Bluetooth files not coming in received N8

files not coming in recevied files in my nokia n8. every time i send any file to my nokia n8 via bluetoot it goes to inbox (c) and i want it to go to e:recevied fies.. cant transfer large files and some some time zip filed goes to receved files but it does not take larg files..what to do..pl help

@gaurav_j
Welcome to the forum!
Is your N8 running Symbian Anna or PR1.2?
Have you tried deleting existing pairings and starting again?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

File not generated in receiver end For ECC to file scenario.

HI Experts,
WE are facing issue while processing messages from ECC to file. Here we are able to see messages getting processed in MONI but was not able to see any log in receiver communication Channel or any file getting into receiver end.
Could you please guide me the steps to debug this issue.
thanks & Regards,
Ranganath.

hi ranganath dasari ,
You got success message in SXMB_MONI......file is not placed into target directory.
first you need to check receiver communication channel for file. check the parametrs you are giving in receiver file adapter and your receiver communication channel active or not.
regards,
ganesh.n

Message not coming to Receiver system - File to RFC

I have a small problem in File to RFC connection. We are trying to create a PO using a BAPI. In the XI system , it shows the XML is processed successfully but PO is not generated in the R/3 system.
Is there any way to check whether the message has come to the receiver system. In fact we tried with a dummy insert command in a Z table . Even thats not happening. I thing the message is not at all coming to the receiver system, but the SXMB_MONI in Xi shows the message got processed successfully.
Do we need to make any settings in the Receiver system?

hi,
did you commit this bapi:
a) in the rfc adapter (in your communication channel) if you have sp14
b) in the bapi wrapper if you have < sp14 ?
https://websmp206.sap-ag.de/~sapdownload/011000358700000328352005E/HowtouseBAPandccBPM.pdf
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

File not coming at FTP server

Hi,
I am doing Idoc to File scenario...In receiver communication channel FTP server is to be used...Data is processing successfully in sxmb_moni...but its not visible at FTP server....have checked at all the places...
Please help.

this can be for the following reasons...
1. your File adapter might throw some error ( check RWB-->Adapter monitoring)
2. Data might be stuck in Queue ( TO-BE-Delivered state) cehck in adapter engine or cache
3. Since you are sending data to the remote server, it's so happens sometimes if the idle time is more from one file is sent and for another file it the gap is more then you might have to reactivate the file adapter and run the interface.
4. Check is there any batch file running on the FTP by legacy which are moving the files form that location...
5. Make Sure you are sending the data ( No empty files Careated).

Date format in CSV file not coming as required

Hi,
I have a problem in date format after it is downloaded as a CSV file. In CSV file it is coming as 2/6/2009
but the format i required is 2009/02/06. Im using GUI_UPLOAD FM for file download. In the internal table im having the date in this format YYYY/MM/DD only.
How can i bring the date in CSV file in required format?
Thanks in advance,
Srilakshmi.

Hi Srilashmi,
You question really made me wear thinking cap.
When you populate date in SAP system, it's taken in internal format i.e YYYYMMDD, though you declare date field as DATE, D or SY-DATUM, the issue comes into light, when you got to display it.
1. Import date in internal format i.e. YYYYMMDD,
DATA:
w_date type d.
2. Declare another variable w_date1(10) like C.
3. Goto System-> User Profile -> Own Data -> Defaults -> Date Format. Now, whatever date you have set, it's gonna take the same format.
4. WRITE W_DATE TO W_DATE1, transport imported date to char type w_date1, this makes date appear in format you want it to .
And regarding, saving in CSV format, not always GUI_UPLOAD or GUI_DOWNLOAD works,
TEXT _ CONVERT _ XLS_TO_SAP -> From program to excel sheet
ALSM_EXCEL_TO_INTERNAL_TABLE -> Excel sheet to Program
Hope this helps you.
Thanks: Zahack

Zero Values SO Line are not coming to Receivables

Hi,
In a Sales Order, we have 2 lines for a same a item where in one line has a cost of 15 and other will be 0. After processing the sales order and interfacing to Receivables, we got only the line of 15 but not the 0. Customer wants to print both the lines on the invoice. Can anyone help me on this. 0 line didnt cme to interface lines also.
Regards,
Sravan.

