Bluetooth doesn't work after E90 firmware update!

Nokia staff - help needed!
Bluetooth has stopped working after E90 firmware update.
The following on-screen message is shown: "Unable to perform Bluetooth operation!"
P.S. Reinstalling firmware via Nokia software update doesn't help at all. If connectivity problem still can be solved with USB cable, the worst tning is that I can't use my phone's BT handsfree when driving.

Hi hanzzi
No information as to what device you are using, but try deleting E:\CITIES + .qf file from memory card then restart OVI Maps application to re-define folder structure required to download regional mapping using OVI Suite.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Bluetooth volume not working after last firmware update

    After the latest firmware update I'm not able to adjust the volume. Both when i use the volume rockers on the side, or try it via settings, the indicator shows changeing volume - but there are no difference. VERY ANOYING! 
    any solution planned for att this issue? 
    Edit; just notice that the bluetooth volume is working on headset but not on devices with only media playback. (Working with SBH20 but not with AV-receiver or bluetooth speaker) 

    I can confirm that my Z2 bluetooth volume control stops working when i use it with my logitech bluetooth speaker.
    Bluetooth volume control does not work when I use Spotify, TuneIn Radio Pro, SoundCloud or Walkman. However the seemingly same bluetooth volume control works when I use Poweramp.
    At first I tought that the problem was related to streaming music but since the Walkman bt sound volume does not work on local media files it is not the case.
    The bluetooth volume control works with my Nexus 7 and Lumia 1020.
    Does anyone have heard from Sony regarding this issue?

  • Why tethering with USB cable doesn't work after IOS6.0 update?

    why tethering with USB cable doesn't work after IOS 6.0 update?

    Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

  • Left. Speaker doesn't work after 8.1 update

    Left speaker doesn't work after 8.1 update

    What "left speaker"?  The iPhone has one speaker, which is on the right as you look at the bottom of the phone.

  • Gnome-Bluetooth doesn't work after Gnome 2.28 update.

    It seems that gnome-bluetooth package is broken.
    Before the update I have started bluetooth by Fn+F5. Now when the bluetooth is on the output looks like this
    [szelek@IBM ~]$ bluetooth-applet
    ** (bluetooth-applet:19014): WARNING **: Could not open RFKILL control device, please verify your installation
    /home/szelek/.themes/AlunDark/gtk-2.0/gtkrc:98: Murrine configuration option "highlight_ratio" will be deprecated in future releases. Please use "highlight_shade" instead.
    /home/szelek/.themes/AlunDark/gtk-2.0/gtkrc:99: Murrine configuration option "lightborder_ratio" will be deprecated in future releases. Please use "lightborder_shade" instead.
    ** (bluetooth-properties:19017): WARNING **: Could not open RFKILL control device, please verify your installation
    ** (bluetooth-properties:19017): WARNING **: Failed to change RFKILL state: Błędny deskryptor pliku
    The button says: Turn Bluetooth On.
    Bluetooth-preferences looks all the time the same. I can click on this button, it becomes grayed out (unavailable) but nothing happens afterwards.
    I tried running bluetooth-wizard but it says that bluetooth is off even though it supposed to be turned on.
    Maybe there are some problems with bluez configs after the update? Well I hope that someone have a solution for this one

    I have a similar problem: I do not use bluez-gnome, just bluez and blueman, but after the dbus update I get this error in /var/log/errors.log:
    Oct 18 15:39:07 paranor bluetoothd[3565]: Can't load plugin /usr/lib/bluetooth/plugins/netlink.so: /usr/lib/bluetooth/plugins/netlink.so: undefined symbol: debug
    Oct 18 15:39:07 paranor bluetoothd[3565]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
    Oct 18 15:39:07 paranor bluetoothd[3565]: probe failed with driver input-headset for device /org/bluez/3565/hci0/dev_00_22_66_D9_9B_C9
    Also, when I try to launch bluetoothd manually, I get this...
    [root@paranor ~]# bluetoothd -nd
    bluetoothd[4295]: Bluetooth daemon 4.56
    bluetoothd[4295]: Enabling debug information
    bluetoothd[4295]: parsing main.conf
    bluetoothd[4295]: discovto=0
    bluetoothd[4295]: pairto=0
    bluetoothd[4295]: pageto=8192
    bluetoothd[4295]: name=%h-%d
    bluetoothd[4295]: class=0x000100
    bluetoothd[4295]: discov_interval=0
    bluetoothd[4295]: Key file does not have key 'DeviceID'
    bluetoothd[4295]: Unable to get on D-Bus
    ...while in errors.log I get these messages (after several attempts):
    Oct 18 15:53:26 paranor bluetoothd[3914]: Unable to get on D-Bus
    Oct 18 15:57:09 paranor bluetoothd[4156]: Unable to get on D-Bus
    Oct 18 15:57:25 paranor obex-data-server: sdp_send_req_w4_rsp: Error sending data:Broken pipe
    Oct 18 15:57:28 paranor bluetoothd[4181]: Unable to get on D-Bus
    Oct 18 15:57:37 paranor bluetoothd[4198]: Unable to get on D-Bus
    Oct 18 15:59:36 paranor bluetoothd[4224]: Unable to get on D-Bus
    Oct 18 16:14:23 paranor bluetoothd[4271]: Unable to get on D-Bus
    Oct 18 16:16:50 paranor bluetoothd[4295]: Unable to get on D-Bus
    Can anybody help me? Thanks!!

