working properly. out of many only one speaker is working so i want to visit authorized service centers so that i can fix the issue.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp56001-56500/sp5646​0.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if this has had any effect on the audio issue.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Tecra M5: finger print sensor is not working properly since a drink was spilt into the keyboard

    My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
    This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
    Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
    Can anyone tell me how I completely disable it?
    Thank you.

    Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
    Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook.

  • Device driver not working properly

    windows reports that the BHDrvx64 device is not working properly. have tried everything to fix including  system restore. windows does not have an update for this device, also tried hp software and driver downloads site and could not get specific information on exactly what kind of device it pertains to.  right now system is not to bad and would hate for it to crash on me

    Lia.
    Are you using Norton???
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

Maybe you are looking for