Bluetooth hands free audio is disconnected,

Control Panel >> Sound , shows Bluetooth hands free audio is disconnected, I am not able to connect it after clicking connect. Pl help

Hello,
Please try to check this document and see if any of the troubleshooting steps help you.
Fixing Bluetooth Problems
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01590950&tmp_task=solveCategory&cc=us&dlc=en&lc...
If not, please let me know your computer model.
THanks,
I work for HP! Please remember to provide and if this helped click ON

Similar Messages

W530: Bluetooth hands-free audio problem

Hello,
I have a W530 (2438.2HU) and lately I noticed that the Bluetooth Hands-free Audio driver is disabled. The Device Manageer section for this driver states that
"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"
I went to the Lenovo driver download site; but couldn't figure out which driver to download. Could someone, please, tell me exactly which driver I have to download to fix this issue? Thanks in advance.
Regards,
bostjanv

Hi @felixchip
What do you have connected via Bluetooth? Did you try the troubleshooting steps from the link in the previous thread we were working on? Is that how you got the Bluetooth error? Does the sound work when you plug in a set of headphones? Try installing your IDT High-Definition Audio driver and let me know if you get an error message when installing it.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Dv6700 audio is bluetooth hands-free audio only

Seems a common post here, but I found no answers. I have tried what seems to be everything. My sound stopped working. The speakers listed are my bluetooth hands-free audio, which it seems are not sufficient to actually produce any sound in HP. I don't know what happened to my other drivers. I tried downloading Realtek and it downloads but will not work. I tried downloading Conexant and it downloads, but gives a failure message saying that the device is not detected.
I tried a system restore and soundworked briefly, then stopped again.
My Dv6700 is CTO. P/n is GW772AV.
I have tried going back to several restore points and it never seems to work.
The sound does not work through headphones either.
Microphone also only has Bluetooth hands-free audio.
I run Windows Vista 32-bit and have installed all of the "critical" updates and some of the recommended ones - although honestly I don't know which ones.
Thanks for any help you can provide.

HI
i also encountered the same problem..but still i dint get any solution...
Is anyone here who have the solution for this problem...i will consider him the best solution provider throughout my life ??
plz help ..
Regards-
Aashish
INDIA

Hands-free audio gateway (3250)

Hello!
How do I use the handsfree audio gateway profile on my 3250? I have installed the widcomm stack. When I click the 'Hands-free Audio gateway on 3250' icon, my phone reports a connection and correctly displays a headset icon, but it does NOT send the audio over to my PC! Instead, it just operates in 'phone' mode. Selecting speaker or anything like that in the menu during the call does not work. Am I doing something wrong?

Hmmm.. It does work sometimes when I connect the service from my PC to my phone. But I cannot connect from my phone to my PC using the bluetooth menu...

6230i connectivity with Honda Bluetooth hands free

I am having trouble maintaining the connection between the Nokia 6230i and the Honda CRV Bluetooth Hands-free system.
I have paired the two and connected them. All works fine. I can also use voice activated.
But if I switch off the Honda or the Nokia and then switch on again, the devices do not connect. The Honda system flashes the blue light and every so often beeps 3 times. I can reconnect manually, but I thought that once the devices were paired they would connect automatically.
Anyone got any advice?

I used a 6230i on an Accord with Sat Nav, and apart from the occasional problem, it worked fine. Now got a 6700 Classic and it will pair OK with the car, but sometimes works with the Honda HFT and sometimes doesn't.
Common fault is disconnecting when other phone answers when dialling from the car, and incoming calls cause the phone to disconnect from the HFT.
There is a website www.hondahandsfree.com where you can check phone compatibility.
I'm hoping a software fix will happen soon.

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

6110 and bluetooth hands free

Dear all,
I have a 6110 which I am very happy with but I have a nagging problem. Previously I had a 3210. When I paired it (3210) with my blue ant bluetooth hands free and walked out of range of the device (in my car) I would hear a beep on the phone. When I got back in range it would pair up automatically with the device. No problem.
With the 6110 when I go out of range and come back I have to pair up with the device every time, very annoying. Is there a way around this.
Kahli

"Can these Bluetooth Transmitters be used to transfer data from other bluetooth enabled devices like cell phones etc.?"
That entirely depends on if the manufacturer of said device has put that particular bluetooth service on the device. You know what I mean? Example: Browsing is a service, file transfer is a service. Not all bluetooth devices have ALL services. I found that out the hard way when I purchased a dell axim x51v a while back, it didn't have all the services that I wanted.

Can't use my car's bluetooth hands free set up when Bionic is synched

I don't know the tech jargon. I was able to pair my Bionic to my car's bluetooth hands free set up, but can't seem to use voice dialing. My car's display says that the phonebook has downloaded, and I can still take calls, but that's about it. It's very upsetting. Does anyone know a fix for this issue? I hate to return my phone for something like this.

use this
Mail Setup Assistant
http://www.apple.com/support/macosx/mailassistant/
Maybe remove and re-add the account.

