Bluetooth drivers driver for lion 10.7 OSX

I deleted my blue tooth drivers on accident and my key board and bluetooth device want work How do I reinstall the driver for lion 10.7 OSX?

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry.

Similar Messages

  • How do you insert thumb drive for lion?

    I have a Mac Desktop -- I just purchased the thumb drive for Lion -- I am lost as to where I am supposed to insert it -- do i need a special flash usb drive etc.?

    Hello, Rudy.
    I'd suggest examining the sides of your MBP's case - mine has a USB port on each side, but it dates from 2005 or so.  (I just looked, and it appears currently manufactured MBPs still have two USB ports, but they're both on one side of the case.
    Good luck
    srb

  • Best driver for lion for canon mp530?

    What is the best driver for lion for canon mp530?  My scangear goes into rainbow-whirligig action when I try to scan.

    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp530#DriversAndSoftware

  • Printer Driver for c4680 using Mac OSX 8.5

    I have a Mac Book Pro with OSX 8.5 and have an old HP Photosmart c4680 printer that I want to use.  I have tried to download the driver for this printer and get an error message that says "Can't install the software for the HP Photosmart C4600 series because it is not currently available from the Software Update server."  Does this mean that there is no driver for this OS X 8.5?  Thanks

    Hi Charliered,
    Welcome to the HP Forums!
    I understand that you are having trouble installing your HP Photosmart c4680 printer on Mac OS X 8.5, and I am happy to help you with this issue!
    I am assuming you are meaning Mac OS X 10.8.5. If that is the case, please see this installation guide. OS X v10.8 Mountain Lion: Installing and Using the Printer on a Mac with Mountain Lion.
    If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • SSD drive for Lion?

    I have a Mac Pro Desktop. It is 2007 vintage with duo core. I presently have two hard drives in it, and am running Snow Leopard. I would like to add a SSD drive and install Lion on it. I would like to be able to boot from either Lion or Snow Leopard. After I create the Lion drive would I need to copy all my applications from Snow Leopard? I want Lion SSD to be only used for booting and running Apps. I will use the other two drives for storage.
    I am thinking about maybe a 60GB SSD drive? Has anyone had any experience, with SSD drives and what brands would you recommend?
    Any thoughts or suggestions would be appreciated.
    Thanks
    Carl

    If you redirect Accounts to another location (not on the Boot Drive) you need to direct them back there again after a restore.
    SystemPreferences > Accounts/User&Groups > ...
    ... Unlock the lock, then hold down Control as you click on an Account to get access to the Advanced Options pane.

  • Driver for Samsung ML-1675 OSX 10.9.1

    Hi, can anyone write me where I can found the driver for the printer Samsung ML 1675 to use with my new MacBook withe OSX 10.9.1?

    According to this, that printer is not supported by a built-in OS X 10.9 driver.
    http://support.apple.com/kb/HT3669#samsung
    Ask Samsung if they have one.
    Barry

  • Iphone bluetooth device driver for windows 7 os

    My laptop says it cannot connect via bluetooth because it doesn't have the the device driver for my windows 7 os - can someone point me to it as I am having difficulty finding it - thanks

    what are you trying to do?
    the only thing windows can use an iphone for bluetoothwise is
    teething it's internet connection (it being the iphone)

  • Open gl driver for 8600m under Mac OSX

    Hey,
    Does anyone know when Apple would update the opengl driver for 8600m in SR MBP?
    Are the planning to update it for gaining performance?

    Mate, u gave a very interesting reply~
    As I know, many laptop manufactures suffers updating driver with their products (or they stop updating driver after a year). As a result, consumers are forced to use official driver. However, ATI and nVidia also prevent end users to install their lastest driver on any laptop products. This is annoying us that have to search the "crack" inf on the Internet in order to install the latest driver.
    Although Apple did not accurately announce the performance and functions of 8600m, usually, people estimate/expect these performance from reading review or benchmark from similar products. The performances of a piece of computer are depend on hardware itself as well as software. Driver is the main key to determine how would the hardware would perform. Unfortunately, todays they are selling their product by promoting the name of the hardware. Without much knowledge in computer, consumers do not know these performance software issues behind these hardware. Personally speaking, I suggests that this kind of inconsistency is a kind of misrepresentation in commercial activity. I wish that there is a kind of law would state that these computer products must provide or will provide a mature driver (which at least 80% of what the hardware claimed) within 3 months after the product release on the market.
    regards from a law student.
    Anyway, please tell us what u get from calling apple.

  • HT5048 i want to download window 7 x64 driver for my macbook pro OSX Lion 10.7.3

    Can you help me to share link to download Window 7 x64 drivers Macbook Pro OSX Lion 10.7.3

    You would only damage the recovery partition if you repartitioned the drive.  Simply erasing the volume is fine.  (The drive and volume are often used interchangeably, but they're not.  The drive is the physical device, encompassing everything on it, including all partitions.  Each partition on the drive is a separate "volume."  So the Macintosh HD on an out-of-the-box Mac is not actually the drive, it's a volume that takes up most of the drive.)
    So, just erase with Disk Utility, then reinstall the system and as soon as the setup assistant starts, just quit that program and shut down the machine.  When your brother turns it on, it will be as if he were turning it on for the first time.
    Note that if you have any sensitive data, you may want to do a secure erase in Disk Utility instead of a normal erase.  You may not need to keep your data safe from your brother, but you should consider what might happen if the machine were stolen from him, for example.

