Bluetooth for Mini ?

I can't tell from the Apple website: does the Mini come with built in bluetooth like the MacBooks it borrows so much of its specs from?
If not, then, what do Mini users recommend to add bluetooth to their Mini?
--PS

Yes, the mini does have built in bluetooth.

Similar Messages

Ipad mini retina cannot share hot spot with Bluetooth for Iphon5

Ipad mini retina cannot share hot spot with Bluetooth for Iphon5
But When my Iphon5 share hot spot with Bluetooth for Ipad, I can share.

Dear Texas,
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
Ipad and Iphone can connect bluetooth.
Yes, if Iphone5 share hot spot Bluetooth for Ipad mini. (Work fine)
But when Ipad mini (IOS 7.04) share hot spot Bluetooth cannot connect with Iphone5.
Adisornj

Does the latest Macbook Pro support Apt-X bluetooth for hi-fi audio?

Hi
I have read that the latest Mac Mini supports Apt-X Bluetooth for high quality audio transfer, and that Apple is introducing this technology as standard in its products, but am wondering if the mid 2010 Macbook Pro also supports this?
If not does anyone have experience using either the Creative or Sennheiser USB dongles with the Macbook Pro? I am hoping to use the QED LIVE uPLAY receiver which supports Apt-X with the Macbook Pro, and would be interested to hear about other people's experience of this device or similar devices.
Thanks
Nick

If you check out the teardowns on ifixit.com, it would seem that the Macbook, Macbook Pro and Mac Mini all use the same Bluetooth + 802.11n part from Broadcom: BCM943224PCIEBT.
I'd imagine that if the hardware and software are the same that bluetooth support of these 3 machines should also be the same. However, I can't find any evidence for or against this. Perhaps people with these machines could test it out. Better yet, perhaps makers of apt-x supporting headphones could test this out as it may help sales. Best yet, perhaps Apple could state this on their tech spec pages if indeed these machines support apt-x...

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

Can I create a template in LR4 (for mini sessions, senior portraits, etc)

Hey All-
I am looking to create templates (for mini-sessions, senior portrait session, etc. to use on FB & Website.) Through a significant amount of research, it looks as though Photoshop and PS Elements seems to be the only places to do this? Is it not possible in LR4?
I appreciate any feedback! Thank you.

http://community.office365.com/en-us/f/154/t/61145.aspx
Are you meaning to create sites on SharePoint Online by invoking web services in your own program? SharePoint Online indeed provide some web services for custom programming, however, the web methods for creating a new site seems not included in them. Here
are some resources for the development of SharePoint Online for your reference:
SharePoint Online for developers
http://msdn.microsoft.com/en-us/sharepoint/gg153540.aspx
Code example for SharePoint Online: Accessing Web Services
http://code.msdn.microsoft.com/office/SharePoint-Online-0bdeb2ca
As to create a site collection, the parameter "Template" is the name of the template you want to use, as to find the name of the custom site template, you can use the powershell command "Get-SPOWebTemplate",
it will list all the templates with the names.
Note, The Template and LocaleId parameters must be a valid combination as returned from the Get-SPOWebTemplate cmdlet.
Also check
http://stackoverflow.com/questions/21268629/creating-new-site-collection-in-office-365-from-an-app
If this helped you resolve your issue, please mark it Answered

I just got the 5s, every time in try to update my apps it's asking for a second password to an Apple ID that is not mine-- it asks for mine and then another one pops up after I enter mine .what do I do?

I just got the 5s, every time in try to update my apps it's asking for a second password to an Apple ID that is not mine-- it asks for mine and then another one pops up after I enter mine .what do I do?

where did you get this phone from

Can i get Bluetooth for my ipod touch 2G..????

Is there any possibility if i can get Bluetooth for my ipod touch 2G..????

i'm very much thankful to u about this.. can u tel me whether there is an availability of new panels for ipod touch 2G..???? and one more quest.. its d last.. can we fix a camera for it.??? there is a rumour that we can.. so i'm asking..