N95 and Toyota Bluetooth hands-free system

On 11th March I purchased a used (55 plate) Toyota Corolla Verso and as part of the deal had the Toyota Bluetooth hands-free system installed.
Everything worked fine with my Sony K600i which has eventually given up the ghost and required replacement.
I opted for the Nokia N95 and after a short wait due to stock availability it was delivered to my home address on Friday 4th May.
My initial "very impressed" thoughts soon changed to disappointment when I tried to pair the N95 with the Toyota hands-free system...
Unlike the Sony, the phone does not automatically detect that the Toyota system is searching for it.. but I can bypass this by manually searching for other devices with the phone whilst the Toyota system is searching.
I'm then asked to input the pass code (default 1234) on the phone... which I do... and the Toyota system announces that the pairing has been successfull... connection in progress... however the phone then flashes a message stating that it is not possible to pair with the Toyota system at which point the Toyota system declares "connection failed".
I've tried numerous times now with Remote Sim on and off, deleting all paired devices and starting from scratch etc etc...
I've been and spoken to the Toyota Dealership and of course they claim that there's nothing wrong with the car kit - it worked with the phone I had when I bought the car and it's not their fault I've changed to a phone which is incompatible.
As far as I can tell, the N95 has Bluetooth 2.0 installed (so did the Sony) and I understand that this *is* backwardly compatible and as such should meet the technical requirements of the Toyota System... however the lady on the service desk at the Toyota Dealership stated that there could be other issues too, but was either not able or not willing to specify what those issues would be. She suggested that the only way they would possibly be able to do anything about it would be only if Customer Relations gave them authorisation to do so and gave me their telephone number (01737 363633).
Having spoken to Toyota Customer Relations, they simply infer that it's my fault for purchasing a phone that is not compatible - but even they declined to provide me with documentary evidence (which they claim to have) proving that it is not compatible. Instead they suggested that the only course of action I would possibly have would be to speak with the dealership.... who have of course already told me that they are not able to do anything without the say so of Toyota Customer Relations.
I get the feeling someone isn't quite telling the truth...
I figure that the only way I'm going to have any recourse with Toyota is to prove beyond doubt that the phone is compatible with the requirements of the Toyota system... according to the Toyota Bluetooth hands-free system owners manual I merely need to ensure that any desired phone supports Bluetooth hands-free profiel 0.96 or 1.0.
I've tried asking O2 - they didn't know the answer and suggested I should call Nokia.
I've called Nokia on the following numbers:
08450 545454
08700 555777
09067 547540 (premium rate £0.75 per minute)
08706 092832
08450 045555
Each without success... note that the 08706 092832 number was answered by an extremely unhelpful, arrogant lady... you can probably sense I'm beginning to get a little irate now...
I've also tried to call Nokia on 08450 045555 given to me both by the Nokia website and the arrogant lady I refer to above...
At the time of writing this post, I've had the phone to my ear ringing away for 1 hour 16 minutes and counting....
1, 2, 3, 4, 5, 6, 7, 8, 9, 10.... (Me catching my breath so as to stay calm)
Can anybody whatsoever with the slightest element of confidence tell me whether the Nokia N95 supports Bluetooth hands-free profile 0.96 or 1.0??
Any advice, assistance, stress and frustration relief would VERY much appreciated.
Regards
D.Burns-Keane

Hello again... I thought some of you may like to know that I have made some progress.
After a rediculously long time on hold with Nokia I eventually opted to hang up and call back... frustratingly I did of course get through straight away only to be told that it was actually one of their quieter days and that there was no reason (as far as the guy knew) why I should have been on hold for so long... regardless... the guy was extremely helpful.
I explained my issue in detail and he advised that as far as he knew, because the phone has Bluetooth version 2, it could/would/should be compatible.
Separately I had also emailed Club Nokia with the full details of my issue.
I had also logged an appeal with Toyota Customer Services (Head Office).
Initially Toyota's response was that technology moves so fast, specifically the mobile phone industry, that technology such as car kits etc are often left inferior. As polite as they were, they basically washed their hands of the problem putting the blame squarely at my feet for purchasing a phone that in their opinion was incompatible.
My appeals regarding viewing it as unreasonable that having only bought the car in March of this year and one part of it already being relegated to a fancy dashboard accessory that doesn't really do much apart from ignore my requests to pair with my phone, fell on deaf ears to say the least. Even though I had directed them towards this and at least one other online forum upon which other Toyota owners claimed to have had their Bluetooth system upgraded under warranty.
Then an email reply arrived from Club Nokia. It specifically stated, "this handset [Nokia N95] has a bluetooth version of 2.0 and does support the headset profile"
Of course, this prompted an immediate phone call to Toyota Customer Services again... quoting my reference number (for my earlier conversation(s) with them) and informing them of the information/clarification received from Club Nokia their tone shifted a little and I was told that they would call me back.
A couple of days later I received a phone call from Customer Services informing me that they had authorised my local dealer to upgrade the Bluetooth system under warranty.
Approximately two days later I had a phone call from the Dealer informing me that the part(s) had been ordered.
And as I sit here typing this right now, they're fitting the new system to my car.
Granted I think there's a chance both the guy I spoke to at Nokia and the emailed response from Club Nokia miss the point slightly as they appear to be relying on the fact that the phone has Bluetooth V2.0 and therefore *is* compatible... this may not necessarily be the case - somebody suggested in an earlier post that the phone is only compatible with handsfree profile 1.5...
However, if Nokia are telling me it's compatible I figured I'd quote that to Toyota and see what happened (afterall I'm not telling porkies, I'm simply passing on the info I obtained from the people who *should* know)...
I think this proves a little persistance certainly goes a long way!
(I guess I just need to test the damn thing when I get my car back later today)

