Bluetooth does not start at Satellite L850-BJS when Flash Cards installed

With installed Toshiba flash cards Bluetooth is not working, when I delete all works.

I installed in this sequence:
Bluetooth Filter Driver Package Realtek Semiconductor Corporation 2.3.9.0211.2012, then Bluetooth Stack 9.00.00T, then USB Driver AMD Windows 7 - 64 Bit 1.0.0.72, then Display Driver AMD Windows 7 - 64Bit 8.942-120213a-133550, then Wireless Lan Driver Realtek Semiconductor Corporation Windows 7 - 64Bit 2.00.0020, then Value Added Package Toshiba Windows 7 - 64 Bit 1.6.0023.640204 .
But BT does not work with instaled flash cards

Similar Messages

  • When trying to turn on the icon jumps but does not come on. It quit when trying to install update.

    We are unable to access firefox. It does not come on when you key on the menu bar

    Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

  • App Rejection: After purchasing the subscription the magazine does not start to download.

    Hi Everyone,
    My app has been rejected, with error code 2.2 that it exibits bugs namely "After purchasing the subscription the magazine does not start to download.".
    When I've gone back to test my app on the ipad, I've realised that it doesn't say 'purchased' after confirming the subscription, and instead it still says 'buy' and the subscribe button is still enabled.
    I've followed the instructions in this article: http://helpx.adobe.com/digital-publishing-suite/kb/subscription-fail-ios-renditions.html, I've set all published dates to the 29th of October 2012 both in the Folio Producer Organiser and in itunes connect (Newsstand, in-app purchase section) and it still doesn't work. I've entered the secret code in the administration area also. The subscription product ID is identical in itunes connect and the Viewer builder. I've deleted the app and re-downloaded it multiple times on the ipad, updated the folio in the folio producer many times...
    Can anyone see what I might be doing wrong? Is there something I have missed?
    I appreciate your help.

    @FLTAron, were you able to resolve your issue, 'cause I am facing  exactly same issue

  • Satellite A200 does not start anymore.

    Hello, im trying to find a whats going on with my laptop. It's a Satellite A200 on Windows 7 professional.
    From a few days ago i cant start the laptop anymore. It doesnt look like a software issue because when i push the power button, the only thing that happens is the power led turns on (blue color) and, 2 seconds later, starts to blink orange. And never passes this stage.
    The screen remains as off, and i think, the BIOS does not start as well.
    Ive already tried to remove the Ram and the hard drive - Keeps doing the same. Doesnt even bleeps over the missing Ram or drive!!!
    Anyone have any ideia about whats going on??!! Please anwser!
    Sorry for the english. Portugal here ;)

    > Do you kown if this is a comom problem with this laptop model?? Because i have read in a few forums that is a common problem with this laptop
    Unfortunately, this is a common problem for many laptop models. My old laptop (non Toshiba one) also had such problem with southbridge malfunction. I just threw it into garbage as replacing mobo is pretty expensive procedure. it's better to buy new one or second-hand

  • Satellite C660 does not start up

    Yesterday we purchased a Satellite C660 with Windows 7 64bit installed. Worked just fine but today the laptop does not start up again. Updates were installed but after pressing the power button the light of the hdd turns on for a few seconds, the vents work for two seconds and then ... nothing !
    Please help !

    You cannot start notebook at all?
    Can you enter BIOS settings with F2 at start up?
    Which updates have you installed?
    If nothing works you have only one choice: either bring it back to your local dealer and ask for replacement or contact Toshiba service provider directly. They can check hardware and help you with this.

  • Satellite A200 does not start up - LED flashing error

    I have problem with my Satellite A200.
    The battery button is flashing 2 times blue and 2 times orange and it does not start.
    Can somebody help me???????

    Hi
    Please check this interesting document: What can I do if my computer will not Power On?
    If the problem persists please let us know.