Extender for Mini Display Port. Need help.

I am running a setup with a 30m optical extender for DVI. I have just upgraded to the 8-core Mac Pro with 27" display which uses mini-display port. But that will give me maximum 1920x1200 resolution that is way too low for the 27" and I have to buy a converter from mini-display port to DVI.
Is there any available extender cables for mini display port (30 meter)?

that will give me maximum 1920x1200 resolution
To go higher than 1920 wide, you need Dual Link.

How do i find the passkey to my bluetooth for my iPod because i want to pair it with my ps3

How do i find the passkey to my bluetooth for my iPod because i want to pair it with my ps3

For what purpose? If the PS3 can act like a Bluetooth speaker than just pair it, no passcode required. The iPod does not have many Bluetooth profiles. However, also see:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
iOS: Supported Bluetooth profiles

Fake Apple Macbook Pro Air VGA-Adapter for mini DisplayPort

Hello everybody,
in November 2009 I ordered a VGA-Adapter for my MacBook Pro at Amazon.de. I used it occasionally over the last year. But today it didn't show anything before a presentation. I went to a local Apple service provider and he said it's a fake one. I didn't see another one the last year, but he's right. I made some pictures you can see here:
http://www.abload.de/img/img_09276ay7.jpg
http://www.abload.de/img/img_09283len.jpg
I'm not sure but I thought I would get an official one when I bought this. I checked my feedback at Amazon (because it's from a third party seller) and I mentioned that I was wondering why the adapter was in an official DVI for mini DisplayPort packaging. It was 10€ cheaper than the regular one. Not too much to think it's not official.
It's way over warranty time, but I'm ****** it's not working after using it only 10 times over the year (just for presentations). What can I do after buying a fake one? Go back to the seller or not?

Going back to the seller would be your only recourse, although Amazon might be able to assist if the seller advertised the adapter as a genuine Apple part and sold you a fake instead. After this much time, though, there's probably nothing Amazon can do, and it's doubtful the seller will do anything either since the adapter apparently worked without problem for over a year. Even if the part were genuine Apple it would be out of any warranty at this point.
Time to just buy a new adapter, it would seem, if you haven't already.
Regards.

KVM for mini-dv?

Hi.
I've got a MacBook Pro with a mini-DVI video port and one of the new LED Cinema Displays that go so beautifully with it, also using mini-DVI. I'm getting one of the just-released Mac Minis, which also has a mini-DVI video out.
I'd like to set up a KVM switch so that I can use the Cinema Display with both MacBook and Mini, but I haven't been able to find any KVM switches for mini-DVI. The idea of introducing two additional adpaters (mini-DVI to DVI and vice-versa) is unpleasant, both from cost and mess (and possible quality) standpoints.
Does anyone know of a mini-DVI KVM solution?
Thanks,
:ian

Are you sure you don't instead mean Mini-DisplayPort? The new 24" LCD Cinema Display uses Mini-DisplayPort, not DVI.
I don't know of any KVM that switches even the full-size DisplayPort at all as of yet, and I strongly doubt that there will be any in the near future that support Mini-DisplayPort since only Apple is using that as of today.

If purchase iWork for mini mac do i need to purchase iWork again for iPad and iphonee

if purchase iWork for mini mac do i need to purchase iWork again for iPad and iphonee

Yes. Mac mini runs OS X, iPad and iPhone run iOS - different operating systems
that require different versions of Pages, Numbers, & Keynote to run. Like
the iOS version, once you purchase the version for your Mac mini, you may install
it on as many OS X desktops/laptops/minis that you own.

I work for company and we use HTC phones .. We are thinking of changing to iPhone... We use destiny pens and have been advised that apple blocks the Bluetooth for this device... Why

I work for company and we use HTC phones about a hundred .. We are thinking of changing to iPhone... We use destiny pens and have been advised that apple blocks the Bluetooth for this device... Why...?