  • Adobe Reader doesn't work after windows 7 update

    Hello,
    My Adobe Reader X was working fine, until one night where Windows 7 automatically updated, and after that Adobe Reader doesn't work anymore. It doesn't respond AT ALL when I click on it, and I cannot view PDF files anymore.
    I uninstalled it, and re-installed it --- still doesn't work. I tried downloading version 9, but still it doesn't work.
    I also tried to do system restore, but somehow it won't let me --- it says it failed to do so.
    When I try to open PDF files in IE 10, it says "There is a problem with Adobe Acrobat/Reader..." and an error code of 103:103.
    Could anyone help me?
    Thanks!

    You can try running cleaner on your machine
    http://labs.adobe.com/downloads/acrobatcleaner.html
    and then again install latest Reader from
    http://get.adobe.com/reader/enterprise/

  • Audio doesn't work after a BIOS update + strange beeps during bootup

    Hi,
    I just bought a MSI motherboard,  915P Neo 2 platinum.
    1.
    Everytime I boot up the system, I hear a set of beeps...it sounds like 1 long, 2 short beeps...so I followed the instructions and re-seated the memory and it still does beeping.
    2.
    MY MAJOR PROBLEM RIGHT NOW IS
    I did a BIOS update using MSI LIVE UPDATE 3 and after that the sound doesn't work.  I check for "unknown PCI devices" under WinXP but there are none.  I re-installed the azalia driver again from the originial driver cdrom and still no luck.
    I hope someone can tell me what is happening here and help me to fix it
    thanks a lot in advance
    regards,
    Kittu

    Hi,
    Thanks for the quick reply.
    I also did some updates along with BIOS.
    I am listing them below.
    I installed the following updates which the "Live update 3" reported as applicated to my system
    MS-7028 v1.50
    Intel INF Update v6.2.1.1001
    VIA SATA&IDE RAID Drivers v5.1.2600.410
    After this, I noticed the sound was not working so I re-installed the azalia bus driver and still the sound didn't work.  So, I checked the bios and changed the value of the audio-mode from AC97 to Azalia.  Then, again re-installed the azalia driver but the sound still doesn't work.
    How do I re-install the CMedia audio driver ?
    How do I clear the CMOS ?
    thanks,
    Kittu

  • Bluetooth is not working after 4.3 update in zr

    After i updated my xperia zr to 4.3 the bluetooth is not working, it wont shows any blutooth devices and acnt able to pair.pls give me the solution immediatlly

    I do not know,you need to contact sony:
    http://www.sonymobile.com/global-en/support/contact-us/
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Bluetooth doesn't work after sleep mode wake up

    Okay, so my computer goes to sleep while in Windows XP and I wake is up. I have my bluetooth mouse and keyboard hooked up to it and I try to wake them up. My mouse doesn't reconnect. I notice that my computer also says that it's not connected to my wireless network, but the my web browser and messenger still connect fine. I check my bluetooth preferences to find out that nothing is connected and when I try to reconnect it doesn't work. This never used to happen and it just recently started when I reinstalled windows this past week. The only way I could get the devices to reconnect was to reboot and even then when my computer goes back to sleep they still disconnect.
    Anyone else have this problem... or better yet, an answer?

    How did you actually solve your problem ?
    I have this too on a macbook 2.4.
    any help appreciated, this is very annoying.
    I installed all latest updates to windows/bootcamp. Did not help.

  • Mac Mini doesn't startup after failure firmware update..

    Hello.
    I have a mac mini.
    Downloaded firmware update and Mac OS X update through MAC OS X Software Update.
    After that my Mini Mac ask me to restart.
    And now my display shows "No signal" message and no startup sound. Indicator lights up, can hear Hard Drive sound and DVD disk sound, optical mouse lights up... and nothing else.
    I tried to reset PMU... nothing again (

    Hey Guys today i updated my macmini from 10.5 to 10.5.2 i downloaded the file 343MB on http://www.apple.com/support/downloads/macosx1052comboupdate.html since i have a slow connection i took me 5 hours to download the file after installed and and saw the success intallation with a green checkmark then restart and it presented me a blank white screen as i was reading the discussion i read that just leave it as the OS is doing it's thing but there is no indication whatsoever just a blank screen. then i saw my SD card reader blinking i remove it thinking that its the cost why there is now indicator that the HD is still reading so ive waited for 30mins without touching a thing and finally i heard the CHIME OF RELIEF the apple logo flashes and I have installed my OS 10.5.2 successfully