  • Satellite U400 - error - Bluetooth has not started

    I have used my u400 for 3 months without problem...
    Then suddenly several problems with bluetooth occured...
    When I wanted to use BT for example OBEX, I got error msg: "Bluetooth has not started".
    I tried to reinstall driver for bt, but I couldn't. I got this error msg: "Please insert BT stack". So I decided to reinstall windows vista with recovery disk. On fresh install of vista, there were no bt drivers pre-installed. So I installed drivers and everything was fine for 2 days..
    Now bluetooth is not working again.. can NOT reinstall drivers becouse of error msg again (Please insert BT stack) (Of course, the wifi switch is turned on).. The interesting thing is that in device manager is no BT hardware...
    Any ideas?

    Hi buddy
    Ive got a U400 too and I never had any BT issues
    I updated the BIOS to the latest state
    Did you do this too?
    If not you could try to update the BIOS
    Furthermore I recommend enabling the BT using the FN+F8 key combination
    Using this buttons you can enable and disable the Bluetooth and WLan
    Check it!

  • Satellite L650-12Q does not start up

    I have a toshiba L650Q laptop. Its been working fine since 1.5years now..
    Just a couple of days back I closed the laptop ie closed the screen ( typically it puts the same in sleep mode).
    After about 10 min when I tried to open & start up the laptop simply does not startup :(
    I can see the battery & power adapter LED glow, but when I press the start button, it simply does not start..
    there is momentary glow of the power on button, i hear the fan trying to start up & then it dies down in abt 2 seconds & laptop simply does not start up..
    I tried the below troubleshooting steps but no success
    1) I removed the battery & tried starting using the adapter, it dint start up
    2) I put the battery out for like 1 hour & then tried again, it dint start up
    Please advise the troubleshooting steps or any pointers as what could the problem be & how can i resolve it..
    Message was edited by: dhiru23

    Try this:
    - Remove the battery and disconnect the AC adaptor.
    - Press power button 30sec long
    - Connect battery and AC adaptor to the notebook
    - Try to power up the unit.
    If this fails, check the memory modules.
    Remove one module and try to boot the notebook using one module. Run the test for each slot and module.

  • Satellite A series does not start up after BIOS update

    After bios update with downloaded utility my notebook does not start up.
    Did this case covered by warranty?

    Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
    PS: Did you try this workaround:
    - remove battery, disconnect the AC adaptor
    - wait ~ 40min
    - connect both devices again and try to power up the notebook

  • Satellite 1800-814 does not start if AC adapter is plugged in

    Hello,
    I've got a problem with my 3 year old 1800-814.
    It all began with sudden Windows crashes. Sometimes it ran smooth, sometimes it just hung up. So I decided to reinstall the notebook. My Problem is when it is plugged into pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 secs. On battery it starts every time. What can I do? Defect hardware or just dust somewhere?
    Thanks,
    Jens Grieger

    Hi,
    If you have a voltage tester test the AC adapter and see if it has the right current voltage, which is written on the adapter. If it does, plug the adapter into the portable and move it around, see if the light turns on and off while you are moving the ac plug(near where it plugs in to the computer, to see if it is a loose ac harness inside the computer). Does the computer randomly turn off if you have the battery removed? Or do you notice that it suddenly switches to battery power and back to AC adapter while the adapter is plugged in? Could be the adapter. Check that first. If that is good, then check the adapter plug(located on the back of the computer, where the adapter plugs in) to see if it is loose. If you find that it is loose, you can take it to an Authorised Service Provider and have them fix it. I hope this helps.