Apple doesn't "block" that device. They just don't support the Bluetooth profiles the Destiny pen requires. You can see the Bluetooth profiles included in iOS here:
http://support.apple.com/kb/HT3647
and the profiles required for the pen here:
http://www.destinywireless.com/flash/#/thedigitalpen/compatibility/bluetooth_com patibilty/
Perhaps another pen such as the A4 Smart Pen would work for you in place of the Destiny device:
http://apenusa.com/productdetail.php?product_id=4
Regards.

SAP Solution for Mini steel plant with DRI Process

Dear all,
I am a metallurgist who spent couple of years in steel and process Industry and then moved to IT Consulting as SAP consultant / business analyst mainly working in the area of solution designing.
Here i will like to describe SAP solution for Mini steel plant with DRI proces.
u201CManufacture Productsu201D Description
The series of operations performed upon material to convert it from the raw material or a semifinished state to a state of further completion. This includes the establishment and maintenance of a CAPEX plan, the planning, scheduling and execution of production activities, the dispositioning of produced goods, the maintenance of production data, the monitoring of production performance and the implementation of engineering changes.
u201CManufacture Productsu201D Objectives
M-010
Compile 3-year CAPEX Budget     Establish the overall manufacturing goals and metrics that the organization will use to measure performance and progress towards objectives. These goals should be consistent with overall organizational strategy/value propositions. Develop long-term goals for production capabilities and manufacturing. These goals should align with the overall goals and objectives of the organization.
M-050
Perform Long Range Production Planning     u201CBudgetingu201D. Long range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Approved capital expenditures from the 3-year CAPEX budget may influence the budget. Range and frequency for budgeting is yearly.
M-060
Perform Medium Range Production Planning     Medium range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Range and frequency for planning is quarterly.
M-070
Perform Short Range Production Planning     Short term planning of production quantities based on capacities and demands as previously planned in the longer terms, actual customer demand and actual capacities. The result from short range production planning will run into the operational plan for the current and following days. Range and frequency for planning is monthly.
M-080
Schedule Production     This sub-process enables detailed scheduling by resources over the planning horizon. Planned orders that fulfill demands (Stock Transfer Requisitions, Sales Forecasts and Customer Orders defined by due-dates and due-quantities) come from the short range plan. This results in a feasible schedule, optimizing utilization of the production resources. It is based on production process constraints as well as labor resources in order to minimize production costs and also taking into account constraining raw materials availability.
M-090
Execute MRP     The purpose of this sub-process is to generate a Materials Requirements Plan (MRP) for all materials, which are produced or purchased. The MRP process involves looking at current material inventory, planned inbound material deliveries, requirements, lead times and stock levels to generate a detailed plan for future material requirements. The materials requirements will be generated with respect to the three planning horizons, short-term, medium-term, and long term. If an over stock of raw materials occurs as a result of a planning change production and marketing personnel will be informed. This would allow for the cancellations of any unneeded shipments.
M-100
Perform Setup / Changeover     Perform set-up and changeover activities on production equipment as necessary, to prepare for the production of specific materials/grades. Set-up and changeover activities will enable the production equipment to perform operations on materials, as per the specifications called out on the production order. Ensure time is allocated for first off inspection requirements after changeover.
M-110
Execute Production     Insure that the production plan is met by converting raw materials and component supplies into finished and semi-finished products. Batch/lot documentation will be created for individual production orders to provide traceability throughout the process. Each step of the production process is continuously monitored to identify mechanical, quality, and productivity issues and suggest solutions when problems arise. Data collection for performance and financial reporting enables management to take immediate action on manufacturing processes as well as conduct historical analysis.
M-120
Perform Quality Management     Quality management refers to the entire supply chain process. Process activities are related to the evaluation and inspection of key characteristics of semi-finished and finished materials. These evaluations are recorded and acted on based on the results. Report/manage internal quality problems or issues. Install and manage quality control systems to insure product quality. For supplier or subcontractor based issues this data should be used as a performance measure during the vendor evaluation process.
