Bluetooth dosen't work with GarageBand

When I connect my bluetooth headset to my mac and read an MP3 file with iTune it works but when I click play in garageband the sound is choppy?
Why?
Thx,

Sorry for double post,
I try with an other bluetooth device, and it works with this.
I don't know why.
On my SPK1200 it works, it's a speaker.
On my SHB9100 it doesn't work, it's a headset.
Both are connected on bluetooth.

Similar Messages

  • Will this work with garageband?

    Hi,
    will this device work with garageband?
    http://www.behringer.com/PODCASTUDIO-FIREWIRE/index.cfm?lang=ENG
    It has 4 inputs, so will there be four tracks in garageband or how does that work?
    Regards
    Johannes
    Message was edited by: Johannes Damsgaard-Madsen

    Hi Johannes
    It will work, as it is MAC OS compatible.
    The 4 inputs will show up in Garageband, according you open the same number of tracks and assign each of them to one input. You will most likely find the information on how to connect your audio interface to your computer (USB or FireWire), and then you read Garageband user Manual
    Just my 2 cents, I wouldn't suggest Behringer. Their high-end product may be defendable, but the lower end like this podcast station aren't always good for the sound recording. Depending of your use of the product and how professional your work has to be, you might want to consider other setups. I say that because I used to own a Behringer Mixer and it sounded like crap, not to mention all the noise. But again, the best is to go to a music store and try different ones... You're the one who will use it.
    Have fun!

  • HT204387 Is there a Bluetooth mouse that works with ipad3?

    Is there a bluetooth mouse that works with ipad3??

    This is the only mouse/cursor that works with the iPad.
     Cheers, Tom

  • HT1937 i have an iphone that i bouth in italy, but now in israel it dosen't work with the israeli sim, what should i do?

    i have an iphone from  italy, but now in israel it dosen't work with the israeli sim, what should i do?

    Contact the wireless carrier to which the iPhone is locked and
    ask that carrier if they provide unlocking and if you qualify.
    What is the exact wording of any error message you receive?

  • Does ANYBODY know how to get a Bluebird Mic to work with GarageBand?

    I bought this really expensive Blue Bluebird condenser mic and I'd REALLY like to get it to work with GarageBand. I have a cable that converts from low impedance to high impedance, then some adapters to plug the cable into my iMic, which then connects via a USB port. I know that's a lot of connectors, but it's the only way I can think of to turn the Bluebird mic into a USB mic. Can anybody help me with this? PLEASE??

    that looks, uh, complicated.
    none of it should be any more so than your current setup. if you went the interface route it would be Mic to interface interface to computer (USB or FireWire). if you went the analogue console route it would be the same, but into the iMic or Line-n on the computer
    so I would need a female to male mic cable
    standard mic cable, it's how they usually come.
    Also, do you recommend the external Phantom Power supply, or a new interface?
    that reaches more toward opinion, and also why i mentioned never using a separate power supply. you have to weigh cost vs quality (basically, what you expect from your final project).
    if it's just for kicks, and your iMic's quality satisfies you, $20 for a power supply seems cost effective. if you're looking to reach the quality of recordings you hear on the radio, a better interface would be the right choice now since you'd wind up there eventually.
    the in-between is the analogue console. having a mixer between the mic and the iMic definitely gives you more control since you can boost or attenuate the signal going to the iMic.
    so the 3 choices you have would be: Power Supply-least quality, least control. Analogue Console-same quality, much more control. more expensive interface-possibly the best quality recording as well as good control.
    since you picked a very good mic, i'd suggest looking toward a good interface like the FireBox (great Mic PREs for the expensive mic)
    hope that helps

  • Midio 1.3 doesn't work with garageband 10.0.1 can anybody help me?

    To work with my songs that i created on my ipad i installed garageband 10.0.1 so i can transfer the songs from ipad to imac garageband.
    Than came the message that the midio plugin doesn't work anymore.  Is there any plugin like midio to work with garageband 10.0.1??

    Hallo Leonie,
    ja dann hätte ich meine Frage auch auf deutsch stellen können Danke für deine Antwort. Ich kann die Version 6.0.5 paralell nutzen und es funktioniert. Eine schöne Weihnachtszeit hier mit meinem eigenen Weihnachtslied
    http://www.youtube.com/watch?v=ctKkfDgt8KI
    Danke

  • The dictionary verbace dosen't work with the 4th version of the browser !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    the dictionary verbace dosen't work with the 4th version of the browser !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    the dictionary verbace dosen't work with the 4th version of the browser !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • Fast dvd copy dosen't work with leopard

    Fast dvd copy dosen't work with leopard. Does anyone have the same problem and do you have any suggestion to making it work? I have the current version 4.06 and I have written to Velor the software people, but no answer yet.