  • Is there a CanoScan LiDE 60 Driver for Lion?

    Mac OS X Lion does not seem to have a driver pre-installed for the CanoScan LiDE 60 scanner. There also is no current option for a lion driver on the scanner's Manufacture support web site. Does anyone know a way to fix this?

    Below is the FIX that I received from Canon - long but it works!!!
    We are currently in the process of updating the listings on our website.
    However, the 10.6 drivers are compatible with OS 10.7/Lion.
    If you upgraded from 10.6 to 10.7, the drivers will have to be
    reinstalled.  The steps below will show you how to remove the drivers
    from the system.  If any items are not listed, move on to the next step.
    Please perform the following:
    1. From the Finder, hold the 'Control' key on your keyboard and click
    the 'Go' menu at the top of the screen.
    2.  Open the 'Library' folder.
    3.  Open the 'Image Capture' folder, then open 'Twain Data Sources'.
    4.  Trash the CanoScan CanoScan XXXX.ds file.
        4-1.  Make note of any other files that may be in this folder.  If
    other files are present, move them to the desktop for now.  Then place
    them back after successfully using the scanner.
    5.  Return to the 'Library' folder.
    6.  Open the 'Preferences'
    7.  Locate and trash the 'CanoScan XXXX' folder.
    8.  Close the window and double-click on the Macintosh HD icon.
    9.  Double-click on the folder named Users.
    10. Double-click on the folder named Shared.
    11. Trash the folders named CanoScan, or starting with CNQL.
    12. Return to the applications folder and Trash the CanoScan Toolbox
    folder.
    13. Open the Macintosh HD.
    14. Open the 'Home' icon on the left (has a picture of a house).
    15. Open the Library folder.
    16. Open the Preferences Folder.
    17. Locate any items named "CanoScan Toolbox", send it to the trash.
    18. Restart your computer, then empty the trash.
    Once this has been done, we will reinstall.  To get your CanoScan LiDE
    60 operating on your Mac, please follow these steps:
    1.  Visit Canon's website at:          http://www.usa.canon.com/cusa/support
    2.  Just below 'Please choose your product from the menus below:',
    select your model in the following manner:
      2-1.  Under Product Type, choose Consumer & Home Office.
      2-2.  Under Product Family, choose Scanners.
      2-3.  Under Product Series, choose CanoScan Series.
      2-4.  Under Models, choose the CanoScan LiDE 60 and click 'GO'.
    3.  On the Support page for the your unit, click the 'Drivers &
    Downloads' tab.
    4.  Choose [MAC OSX] from the Operating System drop down box.
    5.  Expand the Driver listing, then click on the LiDE 60 Scanner
    Driver, [lide60osx11131en.dmg].
    6.  Read the License Agreement on the next page, and if you agree,
    click on 'I Agree - Begin Download' at the bottom.
    7.  A File Download box should appear. When it does, select Save.
    8.  When the Save As box comes up, click Save.
    10.  Once the download is complete, close all windows.
    11.  Once the download is complete, go back to the top and click on the
    'Support & Service' tab and then click on the 'Drivers & Downloads' tab.
    12.  Choose [MAC OSX v10.6] from the Operating System drop down box.
    13.  Click on the CanoScan Toolbox, [cstbosx5014ej4.dmg].
    14.  Read the License Agreement on the next page, and if you agree,
    click on 'I Agree - Begin Download' at the bottom.
    15.  A File Download box should appear. When it does, select Save.
    16.  Double click [lide60osx11131en.dmg] to install the scanner driver.
    17.  Double click [cstbosx4934ej4.dmg] to open the CanoScan Toolbox,
    follow the steps to complete the installation. 
    Once this process is complete, open the CanoScan Toolbox and use the
    Save function to test the scanner.

  • Epson Pro 3880 Print Driver for Lion?

    Epson state in an article on their web-site entitled  "Mac OS X Lion Instructions (article 187366) that "Mac OS 10.6 drivers are compatible with Mac OS 10.7" Well, no they aren't, or not for my 3880 anyway. I specifically checked this out prior to installing Lion, and if I had known my 3880 wouldn't work, I would not have upgraded.
    Is there any sort of work-around? If Epson's delays in getting compatible drivers when Snow Leopard came out are anything to go by, we could be in for a long wait.
    When I asked Epson about this, they told me they only received Lion on the same day as it was released to the public. Can this be true?

    Yep, same here.  For users upgrading from 10.6 to 10.7 Lion you will need to delete the printer from System Preferences, re-install the latest Epson 3880 driver (v6.6 as of today), add it back in System Preferences and you'll be golden.
    Thanks GageManning.