M-130
Manage Product Disposition     This process ensures those semi-finished and finished products that do not meet quality requirements, are prevented from being used and distributed in good finished product to customer, or released for the next step of the production process. A semi finished product is any material that needs to have another operation on line before being shipped to the customer. Finished goods are defined as any material that can be shipped to a customer; in house produced finished goods, subcontracted materials and trading goods. The information required to make decisions regarding disposition comes from the Quality Management system of each production facility. The first step ensures that raw material and returnable goods are dealt with in another subprocess. The reason for the goods not meeting quality standards is recorded along with the results of any investigation to find the cause of the fault. Information is sent to all other parties who need to know: order fulfillment, inventory management and shipping. The process ensures that the most appropriate action is taken to either dispose of, or rework the goods. Disposal or rework may be either through the original materials supplier or subcontractor, or Mittal Steel Point Lisas.
M-140
Maintain Product Related Data     u201CMaterial Master Maintenanceu201D. The Sub-Process 'Maintain Product Related Data' is the list of activities that identify the steps and decision points related to the request for and performance of additions, changes, and deletions to the Material Master file or files. This sub-process begins when a need to create, change or delete a material is identified and ends when the request is either actioned or refused. The sub-process is intended to cover all material types, including finished goods, raw materials, bills of materials, equipment and service, POS, Sundry Items etc. In fact, any product which the company wishes to inventory or purchase. A number of key strategic decisions, including a clear definition of when we issue a new material, will affect this sub-process.
M-150
Maintain Production Related Data     u201CMaster Data Maintenanceu201D. This subprocess identifies the activities related to requesting changes or additions to production related master data. Once a need for master data maintenance is identified, a request is submitted for approval. Data defining production capacities and performance standards (e.g. line efficiencies, material yields, etc.) require Corporate level approval prior to maintenance. Other data that is more specific to internal planning functions are maintained at the plant level. Maintenance requests are returned to the originator whether the request is approved or not to improve communication throughout the system. This subprocess may be triggered by: annual operations budgeting process process/production equipment upgrade or replacement change in facility work schedule (i.e. planned hours or days) change in personnel required to operate process/production equipment new products, formulations, or packaging.
M-160
Operations Execution Reporting     Gather manufacturing information at various points in the production process. Prepare management reports both at the detailed level for plant management and summary level for senior operations management. Reports will be available on-demand and will include - volume, efficiencies (mechanical, line, and labor), yields, downtime, asset utilization, environmental, safety, quality, and financial data. A major goal of this sub-process is to define a consistent method of calculating operations metrics. Some plants will use line information systems and PCSs to collect information. Not all plants are equipped with these systems and the where they do exist, the level of sophistication varies.
M-170
Manage Process Reliability     Optimize capacity by reducing process downtime and ensuring compliance to quality expectations by the reduction of rejects. Install tracking systems to measure line time utilization, quality results, process settings. Conduct root cause analysis, and use the data to develop and implement improved operating procedures.

Thank you for your prompt response. I'm assuming you are still proposing to use Sales order -> purchase order -> invoice verification -> Customer billing process flow. Is that correct?

In Primavera Risk Analysis, the MIN. ML, MAX columns is for imput the minimum impact, most likely impact , maximum impact duration of a risk or the remaining duration for MIN, ML and adding remaining duration with maximum impact for MAX?

In Primavera Risk Analysis, the MIN. ML, MAX columns is for imput the minimum impact, most likely impact , maximum impact duration of a risk or the remaining duration for MIN, ML and adding remaining duration with maximum impact for MAX?

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

Bluetooth for Mini ?

Similar Messages

Maybe you are looking for