Bluetooth fails to connect to mouse after reboot/sleep
My bluetooth mouse (an Arc Touch) fails to get connected when my MacBook Pro starts up or comes out of sleep mode.
So I reset the mouse and "pair" it again, removing the previous entry for it, and the mouse works again.
If I then power off and restart, it fails and shows up as "not connected".
Have to "pair" it again, every time.
This was working fine until I upgraded to OS X 10.2.2.
I've reset the SCM and PRAM with zero success.
Any further things to try?
Ok Rb621,
Follow the same procedure as you have done before. Exception - At the restart, boot into Safe Mode. You don't have to log in. Wait a while, have something else to do. During this time, OS X will clear some caches. Come back and restart normally and see what happened.
Have fun
Leo
Similar Messages
-
Bluetooth problems: prefs revert to defaults after reboot
Hi there,
I have a strange problem with Bluetooth and wireless input devices. I have set up Apple wireless keyboard and mouse, and also ticked "Show Bluetooth status in the menu bar" in Bluetooth preferences. However, after I reboot bluetooth icon disappears from the menu bar, and Magic Mouse prefs revert to defaults.
Apart from that, I am not able to tick "Allow Bluetooth devices wake up this computer" in Preferences – Bluetooth – Advanced.
What can it possibly be?
Before that I had the same issue with Dock (its icons would return to a certain state every time after reboot, no matter how I'd change or rearrange them before restarting). I managed to solve Dock issue by trashing Dock .plist files. I guess it may be the same with Bluetooth, but I don't know which .plist to trash this time (tried deleting com.apple.Bluetooth.plist, it doesn't work).I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?
-
IPad fails to connect to WiFi after OTA update to iOS 6
After the OTA update to iOS 6 my new iPad fails to connect to my WiFi network at home. My LANCOM router reports the following issue:
Index: 62294
Zeit: 19.09.2012 21:08:28
Interface: WLAN-1
Ereignis: Rejected Association from WLAN station xx:xx:xx:xx:xx:xx []: ()
Adresse: xxxxxxxxxxxx
Grund: Cannot support all requested capabilities in Capability Information field
It has worked flawlessly in the past with iOS 5 on my new iPad and iPhone 4. At the moment I hestitate to update my iPhone too.
Anyone with the same issue or an idea how to fix it?
Thanks in advance, greetings from Stuttgart (Germany),
JensLook at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Can't connect to EM after rebooting Red Hat 4 Enterprise on VMWare 5.5
I new with linux, so it took me some time to learn how to install Oracle 10g on Linux OS, after successful installation I rebooted Linux.
Oracle instance wasn't started automaticaly, I was able to start Oracle and start isqlplus, but I wasn't able to start em.
Than I'm trying to connect localhost:1158/em I'm geting error: The connection was refused when atempting to contact localhost: 1158.
I tried run emctl and I got error:
TZ set to US/Eastern
EM
Configuration issue.
/u01/app/oracle/product/10.1.0/db_1/myhost.com_orcl not found.I'll try to do that but after installation everythingwas working and I was able to connect to EM amd isqlplus
After reboot I started db manually and run isqlctl in order to start isqlplus but emctl doesn't work
what port to specify 1158 ?
I got error,, ehere log file:
Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-config' set to true
Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'UPDATE_EMAIL' set to true
Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'dbcontrol' set to true
Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'create' set to true
Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: /u01/app/oracle/product/10.1.0/db_1
Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EM_HOME value: /u01/app/oracle/product/10.1.0/db_1
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SID value: orcl
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: This is expected, as we might be calling it from a non-rac home
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Error retrieving the local node for the cluster
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster Error Message: PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 isDBC: false
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 agentHome: null isCentral: false
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 agentHome: null isCentral: false
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user:
Oct 31, 2006 12:24:52 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:24:52 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Oct 31, 2006 12:24:52 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Oct 31, 2006 12:24:56 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: PORT value: 1158
Oct 31, 2006 12:25:05 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Oct 31, 2006 12:25:05 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:05 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:09 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: DBSNMP
Oct 31, 2006 12:25:09 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:14 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EMAIL_ADDRESS value:
Oct 31, 2006 12:25:15 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: MAIL_SERVER_NAME value:
Oct 31, 2006 12:25:15 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:25:15 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value:
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value: yes
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LOG_FILE.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u01/app/oracle/product/10.1.0/db_1/cfgtoollogs/emca/orcl/emca_2006-10-31_12-24-46-PM.log.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: DBSNMP
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: orcl
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 1132500459
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: orcl
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter EMAIL_ADDRESS.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: orcl
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties to /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties.emca.tmp