  • My aluminum wireless don't work after the firmware update !!

    i just bought a new wireless keyboard and i found that there an update(Firmware update 1.0) and when i update the keyboard the keyboard didn't work !
    the update took a long time to update ! (approx. 20 min!!)
    can you help me !
    Regards ,,

    Hello Mohammed:
    I suspect that the update was, somehow, interrupted.
    I suggest you contact Applecare as the KB is new and under warranty.
    Barry

  • 3G maps doesn't work after 4.2 updates

    I have googled this, called Apple, and contacted an Apple iPhone Engineer personally. Everyone at Apple insists this is not a known issue, but judging by how many posts there are about it, it can't be unknown... After all, I just told them, right?
    Anyway, I've tried everything out there from turning off Location Services (with Restart) to Reseting Network (opening Maps outside and selecting the gps symbol). The map freezes, crashes, and bottom line - does not work anymore. It used to work over a year and a half ago. 

    Thanks for a quick reply, Christian.
    1. I use the same browser (on my lap top) when testing the app. with version 4.1 vs. 4.2.1. The app. for version 4.2.1 doesn’t redirect after successful authentication.
    2. The server admin checked the log on server and he doesn’t see any indication that either Apache or the browser has any effect on the page that it is going to.
    ......... - [11/Jan/2013:08:33:24 -0600] "GET /pls/tst/f?p=128:LOGIN:9391925558569 HTTP/1.1" 200 12110
    ......... - [11/Jan/2013:08:37:12 -0600] "GET /pls/tst/f?p=128:1:5517088011070::::: HTTP/1.1" 302 -
    ......... - [11/Jan/2013:08:37:13 -0600] "GET /pls/tst/f?p=128:LOGIN:9391925558569 HTTP/1.1" 200 12107
    I came across other discussions in the forums (and articles) and it seemed that there was some behavior in the login/logout processing has changed with the apex 4.1.1 patch set. We’re currently on apex 4.1.0, so I guess that explains why the same application runs fine in 4.1.0 but not in 4.2.1.
    I changed
    --owa_util.redirect_url('f?p=' || :APP_ID || ':2:' || :APP_SESSION || '::NO::');
    to
    :FSP_AFTER_LOGIN_URL := 'f?p='||:APP_ID||':'|| '2'||':'||v('SESSION')||'::NO:::';
    Now, the application is redirect to correct page. We have to modify other applications in order to upgrade to 4.2.1.

  • HT204407 Find my Friends doesn't work after IOS 7 update

    We use find my friends for our entire family to monitor kids locations, etc.  Since updating to IOS 7, one of the phones only shows it's location sporadically - otherwise says location not available.
    Have verified location services are turned on, nothing is blocked, etc.
    This phone was updated to IOS 7 over wifi (vs. through iTunes) - one other phone had some minor (unrelated) issues after updating over wifi that were resolved by doing a factory reset & updating from iTunes - wondering if that could be cause of the issue here as well.  Anyone else encountering issues with FMF?

    Apple did update their help section on the app. I found this trying to figure out why my Find Friends wasn't working after the update to iOS 7. 
    "Find My Friends is turned on in Background App Refresh (in Settings > General in iOS 7). When Background App Refresh is turned off, Find My Friends can’t use Location Services in the background. If Background App Refresh is turned on, but you quit Find My Friends via the multitasking interface, location updates won’t be sent to your friends until you open the app again."
    Hopefully Apple will update this as it was not this way prior to iOS 7. Killing the app didn't prevent your location from updating in iOS 6 as I constantly killed the apps running in the background and never had this problem till the update. Hope this helps! Just make sure to not kill the app as of now and to tell everyone you follow not to kill their app and locations will continue to refresh. Otherwise it won't update locations till the app is opened again.

  • Screen no longer works after Graphics Firmware Update

    I received my new IMAC 20 inch a couple of days ago. Worked like a charm. perfect.
    I received a request (software update) to update the Graphics firmware for the ATI 2600 processor.
    I performed the update, but I can no longer use the IMAC. The screen just stays black, no longer displays any information. I hear the hard disk working thru the startup process, but the screen just stays OFF.
    I zapped the PRAM, and restarted many times. No success.
    Please help. It worked so fine before this major trouble.
    Patrick

    The iMac Graphics Firmware Update 1.0 states:
    This update is for 20-inch and 24-inch aluminum iMac computers with the ATI Radeon HD 2600 PRO graphics processor, running Mac OS X 10.4.10 or later with iMac Software Update 1.2.1 for Tiger, or Mac OS X 10.5 with iMac Software Update 1.3 for Leopard.
    Perhaps you meant OS 10.5.1. The above update also states:
    Note: If you are running Mac OS X 10.5.1, iMac Software Update 1.3 is included.

