Bluetooth dongle license that needs the device address

PLEASE HELP ME
I have just bought the MSI BToes Bluetooth Dongle and when i tried to install it, it kept saying that the device cannot be found, i downloaded the latest driver and software and that installed it fine. But it asked for the serial number on the dongle but i do not have one. I went to the WIDCOMM website and it asked for the device address, but i cannot gather mine because the software that i need is not installed because it needs the serial number, and the serial number needs the device address
Can you please help me get out of the never ending circle, PLEASE
Thanks
Ben Evens (Ben13muk)

I take it you mean the Physical Address of the BToes dongle yer? if so i have got that but i can't find where to get the lisence from on the Widcomm site :(
Can some kind soul show me the way
ta
Class

Similar Messages

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.

I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.

I had this problem and what I did was: read the user manual. I was actually using the wrong buttons to put the Tri-BC200 on pairing mode. I also boot my I phone. Everything worked OK. Regards.

HT1420 One computer crashed, the other was stolen along with iphone. I just got new computer & am trying to retrieve music from Icloud/itunes but it won't let me - says I need to deauthorize previous devices - how can I do that without the devices?

One computer crashed, the other was stolen along with iphone. I just got new computer & am trying to retrieve music from Icloud/itunes but it won't let me - says I need to deauthorize previous devices - how can I do that without the devices?

Deauthorize all.
Then authorize the active computers.

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking???

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking??? I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!! Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized??? I love my apple devices, but this is very frustrating. I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!! I am hoping apple will help me!!!
Thanks,
Melissa

melissafromlenexa wrote:
That is not the right device, it is the
Holux
M-1200E Bluetooth GPS Logger
I looked at the same sight for that and it does not say that. This is the first time I have posted a question, you don't have to be mean about it. I am trying to get this to work for a good cause.
It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that.

It's possible to change the device address of a NI2503 board

It would be nice to change the device address of a NI 2503 Switch board.
I have several NI 2503 Switch Boards in my PXI 1006 Chassis. After installing the boards and performing a MAX Refresh the device addresses of the boards are listed in a random (?) order. So its troublesome to get the information which device is related to which slot.
I have more than one 1006 Chassis with the same configuration of NI 2503 Boards and I may avoid to have different software versions with different device numbers for the chassis.

The short answer is no you can't modify the device numbers for the switches.
The long answer is that device numbers are set by the bios and you can't modify them. In your 1006 chasssis there are 3 buses and in each bus the devices start at some number like 15 or 20. As the slot number increases the device number decreases. The best way to view what device numbers are assigned to which slot you need to open the pxisys.ini file on your computer. The slot number and device numbers are total dependant upon your controller. The best place to verify that you have the correct ini file is to see the following webpage : PXI VXI/VME and PXI Controller Peripherals. The ini file is only an indicator of
the settings in the bios. If you change any of the devices then you will lose functionality of that board.
There is some hope though. One thing that you can do is use the IVI support for the switches. If you download the Class Drivers for switches, then you will be able to create an IVI devices and logical names in Measurement and Automation Explorer (MAX). The IVI devices will hold the address of the module (i.e. PXI0::14::INSTR). Then create a logical name that points to the IVI virtual device. This logical name can then be referenced in LabVIEW instead of the module address. Then when you need to modify the slot number/device number of a device you simply need to modify the IVI device. There is a tutorial that will step you through this process found in the Developer Zone at : Using Measurement & Automation Explorer to Configure Your IVI System
Good Luck

HT204387 Hello! Can anyone teach me how to connect iphone 4S to ipad retina using bluetooth. I tried, but the devices won't discover each other at all. I just wanted to connect to share contact details so I don't have to key in one by one. Many thanks

Hello!
Can anyone teach me how to connect iphone 4S to ipad retina using bluetooth. I tried, but the devices won't discover each other at all. I just wanted to connect to share contact details so I don't have to key in one by one.
Many thanks
Injin

You need to go to the App stores and find compatible apps. iOS device do not natively have to ability to transfer info to a computer via BT to a computer.
With iOS 8 you can use AirDrop

I have a brand new MacBook Pro . I am trying to connect to the private wifi at my house but I need the IP address of my laptop . Everywhere I go on the laptop, the IP address is blank . How do I find the IP address if laptop is not connected to the wifi

I have a brand new MacBook Pro and I'm trying to connect to the private wifi at my house however, I need the IP address. Everywhere I go to find it, the adress is blank. What do I do ?

