Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]
When I connect the phone he load and then says no connect

Hi,
Please try the following driver for "MediaTek (Ralink) Bluetooth":
http://ftp.hp.com/pub/softpaq/sp65501-66000/sp65804.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Bluetooth Driver In Windows 8.1 is Not Working [Model Pavilion 15 E007TU]

Sir Where is Th Bluetooth Driver for Windows 8.1 for the Laptop of Model Pavilion g6 pavilion 1318ax
In Windows 8.1 Bluetooth Not Working

Hi @iamvinod34 ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6-1318ax Notebook and needing help with Bluetooth. Here is a link to fixing Bluetooth issues.
If that does not help try looking at the section in this document Labeled: Make sure that wireless communication is turned on. Sometimes just turning on and off the Bluetooth helps.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system. If an updated is needed this could cause this issue.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Bluetooth driver for hp pavilion g6 2006tx not working in windows 8.1

Hi Team,
I recently Upgraded my Laptop to windows 8.1.
Before i was using Windows 8, in that i used Bluetooth to send files.
But after upgrading to windows 8.1 Bluetooth is not working at all.
Product name: HP Pavilion g6 2006tx
I updated the latest windows update and in Hp assistant as well.
Kindly fix this issue.
Thank You

HI @msn-r
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that after updating to Windows 8.1, your Bluetooth is not functioning.
Have you ran The HP Support Assistant ?
Have you tried Using Automated Troubleshooting (Windows 8) to overcome this issue?
The wireless button driver affects the Bluetooth on your system. When I checked for an updated Wireless button driver for you unit and Windows8.1, I did not see one listed. I have located one that should be compatible with your notebook and Windows 8.1. Would you please try installing it. sp63752.exe
Here is a link to Using Bluetooth Devices (Windows 8) that may also be useful.
If the issue remains try these steps.
Step 1. Go to device manager
Step 2. Right click on "Bluetooth Peripheral Device" that you want
Step 3. Select "Update Driver Software..."
Step 4. Choose "Browse my computer for driver software"
Step 5. Choose "Let me pick from a list of device drivers on my computer"
Step 6. Select "Ports (COM & LPT)"
Step 7. Select "Microsoft" at "Manufacturer" list
Step 8. Finally select "Standard Serial over Bluetooth link".
If you are still unable to pair with a Bluetooth device try the following:.
Step 1. Search for "Change device" in the Windows 8 Start menu.
Step 2. Click on where it says Change device installation settings.
Step 3. Select the No, let me choose what to do option.
Step 4. Check the automatically get the device app option
Step 5. Click Save changes to save the settings you just chose.
As well you can try this.
Step 1: Go to RUN (Windows Logo + R) and type “services.msc” and Enter
Step 2: Now find “Bluetooth Support Service” and double click on it
Step 3: Now click on Log On Tab and Type in "Local Service" without quotes
Step 4. Click on “This Account”
Step 5: Now remove any passwords leave the password field blank
Step 6: Underneath the upper left title should be a hyperlink "Start" Click it
Please let me know the results.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HP P1006 driver for windows 7 (32-bit) not working

Hello. I have a problem with my printer P1006. It works fine before with windows vista but when I upgrade it windows 7 professional last month. The printer doesn't work. I tried to download the driver for windows 7 using IE and Firefox. The driver is not working and the ftp server is not serving this file
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-54963-5&lc=en&dlc=en&cc=us&...
I chat with HP customer service several times and they give me the same link and its not working and i didn't get any help at all. They told me to try it the next day and so on.... I've been trying to download since driver was released until today but its still lot working. I don't think there's a problem with my computer (HP dv5-1000us) because i'm using the same laptop on vista and it works before. I also tried to download the file on my desktop still didn't work. I hope somebody could help me fix this issue. Thank you.
Edit by Katie_H (3/30/11): Fixing broken link
This question was solved.
View Solution.