  • Listener (and database instance) does not starts up automatically: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

    Hi at all.... I'm a newbie with database oracle.,
    I have the follow problem:
    I installed Oracle Database 11g R2 XE on my guest operating system CentOS 6.5.
    I have changed  the hostname in my SO CentOS (where is installed oracle 11g R2 XE) after installation was completed successfully.
    -) Before and during installation the hostname was localhost.
    -) After installation I changed the hostname in VMCentOS
    From the moment I changed the hostname, nothing starts up automatically. In particular, the listener and the database instance does not starts up automatically.
    When I starts up the listener manually and I try to connect to database instance with SQLPLUS i get this error:
    ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    I think that the problem is due to the changed hostname because I, for testing and debugging purpose, re-installed a new OS CentOS virtual machine, re-installed oracle database 11g and  I have not got that problem. The database instance and the listener starts up automatically!
    Can any one tell me if maybe the problem is related to the hostname changed? ... and Why?
    P.S.: After changed the hostname I have also modified the listener.ora and the tnsnames.ora by modifying the HOST with the correct hostname.

    -) Output of command chkconfig (there isn't any line oracle-xe 0:off   1:off  2:on  3:on  4:on  5:on  6:off):
    [oracle@VMCentOS /]$ chkconfig
    NetworkManager     0:off    1:off    2:on    3:on    4:on    5:on    6:off
    abrt-ccpp          0:off    1:off    2:off    3:on    4:off    5:on    6:off
    abrtd              0:off    1:off    2:off    3:on    4:off    5:on    6:off
    acpid              0:off    1:off    2:on    3:on    4:on    5:on    6:off
    atd                0:off    1:off    2:off    3:on    4:on    5:on    6:off
    auditd             0:off    1:off    2:on    3:on    4:on    5:on    6:off
    blk-availability    0:off    1:on    2:on    3:on    4:on    5:on    6:off
    bluetooth          0:off    1:off    2:off    3:on    4:on    5:on    6:off
    cpuspeed           0:off    1:on    2:on    3:on    4:on    5:on    6:off
    crond              0:off    1:off    2:on    3:on    4:on    5:on    6:off
    cups               0:off    1:off    2:on    3:on    4:on    5:on    6:off
    dnsmasq            0:off    1:off    2:off    3:off    4:off    5:off    6:off
    firstboot          0:off    1:off    2:off    3:on    4:off    5:on    6:off
    haldaemon          0:off    1:off    2:off    3:on    4:on    5:on    6:off
    htcacheclean       0:off    1:off    2:off    3:off    4:off    5:off    6:off
    httpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
    ip6tables          0:off    1:off    2:on    3:on    4:on    5:on    6:off
    iptables           0:off    1:off    2:on    3:on    4:on    5:on    6:off
    irqbalance         0:off    1:off    2:off    3:on    4:on    5:on    6:off
    jexec              0:off    1:on    2:on    3:on    4:on    5:on    6:off
    kdump              0:off    1:off    2:off    3:on    4:on    5:on    6:off
    lvm2-monitor       0:off    1:on    2:on    3:on    4:on    5:on    6:off
    mdmonitor          0:off    1:off    2:on    3:on    4:on    5:on    6:off
    messagebus         0:off    1:off    2:on    3:on    4:on    5:on    6:off
    netconsole         0:off    1:off    2:off    3:off    4:off    5:off    6:off
    netfs              0:off    1:off    2:off    3:on    4:on    5:on    6:off
    network            0:off    1:off    2:on    3:on    4:on    5:on    6:off
    ntpd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
    ntpdate            0:off    1:off    2:off    3:off    4:off    5:off    6:off
    portreserve        0:off    1:off    2:on    3:on    4:on    5:on    6:off
    postfix            0:off    1:off    2:on    3:on    4:on    5:on    6:off
    psacct             0:off    1:off    2:off    3:off    4:off    5:off    6:off
    quota_nld          0:off    1:off    2:off    3:off    4:off    5:off    6:off
    rdisc              0:off    1:off    2:off    3:off    4:off    5:off    6:off
    restorecond        0:off    1:off    2:off    3:off    4:off    5:off    6:off
    rngd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
    rsyslog            0:off    1:off    2:on    3:on    4:on    5:on    6:off
    saslauthd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
    smartd             0:off    1:off    2:off    3:off    4:off    5:off    6:off
    snmpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
    snmptrapd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
    spice-vdagentd     0:off    1:off    2:off    3:off    4:off    5:on    6:off
    sshd               0:off    1:off    2:on    3:on    4:on    5:on    6:off
    sysstat            0:off    1:on    2:on    3:on    4:on    5:on    6:off
    udev-post          0:off    1:on    2:on    3:on    4:on    5:on    6:off
    vmware-tools       0:off    1:off    2:on    3:on    4:on    5:on    6:off
    vmware-tools-thinprint    0:off    1:off    2:on    3:on    4:on    5:on    6:off
    wdaemon            0:off    1:off    2:off    3:off    4:off    5:off    6:off
    winbind            0:off    1:off    2:off    3:off    4:off    5:off    6:off
    wpa_supplicant     0:off    1:off    2:off    3:off    4:off    5:off    6:off
    [oracle@VMCentOS /]$
    Moreover in /etc/sysconfig there isn't any file oracle-xe!!!
    At this point, I suspect that something in the installation I mistook.