Can anyone help CK-7W Bluetooth hands-free kit

Can anyone help? I have a Nokia CK-7W Bluetooth hands-free car kit installed in my vehicle. I have recently up graded my mobile phone to a Nokia N 96, the phone is connecting by Bluetooth and all off the functions seem to work, the problem is with the quality when connected to a call I am not being cut off the call but the communication keeps breaking up. I have checked whether the N 96 needs updating and it would seem it is up to date so I would assume this is not a firmware problem. On connecting and pairing my N95 with the CK-7W it works perfect.

The problem is with the firmware in the ck-7w, it is a discontinued model and will not work properly with some new phones. You will need to change to a ck-100 which will allow full benefits of the phone.
Dan
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Hi, Have an iPhone4 Just got roadster2 . more geared to Android anyone know of bluetooth hands free speaker for car most compatible for iPHone 4?

Hi,
I have an iPhone 4. Bought a Motorola Roadster2 but really geared to Android.
Will return it. Can anyone help with a reccommendation for a Bluetooth Hands Free
Speaker for car that is most compatible with the iPhone/IOS.
Thanks

OK, in Australia, the best options I have found so far are:
Powere cradle - http://www.holdmyphone.net/select-your-device.html?ddlBrands=Ford&ddlModels=Terr itory-04_09&ddlsubaccessories=0&ddlaccessories=0&hselect=Phone&hselect2=Apple&hs elect3=iPhone-3G
BT carkit with Stereo integration - http://www.ow.com.au/shop/Car-Kits-Bluetooth/Parrot-CK3000-Evolution-Advanced-Bl uetooth-Car-Kit
These are very simple to use and I havent had any issues after 12 months usage.
Parrott have quite a few advanced products which are very good.

Can I use my Bluetooth hands free device to listen/watch videos on touch 4g?

I know I can connect my motorola Bluetooth hands free device to my touch 4th gen, but does anyone know what setting to change I order to listen to music and videos through the device?

Go to Settings/General/Bluetooth and sync up the device there. Once done, you should be good to go,...

N73 - Bluetooth hands-free

I have an N73 and cannot get the phone to even recognise that a bluetooth hands-free is near the phone never mind trying to pair them! I have tried with an original Nokia bluetooth hands-free (which I know works) and a new O2 Blue handsfree. The N73 bluetooth recognises my old handset so the bluetooth obviously works. Any ideas?

Hello,
Please try to check this document and see if any of the troubleshooting steps help you.
Fixing Bluetooth Problems
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01590950&tmp_task=solveCategory&cc=us&dlc=en&lc...
If not, please let me know your computer model.
THanks,
I work for HP! Please remember to provide and if this helped click ON

Where do I find help contecting my IPhone 4 to my cars bluetooth hands free system?

Where do I find help contecting my IPhone 4 to my cars bluetooth hands free system?

Try the owner's manual or your dealer. Some in car systems have updates available to support iOS 4.
It might be hlepful if you gave us a little more information, like what kind of car, what, exactly, you've done to try to get it working and what the problem you're having is.
Some cars have systems that will do things like read you text messages and e-mail. Those features are NOT compatible with the iPhone.

Voice over for tom tom gps whilst using bluetooth hands free

Is it possible to still have the voice over for the tom tom navigation whilst being connected to a bluetooth hands free kit? I also have another charging cradle which it does exactly the same thing. it's as if it deletes it when an accessory is connected.
thanks

Yes that works, use the speakerphone mode. Some people report that the callers hear themselves via the car speakers and iPhone mic. It won't cost anything to try it and see if it meets your requirements.

Bluetooth hands free audio is disconnected,

Similar Messages

Maybe you are looking for