  • IGo Stowaway Ultra-Slim Bluetooth Keyboard Driver for Curve 8330

    I just got the IGO Stowaway Ultra-Slim, my Curve 8330 can see it under discovery, and asks for code, I type in 123 enter and 123 on the keyboard and no response,, I have been been following all sorts of links but no luck, The IGO Site (thinkoutside) is terrible and advises they have discontinued support for their keyboards.. 
    HAS anyone been sucessful getting the two devices to link up?
    If I don't get it to work, I am putting it back on EBAY,,,  
    Thanks in advance
    D

    Hi...
    In the quick setup here are the bullets....
    Configuring the keyboard:
    1. From the BlackBerry main screen, launch the Stowaway Keyboard application.
    2. Select Yes at the "Enable Bluetooth?" prompt.
    3. On some BlackBerry devices, when launching the Keyboard application, you may see an
    "Insufficient Permissions" status. In this case, it is necessary to change the BlackBerry's
    application permissions for the Stowaway keyboard application. The following permissions
    must be set to "Allow": Bluetooth, Interprocess Communications, Device Settings,
    Keystroke Injection, and Security Timer Reset. If any of these options are set to "Deny",,
    the keyboard application will provide an "Application Permissions" button that will take you
    directly to the Permissions screen. The options will have already been set correctly for you, you
    need only Save them with the BlackBerry "Save" menu option. (Note: If a "Device Options"
    button displays instead when you launch the Stowaway Keyboard application, you will be given
    manual instructions for setting and saving these permissions.)
    4. Once the Application Permissions have been saved, place the keyboard in Discoverable
    mode by simultaneously pressing the <Ctrl> <Left Fn> <Right Fn> keys on the Stowaway
    Ultra-Slim Keyboard. This is indicated by the Keyboard Status Light (above the <T> key),
    flashing green once per second.
    5. Within the Stowaway application, select "Connect to Keyboard" from the menu.
    6. If prompted, enter the numeric-only passkey of (1-9 digits of your choosing) on the
    BlackBerry device using the dialpad, and press the Trackball or Track Wheel button or the
    <Enter> button.
    7. Type the same passkey on the keyboard using <LFn+numbers> using the number row, and
    press <Enter> on the Stowaway Ultra-Slim keyboard. If the passkey process succeeds, the
    keyboard should be connected within a few seconds.
    8. You may receive a prompt to "Allow connection to a local port?". Select "Yes", and the
    driver will be available for connecting to your Blackberry.
    Message Edited by hmeister on 10-12-2008 09:04 PM
    +++++++++++++++++++++++++++++++++++++++++++++++++
    If successful in helping you, please give me kudos in my post.
    Please mark the post that solved it for you!
    Thank you!
    Best Regards
    hmeister

  • Which is better ex drive for lion iMac seagate or lacie?

    which  is better fit for my imac 10.7.2 lion seagate ex hd or laCie ex hdrive?

    E. None of the above.
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  • Need help with driver for Canon Selphy CP810 osx 10.8.3

    I need help to get my Canon Selphy CP810 running .
    Could not find a driver that works on the WEB.

    Here's a driver from Canon for 10.8.x.
    Clinton

  • TS3253 Need Bluetooth peripheral driver for IPAD 2 on PC with Windows 7

    I have Windows 7 on my PC.  One of the devices I have conntected to the PC is my IPAD 2.  I keep ketting a trouble shooting message that my bluetooth peripheral device has no driver.  Can anyone tell me where I can download this driver?

    Huh??  What exactly are ou trying to connect to your iPad via Bluetooth?  If you are trying to connect your iPad to your PC, you can't.  Bluetooth on iPad is specifically designed to pair Bluetooth Headphones, Keyboards and Speakers.  Nothing more.  And try as you might, there is no way you can download a driver of any kind to any iOS (iPad, iPhone, iPod) device.

Maybe you are looking for

  • How to sync folder on Macbook pro with external portable drive

    Hello, I am new to mac environment.  I would like to sync up my itunes library from my PC to Macbook Pro. I currently backup my itunes on PC using synctoy 2.1  to  portable drive. I am able to copy folders from portable drive onto macbook pro but wou

  • Error in Import Abap step for MI 7.1on AIX oracle

    hi guys, i am installing sap MI 7.1 on AIX on oracle.while installing i am getting the following error in the import abap step INFO: 2011-01-28 04:15:08 Data codepage 1100 is determined using TOC file '/oracle/MIP/oraarch/51033237/DATA_UNITS/EXPORT_1

  • OBIEE Answers - Weird error occurence

    In Answers, I have defined a few items and when they are all hidden the request gets executed fine. If I unhide even a single one of them, then I get the following error:- Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR

  • X-Fi Platinum + ASUS P5N32 Deluxe + New install = No Sou

    I haven't seen anything speaking to a problem like this, so please slap me if I missed it. I just installed a new system, and I have an X-Fi Platinum that I love from a previous system that I want to carry over. Unfortunately, when I install it in th

  • 10.4.5 killed Mighty Mouse?

    None of the extra buttons (apart from scroll wheel) seem to work after update. Preference's are still set.