Sravan
Is the workflow used for the both lines same (line type)? Did you check whether the rows are stuck in the interface table of AR? Check the workflow status monitor for the second line and see if the line actually processed through the Invoice interface node?
Thanks
Nagamohan

Some pdf files not coming through in Mail

Different people have sent me pdf files and having trouble.
yesterday someone sent 2 at once and then sent 1 each and it worked.
today someone sent 1 and it didn't work
What happens is that the pdf file is with the email if I look in View Source but the regular Adobe pdf icon does not show up in the mail window or as an attachment, what shows up is a small black square. When I drag the square to the desktop and try to open it this is the message:
Adobe Reader could not open '45605_060608[1].pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
ANYONE ELSE having a problem with pdf's in Mail?
COULD IT BE Adobe Reader? I did have to upgrade it a couple days ago.
Thanks in advance.

Nope, rebuilding not a fix.
Problem has to do with sender using Exchange server. Narrowed it down to one company (GE no less)... used to have a .doc file problem and had to use TNEF's Enough ...
I can access the pdf's using my webmail... it's just when Apple Mail get's involved... but it's a "on their end" encryption issue, not Mail, it would probably be a problem if I used Entourage or some other mail client.
Thanks for all help!

Imported files not coming in at 0,0

I hope this is not a double post, but I dont see the previous post come up in Recent..
Anyway, when I import images or video they never come in at 0,0. Often the are at x 0.45, y 0.45. And thats if I hit ctrl+1 to center the stage. I understand that I can edit multiple frames but its a real hassle. I only saw one other post on this subject from 2007. Am I one of only two people that have this issue?
Thanks in advance

Having some similar problems and unfortunately some different ones as well...
I would love to know any tips you might have in identifying the "faulty" PSD files that Aperture 3 cannot deal with or more like the the PSD files that FAULTY Aperture cannot deal with (they worked fine in 2.1.4, Preview, iPhoto, etc).
I ask because the problem I have is that as soon as I hit one file that never finishes generating a thumbnail for, then I am done since everything else just queues up behind it and I can't diagnose anything else. As I said in an earlier post, HOW HARD CAN IT BE TO INCLUDE USEFUL DIAGNOSTIC INFO IN THE "ACTIVITY WINDOW", so that we could tell which images are being "processed" (or more importantly not being processed).

Layered .PSD files not coming in correctly?

I select an object in PS and copied it to a new layer, and did nothing more to the image. So now the image consists of the object on a new layer separated from the background image. I save the file as a .PSD, and bring it into Premiere CS6 with the option to import as individual layers. Now when I bring both images into the Timeline to reassemble the image, they do not line up! The object that I selected, copied and placed on the new layer does not line up with the one behind it. It displays down and to the left of where it originally was. I also tried this by making a selection in PS and cutting to a new layer instead of copying and had the same result. What am I doing wrong?
Thanks!

Is the PSD 8-bit RGB? Was it made on a Mac or PC? Are each of the layers rasterized or in bitmapped form?

Files not yet been created at Target side

Hi,
Scenario is IDOC to 4 files. (Multimapping)
My scenario is working fine and got the successfull messages in Moni and checked all the 4 messages received properly.
But, when i go to the target directory there the Files not yet been created.
I have created 4 Receiver Agreements and 've used for File Content Conversion for my Target directory and the file name is "xxxx.dat" format for each receiver file.
For Content conversion :
Recordset Structure : Raj
Raj.fieldSeparator : 'nl'
Raj.endSeparator : 'nl'
Could you please let me know why the files not created at receiver end.
Regards,
Y.Raj.

Hi,
First of all i would say thanks to all of you for your valuable replies...
Finally am getting the files at receiver end. But, i don't know why the reason
when am trying to resend the inbound payload from RWB the message getting succesfully in MONI. But there was no files.
But, when i trigger the IDOC from R/3 then the files been created at target.
Thanks & Regards,
Y.Raj.

TS3048 Bluetooth File Exchange had been started but not by me?

