Bluetooth headphones not working correctly

i have the motorola s805 dj headphones, i have synced them and it worked, however i can not listen to music through the headphones, only the phone works, any suggestions?

This option is not avail yet as it will require a driver for the headset from the iPod section on the phone. I'm sure this will come out real soon, I found this out the hardway, plus the Apple Rep said this would work. I just bought a pair too, to find out they were all wrong.

Similar Messages

Bluetooth does not work correctly with Siemens Tek Connect headphone device

I hopefully tried the new bluetooth support in OS 3.0, but it does not work with my Siemens Tek Connect headphone device. It syncs as expected, but no sound is heard. I can choose the Tek Connect in the music app and other programs, my headphone (actually my two hearing aids, which are connected wireless with ear to ear communications (e2e) via the Tek Connect necklace device) signals the connection to me (a beep), but nothing is heard. Codec problem?
Andreas

I own Phonak hearing aids with their Bluetooth-capable iCom device which allows my aids to be used as a phone headset and also supports the A2DP stereo bluetooth profile. My iPod Touch 2Gen 32GB is able to play to my hearing aids properly.
One thing I noticed is that the iPod does not allow you to control the volume when using Bluetooth. It expects the headphones to be able to control the volume. Have you used your hearing aids as Bluetooth headphones on any other device? Maybe the device isn't programmed properly to set the volume while in headphones mode. I know my audiologist had to program the volume on each mode separately on my device.
My MacBook Pro is able to play music over Bluetooth to my hearing aids fine. But I have never gotten Windows to work properly sending audio to my hearing aids. Do you have a Mac with Bluetooth? Try to get that working to see if it's your hearing aid device that's causing the trouble or not.

Bluetooth headphones not working after ios6 update

I have the RF-MAB2 Rocketfish headphones. I also have an Iphone 3gs.
Both are running their latest firmware releases. After updating the iphone to IOS6 the bluetooth headphone no longer would work.
It showed paried with the iphone but music and other apps would not play any sound through the headphones.
I had to go onto the iphone, forget the device and readd it. This has resolved the issues.

I am talking about the wired headphone which received with the phone.
The problem is after the upgrade to ios6 the voice is only coming from one side ( right side ) of the headphone while listening to music.
However if I use apps like Viber, WhatsApp I can hear voice from both the side of the headphone.

Bluetooth Headphones not working with the Nano 6th Gen

I was wondering if anyone else out there has issues with using bluetooth headphone with the new nano. I have a pair of Motorola Motoroka S9 headphones and have to use the D650 Adapter with it and when I plug into the bottom of the iPod I get "Unsupported" Accessory is not supported. As I know Apple hates to put bluetooth in anything other then iPod Touch & iPhones. What's up with that?? All my other nanos 2nd & 3rd Gens work fine with the adapter......but my current and newest one doesn't. Anyone else having that issue?

SchuFlee wrote:
How did you reboot the ipod nano 6th gen?
Two things this thing needs.
1. Digital / regular watch face combo.
2. capable bluetooth headphones. Either a plug in add-on to either headphone or multi-pin port. Also a speaker of some sort to tell that an alarm is going off.
I use alarms on my watch.
more watch face designs(digital and analogue) would be awesome.

Headphones not working correctly

i got an ipod (20gb) today from apple after having a defected one. i plug it into my stereo (3.5mm to rca) and it works great. when i plug my ipod into any other headphones, i'm only getting sound out of the right side and only the left when i slighlty pull it out. not sure what's going on..
14" iBook G4 Mac OS X (10.4.2)
14" iBook G4 Mac OS X (10.4.2)

This option is not avail yet as it will require a driver for the headset from the iPod section on the phone. I'm sure this will come out real soon, I found this out the hardway, plus the Apple Rep said this would work. I just bought a pair too, to find out they were all wrong.

Logitech cordless bluetooth headphones not working with zen to

Anyone else have problems with these only coming through one speaker. Or if there was something I needed to do to fix this.

I don't have any other bluetooth devices. I wish I did that would solve the mystery on if it's the headphones. Update I just messed with the headphone adapter and I hear it in one ear then the other ear only when it's securly in there. If I have it out a little in the middle it catches both speakers sometimes. You think that is the headphones that are defecti've or my second plug in the touch. The reoson I say the second plugin spot is that it works great with simple headphone plugged in.

Bluetooth does not work correctly with Flash when dealing with audio

I have a stereo that uses bluetooth. I am on a Mac.
Everything works with bluetooth (iTunes, Quicktime) except flash.
When I play a flash video, or listen to songs using a flash player,
no sound is playing through the remote (bluetooth) speakers.

Ditto - I get the same issue with a bluetooth headset. If I
download the flash video to my mac and play it using VLC it works
fine, however the flash player chokes on it. Any ideas?