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties has been copied to /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties.emca.tmp
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /u01/app/oracle/product/10.1.0/db_1/sysman/config/emoms.properties to /u01/app/oracle/product/10.1.0/db_1/sysman/config/emoms.properties.emca.tmp
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /u01/app/oracle/product/10.1.0/db_1/sysman/config/emoms.properties has been copied to /u01/app/oracle/product/10.1.0/db_1/sysman/config/emoms.properties.emca.tmp
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /u01/app/oracle/product/10.1.0/db_1/sysman/emd/targets.xml to /u01/app/oracle/product/10.1.0/db_1/sysman/emd/targets.xml.emca.tmp
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /u01/app/oracle/product/10.1.0/db_1/sysman/emd/targets.xml has been copied to /u01/app/oracle/product/10.1.0/db_1/sysman/emd/targets.xml.emca.tmp
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 agentHome: null isCentral: false
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 isDBC: false
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 isDBC: false
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_orcl.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_orcl.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_orcl.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_orcl.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /u01/app/oracle/product/10.1.0/db_1/oui
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /u01/app/oracle/product/10.1.0/db_1/oui
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [u01/app/oracle/product/10.1.0/db_1]
Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/app/oracle/product/10.1.0/db_1
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: 5540 from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_localhost.localdomain_orcl
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: 5520 from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_localhost.localdomain_orcl
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: 1158 from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_localhost.localdomain_orcl
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /u01/app/oracle/product/10.1.0/db_1/install/staticports.ini
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: /u01/app/oracle/product/10.1.0/db_1:myhost.com:null:orcl:{}:null:{DBCONTROL_HTTP_PORT=5500, RMI_PORT=5521, JMS_PORT=5541, AGENT_PORT=3938}
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_orcl.
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_orcl value: 3938
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_orcl.
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_orcl value: 5500
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_orcl.
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_orcl value: 5541
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_orcl.
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_orcl value: 5521
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: orcl : {DBCONTROL_HTTP_PORT=5500, RMI_PORT=5521, JMS_PORT=5541, AGENT_PORT=3938}
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to /u01/app/oracle/product/10.1.0/db_1/cfgtoollogs/emca/orcl/emca_repos_create_2006-10-31_12-25-22-PM.log
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: ORA-20001: SYSMAN already exists..
ORA-06512: at line 17
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-20001: SYSMAN already exists..
ORA-06512: at line 17
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeScript(SQLEngine.java:841)
at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:265)
at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:306)
at oracle.sysman.emcp.EMReposConfig.createRepository(EMReposConfig.java:360)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:182)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at /u01/app/oracle/product/10.1.0/db_1/cfgtoollogs/emca/orcl/emca_repos_create_<date>.log for more details.
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at /u01/app/oracle/product/10.1.0/db_1/cfgtoollogs/emca/orcl/emca_2006-10-31_12-24-46-PM.log for more details.
Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error creating the repository
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:194)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412) -
Bluetooth fails to connect headset
[bluetooth]# info 00:16:74:76:1F:61
Device 00:16:74:76:1F:61
Name: ST BUDDY R19
Alias: ST BUDDY R19
Class: 0x200404
Icon: audio-card
Paired: yes
Trusted: yes
Blocked: no
Connected: no
LegacyPairing: no
UUID: Headset (00001108-0000-1000-8000-00805f9b34fb)
UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
[bluetooth]# connect 00:16:74:76:1F:61
Attempting to connect to 00:16:74:76:1F:61
Failed to connect: org.bluez.Error.Failed
[bluetooth]#I would imagine this is because you are trying to connect to a device that Bluez doesn't have a supported profile for.
Bluez5 removed support for HSP/HFP headsets. -
Bluetooth fails to connect after 10.6.7 install
I recently upgraded from 10.5.8 to 10.6.7. Prior to upgrade, I had a Bose Soundlink bluetooth device which I used extensively and loved. After the upgrade, I could not connect to the device. It showed in the list of known bluetooth devices, but upon connection try, it connected only for a sub-second, then would disconnect. Thinking the config might have been munged, I deleted the Bose Soundlink bluetooth device, then used Bluetooth setup assistant to find it again. It will NOT find it.
My daughter's MacBook Pro running 10.6.6 also will NOT find the Bose Soundlink device, but our 2 MacBooks WILL discover each other.
Nothing has been done to Soundlink -- it worked perfectly before OS X upgrade.
Is this a known problem? How can I fix?
Many thanks for reading.Hi markl_me
Thank you for the hint, it also OS 10.6.7 - I tried one evening in vain and its so easy, press the bluetooth button on the soundlink until the Macbook Pro has registered it.
Happy New Year.
G
P.S.: also works great with the ipad 2 OX 4.3.3 -
Siebel 8.1.1 on linux - server fails to connect to gateway after stop/start
I have a very stubborn symptom in my environment, with Siebel SIA 8.1.1 [21111] on OEL 5 2.6.18.