Your Mac won't have an IP address, at least not a valid IP, until you actually connect it to your home LAN. Not sure why you think you need the IP, you don't.
To connect to your home WiFi you need to know the SSID name, IE the name of your home WiFi, and the password for it. Once you have those two things click the little antenna looking icon on the right side of the menu bar and select your home WiFi name and click connect. A dialog box will pop up asking for the password, type in the password and click OK/Connect/Whatever.

HT201240 I just got my Mac yesterday. My kids want to access sites that need the adobe player. When I try and download it asks for a password. I do not even remember setting one up? How do i find out what it is?

I just got my Mac yesterday. My kids want to access sites that need the adobe player. When I try and download it asks for a password. I do not even remember setting one up? How do i find out what it is?

FYI this is the legitimate Flash Player installer:
This one is bogus:
As X423424X wrote do not download it from any site other than the one he linked.
Adobe does not require a password to download the Flash installer. Generally speaking passwords are not required to download software, unless you must register with the website so as to log in. In that case you should never use the same name and password you use to administer your Mac.

I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
*Select : [X] "Remember search and form history"
See also:
*https://support.mozilla.org/kb/Form+autocomplete
<i>[locking thread due to the age]</i>
If you have further questions then please start a new thread.
*[[/questions/new start a new thread]]

HT4993 I'm trying to install the "RSA SecurID" application on my new iPhone 5s, but I need the device id. Can you tell me where to find the device Id?

I'm trying to install the "RSA SecurID" app on my new iPhone 5s, but I need the device id. Can you tell me where to find the device id?

-> http://www.emc.com/security/rsa-securid/rsa-securid-software-authenticators/ipho ne-and-ipad.htm

HT4623 everytime I open my setting,safari or any app that needs the internet my ipad blinks out and does not allow access

Everytime I open my setting, safari or any app that needs the internet my ipad blinks out and does not allow me access.

1. Double-click the Home button to reveal the Task Bar
2. Hold the Safari app down for a second or two until you see the minus sign
3. Tap the minus sign to close Safari
4. Re-launch and test Safari

HT4539 I recently changed My apple I.D because i forgot my last one's password, but i still have apps that need the Old I.d's Password for updates. How do i Update these apps?

I recently changed My apple I.D because i forgot my last one's password, but i still have apps that need the Old I.d's Password for updates. How do i Update these apps?

i have this problem to. can anyone help?

Issue that needs to be addressed...

Alright,
Switched to Verizon FiOS in December and TV and Phone have been excellent. One problem... The internet is terrible. Yes. I'm going to rant about the internet. Router that is supplied is low quality and what's the point of high speed internet when the signal is not good enough to deliever it! Next room over I get half the signal and speed is depleted!
Youtube is another problem. Comcast 25/5 plan could handle 1080p videos and with the 75/35 internet speed I have now can't even handle 240p video. Hooked right up to the router with an ethernet cable and speedtest.net is telling me I have 75/35 speed. With a 75/35 speed don't you think it can handle at least a 240p video clip? Constant buffering all the time. It's not Google. Worked great with Comcast. Common denominator is Verizon FiOS.
Many other people are having issues with YouTube and the supplied router and it needs to be addressed.

I point both of you to
http://www.dslreports.com/shownews/123282
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How can I read the active (plugged in) DAQs and then send that to the device name input on DAQ assist?

I have a system property node for daqmx but it does not let me change it to read when i right click on it. I am trying to have my program detect the name of the daq that is plugged in to the PC and then send that to daq assistant so that it will run properly wiithout me manually having to change the device name every time i switch hardware.
Solved!
Go to Solution.

labview12110 wrote:
Im just frustrated that the only function I have is to get a list of things that I can't do anything with. MAX knows which is active can I call it up somehow?
You have do do programming. That is what LabVIEW is. MAX gives you all the tools to do everything you want and much more just program it to do what you want.
Attached is a VI that I think does what you want. I looks at all of your devices and returns the first non simulated one. Apparently this list already excludes devices not connected to the system.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Find Non Simulated Device.vi ‏6 KB

Bluetooth dongle license that needs the device address

Similar Messages

Maybe you are looking for