I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
Related information....
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

Line-in input not working correctly in Garageband

Problem:
Line-in input not working correctly with Garageband. Problem occurred AFTER installing and using Blue Yeti USB mic, purchased from the Apple store.
System Details:
'07 20" iMac 2.4GHz 4GB RAM, OSX 10.6.5, Garageband '11 v6.0, Logitech Z4 speakers.
Background:
Before using the Yeti USB mic, I used the line-in jack. I'd connect a Shure mic or guitars directly in, but more recently through a 12 channel mixer. Have connected the Shure mic directly into the input jack, and the computer appears to be picking it up (System Preferences->Sound->Input), it is responding correctly there. Have set the output to the headphone (line-out) jack. When I go into Garageband, I can select from Line-in 1, Line-in 2, and Line-in Stereo. The trouble is that it's the iMac's built-in mic that is active (the one above the screen), not the line-in. I've rebooted the computer, checked the connections, reconnected the Yeti mic and I can't find what's causing the problem. Not sure what to do from here, need some help. Thanks

I have Logic Express on the iMac as well and I worked out how to set the input device back to the Line-In. I went back to Garageband and found the equivalent setting under Preferences->Audio/MIDI. Thanks for reading, sorry I didn't sort it out sooner! Merry Christmas!

Sound in Macbook pro is not working correctly! PLEASE HELP!

A few days ago, the sound in the build in speakers in my macbook pro (Mac OS X 10.6.8) started not working correctly, i did not hit it or anything, just closed it down when i woke up the next day, the sound was not working correctly. i know it is hard to describe what's wrong in a written forum, but the best way to describe it is this: it sounds like when you have a set of headphones plugged in, but not wearing them. the sound is weak, with no bass. when i actualy do hear the sound when wearing headphones (in my ears) the sound is fine.
hope anyone can help.

Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM

Volume for bluetooth devices not working

I have a pair of Bluetooth headphones and since updating to Yosemite 10.10.3, I have not been able to control the volume of them with the volume keys on the keyboard or the volume in the menu bar 99% of the time. I have once gotten it to work and have no idea what I did for it to work. If I take the volume all the way to 0, it does mute the audio and the mute key still works as well.
Changing the volume manually in individual apps (such as with the slider in Spotify or in a youtube video) works but thats only when I use the mouse to move the volume slider.
I've done some searching around and it seems like Yosemite has numerous Bluetooth issues... I even had the horrendous screeching noise in 10.10.2 but that seems to be fixed now.
Mid 2009 Macbook Pro 5,3

I cheated and installed Windows 7 RC. ^.^
But something you can do is:
Click on the Start menu
In the search bar look up 'Services'
Open up Services
Double click 'Bluetooth Services'
In the 'Log On' tab check to see if 'Local Service' or 'Use This Account' is highlighted
If 'Local Service' is selected then you're SOL and you're best bet is to re-install Windows. That's what was selected on mine and no matter what Account I set it to Bluetooth would not work. I even tried re-installing the Apple drivers from the OS X disc.
But if 'Use This Account' is selected than I would look into the normal Bluetooth settings, as the problem is most likely there. You can also call MS and have them screen share with you, the guy I talked to said if 'Use This Account' was selected he could do more for me.
Anyways hope this helped a bit.

Bluetooth is not working in Iphone 4s

I am using Iphone 4s. Bluetooth is not working. it is not identifiying or identified by other phones / Laptop

That is correct. This has never been a feature of iphone/ipod/ipad.
Bluetooth is supported for stereo headsets/speakers, telephone handsfree devices/headsets, some keyboards, some peer-to-peer apps form the app store and internet tethering where provided by the carrier.
Other than this it will not connect to any other phones/computers/devices

Magic Mouse not working correctly??

I just installed the new Mountain Lion OS and now my Magic Mouse does not work correctly. First after I log in, I have to turn the mouse off and on then then it will move. When I goto the options menu for the mouse none of the addtional features are there for the mouse including the scrolling. Any suggestions?

Hi Hunters Dad. I also had this problem and it turned out to be the bluetooth connection. After I upgraded, the bluetooth connection dropped off system preferences.
To locate your bluetooth connections click on the Apple logo in top left hand corner of screen, select System Preferences and look under Internet & Wireless. You should see Bluetooth there. If you don't, then power cycle your computer (see below). Afterwards go back to the System Preferences and Bluetooth should be there.
To Power Cycle my computer Apple support had me shut down my computer, take out the power cable and all other connections for one minute then plug back in and restart as follows:
press your computer ON button and then hold down the p r command option keys at the same time until the 2nd chime. I also have been having long boot ups since upgrading and the chimes didn't come on. Applecare instructed me to stop holding the keys and the computer eventually booted up. Lo and behold the bluetooth connections were visible and my magic mouse and trackpad now work fine.
Hope this works for you.

Bluetooth headphones not working correctly

Similar Messages

Maybe you are looking for