    I received this email from velan software today regarding fast dvd copy and leopard:
    Dear Fast DVD Copy User:
    We are replying to your Support Request # 27628.
    OUR REPLY - - - - - - - - - - - - - - - - - - - - - -
    Hello,
    We're about to release a new version during this week that adds support for the new OS 10.5 Leopard.
    If you are a licensed user you will be able to update for free using your current serial number to activate the new version.
    Please keep us posted on any trouble you might find using the current version of Fast DVD Copy under Leopard OS.
    Regards,
    Velan Technical Support
    Hope this helps anyone else who has this program....

  • Windows 8 Pro configure Bluetooth GPS to work with Windows 8 internal maps programs

    How do you setup/configure a bluetooth GPS to work with windows 8 internal map programs.  So far i,ve been able to connect the GPS device to the tablet, but it only works with Microsoft legacy map programs using the COM ports ie 3,7.

    Hi,
    The devices used in Windows Store Apps must have special drivers insintalled.
    See the following document.
    http://msdn.microsoft.com/en-us/library/windows/hardware/hh454840(v=vs.85).aspx
    Juke Chou
    TechNet Community Support

  • Will a Behringer ADA8000 interface work with garageband??

    I am keen to find out whether a Behringer ADA8000 interface will work with garageband so I can go ahead and buy one.
    Thanks

    If it's Mac compatible it will work with GB. You should find about it on the product's web page.

  • Which keyboards work with garageband?????

    I know there are special midi keyboards, but i want to get yamaha or casio that i can play when not hooked up as well. Do any of the casio or yamaha keyboards work with garageband... without having to buy additional hardware.

    Yes, many! I have a Yamaha PSR-K1 that I have hooked up to my iMac, and speakers, and it will play thru either, including Garage Band of course. Some Yamahas can also play thru their own speakers. eg no hookup to anything else required, but you would best go to a Yamaha site, and post the question under CUSTOMER SERVICE to find the model. . I would think a good Yamaha dealer would also know the models??

  • Bluetooth No Longer Working With Headset

    I have a Motorola bluetooth headset that I've used with my ibook before without a hitch, but when I screwed up OS X and reinstalled it (note: reinstalled the operating system, but didn't format) it no longer works with the headset. I can connect to it just fine, but if I try to use it for anything such as switch my audio output to the headset, the program will freeze - same applies to using the headset for input. The headset isn't broken as it works fine with my phone, but my ibook won't cooperate and they are paired correctly. Is their someway to reinstall the bluetooth drivers or something to that extent? Thanks

    jrnet154 wrote:
    Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri
    If you have a headset, why use Raise to speak? Kinda defeats the purpose of the headset.
    Press and hold the button on your headest to call up Siri.

  • Bluetooth n95 not working with headset

    i have recently bought the motorola s9 bluetooth stereo headset. there are a couple of problems. it works fine to connect for the first time using the code on the phone. then if i turn the headset off and on it connects and immediatly disconnects. this is a problem but not a major one.
    the biggest problem is the music cuts out all the time for a couple of seconds. i have tried placing the phone right next to the headset and it stil happens. i have read the other n95 forums and see this is very common with the new firmware (i had already installed new firmware so i dont know if this happened on the old firmware).
    does anyone else have this problem with another headset or can anyone give me a solution. how often does firmware come out. and is it possible to delete the new firmware.

    Same problem here, unfortunately - iPhone 3G & 3.0 do not work with both the SHB6100 and SHB7100 by Philips.
    Philips SHB6100 + iPhone 3G 3.0: A2DP *does not work*
    Philips SHB6100 + Nokia and SE phones: A2DP works
    Philips SHB6100 + MacBook Leopard: A2DP works
    Sony DR-BT30Q + iPhone 3G 3.0: A2DP works
    Complaining here, however, is not really going to help as these are user to user forums and there is nothing users can do to fix this. Please report this issue at the Apple iPhone Feedback page @ http://www.apple.com/feedback/iphone.html

  • Bluetooth issue when working with Safari but not other applications

    I have tried two new bluetooth headsets (Motorola 9HD and Sony DR-BT100cx) that both can Pair with and work just fine with the local itunes application and any DVD I use. But these devices do not work with Safari. I tried going to Hulu, YouTube, etc and i can tell the bluetooth device is 'listening' because I can hear it click or wait for a signal. But I never hear anything. If i switch over to DVD or my Podcasts that are local, it works fine. If I go to bluetooth settings and select 'stop using headset' the MacBook speakers pick up right away.
    Note: I am a brand new Mac user, so please disregard my OS version I have selected. I have no idea how to find my OS version, nor do I know how to install Firefox to see if it is simply a browser issue.
    Thanks,
    Jay

    I have the same issue. I've tried 3 different btooth headsets, and they all react the same:
    - music: ok
    - skype: ok
    - webcasts / video (safari or firefox): no sound, and video stops
    HOWEVER: same system, same headset, using Internet Explorer in my windows xp VM: everything works.
    Anyone know how to contact Apple and log this issue?