Bluetooth was off.
I had however checked and confirmed bluetooth was off, since some other device seemed to have had bluetooth activity that was not initiated by me.
i.e. an iPad 1 had bluetooth turned on, but also not by me.
The bluetooth options in OS X were as restrictive as possible, with the advanced settings options all unchecked except reject incoming audio requests.
Of course Discoverable was off.
However when I logged back in the "Bluetooth File Exchange" app was running.
I defintely did not start it, since I do not use bluetooth, and was not actually aware of the app until then.
The Bluetooth File Exchange app had a small window up asking whether I wanted to Turn Bluetooth on or quit.
However looking at the process in activity monitor (attached below) it seemed to be sending and receiving msgs.
How is this possible?
Are there any logs I can check to see whether any files were transered and/or to see how the app was started?

Hi Ianerskine,
Welcome to the Forum. I am sorry to hear about the problems you have had with your account recently. I would like to take a look at this to see what is going on. Please could you email me your BT account details and a link to this thread? My email address can be found by clicking on my profile.
Thanks
Paddy,
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Not able to receive data via bluetooth: curve 8520

hi guys..i have bb curve 8520. i m nt able to receive data from other mobiles or pc via bluetooth. the mobiles & system can be paired with my BB but i cannt receive data from others. also it gives error message FILE TRANSFER SERVICE NOT AVAILABLE

Hi and Welcome to the Community!
See this KB:
KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones
If your other device is non-BB, then substitute, in the KB, the appropriate instructions for your other device. Unless you are on BB OS 6 or 7, do not skip the "Receive Using BlueTooth" step on the receiving BB...nothing will transfer if you do.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Not producing a receiver file though scenario is succesful

Hi,
I have file adapter on the receiver side
The scenario is working good and generating a file on the target side when I select the Message protocol as "File"
But when I select "FCC" and execute, it is NOT generating a file on the receiver directory
though I can see the message process succesfully in SXMB_MONI
Thanks and regards
Nikhil.

I am getting the following error message in communication channel monitoring
"Channel has not been correctly initialized and cannot process messages"
I have specified all required CC parameters correctly
what could be the problem?
regards,
Nikhil

Sharepoint 2013, event receiver to rename files not working

I coded an event receiver (ItemAdding) that renames for example a .txt file to a .text file (it does not matter the extensions, it is just an example). In my code what I do is to an SPFile.MoveTo operation. It works fine in SP2010 but when I execute
the same code in SP 2013, when the operation is done using IE I get the text "Sorry, something went wrong" and then "File Not Found".
In the logs this is what I see:
12/23/2013 15:48:49.16 w3wp.exe (0x17B0)                       0x0AC8 SharePoint Foundation
General                       ai1wu Medium System.IO.FileNotFoundException: The system cannot find the file specified.
(Exception from HRESULT: 0x80070002), StackTrace:    at Microsoft.SharePoint.SPWeb.GetFileOrFolderProperties(String strUrl, ListDocsFlags listDocsFlags, Boolean throwException, SPBasePermissions& permMask)     at Microsoft.SharePoint.SPFile.PropertiesCore(Boolean
throwException)     at Microsoft.SharePoint.SPFile.get_Length()     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadPage.OnSubmit(Object o, EventArgs e)     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadExPage.OnSubmit(Object
o, EventArgs e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessReque... f72b639c-77b1-5045-c3a2-b23f24ae71c0
It's clear that the Sharepoint upload code tries to do things with the original name and it does not realize that it was renamed.
Can I do something from my event receiver code like using the AfterProperties to bypass this error?
Thanks