Everything will be working fine after initial install, then I stop the Siebel Server and Gateway, start the services again and the Siebel Server fails to start. The NameServer.log complains that the server cannot connect to the gateway configuration store, and that the login password is incorrect. However it was just working minutes prior. Once it fails like that I can fiddle with it all day and still the Siebel Server will not start.
I have tried a number of suggestions found, verifying the odbcsql command works, verifying the memory files *.shm is not still in the admin directory, making sure all approp. processes are closed after stopping the siebel server, recreating the gateway and siebel server services, rebooting the vm.
The symptom and log messages never change. Once in a while for no apparent reason the siebel server will start again but sure enough if I stop it, it won't come back up.
I have a couple of environments that I have worked with and tried things but both experience the same symptom.Good one. For reference its detailed in
[Siebel CRM 8.1.1 DataDirect License file IVSE.LIC is missing from Gateway Name Server (Doc ID 751784.1)|https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=751784.1&h=Y] -
BEFW11S4 wireless connection lost after reboot / sleeping
I am using the linksys wireless router BEFW11S4 version 4, firmware version 1.5, to connnect two winXP computers, one a desktop (wired) and one a laptop (wireless).
The wireless connection was created using the EasyLink Advisor software (support.linksys.com). The wireless connection made by this software to my laptop has no signal strength problems. A wired connection to my laptop also has no problems.
However, if a wireless connection is made, it is broken when my laptop is restarted or sleeps (power saving mode). The sysTray indicates a wireless connection that has "limited or no connectivity". I cannot browse the internet. The EasyLink advisor automatically detects a problem and prompts ot repair it. Though after a few steps the EasyLink Advisor indicates that a "wireless connection failed to be made", the sysTray shows a healthy connection, and it becomes possible to browse at this point.
I'm hoping to make a connection that doesn't need to be re-established every time I leave my computer. Has anyone experienced a similar problem?Carrot, thanks very much for your message. I tried updating the "firmware" -- is that what you meant by drivers?
By following the instructions at http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4030&lid=7771778881B05,
I upgraded the firmware which involved performing a factory reset on the router, and re-establishing the network using the EasyLink Advisor.
All of the steps were carried out easily according to the instructions and there were no hitches or exceptions. The wireless connection made was strong and usable. At this time I added my second (desktop) computer which has a wired connection, by following the "add another computer" wizard in EasyLink Advisor.
This completed the re-setup of my network with new firmware.
I then restarted my wireless laptop, and, unfortunately, the connection was lost, as usual.
any other suggestions?
Thanks again! -
SQL Server Agent fails to connect to DB after enabling mirror on failover cluster
Hello:
We have multiple databases running in a Failover Cluster instance: SQL 2012SP1 on Server 2008 R2 failover cluster (NOT AlwaysOn). We are trying to add a high-performance mirror in a standalone instance for DR. My understanding is that should be a perfectly
normal, supported configuration.
The mirroring is working properly; however, the clustered SQL Server agent is unable to run jobs that run in the mirrored databases.
We get the following in the job log: Unable to connect to SQL Server 'VIRTUALSERVERNAME\INSTANCE'. The step failed.
There is a partner message in the agent log: [165] ODBC Error: 0, Connecting to a mirrored SQL Server instance using the MultiSubnetFailover connection option is not supported. [SQLSTATE IMH01]
The cluster is not a mulitsubnet cluster. All hosts are connected to the same subnets and there is no storage replication. I can not find any place where I can adjust the connect string options for SQL Agent.
Any guidance or suggestions on how to resolve this would be appreciated.
~joeSQL Team - MSFT:
Thank you for taking the time to research and provide a clear answer.
This seems very much a workaround and very unsatisfactory.
You are correct, there is an IP dependency with OR condition. Moving to an AND condition is not viable for us. The whole point is to provide network redundancy. With an AND condition, if EITHER network interface fails, the service will go offline or fail
to come online without manual intervention. This is arguably worse for uptime than having a single interface available.
We are in process of rewriting all our SQL jobs to start in tempdb before transitioning to the appropriate target database. If this works for all of our jobs, I will mark the above response as answer.
Again, thank you for the answer.
Regards,
Joe M. -
WLC 5760 - AP2600i failed to join ap-group after reboot
Hi,
We're deploying a couple of 2600i with an WLC 5760.
We've configured an AP group, named it "factory", and then issued the command ap name AP<ip mac address> ap-groupname factory for both APs. After the restart, both AP were on the AP-Group factory.
The problem is that is we reboot or power off the APs, one will join automatically the AP-Group factory and the other goes to default-group and requires the ap name APAPf872.ead7.31da ap-groupname factory to join the AP group factory again.
Any suggestion? Is it possible to forced the ap-group configuration directly on the cli of the AP?