  • Netflix dosen't work with website restrictions switched on.  What urls need to be defined ? thanks !

    Trying to get Netflix app to work on daughters ipad while using restrictions.  However, when websites are limited to defined URL Netflix app dosen't work.  Does anyone know what urls need to be defined to allow the netflix app to function with web restrictions switched on.  Thanks !

    I have the same issue. Tried all kinds of variations of the netflix urls (movies.netflix.com, signup.netflix.com, http://www.netflix.com, https://netflix.com etc....) couldn't get it working right... Did a mess of google searching and this thread is the only one I could find that addressed my exact issue. Called netflix and Apple. Apple was able to get it working (sort of, or temporarily....) They had me uninstall the app, then go under Settings -> General -> Reset -> Reset All Settings (make sure you know your network password for your wi-fi router before you do this, because you will need to reconnect to wi-fi because the password will get wiped out of the system memory) Supposedly, this will not remove any data, just reset to factory settings. After that was done, they had me shut down the iPad, then restart the iPad. Then reconnect to wi-fi and re-set all of the Restrictions settings I had set up originally. I left in five variations of the netflix urls because when I tried these steps with just one url it wouldn't work. I tried some testing, but couldn't figure which ones were needed so I left all five in the allowed websites section under restrictions. (movies.netflix.com, signup.netflix.com, http://www.netflix.com, https://www.netflix.com, https://movies.netflix.com). Then I re-installed the netflix app and viola! it worked! I did a shutdown and restart of the iPad while I had the apple technician on the phone to make sure the app would still work after a restart and it did! Awesome.... but, after playing with the iPad some, the app would not work again! UGGGGGGGHHHHHH! I don't think I did anything specific to cause it to stop working and repeated the procedure at least 4 times with the same result, so I'm not sure what the problem is and I don't have days to spen on this.... So, I then did a bunch more testing and here's something that seems to work all the time, although it's a bit of a pain in the arse... When the netflix app is not working, go under Settings -> General -> Restrictions -> Websites and set the "Allowed Websites" to All Websites. Then close out of settings and launch the netflix app. (give it a couple of minutes to get past the red screen with spinning wheel if it doesn't open right away). Now, once the netflix app has been launched, go back and set the "Allowed Websites" back to Specific Websites Only and the netflix app will work at least until the next reboot of the iPad... The only problem with this is that you will lose your list of Specific Websites everytime you do this... For me it's not a huge problem, because my son is only 7 and doesn't really "Surf" the web, so I don't really have to add websites all the time. Hope I helped some Stecun... Hopefully netflix and apple will take steps to make this work better in a future update.... If anyone out there has a more permanent solution, it would be greatly appreciated! Where's all the computer science moms and dads at out there?
    For reference, I'm using an iPad mini (not retina) running ios7.0.4 (11B554a). There were no other apps installed besides netflix and the factory installed ones at the time of my testing....

Maybe you are looking for

  • How many videos can Keynote handle?

    I want to do a presentation using a lot of video clips -- MOVs at 1280 x 720. The idea is to have one clip per slide... perhaps about 12-15. We want to do a presentation where we have control over clicking forward to the next video clip, with possibl

  • Org unit doubts

    Hi Gurus, Please could you help clarify / confirm : 1. Shipping point and Loading Point : I know the definitions but unclear about the assignment part. Am I right to say    - Shipping point is Not  Assigned to Loading Point. assignment not applicable

  • Custom login fails to add user to Authenticated_Users group

    We have a custom login servlet that authenticates to MS Active Directory with 9iAS 9.0.2 portal. However, none of the users are automatically added to authenticated_users group upon login. Our login servlet behaves as follows: - we do a ldap copy onc

  • # is appearing instead of Japanese characters.

    Hi All, While loading data which comprises of japanese characters, '#' values are appearing in the infocube(infoprovider) instead of japanese characters in the production system.When I load the same data in developmennt system I can see the japanese

  • Web galleries won't upload.  Keep getting error message  Help!H

    Hi I am on deadline and need to upload my images on a web page.  This has never been a problem and I upload web pages weekly.  Today I the images upload then it stops half way while building the web page and I get "An error occurred sending the file