Hi Dennis,
The issue still persists. Here is the code:
        public override void ItemAdded(SPItemEventProperties properties)
            SPSecurity.RunWithElevatedPrivileges(delegate()
                try
                    OutputDebugStringA("Inside ItemAdded");
                    string szHttpUrl = properties.WebUrl + "/" + properties.AfterUrl;
                    SPWeb openedWeb = properties.Web.Site.OpenWeb(properties.Web.ID);
                    SPFile spf = openedWeb.GetFile(szHttpUrl);
                    EventFiringEnabled = false;
                    string szUrl = properties.AfterUrl;
                    szUrl = szUrl + ".renamed";
                    string szNewFileName;
                    if (szUrl.LastIndexOf('\\') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('\\') + 1);
                    else if (szUrl.LastIndexOf('/') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('/') + 1);
                    else szNewFileName = szUrl;
                    if (properties.ListItem != null)
                        properties.ListItem["Title"] = szNewFileName;
                        properties.ListItem.Update();
                    spf.MoveTo(szUrl);
                    EventFiringEnabled = true;
                    base.ItemAdded(properties);
                    OutputDebugStringA("Renaming to " + szUrl);
                catch (System.Exception exception)
                    OutputDebugStringA("ItemAdded ERROR: " + exception.ToString());

OC4J:home is not coming up after deployment of war file(i.e demantra war)

Hi,
The oc4j:home services is not coming up in OracleAS 10.1.3.2 Middle Tier after deplyment of war file(j2sdk 1.4.2_10)
I tried so many times bouncing but oc4j:home is not coming up. Below is the status.
Please guide me and help me.
D:\product\10.1.3.2.0\OracleAS_10\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=WG8LSW3J:6201
2 of 3 processes started.
ias-instance id=OracleAS.WG8LSW3J.ced.corp.cummins.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
--> Process (index=1,uid=687477649,pid=5304)
time out while waiting for a managed process to start
Log:
D:\product\10.1.3.2.0\OracleAS_10\opmn\logs\\default_group~home~default_grou
p~1.log
The log file of default_group~home~default_group~1.log
08/09/30 19:41:51 Start process
WARNING: Code-source D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\WEB-INF\lib\activation.jar (from WEB-INF/lib/ directory in D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\WEB-INF\lib) has the same filename but is not identical to /D:/product/10.1.3.2.0/OracleAS_10/j2ee/home/lib/activation.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader demantra.web.demantra:0.0.0.
WARNING: Code-source D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\WEB-INF\lib\mail.jar (from WEB-INF/lib/ directory in D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\WEB-INF\lib) has the same filename but is not identical to /D:/product/10.1.3.2.0/OracleAS_10/j2ee/home/lib/mail.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader demantra.web.demantra:0.0.0.
2008-09-30 19:42:01,650 [OC4J Launcher] DEBUG appserver.system :: Configuration file loaded > D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\conf\logconf.lcf
2008-09-30 19:42:01,650 [OC4J Launcher] DEBUG appserver.system :: Logs will be dumped to D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\conf\..\logs\collaborator.log
2008-09-30 19:42:01,650 [OC4J Launcher] DEBUG appserver.system :: Logs will be dumped to D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\conf\..\logs\integration.log
2008-09-30 19:42:01,665 [OC4J Launcher] DEBUG appserver.system :: Value for parameter client.javaPlugin.downloadUrl was not specified, using ../plugin/
2008-09-30 19:42:01,681 [OC4J Launcher] DEBUG appserver.system :: Starting Service Demantra Application Server/7.1.1 (118)
08/09/30 19:42:01 ................................2008-09-30 19:51:11,747 [OC4J Launcher] WARN appserver.system :: Object is not valid :
Invalid EXTRA_FRON and EXTRA_WHERE expressions, missing expected join for EXTRA_FROM tables: BRANCH_DATA, therefore EXTRA_FROM and EXTRA_WHERE expressions will be ignored, Series: 'Event Sim'.
2008-09-30 19:51:11,747 [OC4J Launcher] WARN appserver.system :: Object is not valid :
Invalid EXTRA_FRON and EXTRA_WHERE expressions, missing expected join for EXTRA_FROM tables: BRANCH_DATA, therefore EXTRA_FROM and EXTRA_WHERE expressions will be ignored, Series: 'Evt Cost'.
Please anybody help me .
Thanks & Regards,
Ravi Kumar

You might want to check these logfiles:
D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\logs\collaborator.log
D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\logs\integration.log
These logfiles should give you more clues. Seems it is missing some "objects", but what these objects are is rather undefined.

Bluetooth files not coming in received N8

Similar Messages

Maybe you are looking for