WLC1#sh ap groups
Site Name: default-group
Site Description:
WLAN ID WLAN Name Interface
AP Name Slots AP Model Ethernet MAC Location Port Country Priority GroupName
Site Name: factory
Site Description:
WLAN ID WLAN Name Interface Radio
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
APf872.eaa6.fc69 2 2602I f872.eaa6.fc69 default location Te1/0/1 PT 1
APf872.ead7.31da 2 2602I f872.ead7.31da default location Te1/0/1 PT 1
debug ap group
(AP joining the apgoup factory)
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 1 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 2 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 3 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 4 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 5 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 6 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 7 for ap APf872.eaa6.fc69 apgroup factory
(AP joining the default-group)
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 1 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 2 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 3 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 4 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 5 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 6 for ap APf872.ead7.31da apgroup default-group
Kind regards,
Vasco CostaWe've used a another group of 2600i APs and it seems that this problem only occous with AP "APf872.ead7.31da" so this is not a WLC problem.
closing case -
Update fails to connect to server after hours of spinning
when I open the fire Fox browser I get a message that I should apply update to FireFox right away. When I click the box it goes out looking for the server ..... forever. Never comes back with any message.
If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
I have 2 hands free devices which both worked perfectly with my old 6630. Problem is that neither will pair with my new 6280? In fact it looks like the only thing it will pair with is another 6280 or my old 6630. I know the hands free are both OK as my old 6630 connects fine.
Any ideas?
TIAAlso just tried a GPS receiver and that connects fine so what's wrong with the other 2 devices? They are both fairly new but the phone doesn't see them at all!
-
Wifi not re-connecting on startup, after exiting sleep mode, etc.
For a while we had this issue with our wireless network, but as you can see the issue was resolved using the fix mentioned.
Now, we have a new problem. Approximately once per day (or more), my iPhone, after waking it up, will not re-connect to the wireless. It'll ask me to connect to a network, my network will show up, but when I click on it, it either says "Unable to Connect to Network" or asks for the password, I put it in, and then it says "Unable to Connect". We experience this on all of our family's devices...iPod Touch, iPhones, laptops, PS3...everything. The only solution we have found is to unplug the router, after which everything works fine. It's sporadic, unpredictable, and really annoying.
I've tried to keep track of when it occurs, but it's nearly impossible. The only difference I notice is that when a lot of the family are gone (like on vacation), it doesn't happen. So I don't know if it's the fact that there's so much traffic on the router that it can't handle any more device connections, or if it's one specific device that is making it knock off the other device.
Any help would be greatly appreciated. Thanks!Well it depends which router you are using.. and how many devices that you are trying to connect with the router..
-
Apple TV not connecting to iTunes after computer sleeps FIX
I've tried everything over the course of several months and this one looks to be the FIX.
Fix:
1. Open "System Preferences". ( computer only), (Windows computer unknown)
2. Open "Network".
3. Click on the "Sprocket with down arrow".
4. Select "Make Service Order"
5. Move the connection your using (Wifi, Ethernet, etc.) to the top, and click Apply.
6. If you selected Ethernet, then turn OFF Wifi in the top menu.
7. Shut DOWN your computer and then restart after completely shutting down.
7a. Either restart or unplug and plug in the Apple TV (insure your logged into Home Share after restart).
7b. Start iTunes (insure your logged into Home Share).
Done, and your welcome!Same here, not sure what the problem is...
-
Speaker balance altered after reboot/sleep
Every time I reboot or start my Mac from sleep the speaker balance is altered and set to full right. I would guess there is a currupt settings file somewhere. Tired of adjusting speaker balance the first thing I do when I start my computer and need help to fix this.
Hello worldofkane,
It may help to reset your Mac's PRAM.
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen
Maybe you are looking for
-
Creative Audigy 2 NX Bit Depth / Sample Rate Prob
This is my first post to this form Down to business: I recently purchased a Creative Audigy 2 NX sound card. I am using it on my laptop (an HP Pavilion zd 7000, which has plenty of power to support the card.) I installed it according to the instructi
-
My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?
-
I just installed two OCZ Vertex 2 60Gb SSD into my Mac Pro and I'm about to set them up into a Raid 0 array but I'm wondering what's the best setting for "block size" on these? The volume will be used as system/apps/lightroom-catalog primarily. Thank
-
Need to see the Stock!!
I have the requirement : The stock transfer takes place between two plants under the same company codes. The requirement is that the Stock is expected back after some time. Plant A gives 10 Pc to Plant B 10 Pc Plant B must return these after some tim
-
When trying to open more tabs in safari by pressing the +sign my Safari just shuts down! I can't have more then one tab open at the time. What can I do? I have re-booted my iPad mini and I have updated the software. Please help :) Malin