  • My iMac does not start.

    My iMac does not start. When I turn it on, it stays loading in the half and doesn't continue. Some days before I had updated my iMac to Yosemite 10.10. Everything was ok but yesterday I decided tu reboot it and when it was turning on this happened, it kept stuck at the middle of the bar. I have the latest model of MacBook Air '13.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Bluetooth daemon not starting

    Hi,
    Not so much of a problem but, bluetooth daemon does not start on boot up.... sure I have it in daemons [no @!] but when you run hcitool scan you get no device found..
    Is there a better place to start /etc/rc.d/bluetooth? ir rc.local maybe ?
    thanks
    MrG

    we havent resolved the issues we have with RDA.
    First when we opened a msg with SAP they asked to apply these notes:
    1048864 - RDA daemon does not close empty requests
    1042790 - P14: Real-time: QM action for real-time PSA request
    Which fixed most of issues and but the delta queue wasnt being deleted in source system even after the data is loaded and request closed. Now they asked us to apply other note 1089041 - RDA InfoPackage does not delete delta queue which is supposed to be part of SP16. And guess what we patched our system with SP16 and Now the RDA doesnt work at all :). The RDA is active but the daemon never wakes up - So opened anyother note with SAP. And pretty soon I hope I will be making good friends with the SAP consultant I'm working with all the messages going back and forth.
    Let us know if you found a magical way to make ur RDA work. I guess we decided to hold on RDA till starts behaving stable (may be SP53- you never know). And I would personally like to be able to close the request in 30mins and not 1hr default it has. I tried playing around with the FM's - no luck.

  • Pages does not start any more

    Hello
    I have a macbook pro running Mac OS X 10.6.8 and I just updated my macbook software and now pages does not start.  I double click on the icon and it does not start.
    I have tried to open some pages documents and it open unarchiver.
    Can someone help?
    It was working a couple of days ago I am sure.
    Thanks in advance
    Ozzy

    Hi
    Thanks everyone for the input.
    I tried all this but nothing worked, then I have tried to reinstall pages from the Iwork 09 disc.
    Then pages came up but now it i get this error message
    Pages cannot be opened because of a problem
    Check with the developer to make sure Pages works with this version of Mac OS X.  You may need to reinstall the application.  Be sure to install any available updates for hte application and Mac OS X.
    This report will be sent to Apple Automatically.
    Comments
    Problem details and system configuration
    Process:         Pages [1333]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         ??? (???)
    Build Info:      Pages-7660000~4
    Code Type:       X86 (Native)
    Parent Process:  launchd [109]
    Date/Time:       2013-09-24 22:59:46.631 +0100
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          950866 sec
    Crashes Since Last Report:           3
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      3A35CCB0-5BFE-4847-A949-31633205D0DA
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @rpath/Inventor.framework/Versions/C/Inventor
      Referenced from: /Library/Application Support/iWork '09/Frameworks/SFCompatibility.framework/Versions/A/SFCompatibility
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898, 557.1 MB
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0x24600000 / 2
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0x26100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06600000 / 4
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8213, 0x06610000 / 6
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x06500000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0237, 0x06300000 / 2
    Can any one help?