Try this link, it replaces the ftp:// with http://. Some systems have settings that preclude using ftp links.
While calling HP costs $$'s when out of warranty, there are other support methods that are free. For some products support is available by email or chat. And of course there is always this forum, where other users may have an answer.
Edit by Katie_H (3/30/11): Fixing broken link
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Bluetooth driver for Windows 7

I just upgraded my IdeaPad S10 from XP to Windows 7 Professional. The XP Broadcom Bluetooth driver on the Lenovo website does not work for Windows 7. Help? Does anyone know where I can find a Windows 7 driver for the Broadcom Bluetooth adapter on the Lenovo IdeaPad S10?
Thanks in advance - Avrec

Hi and welcome , i dont think your problem is the same..
Did you Switch your wireless on ?
did you push on the Right Side of the S12 for example (you didnt say which machine you use
But on S10-2 & S10 machine they have a switch on the covercase too !
S12 Wireless Switch On Off on the left side
Fn-F5 Menue Seperate Soft Switch
Windows 7 Driver download extract !! and setup ...
After BT install procedure
Click on BT Network on desktop that initial install all devices
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Windows media player will not work as no DVD driver

Had to format disk (trojan) & reinstall Windows XP home. Now Windows media player will not work as no DVD Driver, can I download from Toshiba site?

Hi
Usually the Windows media Player is not able to play DVD movies IF no plug-ins were installed.
To watch DVD movies you can use the programs like WinDVD or PowerDVD.
Such programs were designed especially for the DVD playing!
But you can also visit the Microsoft website and search for plug-ins for Windows Media player.
Then you could download and install it to play DVD with WMP
Best regards

Audigy Platinum Ex Windows 7 SPDIF IN not working

Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Windows 2008 R2 does not work on Sunfire X4170

Hi, I recently bought a used X4170 server and have a weird problem. Windows 2008 R2 does not work, but 2012 does. I tried RTM version and a version with SP1. The problem is this:
After installing, I set the password and windows just displays a blank desktop, sometimes it boots but freezes soon after - the mouse cursor moved but nothing else works.
Booting in Safe Mode works and Windows do not freeze. The Event Log contains lots and lots (about 20 per second) of these entries:
Log Name:
System
Source:
Microsoft-Windows-WHEA-Logger
Date:
6/21/2014 12:24:59 AM
Event ID:
17
Task Category: None
Level:
Warning
Keywords:
User:
LOCAL SERVICE
Computer:
WIN-SOGS2TPM334
Description:
A corrected hardware error has occurred.
Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)
Bus:Device:Function: 0x0:0x0:0x0
Vendor ID:Device ID: 0x8086:0x3406
Class Code: 0x30000
I have tried updating the driver for this device (downloaded from Intel), no difference. Is there a way to make Windows 2008 R2 work on this server?

Hello
Thank you for the update.
Please refer the below Knowledge document related to this issue:
Windows BSOD WHEA_UNCORRECTABLE_ERROR(124) & correctable WHEA events when disabling network ports on X4170M2/X4270M2 (Doc ID 1576683.1)
However above document talks about X4170M2, I would suggest you to follow and if issue persist, please open Service Request with Oracle to diagnose further.
Best Regards
Bhavyesh

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

How do I copy messages in a Mail folder to a flash drive? Drag and drop is not working.

How do I copy messages in a Mail folder to a flash drive? Drag and drop is not working!

Try doing a save as to the desktop and then try dragging thr .rtf file to the usb drive

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work-can't find how to change DPI

Right click on your Desktop and select Screen Resolution
Then in the screen that comes up, click on Make Text or Other Items Larger or Smaller
Then move the slider under Change the Size of All Items to Smaller and restart windows 8

I am running Office 2013. Trying to sync my reminders with my iphone using icloud for windows, but it is not working. Can anyone please help?

I am running Office 2013. Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working. Can anyone please help?

Windows media player is not working

windows media player is not working while i am playing any audio/video. it is saying server execution is failed

Please post your Product number (please don’t post your serial number).
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser

Hi Apple Team,
Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser. When I enter the user name and password the page is keep on loading it never completes the page load. I installed chrome browser on my Ipad and opened my sharepoint windows authentication site it is working fine.
Device : IPad 2
OS : IOS 7.0.6
Thanks,
Baskar

Hi Suhasini,
Please refer below links for your issues. It seems you are having problem with 32 bit and 64 bit component in office and IE.
http://howididit-sharepoint.blogspot.in/2012/04/datasheet-view-not-working.html
http://alpesh.nakars.com/blog/datasheet-view-does-not-work-in-sharepoint-2010/http://support.microsoft.com/kb/2266203
Thanks and Regards, Shailesh B. Davara

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]

Similar Messages

Maybe you are looking for