  • Bluetooth doesn't work after last update.

    Just like in subject, after updating bluez my bluetooth stoped working. I tried to restart daemon, but nothing helps. It looks like it was off all the time.

    B wrote:
    Can anyone that hasn't updated his ABS tree yet post the PKGBUILDs for bluez-libs and bluez-utils? I'd like to upgrade to the latest 3.36 version.
    Much appreciated .
    Well, I can't figure out how to upload a file to the site, but here's the code for each.
    (1) bluez-libs-3.32
    # $Id: PKGBUILD 2478 2008-06-03 13:47:05Z thomas $
    # Maintainer: Thomas Baechler <[email protected]>
    pkgname=bluez-libs
    pkgver=3.32
    pkgrel=1
    pkgdesc="Libraries for the Linux Bluetooth protocol stack"
    arch=('i686' 'x86_64')
    url="http://www.bluez.org/"
    depends=('glibc')
    license=('GPL')
    options=(!libtool)
    source=(http://bluez.sf.net/download/bluez-libs-${pkgver}.tar.gz)
    md5sums=('5b75852a088e77647c1244c9319be2eb')
    build() {
    cd ${startdir}/src/${pkgname}-${pkgver}
    ./configure --prefix=/usr
    make || return 1
    make DESTDIR=${startdir}/pkg install
    (2) bluez-utils-3.32
    # $Id: PKGBUILD 2479 2008-06-03 13:47:31Z thomas $
    pkgname=bluez-utils
    pkgver=3.32
    pkgrel=1
    pkgdesc="Utilities for the Linux Bluetooth protocol stack"
    arch=(i686 x86_64)
    url="http://www.bluez.org/"
    makedepends=('alsa-lib' 'hal')
    depends=("bluez-libs=$pkgver" 'libusb' 'dbus>=0.93' 'glib2')
    optdepends=('alsa-lib: support for bluetooth audio'
    'hal: support for bluetooth networking')
    license=('GPL')
    backup=(etc/bluetooth/{audio,hcid,network,rfcomm}.conf
    etc/bluetooth/{audio,input,network,serial}.service
    etc/conf.d/bluetooth)
    source=(http://bluez.sf.net/download/bluez-utils-${pkgver}.tar.gz
    bluetooth.rc bluetooth.conf.d)
    options=(!libtool)
    md5sums=('781ad0e5b3583d90e562e408a5226da1'
    '6f3b248670fe80626466b47bc52330e6'
    'dda606b16264859b007ec777c7a5627d')
    build() {
    cd ${startdir}/src/${pkgname}-${pkgver}
    ./configure --prefix=/usr --sysconfdir=/etc --libexecdir=/lib \
    --localstatedir=/var --enable-pcmcia --enable-inotify --enable-alsa \
    --enable-cups --enable-pcmciarules --enable-bccmd --enable-avctrl \
    --enable-dfutool --enable-audio --enable-input --enable-network \
    --enable-serial --enable-hal --enable-dund --enable-hidd \
    --enable-pand --enable-hid2hci --enable-sdpd --enable-glib
    make || return 1
    # appease the RedHat-centric Makefile
    mkdir -p ${startdir}/pkg/etc/init.d
    make DESTDIR=${startdir}/pkg install || return 1
    install -D -m644 ${startdir}/src/bluez-utils-${pkgver}/network/network.conf ${startdir}/pkg/etc/bluetooth/network.conf
    install -D -m644 ${startdir}/src/bluez-utils-${pkgver}/audio/audio.conf ${startdir}/pkg/etc/bluetooth/audio.conf
    rm -rf ${startdir}/pkg/etc/init.d ${startdir}/pkg/etc/rc.d
    install -D -m755 ${startdir}/src/bluetooth.rc ${startdir}/pkg/etc/rc.d/bluetooth || return 1
    install -D -m644 ${startdir}/src/bluetooth.conf.d ${startdir}/pkg/etc/conf.d/bluetooth || return 1
    install -D -m755 ${startdir}/src/bluez-utils-${pkgver}/daemon/passkey-agent ${startdir}/pkg/usr/bin/passkey-agent || return 1
    mkdir -p ${startdir}/pkg/etc/udev/rules.d/
    sed 's|RUN+="bluetooth_serial"|RUN+="/lib/udev/bluetooth_serial"|g' ${startdir}/pkg/etc/udev/bluetooth.rules > ${startdir}/pkg/etc/udev/rules.d/bluetooth.rules || return 1
    rm ${startdir}/pkg/etc/udev/bluetooth.rules || return 1

Maybe you are looking for