  • Smartwatch 2 not working (update does not start, SW is stuck)

    Hello. I just bought SW2. I turned on NFC on my phone and placed SW2 on the back of my phone. Phone and SW2 made connection. SmartConnect was installed on my phone BUT then it wants me to install SW2 app (release date 13.12.2013). OK it installs the SW2 app and then progress bar appears on my SW2 and thats it. No progress at all. Phone just saying "downloading updates to SW2" but never starts. I waited two hours but nothing happend.
    I try to describe averything I have tried in detail, hoping so that someone can help me.
    I tried to use Sony Mobile Update service. I connected SW2 to my PC and Sony Mobile update service said that there is update available. So I do the update, SW2 restarts BUT then all starts over again. SW2 app is still trying to download updates but nothing happens. I tried to uninstall everything and reinstalling SmartConnect and SW2 app but that did not help.
    Then I used someone elses phone. I connected SW2 with other phone than mine, pairing worked, SW2 app managed to install the updates (this is where i got stuck with my phone) on SW2 and everything worked. Then I did reset on the SW2 and paired with my phone again. Pairing seems to work. Phone says that SW2 is connected BUT nothing really works. No notifications, facebook app does not show anything. Smart Music Player does not work, Smart Camera does not work. When I click on any app that needs to interact with my phone, a "waiting bar" appears for a few seconds and then nothing, silence. Whe I turn off the bluetooth on my phone, the SW2 app says that SW is disconnected and then I trun on the bluetooth, then it connects again. SW2 and phone seems to be connected but it seems that no information is moving between them. And then there is the battery drain. When SW2 and phone are "connected", the battery on my phone lasts about 3 hours max.
    So I tried the Sony Mobile Update service again. Suprisingly. update was available, even tough I did the update befoe AND with my friends phone. So i do the update again and now I am back where I started - my SW2 and phone are "connected" and SW2 app wants to install updates to SW2 but the downloading process does not start and I can not use SW2 without it. So I need my friends phone again just so that I can use SW2 as a regular watch.
    My phone:
    LG-P940 (Prada 3.0)
    Android 4.0.4 ICS
    I have heard that people with LG phones are experiencing the same issue...

    It seems that we are suffering from the same problem I also have an LG phone aswell.

Maybe you are looking for

  • When I define my R/3 system in XI SLD,I got CIM_ERR_ALREADY_EXISTS message

    <b>CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCSystem.CreationClassName="SAP_BCSystem",Name="BRP.SystemNumber.0020270914.SystemHome.sapprddb"</b> Before I defined R/3 system in XI SLD wrongly, after that I delete from Business and technica

  • No playback in iTunes 10.6.1, updated to 10.6.3, still doesn't work

    Worked fine until suddenly today lost playback. Tried updating to 10.6.3, but to no avail. Same problem back when updated to 10.6 OS X 10.6.8, MacBook 2.0 GHz (2007)

  • Exporting to Flash using Quicktime pro

    I'm trying to export a 43 min vid from FCP6 using quicktime conversion. I want to export to Flash. Its for web content, and its in widescreen. Any help with size and converting to flash would help. I've never done web content before. Thanks!! tec24

  • QUICKTIME 7 and KODAK EASYSHARE CAMERA - Incompatibility

    Hi, newbie so sorry if already covered this. My KODAK camera (V610) plays .mov files perfectly on quicktime 6 that came with the camera. I had to install Quicktime 7 to get my IPOD to work and now the .mov files dont play (get sound but no picture).

  • Provide, endprovide and protect

    what is the difference between provide..endprovide and  protect...endprotect statements Title edited by: Alvaro Tejada Galindo on Jun 12, 2008 6:51 AM